From b2c7689d2280e1e78f8c368d9dad3fee25644f2c Mon Sep 17 00:00:00 2001 From: Tony DiCola Date: Thu, 12 May 2016 12:44:44 -0700 Subject: [PATCH 1/2] Refactor to have AVR boards exclusively at top level of repo, match convention of other board package repos. --- .gitmodules | 7 - README.md | 68 +- .../adafruit/avr/boards.txt => boards.txt | 0 .../caterina/Caterina-Atmega32u4.hex | 0 .../caterina/Caterina-BluefruitMicro8.hex | 0 .../caterina/Caterina-Circuitplay32u4.hex | 0 .../caterina/Caterina-Esplora.hex | 0 .../caterina/Caterina-Esplora.txt | 0 .../caterina/Caterina-Feather32u4.hex | 0 .../caterina/Caterina-Flora8.hex | 0 .../caterina/Caterina-Leonardo.hex | 0 .../caterina/Caterina-Leonardo.txt | 0 .../caterina/Caterina-Micro.hex | 0 .../caterina/Caterina-Micro.txt | 0 .../caterina/Caterina-Yun.hex | 0 .../caterina/Caterina.c | 0 .../caterina/Caterina.h | 0 .../caterina/Descriptors.c | 0 .../caterina/Descriptors.h | 0 .../Esplora-prod-firmware-2012-12-10.hex | 0 .../Esplora-prod-firmware-2012-12-10.txt | 0 .../Leonardo-prod-firmware-2012-04-26.hex | 0 .../Leonardo-prod-firmware-2012-04-26.txt | 0 .../Leonardo-prod-firmware-2012-12-10.hex | 0 .../Leonardo-prod-firmware-2012-12-10.txt | 0 .../caterina/Makefile | 0 .../Micro-prod-firmware-2012-11-23.hex | 0 .../Micro-prod-firmware-2012-11-23.txt | 0 .../Micro-prod-firmware-2012-12-10.hex | 0 .../Micro-prod-firmware-2012-12-10.txt | 0 .../optiboot/Makefile | 0 .../optiboot/README.TXT | 0 .../optiboot/boot.h | 0 .../optiboot/makeall | 0 .../optiboot/omake | 0 .../optiboot/omake.bat | 0 .../optiboot/optiboot.c | 0 .../optiboot/optiboot_atmega168.hex | 0 .../optiboot/optiboot_atmega168.lst | 0 .../optiboot/optiboot_atmega328-Mini.hex | 0 .../optiboot/optiboot_atmega328.hex | 0 .../optiboot/optiboot_atmega328.lst | 0 .../optiboot/optiboot_atmega8.hex | 0 .../optiboot/optiboot_atmega8.lst | 0 .../optiboot/pin_defs.h | 0 .../optiboot/stk500.h | 0 build_linux.sh | 71 - build_macosx.sh | 73 - build_package.sh | 280 - build_windows.sh | 81 - hardware/adafruit/samd | 1 - hardware/teeonardu/avr | 1 - hardware/tools/avr/etc/avrdude.conf | 14382 ---------------- .../libraries => libraries}/Wire/README.md | 0 .../Wire/TinyWireM.cpp | 0 .../libraries => libraries}/Wire/TinyWireM.h | 0 .../Wire/USI_TWI_Master.cpp | 0 .../Wire/USI_TWI_Master.h | 0 .../avr/libraries => libraries}/Wire/Wire.cpp | 0 .../avr/libraries => libraries}/Wire/Wire.h | 0 .../SFRRanger_reader/SFRRanger_reader.ino | 0 .../digital_potentiometer.ino | 0 .../examples/master_reader/master_reader.ino | 0 .../examples/master_writer/master_writer.ino | 0 .../slave_receiver/slave_receiver.ino | 0 .../examples/slave_sender/slave_sender.ino | 0 .../libraries => libraries}/Wire/keywords.txt | 0 .../Wire/library.properties | 0 .../Wire/utility/twi.c | 0 .../Wire/utility/twi.h | 0 .../adafruit/avr/platform.txt => platform.txt | 0 .../adafruit32u4/pins_arduino.h | 0 .../bluefruitmicro/pins_arduino.h | 0 .../circuitplay32u4/pins_arduino.h | 0 .../feather32u4/pins_arduino.h | 0 .../flora/pins_arduino.h | 0 .../tiny8/pins_arduino.h | 0 77 files changed, 10 insertions(+), 14954 deletions(-) rename hardware/adafruit/avr/boards.txt => boards.txt (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/caterina/Caterina-Atmega32u4.hex (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/caterina/Caterina-BluefruitMicro8.hex (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/caterina/Caterina-Circuitplay32u4.hex (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/caterina/Caterina-Esplora.hex (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/caterina/Caterina-Esplora.txt (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/caterina/Caterina-Feather32u4.hex (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/caterina/Caterina-Flora8.hex (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/caterina/Caterina-Leonardo.hex (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/caterina/Caterina-Leonardo.txt (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/caterina/Caterina-Micro.hex (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/caterina/Caterina-Micro.txt (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/caterina/Caterina-Yun.hex (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/caterina/Caterina.c (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/caterina/Caterina.h (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/caterina/Descriptors.c (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/caterina/Descriptors.h (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/caterina/Esplora-prod-firmware-2012-12-10.hex (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/caterina/Esplora-prod-firmware-2012-12-10.txt (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/caterina/Leonardo-prod-firmware-2012-04-26.hex (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/caterina/Leonardo-prod-firmware-2012-04-26.txt (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/caterina/Leonardo-prod-firmware-2012-12-10.hex (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/caterina/Leonardo-prod-firmware-2012-12-10.txt (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/caterina/Makefile (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/caterina/Micro-prod-firmware-2012-11-23.hex (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/caterina/Micro-prod-firmware-2012-11-23.txt (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/caterina/Micro-prod-firmware-2012-12-10.hex (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/caterina/Micro-prod-firmware-2012-12-10.txt (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/optiboot/Makefile (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/optiboot/README.TXT (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/optiboot/boot.h (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/optiboot/makeall (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/optiboot/omake (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/optiboot/omake.bat (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/optiboot/optiboot.c (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/optiboot/optiboot_atmega168.hex (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/optiboot/optiboot_atmega168.lst (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/optiboot/optiboot_atmega328-Mini.hex (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/optiboot/optiboot_atmega328.hex (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/optiboot/optiboot_atmega328.lst (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/optiboot/optiboot_atmega8.hex (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/optiboot/optiboot_atmega8.lst (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/optiboot/pin_defs.h (100%) rename {hardware/adafruit/avr/bootloaders => bootloaders}/optiboot/stk500.h (100%) delete mode 100755 build_linux.sh delete mode 100755 build_macosx.sh delete mode 100755 build_package.sh delete mode 100755 build_windows.sh delete mode 160000 hardware/adafruit/samd delete mode 160000 hardware/teeonardu/avr delete mode 100644 hardware/tools/avr/etc/avrdude.conf rename {hardware/adafruit/avr/libraries => libraries}/Wire/README.md (100%) rename {hardware/adafruit/avr/libraries => libraries}/Wire/TinyWireM.cpp (100%) rename {hardware/adafruit/avr/libraries => libraries}/Wire/TinyWireM.h (100%) rename {hardware/adafruit/avr/libraries => libraries}/Wire/USI_TWI_Master.cpp (100%) rename {hardware/adafruit/avr/libraries => libraries}/Wire/USI_TWI_Master.h (100%) rename {hardware/adafruit/avr/libraries => libraries}/Wire/Wire.cpp (100%) rename {hardware/adafruit/avr/libraries => libraries}/Wire/Wire.h (100%) rename {hardware/adafruit/avr/libraries => libraries}/Wire/examples/SFRRanger_reader/SFRRanger_reader.ino (100%) rename {hardware/adafruit/avr/libraries => libraries}/Wire/examples/digital_potentiometer/digital_potentiometer.ino (100%) rename {hardware/adafruit/avr/libraries => libraries}/Wire/examples/master_reader/master_reader.ino (100%) rename {hardware/adafruit/avr/libraries => libraries}/Wire/examples/master_writer/master_writer.ino (100%) rename {hardware/adafruit/avr/libraries => libraries}/Wire/examples/slave_receiver/slave_receiver.ino (100%) rename {hardware/adafruit/avr/libraries => libraries}/Wire/examples/slave_sender/slave_sender.ino (100%) rename {hardware/adafruit/avr/libraries => libraries}/Wire/keywords.txt (100%) rename {hardware/adafruit/avr/libraries => libraries}/Wire/library.properties (100%) rename {hardware/adafruit/avr/libraries => libraries}/Wire/utility/twi.c (100%) rename {hardware/adafruit/avr/libraries => libraries}/Wire/utility/twi.h (100%) rename hardware/adafruit/avr/platform.txt => platform.txt (100%) rename {hardware/adafruit/avr/variants => variants}/adafruit32u4/pins_arduino.h (100%) rename {hardware/adafruit/avr/variants => variants}/bluefruitmicro/pins_arduino.h (100%) rename {hardware/adafruit/avr/variants => variants}/circuitplay32u4/pins_arduino.h (100%) rename {hardware/adafruit/avr/variants => variants}/feather32u4/pins_arduino.h (100%) rename {hardware/adafruit/avr/variants => variants}/flora/pins_arduino.h (100%) rename {hardware/adafruit/avr/variants => variants}/tiny8/pins_arduino.h (100%) diff --git a/.gitmodules b/.gitmodules index 25a7121..e69de29 100644 --- a/.gitmodules +++ b/.gitmodules @@ -1,7 +0,0 @@ -[submodule "hardware/adafruit/sam"] - path = hardware/adafruit/samd - url = git@github.com:adafruit/ArduinoCore-samd.git -[submodule "hardware/teeonardu"] - path = hardware/teeonardu/avr - url = https://github.com/adafruit/TeeOnArdu.git - branch = 1.6.x diff --git a/README.md b/README.md index 4685493..879328c 100644 --- a/README.md +++ b/README.md @@ -1,70 +1,22 @@ # Adafruit Arduino Boards -Configuration and other support files to use Adafruit's boards like Trinket, +Configuration and other support files to use Adafruit's boards like Trinket, Pro Trinket, Gemma, Flora, and more with the Arduino IDE. This is provided as a reference for modifying the Arduino IDE to support Adafruit's boards. If you -just want to program one of Adafruit's boards you probably want one of the +just want to program one of Adafruit's boards you probably want one of the preconfigured Arduino IDEs that Adafruit provides--see the learn system guide for your board for more details! +NOTE: If you want to setup the Arduino IDE to work with these boards you probably +want to follow this guide that shows an easy method using the board manager: +https://learn.adafruit.com/add-boards-arduino-v164/overview This repository is +only for manually configuring Arduino to work with Adafruit's AVR boards (and for +building new packages for the board manager). + These files are only compatible with the 1.6.x series of Arduino IDE and NOT the -earlier 1.0.x series. Starting from a fresh Arduino 1.6.x IDE install navigate -to the Arduino IDE folder and copy in files as follows: - -- hardware/adafruit: This hiearchy of files should be copied into the hardware - folder. - -- hardware/tools/avr/etc/avrdude.conf: This is a customized avrdude.conf that - should be copied directly over the hardware/tools/avr/etc/avrdude.conf file - in the Arduino IDE. The modified configuration increases the delays when - programming the ATtiny85 used in the Gemma and Trinket boards. - -- drivers: This folder contains USB drivers for Windows 8, 7, and XP. The USB - drivers should be installed when a Flora board is connected to the computer. +earlier 1.0.x series. The contents of this repository should be cloned/copied +into an Arduino/hardware/adafruit/avr folder. NOTE: Arduino IDE version 1.6.2 has a bug with supporting external cores and DOES NOT work with these files. Use Arduino 1.6.3+, or an earlier version like 1.6.1. - -## Easy Install Scripts - -Three shell scripts exist in the root that can simplify the creation of -modified Arduino IDEs with Adafruit's boards. The scripts are build_linux.sh, -build_windows.sh, and build_macosx.h and they require bash, tar, zip, and unzip -(so they should really be run on Linux or OSX, however they have only been -tested on Linux). Each script takes two parameters, the first it the name of -an input file that should be the Arduino IDE download for that platform, and -the second is the output file. - -For example the IDE builds Adafruit publishes were built with commands like: - -./build_linux.sh arduino-1.6.4-linux32.tar.xz adafruit-arduino-1.6.4-linux32.tar.xz - -./build_linux.sh arduino-1.6.4-linux64.tar.xz adafruit-arduino-1.6.4-linux64.tar.xz - -./build_windows.sh arduino-1.6.4-windows.zip adafruit-arduino-1.6.4-windows.zip - -./build_macosx.sh arduino-1.6.4-macosx.zip adafruit-arduino-1.6.4-macosx.zip - -## Running a Package Build - -Run the `build_package.sh` script and enter a new version: -``` -$ git clone git@github.com:adafruit/Adafruit_Arduino_Boards.git && cd Adafruit_Arduino_Boards -$ git submodule init && git submodule update -$ ./build_package.sh -AVR VERSION: 1.4.1 -building adafruit-avr-1.4.1.tar.bz2... -SAMD VERSION: 1.0.0 -building adafruit-samd-1.0.0.tar.bz2... -``` - -The resulting `tar.bz2` archives will then be available in the `build/` folder along with the JSON output needed to add the new versions to the package index file in the [adafruit/arduino-board-index](https://github.com/adafruit/arduino-board-index) repo: - -``` -├── build -│   ├── adafruit-avr-1.4.1.tar.bz2 -│   ├── adafruit-samd-1.0.0.tar.bz2 -│   ├── avr_package.json -│   └── samd_package.json -``` diff --git a/hardware/adafruit/avr/boards.txt b/boards.txt similarity index 100% rename from hardware/adafruit/avr/boards.txt rename to boards.txt diff --git a/hardware/adafruit/avr/bootloaders/caterina/Caterina-Atmega32u4.hex b/bootloaders/caterina/Caterina-Atmega32u4.hex similarity index 100% rename from hardware/adafruit/avr/bootloaders/caterina/Caterina-Atmega32u4.hex rename to bootloaders/caterina/Caterina-Atmega32u4.hex diff --git a/hardware/adafruit/avr/bootloaders/caterina/Caterina-BluefruitMicro8.hex b/bootloaders/caterina/Caterina-BluefruitMicro8.hex similarity index 100% rename from hardware/adafruit/avr/bootloaders/caterina/Caterina-BluefruitMicro8.hex