zephyr

History

Jeppe Odgaard e26d018253 samples: flash_shell: rework dump_buffer() Add an optional compare buffer to check each byte. If the byte differ the read value will be printed as an error. Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>		2023-08-09 13:41:23 +00:00
..
boards	drivers: flash: Add Infineon CAT1 Flash driver	2023-05-08 11:16:09 +02:00
src	samples: flash_shell: rework dump_buffer()	2023-08-09 13:41:23 +00:00
CMakeLists.txt	cmake: increase minimal required version to 3.20.0	2021-08-20 09:47:34 +02:00
Kconfig
prj.conf	samples: drivers: flash_shell: do not enable CONFIG_SERIAL	2020-12-02 23:20:32 -05:00
README.rst	samples: drivers: flash_shell: disambiguate flash shell app	2022-11-19 14:24:38 -05:00
sample.yaml	tests: cleanup metadata and filtering	2023-06-13 09:38:27 -04:00

README.rst

.. _samples_flash_shell:

Flash Shell Sample
##################

Overview
********
This is a simple shell module that allows arbitrary boards with flash
driver support to explore the flash device.

Building and Running
********************

This project can be built and executed on as follows:

.. zephyr-app-commands::
   :zephyr-app: samples/drivers/flash_shell
   :host-os: unix
   :board: qemu_x86
   :goals: run
   :compact:

Sample Output
=============

.. code-block:: console

    uart:~$ flash_sample page_count
    Flash device contains 1024 pages.
    uart:~$ flash_sample page_erase 1023
    Erasing page 1023 (start offset 0xffc00, size 0x400)
    uart:~$ flash_sample page_write 1023 8 17 19 28 39
    Reading back written bytes:
    11 13 1c 27
    uart:~$ flash_sample page_write 1023 4 77 9 1 2
    Reading back written bytes:
    4d 09 01 02
    uart:~$ flash_sample page_read 1023 4 12
    4d 09 01 02 | 11 13 1c 27
    ff ff ff ff
    uart:~$ flash_sample page_read 1023 0 16
    ff ff ff ff | 4d 09 01 02
    11 13 1c 27 | ff ff ff ff