rename to bootloaders/caterina/Caterina-BluefruitMicro8.hex diff --git a/hardware/adafruit/avr/bootloaders/caterina/Caterina-Circuitplay32u4.hex b/bootloaders/caterina/Caterina-Circuitplay32u4.hex similarity index 100% rename from hardware/adafruit/avr/bootloaders/caterina/Caterina-Circuitplay32u4.hex rename to bootloaders/caterina/Caterina-Circuitplay32u4.hex diff --git a/hardware/adafruit/avr/bootloaders/caterina/Caterina-Esplora.hex b/bootloaders/caterina/Caterina-Esplora.hex similarity index 100% rename from hardware/adafruit/avr/bootloaders/caterina/Caterina-Esplora.hex rename to bootloaders/caterina/Caterina-Esplora.hex diff --git a/hardware/adafruit/avr/bootloaders/caterina/Caterina-Esplora.txt b/bootloaders/caterina/Caterina-Esplora.txt similarity index 100% rename from hardware/adafruit/avr/bootloaders/caterina/Caterina-Esplora.txt rename to bootloaders/caterina/Caterina-Esplora.txt diff --git a/hardware/adafruit/avr/bootloaders/caterina/Caterina-Feather32u4.hex b/bootloaders/caterina/Caterina-Feather32u4.hex similarity index 100% rename from hardware/adafruit/avr/bootloaders/caterina/Caterina-Feather32u4.hex rename to bootloaders/caterina/Caterina-Feather32u4.hex diff --git a/hardware/adafruit/avr/bootloaders/caterina/Caterina-Flora8.hex b/bootloaders/caterina/Caterina-Flora8.hex similarity index 100% rename from hardware/adafruit/avr/bootloaders/caterina/Caterina-Flora8.hex rename to bootloaders/caterina/Caterina-Flora8.hex diff --git a/hardware/adafruit/avr/bootloaders/caterina/Caterina-Leonardo.hex b/bootloaders/caterina/Caterina-Leonardo.hex similarity index 100% rename from hardware/adafruit/avr/bootloaders/caterina/Caterina-Leonardo.hex rename to bootloaders/caterina/Caterina-Leonardo.hex diff --git a/hardware/adafruit/avr/bootloaders/caterina/Caterina-Leonardo.txt b/bootloaders/caterina/Caterina-Leonardo.txt similarity index 100% rename from hardware/adafruit/avr/bootloaders/caterina/Caterina-Leonardo.txt rename to bootloaders/caterina/Caterina-Leonardo.txt diff --git a/hardware/adafruit/avr/bootloaders/caterina/Caterina-Micro.hex b/bootloaders/caterina/Caterina-Micro.hex similarity index 100% rename from hardware/adafruit/avr/bootloaders/caterina/Caterina-Micro.hex rename to bootloaders/caterina/Caterina-Micro.hex diff --git a/hardware/adafruit/avr/bootloaders/caterina/Caterina-Micro.txt b/bootloaders/caterina/Caterina-Micro.txt similarity index 100% rename from hardware/adafruit/avr/bootloaders/caterina/Caterina-Micro.txt rename to bootloaders/caterina/Caterina-Micro.txt diff --git a/hardware/adafruit/avr/bootloaders/caterina/Caterina-Yun.hex b/bootloaders/caterina/Caterina-Yun.hex similarity index 100% rename from hardware/adafruit/avr/bootloaders/caterina/Caterina-Yun.hex rename to bootloaders/caterina/Caterina-Yun.hex diff --git a/hardware/adafruit/avr/bootloaders/caterina/Caterina.c b/bootloaders/caterina/Caterina.c similarity index 100% rename from hardware/adafruit/avr/bootloaders/caterina/Caterina.c rename to bootloaders/caterina/Caterina.c diff --git a/hardware/adafruit/avr/bootloaders/caterina/Caterina.h b/bootloaders/caterina/Caterina.h similarity index 100% rename from hardware/adafruit/avr/bootloaders/caterina/Caterina.h rename to bootloaders/caterina/Caterina.h diff --git a/hardware/adafruit/avr/bootloaders/caterina/Descriptors.c b/bootloaders/caterina/Descriptors.c similarity index 100% rename from hardware/adafruit/avr/bootloaders/caterina/Descriptors.c rename to bootloaders/caterina/Descriptors.c diff --git a/hardware/adafruit/avr/bootloaders/caterina/Descriptors.h b/bootloaders/caterina/Descriptors.h similarity index 100% rename from hardware/adafruit/avr/bootloaders/caterina/Descriptors.h rename to bootloaders/caterina/Descriptors.h diff --git a/hardware/adafruit/avr/bootloaders/caterina/Esplora-prod-firmware-2012-12-10.hex b/bootloaders/caterina/Esplora-prod-firmware-2012-12-10.hex similarity index 100% rename from hardware/adafruit/avr/bootloaders/caterina/Esplora-prod-firmware-2012-12-10.hex rename to bootloaders/caterina/Esplora-prod-firmware-2012-12-10.hex diff --git a/hardware/adafruit/avr/bootloaders/caterina/Esplora-prod-firmware-2012-12-10.txt b/bootloaders/caterina/Esplora-prod-firmware-2012-12-10.txt similarity index 100% rename from hardware/adafruit/avr/bootloaders/caterina/Esplora-prod-firmware-2012-12-10.txt rename to bootloaders/caterina/Esplora-prod-firmware-2012-12-10.txt diff --git a/hardware/adafruit/avr/bootloaders/caterina/Leonardo-prod-firmware-2012-04-26.hex b/bootloaders/caterina/Leonardo-prod-firmware-2012-04-26.hex similarity index 100% rename from hardware/adafruit/avr/bootloaders/caterina/Leonardo-prod-firmware-2012-04-26.hex rename to bootloaders/caterina/Leonardo-prod-firmware-2012-04-26.hex diff --git a/hardware/adafruit/avr/bootloaders/caterina/Leonardo-prod-firmware-2012-04-26.txt b/bootloaders/caterina/Leonardo-prod-firmware-2012-04-26.txt similarity index 100% rename from hardware/adafruit/avr/bootloaders/caterina/Leonardo-prod-firmware-2012-04-26.txt rename to bootloaders/caterina/Leonardo-prod-firmware-2012-04-26.txt diff --git a/hardware/adafruit/avr/bootloaders/caterina/Leonardo-prod-firmware-2012-12-10.hex b/bootloaders/caterina/Leonardo-prod-firmware-2012-12-10.hex similarity index 100% rename from hardware/adafruit/avr/bootloaders/caterina/Leonardo-prod-firmware-2012-12-10.hex rename to bootloaders/caterina/Leonardo-prod-firmware-2012-12-10.hex diff --git a/hardware/adafruit/avr/bootloaders/caterina/Leonardo-prod-firmware-2012-12-10.txt b/bootloaders/caterina/Leonardo-prod-firmware-2012-12-10.txt similarity index 100% rename from hardware/adafruit/avr/bootloaders/caterina/Leonardo-prod-firmware-2012-12-10.txt rename to bootloaders/caterina/Leonardo-prod-firmware-2012-12-10.txt diff --git a/hardware/adafruit/avr/bootloaders/caterina/Makefile b/bootloaders/caterina/Makefile similarity index 100% rename from hardware/adafruit/avr/bootloaders/caterina/Makefile rename to bootloaders/caterina/Makefile diff --git a/hardware/adafruit/avr/bootloaders/caterina/Micro-prod-firmware-2012-11-23.hex b/bootloaders/caterina/Micro-prod-firmware-2012-11-23.hex similarity index 100% rename from hardware/adafruit/avr/bootloaders/caterina/Micro-prod-firmware-2012-11-23.hex rename to bootloaders/caterina/Micro-prod-firmware-2012-11-23.hex diff --git a/hardware/adafruit/avr/bootloaders/caterina/Micro-prod-firmware-2012-11-23.txt b/bootloaders/caterina/Micro-prod-firmware-2012-11-23.txt similarity index 100% rename from hardware/adafruit/avr/bootloaders/caterina/Micro-prod-firmware-2012-11-23.txt rename to bootloaders/caterina/Micro-prod-firmware-2012-11-23.txt diff --git a/hardware/adafruit/avr/bootloaders/caterina/Micro-prod-firmware-2012-12-10.hex b/bootloaders/caterina/Micro-prod-firmware-2012-12-10.hex similarity index 100% rename from hardware/adafruit/avr/bootloaders/caterina/Micro-prod-firmware-2012-12-10.hex rename to bootloaders/caterina/Micro-prod-firmware-2012-12-10.hex diff --git a/hardware/adafruit/avr/bootloaders/caterina/Micro-prod-firmware-2012-12-10.txt b/bootloaders/caterina/Micro-prod-firmware-2012-12-10.txt similarity index 100% rename from hardware/adafruit/avr/bootloaders/caterina/Micro-prod-firmware-2012-12-10.txt rename to bootloaders/caterina/Micro-prod-firmware-2012-12-10.txt diff --git a/hardware/adafruit/avr/bootloaders/optiboot/Makefile b/bootloaders/optiboot/Makefile similarity index 100% rename from hardware/adafruit/avr/bootloaders/optiboot/Makefile rename to bootloaders/optiboot/Makefile diff --git a/hardware/adafruit/avr/bootloaders/optiboot/README.TXT b/bootloaders/optiboot/README.TXT similarity index 100% rename from hardware/adafruit/avr/bootloaders/optiboot/README.TXT rename to bootloaders/optiboot/README.TXT diff --git a/hardware/adafruit/avr/bootloaders/optiboot/boot.h b/bootloaders/optiboot/boot.h similarity index 100% rename from hardware/adafruit/avr/bootloaders/optiboot/boot.h rename to bootloaders/optiboot/boot.h diff --git a/hardware/adafruit/avr/bootloaders/optiboot/makeall b/bootloaders/optiboot/makeall similarity index 100% rename from hardware/adafruit/avr/bootloaders/optiboot/makeall rename to bootloaders/optiboot/makeall diff --git a/hardware/adafruit/avr/bootloaders/optiboot/omake b/bootloaders/optiboot/omake similarity index 100% rename from hardware/adafruit/avr/bootloaders/optiboot/omake rename to bootloaders/optiboot/omake diff --git a/hardware/adafruit/avr/bootloaders/optiboot/omake.bat b/bootloaders/optiboot/omake.bat similarity index 100% rename from hardware/adafruit/avr/bootloaders/optiboot/omake.bat rename to bootloaders/optiboot/omake.bat diff --git a/hardware/adafruit/avr/bootloaders/optiboot/optiboot.c b/bootloaders/optiboot/optiboot.c similarity index 100% rename from hardware/adafruit/avr/bootloaders/optiboot/optiboot.c rename to bootloaders/optiboot/optiboot.c diff --git a/hardware/adafruit/avr/bootloaders/optiboot/optiboot_atmega168.hex b/bootloaders/optiboot/optiboot_atmega168.hex similarity index 100% rename from hardware/adafruit/avr/bootloaders/optiboot/optiboot_atmega168.hex rename to bootloaders/optiboot/optiboot_atmega168.hex diff --git a/hardware/adafruit/avr/bootloaders/optiboot/optiboot_atmega168.lst b/bootloaders/optiboot/optiboot_atmega168.lst similarity index 100% rename from hardware/adafruit/avr/bootloaders/optiboot/optiboot_atmega168.lst rename to bootloaders/optiboot/optiboot_atmega168.lst diff --git a/hardware/adafruit/avr/bootloaders/optiboot/optiboot_atmega328-Mini.hex b/bootloaders/optiboot/optiboot_atmega328-Mini.hex similarity index 100% rename from hardware/adafruit/avr/bootloaders/optiboot/optiboot_atmega328-Mini.hex rename to bootloaders/optiboot/optiboot_atmega328-Mini.hex diff --git a/hardware/adafruit/avr/bootloaders/optiboot/optiboot_atmega328.hex b/bootloaders/optiboot/optiboot_atmega328.hex similarity index 100% rename from hardware/adafruit/avr/bootloaders/optiboot/optiboot_atmega328.hex rename to bootloaders/optiboot/optiboot_atmega328.hex diff --git a/hardware/adafruit/avr/bootloaders/optiboot/optiboot_atmega328.lst b/bootloaders/optiboot/optiboot_atmega328.lst similarity index 100% rename from hardware/adafruit/avr/bootloaders/optiboot/optiboot_atmega328.lst rename to bootloaders/optiboot/optiboot_atmega328.lst diff --git a/hardware/adafruit/avr/bootloaders/optiboot/optiboot_atmega8.hex b/bootloaders/optiboot/optiboot_atmega8.hex similarity index 100% rename from hardware/adafruit/avr/bootloaders/optiboot/optiboot_atmega8.hex rename to bootloaders/optiboot/optiboot_atmega8.hex diff --git a/hardware/adafruit/avr/bootloaders/optiboot/optiboot_atmega8.lst b/bootloaders/optiboot/optiboot_atmega8.lst similarity index 100% rename from hardware/adafruit/avr/bootloaders/optiboot/optiboot_atmega8.lst rename to bootloaders/optiboot/optiboot_atmega8.lst diff --git a/hardware/adafruit/avr/bootloaders/optiboot/pin_defs.h b/bootloaders/optiboot/pin_defs.h similarity index 100% rename from hardware/adafruit/avr/bootloaders/optiboot/pin_defs.h rename to bootloaders/optiboot/pin_defs.h diff --git a/hardware/adafruit/avr/bootloaders/optiboot/stk500.h b/bootloaders/optiboot/stk500.h similarity index 100% rename from hardware/adafruit/avr/bootloaders/optiboot/stk500.h rename to bootloaders/optiboot/stk500.h diff --git a/build_linux.sh b/build_linux.sh deleted file mode 100755 index c59d366..0000000 --- a/build_linux.sh +++ /dev/null @@ -1,71 +0,0 @@ -#!/bin/bash -# -# Shell script to take a normal Arduino Linux build and create a new version -# that has Adafruit's board built in to it. -# -# Takes 2 command line parameters, like: -# ./build_linux.sh arduino-1.6.4-linux32.tar.xz adafruit-arduino-1.6.4-linux32.tar.xz -# -# Where the first parameter is the input file and the second parameter is the new -# file to create. The script will decompress the input, add Adafruit's boards, -# and compress the file back into a .tar.xz file with the output name. -# -set -e - -# Location to use as a staging are for decompressing files. -STAGING=/tmp/adafruit_boards -# Expected extension of the input and output files. -EXTENSION=.tar.xz - -# Check that there are two command line parameters. -if [[ "$#" -ne 2 ]]; then - echo "Error! Expected an input and output file as parameters. Usage:" - echo "./build_linux.sh " - exit -1 -fi - -echo "Building Arduino download for Linux using:" -echo "Input: $1" -echo "Output: $2" - -# Check that input has expected extension. -if [[ ! $1 == *$EXTENSION ]]; then - echo "Error! Expected input to be of type $EXTENSION" - exit -1 -fi - -# Delete working area in /tmp/adafruit_boards if it exists. -if [[ -d "$STAGING" ]]; then - echo "Deleting temporary staging area $STAGING..." - rm -rf --preserve-root "$STAGING" -fi - -# Create working area in /tmp/adafruit_boards -mkdir -p "$STAGING" - -# Decompress the input to the staging area. -echo "Decompressing input..." -tar xfC "$1" "$STAGING" - -# Check only one subfolder exists and get is values. -if [[ $(find "$STAGING" -maxdepth 1 -mindepth 1 -type d | wc -l) -ne 1 ]]; then - echo "Error! Expected one subdirectory in staging area!" - exit -1 -fi -SUBDIR=$(find "$STAGING" -maxdepth 1 -mindepth 1 -type d -printf %f) - -# Check a hardware subfolder exists. -if [[ ! -d "$STAGING/$SUBDIR/hardware" ]]; then - echo "Error! Expected hardware subfolder but could not find it!" - exit -1 -fi - -# Copy Adafruit boards into hardware subfolder. -echo "Copying Adafruit boards into staging area..." -cp -rf hardware "$STAGING/$SUBDIR" - -# Create output archive by compressing staging area. -echo "Compressing modified IDE..." -tar cfJC "$2" "$STAGING" "$SUBDIR" - -echo "Done!" diff --git a/build_macosx.sh b/build_macosx.sh deleted file mode 100755 index 571adfc..0000000 --- a/build_macosx.sh +++ /dev/null @@ -1,73 +0,0 @@ -#!/bin/bash -# -# Shell script to take a normal Arduino Mac OSX build and create a new version -# that has Adafruit's board built in to it. -# -# Takes 2 command line parameters, like: -# ./build_windows.sh arduino-1.6.4-macosx.zip adafruit-arduino-1.6.4-macosx.zip -# -# Where the first parameter is the input file and the second parameter is the new -# file to create. The script will decompress the input, add Adafruit's boards, -# and compress the file back into a .zip file with the output name. -# -set -e - -# Location to use as a staging are for decompressing files. -STAGING=/tmp/adafruit_boards -# Expected extension of the input and output files. -EXTENSION=.zip - -# Check that there are two command line parameters. -if [[ "$#" -ne 2 ]]; then - echo "Error! Expected an input and output file as parameters. Usage:" - echo "./build_windows.sh " - exit -1 -fi - -echo "Building Arduino download for Mac OSX using:" -echo "Input: $1" -echo "Output: $2" - -# Check that input has expected extension. -if [[ ! $1 == *$EXTENSION ]]; then - echo "Error! Expected input to be of type $EXTENSION" - exit -1 -fi - -# Delete working area in /tmp/adafruit_boards if it exists. -if [[ -d "$STAGING" ]]; then - echo "Deleting temporary staging area $STAGING..." - rm -rf --preserve-root "$STAGING" -fi - -# Create working area in /tmp/adafruit_boards -mkdir -p "$STAGING" - -# Decompress the input to the staging area. -echo "Decompressing input..." -unzip -qq "$1" -d "$STAGING" - -# Check Arduino.app/Contents/Java folder exists. -if [[ ! -d "$STAGING/Arduino.app/Contents/Java" ]]; then - echo "Error! Expected Arduino.app/Contents/Java in staging area!" - exit -1 -fi - -# Check a hardware subfolder exists. -if [[ ! -d "$STAGING/Arduino.app/Contents/Java/hardware" ]]; then - echo "Error! Expected hardware subfolder but could not find it!" - exit -1 -fi - -# Copy Adafruit boards into hardware subfolder. -echo "Copying Adafruit boards into staging area..." -cp -rf hardware "$STAGING/Arduino.app/Contents/Java" - -# Create output archive by compressing staging area. -echo "Compressing modified IDE..." -cd "$STAGING" -zip -rqq "$2" "Arduino.app" -cd - -mv -f "$STAGING/$2" . - -echo "Done!" diff --git a/build_package.sh b/build_package.sh deleted file mode 100755 index 2473045..0000000 --- a/build_package.sh +++ /dev/null @@ -1,280 +0,0 @@ -#!/usr/bin/env bash -# -# The MIT License (MIT) -# -# Author: Todd Treece -# Copyright (c) 2015 Adafruit Industries -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to deal -# in the Software without restriction, including without limitation the rights -# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -# copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in all -# copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -# SOFTWARE. - -PACKAGE_VERSION="1.3.0" - -# boards are served via github pages -BOARD_DOWNLOAD_URL="https:\/\/adafruit.github.io\/arduino-board-index\/boards" - -# get package script directory -REPO_DIR=$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd ) - -read -r -d '' TEEJSON <<'EOF' -{ - "name":"Adafruit TeeOnArdu", - "architecture":"avr", - "version":"PACKAGEVERSION", - "category":"Adafruit", - "url":"DOWNLOADURL/adafruit-teeonardu-PACKAGEVERSION.tar.bz2", - "archiveFileName":"adafruit-teeonardu-PACKAGEVERSION.tar.bz2", - "checksum":"SHA-256:PACKAGESHA", - "size":"PACKAGESIZE", - "help":{ - "online":"https://forums.adafruit.com" - }, - "boards":[ - { - "name":"TeeOnArdu (Leo on TeensyCore)" - }, - { - "name":"Flora (TeensyCore)" - } - ], - "toolsDependencies": [] -} -EOF - -read -r -d '' SAMDJSON <<'EOF' -{ - "name":"Adafruit SAMD Boards", - "architecture":"samd", - "version":"PACKAGEVERSION", - "category":"Adafruit", - "url":"DOWNLOADURL/adafruit-samd-PACKAGEVERSION.tar.bz2", - "archiveFileName":"adafruit-samd-PACKAGEVERSION.tar.bz2", - "checksum":"SHA-256:PACKAGESHA", - "size":"PACKAGESIZE", - "help":{ - "online":"https://forums.adafruit.com" - }, - "boards":[ - { - "name":"Adafruit Feather M0" - } - ], - "toolsDependencies": [ - { - "packager": "arduino", - "name": "arm-none-eabi-gcc", - "version": "4.8.3-2014q1" - }, - { - "packager": "arduino", - "name": "bossac", - "version": "1.6.1-arduino" - }, - { - "packager": "arduino", - "name": "openocd", - "version": "0.9.0-arduino" - }, - { - "packager": "arduino", - "name": "CMSIS", - "version": "4.0.0-atmel" - } - ] -} -EOF - -read -r -d '' SAMDJSON <<'EOF' -{ - "name":"Adafruit SAMD Boards", - "architecture":"samd", - "version":"PACKAGEVERSION", - "category":"Adafruit", - "url":"DOWNLOADURL/adafruit-samd-PACKAGEVERSION.tar.bz2", - "archiveFileName":"adafruit-samd-PACKAGEVERSION.tar.bz2", - "checksum":"SHA-256:PACKAGESHA", - "size":"PACKAGESIZE", - "help":{ - "online":"https://forums.adafruit.com" - }, - "boards":[ - { - "name":"Adafruit Feather M0" - } - ], - "toolsDependencies": [ - { - "packager": "arduino", - "name": "arm-none-eabi-gcc", - "version": "4.8.3-2014q1" - }, - { - "packager": "arduino", - "name": "bossac", - "version": "1.6.1-arduino" - }, - { - "packager": "arduino", - "name": "openocd", - "version": "0.9.0-arduino" - }, - { - "packager": "arduino", - "name": "CMSIS", - "version": "4.0.0-atmel" - } - ] -} -EOF - -read -r -d '' AVRJSON <<'EOF' -{ - "name":"Adafruit AVR Boards", - "architecture":"avr", - "version":"PACKAGEVERSION", - "category":"Adafruit", - "url":"DOWNLOADURL/adafruit-avr-PACKAGEVERSION.tar.bz2", - "archiveFileName":"adafruit-avr-PACKAGEVERSION.tar.bz2", - "checksum":"SHA-256:PACKAGESHA", - "size":"PACKAGESIZE", - "help":{ - "online":"https://forums.adafruit.com" - }, - "boards":[ - { - "name":"Adafruit Flora" - }, - { - "name":"Adafruit Gemma 8MHz" - }, - { - "name":"Adafruit Bluefruit Micro" - }, - { - "name":"Adafruit Feather 32u4" - }, - { - "name":"Adafruit Metro" - }, - { - "name":"Adafruit Pro Trinket 5V/16MHz (USB)" - }, - { - "name":"Adafruit Pro Trinket 3V/12MHz (USB)" - }, - { - "name":"Adafruit Pro Trinket 5V/16MHz (FTDI)" - }, - { - "name":"Adafruit Pro Trinket 3V/12MHz (FTDI)" - }, - { - "name":"Adafruit Trinket 8MHz" - }, - { - "name":"Adafruit Trinket 16MHz" - } - ], - "toolsDependencies":[] -} -EOF - -# clean build dir -cd $REPO_DIR -rm -r build -mkdir build - -function archive() { - - # args: archive_name source_path sha_return size_return - - local __sha=$3 - local __size=$4 - - echo "building $1.tar.bz2..." - cd $REPO_DIR - cp -a $2 build/$1 - cd build - tar -jcf $1.tar.bz2 $1 - rm -r $1 - - local sha=$(openssl dgst -sha256 $1.tar.bz2 | awk '{print $2}') - local size=$(ls -l | grep $1 | awk '{print $5}') - - eval $__sha="'$sha'" - eval $__size="'$size'" - -} - -read -p "AVR VERSION: " input -PACKAGE_VERSION=$input - -cd $REPO_DIR - -#update platform version -sed -i .bak -e "s/^version=.*/version=$PACKAGE_VERSION/" hardware/adafruit/avr/platform.txt - -# create archives and get sha & size -archive "adafruit-avr-$PACKAGE_VERSION" hardware/adafruit/avr PACKAGESHA PACKAGESIZE - -cd $REPO_DIR - -# fill in board json templatee -echo $AVRJSON | sed -e "s/PACKAGEVERSION/$PACKAGE_VERSION/g" \ - -e "s/DOWNLOADURL/$BOARD_DOWNLOAD_URL/g" \ - -e "s/PACKAGESHA/$PACKAGESHA/g" \ - -e "s/PACKAGESIZE/$PACKAGESIZE/g" > build/avr_package.json - -read -p "SAMD VERSION: " input -PACKAGE_VERSION=$input - -cd $REPO_DIR - -#update platform version -sed -i .bak -e "s/^version=.*/version=$PACKAGE_VERSION/" hardware/adafruit/samd/platform.txt -sed -i .bak -e "s/^name=.*/name=Adafruit SAMD Boards/" hardware/adafruit/samd/platform.txt - -# create archives and get sha & size -archive "adafruit-samd-$PACKAGE_VERSION" hardware/adafruit/samd PACKAGESHA PACKAGESIZE - -cd $REPO_DIR - -# fill in board json templatee -echo $SAMDJSON | sed -e "s/PACKAGEVERSION/$PACKAGE_VERSION/g" \ - -e "s/DOWNLOADURL/$BOARD_DOWNLOAD_URL/g" \ - -e "s/PACKAGESHA/$PACKAGESHA/g" \ - -e "s/PACKAGESIZE/$PACKAGESIZE/g" > build/samd_package.json - -read -p "TeeOnArdu VERSION: " input -PACKAGE_VERSION=$input - -cd $REPO_DIR - -#update platform version -sed -i .bak -e "s/^version=.*/version=$PACKAGE_VERSION/" hardware/teeonardu/avr/platform.txt - -# create archives and get sha & size -archive "adafruit-teeonardu-$PACKAGE_VERSION" hardware/teeonardu/avr PACKAGESHA PACKAGESIZE - -cd $REPO_DIR - -# fill in board json templatee -echo $TEEJSON | sed -e "s/PACKAGEVERSION/$PACKAGE_VERSION/g" \ - -e "s/DOWNLOADURL/$BOARD_DOWNLOAD_URL/g" \ - -e "s/PACKAGESHA/$PACKAGESHA/g" \ - -e "s/PACKAGESIZE/$PACKAGESIZE/g" > build/tee_package.json diff --git a/build_windows.sh b/build_windows.sh deleted file mode 100755 index 6dd4c4a..0000000 --- a/build_windows.sh +++ /dev/null @@ -1,81 +0,0 @@ -#!/bin/bash -# -# Shell script to take a normal Arduino Windows build and create a new version -# that has Adafruit's board built in to it. -# -# Takes 2 command line parameters, like: -# ./build_windows.sh arduino-1.6.4-windows.zip adafruit-arduino-1.6.4-windows.zip -# -# Where the first parameter is the input file and the second parameter is the new -# file to create. The script will decompress the input, add Adafruit's boards, -# and compress the file back into a .zip file with the output name. -# -set -e - -# Location to use as a staging are for decompressing files. -STAGING=/tmp/adafruit_boards -# Expected extension of the input and output files. -EXTENSION=.zip - -# Check that there are two command line parameters. -if [[ "$#" -ne 2 ]]; then - echo "Error! Expected an input and output file as parameters. Usage:" - echo "./build_windows.sh " - exit -1 -fi - -echo "Building Arduino download for Windows using:" -echo "Input: $1" -echo "Output: $2" - -# Check that input has expected extension. -if [[ ! $1 == *$EXTENSION ]]; then - echo "Error! Expected input to be of type $EXTENSION" - exit -1 -fi - -# Delete working area in /tmp/adafruit_boards if it exists. -if [[ -d "$STAGING" ]]; then - echo "Deleting temporary staging area $STAGING..." - rm -rf --preserve-root "$STAGING" -fi - -# Create working area in /tmp/adafruit_boards -mkdir -p "$STAGING" - -# Decompress the input to the staging area. -echo "Decompressing input..." -unzip -qq "$1" -d "$STAGING" - -# Check only one subfolder exists and get is values. -if [[ $(find "$STAGING" -maxdepth 1 -mindepth 1 -type d | wc -l) -ne 1 ]]; then - echo "Error! Expected one subdirectory in staging area!" - exit -1 -fi -SUBDIR=$(find "$STAGING" -maxdepth 1 -mindepth 1 -type d -printf %f) - -# Check a hardware subfolder exists. -if [[ ! -d "$STAGING/$SUBDIR/hardware" ]]; then - echo "Error! Expected hardware subfolder but could not find it!" - exit -1 -fi - -# Check a drivers subfolder exits. -if [[ ! -d "$STAGING/$SUBDIR/drivers" ]]; then - echo "Error! Expected drivers subfolder but could not find it!" - exit -1 -fi - -# Copy Adafruit boards into hardware subfolder. -echo "Copying Adafruit boards and drivers into staging area..." -cp -rf hardware "$STAGING/$SUBDIR" -cp -rf drivers "$STAGING/$SUBDIR" - -# Create output archive by compressing staging area. -echo "Compressing modified IDE..." -cd "$STAGING" -zip -rqq "$2" "$SUBDIR" -cd - -mv -f "$STAGING/$2" . - -echo "Done!" diff --git a/hardware/adafruit/samd b/hardware/adafruit/samd deleted file mode 160000 index 83834c3..0000000 --- a/hardware/adafruit/samd +++ /dev/null @@ -1 +0,0 @@ -Subproject commit 83834c322d5f2e41bfde143894a2d8dfb05c5a0b diff --git a/hardware/teeonardu/avr b/hardware/teeonardu/avr deleted file mode 160000 index 177e057..0000000 --- a/hardware/teeonardu/avr +++ /dev/null @@ -1 +0,0 @@ -Subproject commit 177e057684472728aee12c2a647a76acaefe5c84 diff --git a/hardware/tools/avr/etc/avrdude.conf b/hardware/tools/avr/etc/avrdude.conf deleted file mode 100644 index f8d5eda..0000000 --- a/hardware/tools/avr/etc/avrdude.conf +++ /dev/null @@ -1,14382 +0,0 @@ -# $Id: avrdude.conf.in 1236 2013-09-16 19:40:15Z joerg_wunsch $ -*- text -*- -# -# AVRDUDE Configuration File -# -# This file contains configuration data used by AVRDUDE which describes -# the programming hardware pinouts and also provides part definitions. -# AVRDUDE's "-C" command line option specifies the location of the -# configuration file. The "-c" option names the programmer configuration -# which must match one of the entry's "id" parameter. The "-p" option -# identifies which part AVRDUDE is going to be programming and must match -# one of the parts' "id" parameter. -# -# Possible entry formats are: -# -# programmer -# parent # optional parent -# id = [, [, ] ...] ; # are quoted strings -# desc = ; # quoted string -# type = ; # programmer type, quoted string -# # supported programmer types can be listed by "-c ?type" -# connection_type = parallel | serial | usb -# baudrate = ; # baudrate for avr910-programmer -# vcc = [, ... ] ; # pin number(s) -# buff = [, ... ] ; # pin number(s) -# reset = ; # pin number -# sck = ; # pin number -# mosi = ; # pin number -# miso = ; # pin number -# errled = ; # pin number -# rdyled = ; # pin number -# pgmled = ; # pin number -# vfyled = ; # pin number -# usbvid = ; # USB VID (Vendor ID) -# usbpid = ; # USB PID (Product ID) -# usbdev = ; # USB interface or other device info -# usbvendor = ; # USB Vendor Name -# usbproduct = ; # USB Product Name -# usbsn = ; # USB Serial Number -# -# To invert a bit, use = ~ , the spaces are important. -# For a pin list all pins must be inverted. -# A single pin can be specified as usual = ~ , for lists -# specify it as follows = ~ ( [, ... ] ) . -# ; -# -# part -# id = ; # quoted string -# desc = ; # quoted string -# has_jtag = ; # part has JTAG i/f -# has_debugwire = ; # part has debugWire i/f -# has_pdi = ; # part has PDI i/f -# has_tpi = ; # part has TPI i/f -# devicecode = ; # deprecated, use stk500_devcode -# stk500_devcode = ; # numeric -# avr910_devcode = ; # numeric -# signature = ; # signature bytes -# chip_erase_delay = ; # micro-seconds -# reset = dedicated | io; -# retry_pulse = reset | sck; -# pgm_enable = ; -# chip_erase = ; -# chip_erase_delay = ; # chip erase delay (us) -# # STK500 parameters (parallel programming IO lines) -# pagel = ; # pin name in hex, i.e., 0xD7 -# bs2 = ; # pin name in hex, i.e., 0xA0 -# serial = ; # can use serial downloading -# parallel = ; # can use par. programming -# # STK500v2 parameters, to be taken from Atmel's XML files -# timeout = ; -# stabdelay = ; -# cmdexedelay = ; -# synchloops = ; -# bytedelay = ; -# pollvalue = ; -# pollindex = ; -# predelay = ; -# postdelay = ; -# pollmethod = ; -# mode = ; -# delay = ; -# blocksize = ; -# readsize = ; -# hvspcmdexedelay = ; -# # STK500v2 HV programming parameters, from XML -# pp_controlstack = , , ...; # PP only -# hvsp_controlstack = , , ...; # HVSP only -# hventerstabdelay = ; -# progmodedelay = ; # PP only -# latchcycles = ; -# togglevtg = ; -# poweroffdelay = ; -# resetdelayms = ; -# resetdelayus = ; -# hvleavestabdelay = ; -# resetdelay = ; -# synchcycles = ; # HVSP only -# chiperasepulsewidth = ; # PP only -# chiperasepolltimeout = ; -# chiperasetime = ; # HVSP only -# programfusepulsewidth = ; # PP only -# programfusepolltimeout = ; -# programlockpulsewidth = ; # PP only -# programlockpolltimeout = ; -# # JTAG ICE mkII parameters, also from XML files -# allowfullpagebitstream = ; -# enablepageprogramming = ; -# idr = ; # IO addr of IDR (OCD) reg. -# rampz = ; # IO addr of RAMPZ reg. -# spmcr = ; # mem addr of SPMC[S]R reg. -# eecr = ; # mem addr of EECR reg. -# # (only when != 0x3c) -# is_at90s1200 = ; # AT90S1200 part -# is_avr32 = ; # AVR32 part -# -# memory -# paged = ; # yes / no -# size = ; # bytes -# page_size = ; # bytes -# num_pages = ; # numeric -# min_write_delay = ; # micro-seconds -# max_write_delay = ; # micro-seconds -# readback_p1 = ; # byte value -# readback_p2 = ; # byte value -# pwroff_after_write = ; # yes / no -# read = ; -# write = ; -# read_lo = ; -# read_hi = ; -# write_lo = ; -# write_hi = ; -# loadpage_lo = ; -# loadpage_hi = ; -# writepage = ; -# ; -# ; -# -# If any of the above parameters are not specified, the default value -# of 0 is used for numerics or the empty string ("") for string -# values. If a required parameter is left empty, AVRDUDE will -# complain. -# -# Parts can also inherit parameters from previously defined parts -# using the following syntax. In this case specified integer and -# string values override parameter values from the parent part. New -# memory definitions are added to the definitions inherited from the -# parent. -# -# part parent # quoted string -# id = ; # quoted string -# -# ; -# -# NOTES: -# * 'devicecode' is the device code used by the STK500 (see codes -# listed below) -# * Not all memory types will implement all instructions. -# * AVR Fuse bits and Lock bits are implemented as a type of memory. -# * Example memory types are: -# "flash", "eeprom", "fuse", "lfuse" (low fuse), "hfuse" (high -# fuse), "signature", "calibration", "lock" -# * The memory type specified on the avrdude command line must match -# one of the memory types defined for the specified chip. -# * The pwroff_after_write flag causes avrdude to attempt to -# power the device off and back on after an unsuccessful write to -# the affected memory area if VCC programmer pins are defined. If -# VCC pins are not defined for the programmer, a message -# indicating that the device needs a power-cycle is printed out. -# This flag was added to work around a problem with the -# at90s4433/2333's; see the at90s4433 errata at: -# -# http://www.atmel.com/dyn/resources/prod_documents/doc1280.pdf -# -# INSTRUCTION FORMATS -# -# Instruction formats are specified as a comma seperated list of -# string values containing information (bit specifiers) about each -# of the 32 bits of the instruction. Bit specifiers may be one of -# the following formats: -# -# '1' = the bit is always set on input as well as output -# -# '0' = the bit is always clear on input as well as output -# -# 'x' = the bit is ignored on input and output -# -# 'a' = the bit is an address bit, the bit-number matches this bit -# specifier's position within the current instruction byte -# -# 'aN' = the bit is the Nth address bit, bit-number = N, i.e., a12 -# is address bit 12 on input, a0 is address bit 0. -# -# 'i' = the bit is an input data bit -# -# 'o' = the bit is an output data bit -# -# Each instruction must be composed of 32 bit specifiers. The -# instruction specification closely follows the instruction data -# provided in Atmel's data sheets for their parts. -# -# See below for some examples. -# -# -# The following are STK500 part device codes to use for the -# "devicecode" field of the part. These came from Atmel's software -# section avr061.zip which accompanies the application note -# AVR061 available from: -# -# http://www.atmel.com/dyn/resources/prod_documents/doc2525.pdf -# - -#define ATTINY10 0x10 /* the _old_ one that never existed! */ -#define ATTINY11 0x11 -#define ATTINY12 0x12 -#define ATTINY15 0x13 -#define ATTINY13 0x14 - -#define ATTINY22 0x20 -#define ATTINY26 0x21 -#define ATTINY28 0x22 -#define ATTINY2313 0x23 - -#define AT90S1200 0x33 - -#define AT90S2313 0x40 -#define AT90S2323 0x41 -#define AT90S2333 0x42 -#define AT90S2343 0x43 - -#define AT90S4414 0x50 -#define AT90S4433 0x51 -#define AT90S4434 0x52 -#define ATMEGA48 0x59 - -#define AT90S8515 0x60 -#define AT90S8535 0x61 -#define AT90C8534 0x62 -#define ATMEGA8515 0x63 -#define ATMEGA8535 0x64 - -#define ATMEGA8 0x70 -#define ATMEGA88 0x73 -#define ATMEGA168 0x86 - -#define ATMEGA161 0x80 -#define ATMEGA163 0x81 -#define ATMEGA16 0x82 -#define ATMEGA162 0x83 -#define ATMEGA169 0x84 - -#define ATMEGA323 0x90 -#define ATMEGA32 0x91 - -#define ATMEGA64 0xA0 - -#define ATMEGA103 0xB1 -#define ATMEGA128 0xB2 -#define AT90CAN128 0xB3 -#define AT90CAN64 0xB3 -#define AT90CAN32 0xB3 - -#define AT86RF401 0xD0 - -#define AT89START 0xE0 -#define AT89S51 0xE0 -#define AT89S52 0xE1 - -# The following table lists the devices in the original AVR910 -# appnote: -# |Device |Signature | Code | -# +-------+----------+------+ -# |tiny12 | 1E 90 05 | 0x55 | -# |tiny15 | 1E 90 06 | 0x56 | -# | | | | -# | S1200 | 1E 90 01 | 0x13 | -# | | | | -# | S2313 | 1E 91 01 | 0x20 | -# | S2323 | 1E 91 02 | 0x48 | -# | S2333 | 1E 91 05 | 0x34 | -# | S2343 | 1E 91 03 | 0x4C | -# | | | | -# | S4414 | 1E 92 01 | 0x28 | -# | S4433 | 1E 92 03 | 0x30 | -# | S4434 | 1E 92 02 | 0x6C | -# | | | | -# | S8515 | 1E 93 01 | 0x38 | -# | S8535 | 1E 93 03 | 0x68 | -# | | | | -# |mega32 | 1E 95 01 | 0x72 | -# |mega83 | 1E 93 05 | 0x65 | -# |mega103| 1E 97 01 | 0x41 | -# |mega161| 1E 94 01 | 0x60 | -# |mega163| 1E 94 02 | 0x64 | - -# Appnote AVR109 also has a table of AVR910 device codes, which -# lists: -# dev avr910 signature -# ATmega8 0x77 0x1E 0x93 0x07 -# ATmega8515 0x3B 0x1E 0x93 0x06 -# ATmega8535 0x6A 0x1E 0x93 0x08 -# ATmega16 0x75 0x1E 0x94 0x03 -# ATmega162 0x63 0x1E 0x94 0x04 -# ATmega163 0x66 0x1E 0x94 0x02 -# ATmega169 0x79 0x1E 0x94 0x05 -# ATmega32 0x7F 0x1E 0x95 0x02 -# ATmega323 0x73 0x1E 0x95 0x01 -# ATmega64 0x46 0x1E 0x96 0x02 -# ATmega128 0x44 0x1E 0x97 0x02 -# -# These codes refer to "BOOT" device codes which are apparently -# different than standard device codes, for whatever reasons -# (often one above the standard code). - -# There are several extended versions of AVR910 implementations around -# in the Internet. These add the following codes (only devices that -# actually exist are listed): - -# ATmega8515 0x3A -# ATmega128 0x43 -# ATmega64 0x45 -# ATtiny26 0x5E -# ATmega8535 0x69 -# ATmega32 0x72 -# ATmega16 0x74 -# ATmega8 0x76 -# ATmega169 0x78 - -# -# Overall avrdude defaults; suitable for ~/.avrduderc -# -default_parallel = "/dev/parport0"; -default_serial = "/dev/ttyS0"; -# default_bitclock = 2.5; - -# Turn off safemode by default -#default_safemode = no; - - -# -# PROGRAMMER DEFINITIONS -# - -# http://wiring.org.co/ -# Basically STK500v2 protocol, with some glue to trigger the -# bootloader. -programmer - id = "wiring"; - desc = "Wiring"; - type = "wiring"; - connection_type = serial; -; - -programmer - id = "arduino"; - desc = "Arduino"; - type = "arduino"; - connection_type = serial; -; -# this will interface with the chips on these programmers: -# -# http://real.kiev.ua/old/avreal/en/adapters -# http://www.amontec.com/jtagkey.shtml, jtagkey-tiny.shtml -# http://www.olimex.com/dev/arm-usb-ocd.html, arm-usb-tiny.html -# http://www.ethernut.de/en/hardware/turtelizer/index.html -# http://elk.informatik.fh-augsburg.de/hhweb/doc/openocd/usbjtag/usbjtag.html -# http://dangerousprototypes.com/docs/FT2232_breakout_board -# http://www.ftdichip.com/Products/Modules/DLPModules.htm,DLP-2232*,DLP-USB1232H -# http://flashrom.org/FT2232SPI_Programmer -# -# The drivers will look for a specific device and use the first one found. -# If you have mulitple devices, then look for unique information (like SN) -# And fill that in here. -# -# Note that the pin numbers for the main ISP signals (reset, sck, -# mosi, miso) are fixed and cannot be changed, since they must match -# the way the Multi-Protocol Synchronous Serial Engine (MPSSE) of -# these FTDI ICs has been designed. - -programmer - id = "avrftdi"; - desc = "FT2232D based generic programmer"; - type = "avrftdi"; - connection_type = usb; - usbvid = 0x0403; - usbpid = 0x6010; - usbvendor = ""; - usbproduct = ""; - usbdev = "A"; - usbsn = ""; -#ISP-signals - lower ADBUS-Nibble (default) - reset = 3; - sck = 0; - mosi = 1; - miso = 2; -#LED SIGNALs - higher ADBUS-Nibble -# errled = 4; -# rdyled = 5; -# pgmled = 6; -# vfyled = 7; -#Buffer Signal - ACBUS - Nibble -# buff = 8; -; -# This is an implementation of the above with a buffer IC (74AC244) and -# 4 LEDs directly attached, all active low. -programmer - id = "2232HIO"; - desc = "FT2232H based generic programmer"; - type = "avrftdi"; - connection_type = usb; - usbvid = 0x0403; -# Note: This PID is reserved for generic H devices and -# should be programmed into the EEPROM -# usbpid = 0x8A48; - usbpid = 0x6010; - usbdev = "A"; - usbvendor = ""; - usbproduct = ""; - usbsn = ""; -#ISP-signals - reset = 3; - sck = 0; - mosi = 1; - miso = 2; - buff = ~4; -#LED SIGNALs - errled = ~ 11; - rdyled = ~ 14; - pgmled = ~ 13; - vfyled = ~ 12; -; - -#The FT4232H can be treated as FT2232H, but it has a different USB -#device ID of 0x6011. -programmer parent "avrftdi" - id = "4232h"; - desc = "FT4232H based generic programmer"; - usbpid = 0x6011; -; - -programmer - id = "jtagkey"; - desc = "Amontec JTAGKey, JTAGKey-Tiny and JTAGKey2"; - type = "avrftdi"; - connection_type = usb; - usbvid = 0x0403; -# Note: This PID is used in all JTAGKey variants - usbpid = 0xCFF8; - usbdev = "A"; - usbvendor = ""; - usbproduct = ""; - usbsn = ""; -#ISP-signals => 20 - Pin connector on JTAGKey - reset = 3; # TMS 7 violet - sck = 0; # TCK 9 white - mosi = 1; # TDI 5 green - miso = 2; # TDO 13 orange - buff = ~4; -# VTG VREF 1 brown with red tip -# GND GND 20 black -# The colors are on the 20 pin breakout cable -# from Amontec -; - -# On the adapter you can read "O-Link". On the PCB is printed "OpenJTAG v3.1" -# You can find it as "OpenJTAG ARM JTAG USB" in the internet. -# (But there are also several projects called Open JTAG, eg. -# http://www.openjtag.org, which are completely different.) -# http://www.100ask.net/shop/english.html (website seems to be outdated) -# http://item.taobao.com/item.htm?id=1559277013 -# http://www.micro4you.com/store/openjtag-arm-jtag-usb.html (schematics!) -# some other sources which call it O-Link -# http://www.andahammer.com/olink/ -# http://www.developmentboard.net/31-o-link-debugger.html -# http://armwerks.com/catalog/o-link-debugger-copy/ -# or just have a look at ebay ... -# It is basically the same entry as jtagkey with different usb ids. -programmer parent "jtagkey" - id = "o-link"; - desc = "O-Link, OpenJTAG from www.100ask.net"; - usbvid = 0x1457; - usbpid = 0x5118; - usbvendor = "www.100ask.net"; - usbproduct = "USB<=>JTAG&RS232"; -; - -# http://wiki.openmoko.org/wiki/Debug_Board_v3 -programmer - id = "openmoko"; - desc = "Openmoko debug board (v3)"; - type = "avrftdi"; - usbvid = 0x1457; - usbpid = 0x5118; - usbdev = "A"; - usbvendor = ""; - usbproduct = ""; - usbsn = ""; - reset = 3; # TMS 7 - sck = 0; # TCK 9 - mosi = 1; # TDI 5 - miso = 2; # TDO 13 -; - -# Only Rev. A boards. -# Schematic and user manual: http://www.cs.put.poznan.pl/wswitala/download/pdf/811EVBK.pdf -programmer - id = "lm3s811"; - desc = "Luminary Micro LM3S811 Eval Board (Rev. A)"; - type = "avrftdi"; - connection_type = usb; - usbvid = 0x0403; - usbpid = 0xbcd9; - usbvendor = "LMI"; - usbproduct = "LM3S811 Evaluation Board"; - usbdev = "A"; - usbsn = ""; -#ISP-signals - lower ACBUS-Nibble (default) - reset = 3; - sck = 0; - mosi = 1; - miso = 2; -# Enable correct buffers - buff = 7; -; - -programmer - id = "avrisp"; - desc = "Atmel AVR ISP"; - type = "stk500"; - connection_type = serial; -; - -programmer - id = "avrispv2"; - desc = "Atmel AVR ISP V2"; - type = "stk500v2"; - connection_type = serial; -; - -programmer - id = "avrispmkII"; - desc = "Atmel AVR ISP mkII"; - type = "stk500v2"; - connection_type = usb; -; - -programmer parent "avrispmkII" - id = "avrisp2"; -; - -programmer - id = "buspirate"; - desc = "The Bus Pirate"; - type = "buspirate"; - connection_type = serial; -; - -programmer - id = "buspirate_bb"; - desc = "The Bus Pirate (bitbang interface, supports TPI)"; - type = "buspirate_bb"; - connection_type = serial; - # pins are bits in bitbang byte (numbers are 87654321) - # 1|POWER|PULLUP|AUX|MOSI|CLK|MISO|CS - reset = 1; - sck = 3; - mosi = 4; - miso = 2; - #vcc = 7; This is internally set independent of this setting. -; - -# This is supposed to be the "default" STK500 entry. -# Attempts to select the correct firmware version -# by probing for it. Better use one of the entries -# below instead. -programmer - id = "stk500"; - desc = "Atmel STK500"; - type = "stk500generic"; - connection_type = serial; -; - -programmer - id = "stk500v1"; - desc = "Atmel STK500 Version 1.x firmware"; - type = "stk500"; - connection_type = serial; -; - -programmer - id = "mib510"; - desc = "Crossbow MIB510 programming board"; - type = "stk500"; - connection_type = serial; -; - -programmer - id = "stk500v2"; - desc = "Atmel STK500 Version 2.x firmware"; - type = "stk500v2"; - connection_type = serial; -; - -programmer - id = "stk500pp"; - desc = "Atmel STK500 V2 in parallel programming mode"; - type = "stk500pp"; - connection_type = serial; -; - -programmer - id = "stk500hvsp"; - desc = "Atmel STK500 V2 in high-voltage serial programming mode"; - type = "stk500hvsp"; - connection_type = serial; -; - -programmer - id = "stk600"; - desc = "Atmel STK600"; - type = "stk600"; - connection_type = usb; -; - -programmer - id = "stk600pp"; - desc = "Atmel STK600 in parallel programming mode"; - type = "stk600pp"; - connection_type = usb; -; - -programmer - id = "stk600hvsp"; - desc = "Atmel STK600 in high-voltage serial programming mode"; - type = "stk600hvsp"; - connection_type = usb; -; - -programmer - id = "avr910"; - desc = "Atmel Low Cost Serial Programmer"; - type = "avr910"; - connection_type = serial; -; - -programmer - id = "ft245r"; - desc = "FT245R Synchronous BitBang"; - type = "ftdi_syncbb"; - connection_type = usb; - miso = 1; # D1 - sck = 0; # D0 - mosi = 2; # D2 - reset = 4; # D4 -; - -programmer - id = "ft232r"; - desc = "FT232R Synchronous BitBang"; - type = "ftdi_syncbb"; - connection_type = usb; - miso = 1; # RxD - sck = 0; # RTS - mosi = 2; # TxD - reset = 4; # DTR -; - -# see http://www.bitwizard.nl/wiki/index.php/FTDI_ATmega -programmer - id = "bwmega"; - desc = "BitWizard ftdi_atmega builtin programmer"; - type = "ftdi_syncbb"; - connection_type = usb; - miso = 5; # DSR - sck = 6; # DCD - mosi = 3; # CTS - reset = 7; # RI -; - -# see http://www.geocities.jp/arduino_diecimila/bootloader/index_en.html -# Note: pins are numbered from 1! -programmer - id = "arduino-ft232r"; - desc = "Arduino: FT232R connected to ISP"; - type = "ftdi_syncbb"; - connection_type = usb; - miso = 3; # CTS X3(1) - sck = 5; # DSR X3(2) - mosi = 6; # DCD X3(3) - reset = 7; # RI X3(4) -; - -# website mentioned above uses this id -programmer parent "arduino-ft232r" - id = "diecimila"; - desc = "alias for arduino-ft232r"; -; - -programmer - id = "usbasp"; - desc = "USBasp, http://www.fischl.de/usbasp/"; - type = "usbasp"; - connection_type = usb; - usbvid = 0x16C0; # VOTI - usbpid = 0x05DC; # Obdev's free shared PID - usbvendor = "www.fischl.de"; - usbproduct = "USBasp"; - - # following variants are autodetected for id "usbasp" - - # original usbasp from fischl.de - # see above "usbasp" - - # old usbasp from fischl.de - #usbvid = 0x03EB; # ATMEL - #usbpid = 0xC7B4; # (unoffical) USBasp - #usbvendor = "www.fischl.de"; - #usbproduct = "USBasp"; - - # NIBObee (only if -P nibobee is given on command line) - # see below "nibobee" -; - -programmer - id = "nibobee"; - desc = "NIBObee"; - type = "usbasp"; - connection_type = usb; - usbvid = 0x16C0; # VOTI - usbpid = 0x092F; # NIBObee PID - usbvendor = "www.nicai-systems.com"; - usbproduct = "NIBObee"; -; - -programmer - id = "usbasp-clone"; - desc = "Any usbasp clone with correct VID/PID"; - type = "usbasp"; - connection_type = usb; - usbvid = 0x16C0; # VOTI - usbpid = 0x05DC; # Obdev's free shared PID - #usbvendor = ""; - #usbproduct = ""; -; - -programmer - id = "usbtiny"; - desc = "USBtiny simple USB programmer, http://www.ladyada.net/make/usbtinyisp/"; - type = "usbtiny"; - connection_type = usb; - usbvid = 0x1781; - usbpid = 0x0c9f; -; - -programmer - id = "arduinoisp"; - desc = " "; - type = "usbtiny"; - connection_type = usb; - usbvid = 0x2341; - usbpid = 0x0049; -; - -programmer - id = "butterfly"; - desc = "Atmel Butterfly Development Board"; - type = "butterfly"; - connection_type = serial; -; - -programmer - id = "avr109"; - desc = "Atmel AppNote AVR109 Boot Loader"; - type = "butterfly"; - connection_type = serial; -; - -programmer - id = "avr911"; - desc = "Atmel AppNote AVR911 AVROSP"; - type = "butterfly"; - connection_type = serial; -; - -# suggested in http://forum.mikrokopter.de/topic-post48317.html -programmer - id = "mkbutterfly"; - desc = "Mikrokopter.de Butterfly"; - type = "butterfly_mk"; - connection_type = serial; -; - -programmer parent "mkbutterfly" - id = "butterfly_mk"; -; - -programmer - id = "jtagmkI"; - desc = "Atmel JTAG ICE (mkI)"; - baudrate = 115200; # default is 115200 - type = "jtagmki"; - connection_type = serial; -; - -# easier to type -programmer parent "jtagmkI" - id = "jtag1"; -; - -# easier to type -programmer parent "jtag1" - id = "jtag1slow"; - baudrate = 19200; -; - -# The JTAG ICE mkII has both, serial and USB connectivity. As it is -# mostly used through USB these days (AVR Studio 5 only supporting it -# that way), we make connection_type = usb the default. Users are -# still free to use a serial port with the -P option. - -programmer - id = "jtagmkII"; - desc = "Atmel JTAG ICE mkII"; - baudrate = 19200; # default is 19200 - type = "jtagmkii"; - connection_type = usb; -; - -# easier to type -programmer parent "jtagmkII" - id = "jtag2slow"; -; - -# JTAG ICE mkII @ 115200 Bd -programmer parent "jtag2slow" - id = "jtag2fast"; - baudrate = 115200; -; - -# make the fast one the default, people will love that -programmer parent "jtag2fast" - id = "jtag2"; -; - -# JTAG ICE mkII in ISP mode -programmer - id = "jtag2isp"; - desc = "Atmel JTAG ICE mkII in ISP mode"; - baudrate = 115200; - type = "jtagmkii_isp"; - connection_type = usb; -; - -# JTAG ICE mkII in debugWire mode -programmer - id = "jtag2dw"; - desc = "Atmel JTAG ICE mkII in debugWire mode"; - baudrate = 115200; - type = "jtagmkii_dw"; - connection_type = usb; -; - -# JTAG ICE mkII in AVR32 mode -programmer - id = "jtagmkII_avr32"; - desc = "Atmel JTAG ICE mkII im AVR32 mode"; - baudrate = 115200; - type = "jtagmkii_avr32"; - connection_type = usb; -; - -# JTAG ICE mkII in AVR32 mode -programmer - id = "jtag2avr32"; - desc = "Atmel JTAG ICE mkII im AVR32 mode"; - baudrate = 115200; - type = "jtagmkii_avr32"; - connection_type = usb; -; - -# JTAG ICE mkII in PDI mode -programmer - id = "jtag2pdi"; - desc = "Atmel JTAG ICE mkII PDI mode"; - baudrate = 115200; - type = "jtagmkii_pdi"; - connection_type = usb; -; - -# AVR Dragon in JTAG mode -programmer - id = "dragon_jtag"; - desc = "Atmel AVR Dragon in JTAG mode"; - baudrate = 115200; - type = "dragon_jtag"; - connection_type = usb; -; - -# AVR Dragon in ISP mode -programmer - id = "dragon_isp"; - desc = "Atmel AVR Dragon in ISP mode"; - baudrate = 115200; - type = "dragon_isp"; - connection_type = usb; -; - -# AVR Dragon in PP mode -programmer - id = "dragon_pp"; - desc = "Atmel AVR Dragon in PP mode"; - baudrate = 115200; - type = "dragon_pp"; - connection_type = usb; -; - -# AVR Dragon in HVSP mode -programmer - id = "dragon_hvsp"; - desc = "Atmel AVR Dragon in HVSP mode"; - baudrate = 115200; - type = "dragon_hvsp"; - connection_type = usb; -; - -# AVR Dragon in debugWire mode -programmer - id = "dragon_dw"; - desc = "Atmel AVR Dragon in debugWire mode"; - baudrate = 115200; - type = "dragon_dw"; - connection_type = usb; -; - -# AVR Dragon in PDI mode -programmer - id = "dragon_pdi"; - desc = "Atmel AVR Dragon in PDI mode"; - baudrate = 115200; - type = "dragon_pdi"; - connection_type = usb; -; - -programmer - id = "jtag3"; - desc = "Atmel AVR JTAGICE3 in JTAG mode"; - type = "jtagice3"; - connection_type = usb; -; - -programmer - id = "jtag3pdi"; - desc = "Atmel AVR JTAGICE3 in PDI mode"; - type = "jtagice3_pdi"; - connection_type = usb; -; - -programmer - id = "jtag3dw"; - desc = "Atmel AVR JTAGICE3 in debugWIRE mode"; - type = "jtagice3_dw"; - connection_type = usb; -; - -programmer - id = "jtag3isp"; - desc = "Atmel AVR JTAGICE3 in ISP mode"; - type = "jtagice3_isp"; - connection_type = usb; -; - - -programmer - id = "pavr"; - desc = "Jason Kyle's pAVR Serial Programmer"; - type = "avr910"; - connection_type = serial; -; - -programmer - id = "pickit2"; - desc = "MicroChip's PICkit2 Programmer"; - type = "pickit2"; - connection_type = usb; -; - -# Parallel port programmers. - -programmer - id = "bsd"; - desc = "Brian Dean's Programmer, http://www.bsdhome.com/avrdude/"; - type = "par"; - connection_type = parallel; - vcc = 2, 3, 4, 5; - reset = 7; - sck = 8; - mosi = 9; - miso = 10; -; - -programmer - id = "stk200"; - desc = "STK200"; - type = "par"; - connection_type = parallel; - buff = 4, 5; - sck = 6; - mosi = 7; - reset = 9; - miso = 10; -; - -# The programming dongle used by the popular Ponyprog -# utility. It is almost similar to the STK200 one, -# except that there is a LED indicating that the -# programming is currently in progress. - -programmer parent "stk200" - id = "pony-stk200"; - desc = "Pony Prog STK200"; - pgmled = 8; -; - -programmer - id = "dt006"; - desc = "Dontronics DT006"; - type = "par"; - connection_type = parallel; - reset = 4; - sck = 5; - mosi = 2; - miso = 11; -; - -programmer parent "dt006" - id = "bascom"; - desc = "Bascom SAMPLE programming cable"; -; - -programmer - id = "alf"; - desc = "Nightshade ALF-PgmAVR, http://nightshade.homeip.net/"; - type = "par"; - connection_type = parallel; - vcc = 2, 3, 4, 5; - buff = 6; - reset = 7; - sck = 8; - mosi = 9; - miso = 10; - errled = 1; - rdyled = 14; - pgmled = 16; - vfyled = 17; -; - -programmer - id = "sp12"; - desc = "Steve Bolt's Programmer"; - type = "par"; - connection_type = parallel; - vcc = 4,5,6,7,8; - reset = 3; - sck = 2; - mosi = 9; - miso = 11; -; - -programmer - id = "picoweb"; - desc = "Picoweb Programming Cable, http://www.picoweb.net/"; - type = "par"; - connection_type = parallel; - reset = 2; - sck = 3; - mosi = 4; - miso = 13; -; - -programmer - id = "abcmini"; - desc = "ABCmini Board, aka Dick Smith HOTCHIP"; - type = "par"; - connection_type = parallel; - reset = 4; - sck = 3; - mosi = 2; - miso = 10; -; - -programmer - id = "futurlec"; - desc = "Futurlec.com programming cable."; - type = "par"; - connection_type = parallel; - reset = 3; - sck = 2; - mosi = 1; - miso = 10; -; - - -# From the contributor of the "xil" jtag cable: -# The "vcc" definition isn't really vcc (the cable gets its power from -# the programming circuit) but is necessary to switch one of the -# buffer lines (trying to add it to the "buff" lines doesn't work in -# avrdude versions before 5.5j). -# With this, TMS connects to RESET, TDI to MOSI, TDO to MISO and TCK -# to SCK (plus vcc/gnd of course) -programmer - id = "xil"; - desc = "Xilinx JTAG cable"; - type = "par"; - connection_type = parallel; - mosi = 2; - sck = 3; - reset = 4; - buff = 5; - miso = 13; - vcc = 6; -; - - -programmer - id = "dapa"; - desc = "Direct AVR Parallel Access cable"; - type = "par"; - connection_type = parallel; - vcc = 3; - reset = 16; - sck = 1; - mosi = 2; - miso = 11; -; - -programmer - id = "atisp"; - desc = "AT-ISP V1.1 programming cable for AVR-SDK1 from micro-research.co.th"; - type = "par"; - connection_type = parallel; - reset = ~6; - sck = ~8; - mosi = ~7; - miso = ~10; -; - -programmer - id = "ere-isp-avr"; - desc = "ERE ISP-AVR "; - type = "par"; - connection_type = parallel; - reset = ~4; - sck = 3; - mosi = 2; - miso = 10; -; - -programmer - id = "blaster"; - desc = "Altera ByteBlaster"; - type = "par"; - connection_type = parallel; - sck = 2; - miso = 11; - reset = 3; - mosi = 8; - buff = 14; -; - -# It is almost same as pony-stk200, except vcc on pin 5 to auto -# disconnect port (download on http://electropol.free.fr/spip/spip.php?article27) -programmer parent "pony-stk200" - id = "frank-stk200"; - desc = "Frank STK200"; - buff = ; # delete buff pin assignment - vcc = 5; -; - -# The AT98ISP Cable is a simple parallel dongle for AT89 family. -# http://www.atmel.com/dyn/products/tools_card.asp?tool_id=2877 -programmer - id = "89isp"; - desc = "Atmel at89isp cable"; - type = "par"; - connection_type = parallel; - reset = 17; - sck = 1; - mosi = 2; - miso = 10; -; - - -#This programmer bitbangs GPIO lines using the Linux sysfs GPIO interface -# -#To enable it set the configuration below to match the GPIO lines connected to the -#relevant ISP header pins and uncomment the entry definition. In case you don't -#have the required permissions to edit this system wide config file put the -#entry in a separate .conf file and use it with -C+.conf -#on the command line. -# -#To check if your avrdude build has support for the linuxgpio programmer compiled in, -#use -c?type on the command line and look for linuxgpio in the list. If it's not available -#you need pass the --enable-linuxgpio=yes option to configure and recompile avrdude. -# -#programmer -# id = "linuxgpio"; -# desc = "Use the Linux sysfs interface to bitbang GPIO lines"; -# type = "linuxgpio"; -# reset = ?; -# sck = ?; -# mosi = ?; -# miso = ?; -#; - -#This programmer bitbangs GPIO lines using the Linux sysfs GPIO interface and direct -#GPIO memory registers read/write. -# -#To enable it set the configuration below to match the GPIO lines connected to the -#relevant ISP header pins and uncomment the entry definition. In case you don't -#have the required permissions to edit this system wide config file put the -#entry in a separate .conf file and use it with -C+.conf -#on the command line. -# -#To check if your avrdude build has support for the arduinotre programmer compiled in, -#use -c?type on the command line and look for arduinotre in the list. If it's not available -#you need pass the --enable-arduinotre=yes option to configure and recompile avrdude. -# -#programmer -# id = "arduinotre"; -# desc = "Arduino TRE bitbanging using GPIO registers"; -# type = "arduinotre"; -# reset = ~65; -# sck = 49; -# mosi = 48; -# miso = 61; -#; - -# some ultra cheap programmers use bitbanging on the -# serialport. -# -# PC - DB9 - Pins for RS232: -# -# GND 5 -- |O -# | O| <- 9 RI -# DTR 4 <- |O | -# | O| <- 8 CTS -# TXD 3 <- |O | -# | O| -> 7 RTS -# RXD 2 -> |O | -# | O| <- 6 DSR -# DCD 1 -> |O -# -# Using RXD is currently not supported. -# Using RI is not supported under Win32 but is supported under Posix. - -# serial ponyprog design (dasa2 in uisp) -# reset=!txd sck=rts mosi=dtr miso=cts - -programmer - id = "ponyser"; - desc = "design ponyprog serial, reset=!txd sck=rts mosi=dtr miso=cts"; - type = "serbb"; - connection_type = serial; - reset = ~3; - sck = 7; - mosi = 4; - miso = 8; -; - -# Same as above, different name -# reset=!txd sck=rts mosi=dtr miso=cts - -programmer parent "ponyser" - id = "siprog"; - desc = "Lancos SI-Prog "; -; - -# unknown (dasa in uisp) -# reset=rts sck=dtr mosi=txd miso=cts - -programmer - id = "dasa"; - desc = "serial port banging, reset=rts sck=dtr mosi=txd miso=cts"; - type = "serbb"; - connection_type = serial; - reset = 7; - sck = 4; - mosi = 3; - miso = 8; -; - -# unknown (dasa3 in uisp) -# reset=!dtr sck=rts mosi=txd miso=cts - -programmer - id = "dasa3"; - desc = "serial port banging, reset=!dtr sck=rts mosi=txd miso=cts"; - type = "serbb"; - connection_type = serial; - reset = ~4; - sck = 7; - mosi = 3; - miso = 8; -; - -# C2N232i (jumper configuration "auto") -# reset=dtr sck=!rts mosi=!txd miso=!cts - -programmer - id = "c2n232i"; - desc = "serial port banging, reset=dtr sck=!rts mosi=!txd miso=!cts"; - type = "serbb"; - connection_type = serial; - reset = 4; - sck = ~7; - mosi = ~3; - miso = ~8; -; - -# -# PART DEFINITIONS -# - -#------------------------------------------------------------ -# ATtiny11 -#------------------------------------------------------------ - -# This is an HVSP-only device. - -part - id = "t11"; - desc = "ATtiny11"; - stk500_devcode = 0x11; - signature = 0x1e 0x90 0x04; - chip_erase_delay = 20000; - - timeout = 200; - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, - 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, - 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 0; - resetdelayus = 50; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - memory "eeprom" - size = 64; - blocksize = 64; - readsize = 256; - delay = 5; - ; - - memory "flash" - size = 1024; - blocksize = 128; - readsize = 256; - delay = 3; - ; - - memory "signature" - size = 3; - ; - - memory "lock" - size = 1; - ; - - memory "calibration" - size = 1; - ; - - memory "fuse" - size = 1; - ; -; - -#------------------------------------------------------------ -# ATtiny12 -#------------------------------------------------------------ - -part - id = "t12"; - desc = "ATtiny12"; - stk500_devcode = 0x12; - avr910_devcode = 0x55; - signature = 0x1e 0x90 0x05; - chip_erase_delay = 20000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, - 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, - 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; - hventerstabdelay = 100; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 0; - resetdelayus = 50; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - memory "eeprom" - size = 64; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 x x x x x x x x", - "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 x x x x x x x x", - "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 8; - blocksize = 64; - readsize = 256; - ; - - memory "flash" - size = 1024; - min_write_delay = 4500; - max_write_delay = 20000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 5; - blocksize = 128; - readsize = 256; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x o o x"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "fuse" - size = 1; - read = "0 1 0 1 0 0 0 0 x x x x x x x x", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x", - "x x x x x x x x i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; -; - -#------------------------------------------------------------ -# ATtiny13 -#------------------------------------------------------------ - -part - id = "t13"; - desc = "ATtiny13"; - has_debugwire = yes; - flash_instr = 0xB4, 0x0E, 0x1E; - eeprom_instr = 0xBB, 0xFE, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x0E, 0xB4, 0x0E, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; - stk500_devcode = 0x14; - signature = 0x1e 0x90 0x07; - chip_erase_delay = 4000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, - 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, - 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 0; - resetdelayus = 90; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - ocdrev = 0; - - memory "eeprom" - size = 64; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", - "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", - "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 5; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 1024; - page_size = 32; - num_pages = 32; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 0 0 0 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 0 0 0 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 0 0 0 a8", - " a7 a6 a5 a4 x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "calibration" - size = 2; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - ; - -; - - -#------------------------------------------------------------ -# ATtiny15 -#------------------------------------------------------------ - -part - id = "t15"; - desc = "ATtiny15"; - stk500_devcode = 0x13; - avr910_devcode = 0x56; - signature = 0x1e 0x90 0x06; - chip_erase_delay = 8200; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, - 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, - 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; - hventerstabdelay = 100; - hvspcmdexedelay = 5; - synchcycles = 6; - latchcycles = 16; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 0; - resetdelayus = 50; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - memory "eeprom" - size = 64; - min_write_delay = 8200; - max_write_delay = 8200; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 x x x x x x x x", - "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 x x x x x x x x", - "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 10; - blocksize = 64; - readsize = 256; - ; - - memory "flash" - size = 1024; - min_write_delay = 4100; - max_write_delay = 4100; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 5; - blocksize = 128; - readsize = 256; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x o o x"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "fuse" - size = 1; - read = "0 1 0 1 0 0 0 0 x x x x x x x x", - "x x x x x x x x o o o o x x o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x", - "x x x x x x x x i i i i 1 1 i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; -; - -#------------------------------------------------------------ -# AT90s1200 -#------------------------------------------------------------ - -part - id = "1200"; - desc = "AT90S1200"; - is_at90s1200 = yes; - stk500_devcode = 0x33; - avr910_devcode = 0x13; - signature = 0x1e 0x90 0x01; - pagel = 0xd7; - bs2 = 0xa0; - chip_erase_delay = 20000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 1; - bytedelay = 0; - pollindex = 0; - pollvalue = 0xFF; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 15; - chiperasepolltimeout = 0; - programfusepulsewidth = 2; - programfusepolltimeout = 0; - programlockpulsewidth = 0; - programlockpolltimeout = 1; - - memory "eeprom" - size = 64; - min_write_delay = 4000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 x x x x x x x x", - "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 x x x x x x x x", - "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 20; - blocksize = 32; - readsize = 256; - ; - memory "flash" - size = 1024; - min_write_delay = 4000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x02; - delay = 15; - blocksize = 128; - readsize = 256; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "fuse" - size = 1; - ; - memory "lock" - size = 1; - min_write_delay = 9000; - max_write_delay = 20000; - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - ; - ; - -#------------------------------------------------------------ -# AT90s4414 -#------------------------------------------------------------ - -part - id = "4414"; - desc = "AT90S4414"; - stk500_devcode = 0x50; - avr910_devcode = 0x28; - signature = 0x1e 0x92 0x01; - chip_erase_delay = 20000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 15; - chiperasepolltimeout = 0; - programfusepulsewidth = 2; - programfusepolltimeout = 0; - programlockpulsewidth = 0; - programlockpolltimeout = 1; - - memory "eeprom" - size = 256; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0x80; - readback_p2 = 0x7f; - read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 64; - readsize = 256; - ; - memory "flash" - size = 4096; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0x7f; - readback_p2 = 0x7f; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 64; - readsize = 256; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "fuse" - size = 1; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - ; - -#------------------------------------------------------------ -# AT90s2313 -#------------------------------------------------------------ - -part - id = "2313"; - desc = "AT90S2313"; - stk500_devcode = 0x40; - avr910_devcode = 0x20; - signature = 0x1e 0x91 0x01; - chip_erase_delay = 20000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 15; - chiperasepolltimeout = 0; - programfusepulsewidth = 2; - programfusepolltimeout = 0; - programlockpulsewidth = 0; - programlockpolltimeout = 1; - - memory "eeprom" - size = 128; - min_write_delay = 4000; - max_write_delay = 9000; - readback_p1 = 0x80; - readback_p2 = 0x7f; - read = "1 0 1 0 0 0 0 0 x x x x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 x x x x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 64; - readsize = 256; - ; - memory "flash" - size = 2048; - min_write_delay = 4000; - max_write_delay = 9000; - readback_p1 = 0x7f; - readback_p2 = 0x7f; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 256; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "fuse" - size = 1; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x i i x", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - ; - -#------------------------------------------------------------ -# AT90s2333 -#------------------------------------------------------------ - -part - id = "2333"; -##### WARNING: No XML file for device 'AT90S2333'! ##### - desc = "AT90S2333"; - stk500_devcode = 0x42; - avr910_devcode = 0x34; - signature = 0x1e 0x91 0x05; - chip_erase_delay = 20000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 15; - chiperasepolltimeout = 0; - programfusepulsewidth = 2; - programfusepolltimeout = 0; - programlockpulsewidth = 0; - programlockpolltimeout = 1; - - memory "eeprom" - size = 128; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0x00; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 x x x x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 x x x x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 256; - ; - - memory "flash" - size = 2048; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 256; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "fuse" - size = 1; - min_write_delay = 9000; - max_write_delay = 20000; - pwroff_after_write = yes; - read = "0 1 0 1 0 0 0 0 x x x x x x x x", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i", - "x x x x x x x x x x x x x x x x"; - ; - memory "lock" - size = 1; - min_write_delay = 9000; - max_write_delay = 20000; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x o o x"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - ; - ; - - -#------------------------------------------------------------ -# AT90s2343 (also AT90s2323 and ATtiny22) -#------------------------------------------------------------ - -part - id = "2343"; - desc = "AT90S2343"; - stk500_devcode = 0x43; - avr910_devcode = 0x4c; - signature = 0x1e 0x91 0x03; - chip_erase_delay = 18000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, - 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, - 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; - hventerstabdelay = 100; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 0; - poweroffdelay = 25; - resetdelayms = 0; - resetdelayus = 50; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - memory "eeprom" - size = 128; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0x00; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0", - "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0", - "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 64; - readsize = 256; - ; - memory "flash" - size = 2048; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 128; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "fuse" - size = 1; - min_write_delay = 9000; - max_write_delay = 20000; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x o o o x x x x o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 1 1 1 1 i", - "x x x x x x x x x x x x x x x x"; - ; - memory "lock" - size = 1; - min_write_delay = 9000; - max_write_delay = 20000; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x o o o x x x x o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - ; - ; - - -#------------------------------------------------------------ -# AT90s4433 -#------------------------------------------------------------ - -part - id = "4433"; - desc = "AT90S4433"; - stk500_devcode = 0x51; - avr910_devcode = 0x30; - signature = 0x1e 0x92 0x03; - chip_erase_delay = 20000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 15; - chiperasepolltimeout = 0; - programfusepulsewidth = 2; - programfusepolltimeout = 0; - programlockpulsewidth = 0; - programlockpolltimeout = 1; - - memory "eeprom" - size = 256; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0x00; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0 x x x x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0 x x x x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 256; - ; - memory "flash" - size = 4096; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 256; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "fuse" - size = 1; - min_write_delay = 9000; - max_write_delay = 20000; - pwroff_after_write = yes; - read = "0 1 0 1 0 0 0 0 x x x x x x x x", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i", - "x x x x x x x x x x x x x x x x"; - ; - memory "lock" - size = 1; - min_write_delay = 9000; - max_write_delay = 20000; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x o o x"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - ; - ; - -#------------------------------------------------------------ -# AT90s4434 -#------------------------------------------------------------ - -part - id = "4434"; -##### WARNING: No XML file for device 'AT90S4434'! ##### - desc = "AT90S4434"; - stk500_devcode = 0x52; - avr910_devcode = 0x6c; - signature = 0x1e 0x92 0x02; - chip_erase_delay = 20000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - memory "eeprom" - size = 256; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0x00; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0 x x x x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0 x x x x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - ; - memory "flash" - size = 4096; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "fuse" - size = 1; - min_write_delay = 9000; - max_write_delay = 20000; - read = "0 1 0 1 0 0 0 0 x x x x x x x x", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i", - "x x x x x x x x x x x x x x x x"; - ; - memory "lock" - size = 1; - min_write_delay = 9000; - max_write_delay = 20000; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x o o x"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - ; - ; - -#------------------------------------------------------------ -# AT90s8515 -#------------------------------------------------------------ - -part - id = "8515"; - desc = "AT90S8515"; - stk500_devcode = 0x60; - avr910_devcode = 0x38; - signature = 0x1e 0x93 0x01; - chip_erase_delay = 20000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 15; - chiperasepolltimeout = 0; - programfusepulsewidth = 2; - programfusepolltimeout = 0; - programlockpulsewidth = 0; - programlockpolltimeout = 1; - - memory "eeprom" - size = 512; - min_write_delay = 4000; - max_write_delay = 9000; - readback_p1 = 0x80; - readback_p2 = 0x7f; - read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 256; - ; - memory "flash" - size = 8192; - min_write_delay = 4000; - max_write_delay = 9000; - readback_p1 = 0x7f; - readback_p2 = 0x7f; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 256; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "fuse" - size = 1; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - ; - -#------------------------------------------------------------ -# AT90s8535 -#------------------------------------------------------------ - -part - id = "8535"; - desc = "AT90S8535"; - stk500_devcode = 0x61; - avr910_devcode = 0x68; - signature = 0x1e 0x93 0x03; - chip_erase_delay = 20000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 15; - chiperasepolltimeout = 0; - programfusepulsewidth = 2; - programfusepolltimeout = 0; - programlockpulsewidth = 0; - programlockpolltimeout = 1; - - memory "eeprom" - size = 512; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0x00; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 256; - ; - memory "flash" - size = 8192; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 256; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "fuse" - size = 1; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x x x o"; - write = "1 0 1 0 1 1 0 0 1 0 1 1 1 1 1 i", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x o o x x x x x x"; - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - ; - -#------------------------------------------------------------ -# ATmega103 -#------------------------------------------------------------ - -part - id = "m103"; - desc = "ATmega103"; - stk500_devcode = 0xB1; - avr910_devcode = 0x41; - signature = 0x1e 0x97 0x01; - chip_erase_delay = 112000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x8E, 0x9E, 0x2E, 0x3E, 0xAE, 0xBE, - 0x4E, 0x5E, 0xCE, 0xDE, 0x6E, 0x7E, 0xEE, 0xDE, - 0x66, 0x76, 0xE6, 0xF6, 0x6A, 0x7A, 0xEA, 0x7A, - 0x7F, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 15; - chiperasepolltimeout = 0; - programfusepulsewidth = 2; - programfusepolltimeout = 0; - programlockpulsewidth = 0; - programlockpolltimeout = 10; - - memory "eeprom" - size = 4096; - min_write_delay = 4000; - max_write_delay = 9000; - readback_p1 = 0x80; - readback_p2 = 0x7f; - read = " 1 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 64; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 131072; - page_size = 256; - num_pages = 512; - min_write_delay = 22000; - max_write_delay = 56000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x11; - delay = 70; - blocksize = 256; - readsize = 256; - ; - - memory "fuse" - size = 1; - read = "0 1 0 1 0 0 0 0 x x x x x x x x", - "x x x x x x x x x x o x o 1 o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 1 i 1 i i", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x o o x"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - - -#------------------------------------------------------------ -# ATmega64 -#------------------------------------------------------------ - -part - id = "m64"; - desc = "ATmega64"; - has_jtag = yes; - stk500_devcode = 0xA0; - avr910_devcode = 0x45; - signature = 0x1e 0x96 0x02; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x22; - spmcr = 0x68; - allowfullpagebitstream = yes; - - ocdrev = 2; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 2048; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 20; - blocksize = 64; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 65536; - page_size = 256; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 128; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 4; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - - - - -#------------------------------------------------------------ -# ATmega128 -#------------------------------------------------------------ - -part - id = "m128"; - desc = "ATmega128"; - has_jtag = yes; - stk500_devcode = 0xB2; - avr910_devcode = 0x43; - signature = 0x1e 0x97 0x02; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x22; - spmcr = 0x68; - rampz = 0x3b; - allowfullpagebitstream = yes; - - ocdrev = 1; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 4096; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 64; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 131072; - page_size = 256; - num_pages = 512; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 128; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 4; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# AT90CAN128 -#------------------------------------------------------------ - -part - id = "c128"; - desc = "AT90CAN128"; - has_jtag = yes; - stk500_devcode = 0xB3; -# avr910_devcode = 0x43; - signature = 0x1e 0x97 0x81; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - rampz = 0x3b; - eecr = 0x3f; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 4096; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - - mode = 0x41; - delay = 20; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 131072; - page_size = 256; - num_pages = 512; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# AT90CAN64 -#------------------------------------------------------------ - -part - id = "c64"; - desc = "AT90CAN64"; - has_jtag = yes; - stk500_devcode = 0xB3; -# avr910_devcode = 0x43; - signature = 0x1e 0x96 0x81; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - rampz = 0x3b; - eecr = 0x3f; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 2048; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - - mode = 0x41; - delay = 20; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 65536; - page_size = 256; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# AT90CAN32 -#------------------------------------------------------------ - -part - id = "c32"; - desc = "AT90CAN32"; - has_jtag = yes; - stk500_devcode = 0xB3; -# avr910_devcode = 0x43; - signature = 0x1e 0x95 0x81; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - rampz = 0x3b; - eecr = 0x3f; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 1024; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - - mode = 0x41; - delay = 20; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 32768; - page_size = 256; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - - -#------------------------------------------------------------ -# ATmega16 -#------------------------------------------------------------ - -part - id = "m16"; - desc = "ATmega16"; - has_jtag = yes; - stk500_devcode = 0x82; - avr910_devcode = 0x74; - signature = 0x1e 0x94 0x03; - pagel = 0xd7; - bs2 = 0xa0; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 100; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - allowfullpagebitstream = yes; - - ocdrev = 2; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 512; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x04; - delay = 10; - blocksize = 128; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 16384; - page_size = 128; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 128; - readsize = 256; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "calibration" - size = 4; - - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - ; - - -#------------------------------------------------------------ -# ATmega164P -#------------------------------------------------------------ - -# close to ATmega16 - -part parent "m16" - id = "m164p"; - desc = "ATmega164P"; - signature = 0x1e 0x94 0x0a; - - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - allowfullpagebitstream = no; - chip_erase_delay = 55000; - - ocdrev = 3; - ; - - -#------------------------------------------------------------ -# ATmega324P -#------------------------------------------------------------ - -# similar to ATmega164P - -part - id = "m324p"; - desc = "ATmega324P"; - has_jtag = yes; - stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one - avr910_devcode = 0x74; - signature = 0x1e 0x95 0x08; - pagel = 0xd7; - bs2 = 0xa0; - chip_erase_delay = 55000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 1024; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 128; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 32768; - page_size = 128; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 256; - readsize = 256; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x 1 1 1 1 1 i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - - -#------------------------------------------------------------ -# ATmega324PA -#------------------------------------------------------------ - -# similar to ATmega324P - -part parent "m324p" - id = "m324pa"; - desc = "ATmega324PA"; - signature = 0x1e 0x95 0x11; - - ocdrev = 3; - ; - - -#------------------------------------------------------------ -# ATmega644 -#------------------------------------------------------------ - -# similar to ATmega164 - -part - id = "m644"; - desc = "ATmega644"; - has_jtag = yes; - stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one - avr910_devcode = 0x74; - signature = 0x1e 0x96 0x09; - pagel = 0xd7; - bs2 = 0xa0; - chip_erase_delay = 55000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 2048; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 128; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 65536; - page_size = 256; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 256; - readsize = 256; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x 1 1 1 1 1 i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega644P -#------------------------------------------------------------ - -# similar to ATmega164p - -part parent "m644" - id = "m644p"; - desc = "ATmega644P"; - signature = 0x1e 0x96 0x0a; - - ocdrev = 3; - ; - - - -#------------------------------------------------------------ -# ATmega1284P -#------------------------------------------------------------ - -# similar to ATmega164p - -part - id = "m1284p"; - desc = "ATmega1284P"; - has_jtag = yes; - stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one - avr910_devcode = 0x74; - signature = 0x1e 0x97 0x05; - pagel = 0xd7; - bs2 = 0xa0; - chip_erase_delay = 55000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 4096; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 128; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 131072; - page_size = 256; - num_pages = 512; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 256; - readsize = 256; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x 1 1 1 1 1 i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - - - -#------------------------------------------------------------ -# ATmega162 -#------------------------------------------------------------ - -part - id = "m162"; - desc = "ATmega162"; - has_jtag = yes; - stk500_devcode = 0x83; - avr910_devcode = 0x63; - signature = 0x1e 0x94 0x04; - chip_erase_delay = 9000; - pagel = 0xd7; - bs2 = 0xa0; - - idr = 0x04; - spmcr = 0x57; - allowfullpagebitstream = yes; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - ocdrev = 2; - - memory "flash" - paged = yes; - size = 16384; - page_size = 128; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - mode = 0x41; - delay = 10; - blocksize = 128; - readsize = 256; - - ; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 512; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - - read = " 1 0 1 0 0 0 0 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 16000; - max_write_delay = 16000; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 16000; - max_write_delay = 16000; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - min_write_delay = 16000; - max_write_delay = 16000; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x 1 1 1 1 1 i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 16000; - max_write_delay = 16000; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "signature" - size = 3; - - read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - - read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; -; - - - -#------------------------------------------------------------ -# ATmega163 -#------------------------------------------------------------ - -part - id = "m163"; - desc = "ATmega163"; - stk500_devcode = 0x81; - avr910_devcode = 0x64; - signature = 0x1e 0x94 0x02; - chip_erase_delay = 32000; - pagel = 0xd7; - bs2 = 0xa0; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 30; - programfusepulsewidth = 0; - programfusepolltimeout = 2; - programlockpulsewidth = 0; - programlockpolltimeout = 2; - - - memory "eeprom" - size = 512; - min_write_delay = 4000; - max_write_delay = 4000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 16384; - page_size = 128; - num_pages = 128; - min_write_delay = 16000; - max_write_delay = 16000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x11; - delay = 20; - blocksize = 128; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o x x o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i 1 1 i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x x 1 o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x 1 1 1 1 1 i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x 0 x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega169 -#------------------------------------------------------------ - -part - id = "m169"; - desc = "ATmega169"; - has_jtag = yes; - stk500_devcode = 0x85; - avr910_devcode = 0x78; - signature = 0x1e 0x94 0x05; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - - ocdrev = 2; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 512; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 16384; - page_size = 128; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 128; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - ; - - memory "lock" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega329 -#------------------------------------------------------------ - -part - id = "m329"; - desc = "ATmega329"; - has_jtag = yes; -# stk500_devcode = 0x85; # no STK500 support, only STK500v2 -# avr910_devcode = 0x?; # try the ATmega169 one: - avr910_devcode = 0x75; - signature = 0x1e 0x95 0x03; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 1024; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 32768; - page_size = 128; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega329P -#------------------------------------------------------------ -# Identical to ATmega329 except of the signature - -part parent "m329" - id = "m329p"; - desc = "ATmega329P"; - signature = 0x1e 0x95 0x0b; - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# ATmega3290 -#------------------------------------------------------------ - -# identical to ATmega329 - -part parent "m329" - id = "m3290"; - desc = "ATmega3290"; - signature = 0x1e 0x95 0x04; - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# ATmega3290P -#------------------------------------------------------------ - -# identical to ATmega3290 except of the signature - -part parent "m3290" - id = "m3290p"; - desc = "ATmega3290P"; - signature = 0x1e 0x95 0x0c; - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# ATmega649 -#------------------------------------------------------------ - -part - id = "m649"; - desc = "ATmega649"; - has_jtag = yes; -# stk500_devcode = 0x85; # no STK500 support, only STK500v2 -# avr910_devcode = 0x?; # try the ATmega169 one: - avr910_devcode = 0x75; - signature = 0x1e 0x96 0x03; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 2048; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 65536; - page_size = 256; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega6490 -#------------------------------------------------------------ - -# identical to ATmega649 - -part parent "m649" - id = "m6490"; - desc = "ATmega6490"; - signature = 0x1e 0x96 0x04; - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# ATmega32 -#------------------------------------------------------------ - -part - id = "m32"; - desc = "ATmega32"; - has_jtag = yes; - stk500_devcode = 0x91; - avr910_devcode = 0x72; - signature = 0x1e 0x95 0x02; - chip_erase_delay = 9000; - pagel = 0xd7; - bs2 = 0xa0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - allowfullpagebitstream = yes; - - ocdrev = 2; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 1024; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x04; - delay = 10; - blocksize = 64; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 32768; - page_size = 128; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 64; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 4; - read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega161 -#------------------------------------------------------------ - -part - id = "m161"; - desc = "ATmega161"; - stk500_devcode = 0x80; - avr910_devcode = 0x60; - signature = 0x1e 0x94 0x01; - chip_erase_delay = 28000; - pagel = 0xd7; - bs2 = 0xa0; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 30; - programfusepulsewidth = 0; - programfusepolltimeout = 2; - programlockpulsewidth = 0; - programlockpolltimeout = 2; - - memory "eeprom" - size = 512; - min_write_delay = 3400; - max_write_delay = 3400; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 5; - blocksize = 128; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 16384; - page_size = 128; - num_pages = 128; - min_write_delay = 14000; - max_write_delay = 14000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 16; - blocksize = 128; - readsize = 256; - ; - - memory "fuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 0 0 0 0 x x x x x x x x", - "x x x x x x x x x o x o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x", - "x x x x x x x x 1 i 1 i i i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - - -#------------------------------------------------------------ -# ATmega8 -#------------------------------------------------------------ - -part - id = "m8"; - desc = "ATmega8"; - stk500_devcode = 0x70; - avr910_devcode = 0x76; - signature = 0x1e 0x93 0x07; - pagel = 0xd7; - bs2 = 0xc2; - chip_erase_delay = 10000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 2; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - memory "eeprom" - size = 512; - page_size = 4; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 20; - blocksize = 128; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 0 x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 0 x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 10; - blocksize = 64; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "calibration" - size = 4; - read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - - - -#------------------------------------------------------------ -# ATmega8515 -#------------------------------------------------------------ - -part - id = "m8515"; - desc = "ATmega8515"; - stk500_devcode = 0x63; - avr910_devcode = 0x3A; - signature = 0x1e 0x93 0x06; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - memory "eeprom" - size = 512; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 20; - blocksize = 128; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 0 x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 0 x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 64; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "calibration" - size = 4; - read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - - - - -#------------------------------------------------------------ -# ATmega8535 -#------------------------------------------------------------ - -part - id = "m8535"; - desc = "ATmega8535"; - stk500_devcode = 0x64; - avr910_devcode = 0x69; - signature = 0x1e 0x93 0x08; - pagel = 0xd7; - bs2 = 0xa0; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - memory "eeprom" - size = 512; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 20; - blocksize = 128; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 0 x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 0 x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 64; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "calibration" - size = 4; - read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - - -#------------------------------------------------------------ -# ATtiny26 -#------------------------------------------------------------ - -part - id = "t26"; - desc = "ATtiny26"; - stk500_devcode = 0x21; - avr910_devcode = 0x5e; - signature = 0x1e 0x91 0x09; - pagel = 0xb3; - bs2 = 0xb2; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, - 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, - 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, - 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 2; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - memory "eeprom" - size = 128; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 x x x x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 x x x x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 10; - blocksize = 64; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 2048; - page_size = 32; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 16; - readsize = 256; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x x o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x x x x i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 4; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - -; - - -#------------------------------------------------------------ -# ATtiny261 -#------------------------------------------------------------ -# Close to ATtiny26 - -part - id = "t261"; - desc = "ATtiny261"; - has_debugwire = yes; - flash_instr = 0xB4, 0x00, 0x10; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x00, 0xB4, 0x00, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; -# stk500_devcode = 0x21; -# avr910_devcode = 0x5e; - signature = 0x1e 0x91 0x0c; - pagel = 0xb3; - bs2 = 0xb2; - chip_erase_delay = 4000; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, - 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, - 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, - 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 2; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; - size = 128; - page_size = 4; - num_pages = 32; - min_write_delay = 4000; - max_write_delay = 4000; - readback_p1 = 0xff; - readback_p2 = 0xff; - - read = "1 0 1 0 0 0 0 0 x x x x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 x x x x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 2048; - page_size = 32; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x x o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x x x x x o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - -; - - -#------------------------------------------------------------ -# ATtiny461 -#------------------------------------------------------------ -# Close to ATtiny261 - -part - id = "t461"; - desc = "ATtiny461"; - has_debugwire = yes; - flash_instr = 0xB4, 0x00, 0x10; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x00, 0xB4, 0x00, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; -# stk500_devcode = 0x21; -# avr910_devcode = 0x5e; - signature = 0x1e 0x92 0x08; - pagel = 0xb3; - bs2 = 0xb2; - chip_erase_delay = 4000; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, - 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, - 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, - 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 2; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; - size = 256; - page_size = 4; - num_pages = 64; - min_write_delay = 4000; - max_write_delay = 4000; - readback_p1 = 0xff; - readback_p2 = 0xff; - - read = " 1 0 1 0 0 0 0 0 x x x x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0 x x x x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 4096; - page_size = 64; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 64; - readsize = 256; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x x o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x x x x x o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - -; - - -#------------------------------------------------------------ -# ATtiny861 -#------------------------------------------------------------ -# Close to ATtiny461 - -part - id = "t861"; - desc = "ATtiny861"; - has_debugwire = yes; - flash_instr = 0xB4, 0x00, 0x10; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x00, 0xB4, 0x00, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; -# stk500_devcode = 0x21; -# avr910_devcode = 0x5e; - signature = 0x1e 0x93 0x0d; - pagel = 0xb3; - bs2 = 0xb2; - chip_erase_delay = 4000; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, - 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, - 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, - 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 2; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; - size = 512; - num_pages = 128; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4000; - readback_p1 = 0xff; - readback_p2 = 0xff; - - read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 64; - readsize = 256; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x x o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x x x x x o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - -; - - -#------------------------------------------------------------ -# ATmega48 -#------------------------------------------------------------ - -part - id = "m48"; - desc = "ATmega48"; - has_debugwire = yes; - flash_instr = 0xB6, 0x01, 0x11; - eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, - 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, - 0x99, 0xF9, 0xBB, 0xAF; - stk500_devcode = 0x59; -# avr910_devcode = 0x; - signature = 0x1e 0x92 0x05; - pagel = 0xd7; - bs2 = 0xc2; - chip_erase_delay = 45000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; - page_size = 4; - size = 256; - min_write_delay = 3600; - max_write_delay = 3600; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 x x x x x", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 4096; - page_size = 64; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 64; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x x x x x o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega48P -#------------------------------------------------------------ - -part parent "m48" - id = "m48p"; - desc = "ATmega48P"; - signature = 0x1e 0x92 0x0a; - - ocdrev = 1; - ; - -#------------------------------------------------------------ -# ATmega88 -#------------------------------------------------------------ - -part - id = "m88"; - desc = "ATmega88"; - has_debugwire = yes; - flash_instr = 0xB6, 0x01, 0x11; - eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, - 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, - 0x99, 0xF9, 0xBB, 0xAF; - stk500_devcode = 0x73; -# avr910_devcode = 0x; - signature = 0x1e 0x93 0x0a; - pagel = 0xd7; - bs2 = 0xc2; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; - page_size = 4; - size = 512; - min_write_delay = 3600; - max_write_delay = 3600; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 64; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x x x o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega88P -#------------------------------------------------------------ - -part parent "m88" - id = "m88p"; - desc = "ATmega88P"; - signature = 0x1e 0x93 0x0f; - - ocdrev = 1; - ; - -#------------------------------------------------------------ -# ATmega168 -#------------------------------------------------------------ - -part - id = "m168"; - desc = "ATmega168"; - has_debugwire = yes; - flash_instr = 0xB6, 0x01, 0x11; - eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, - 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, - 0x99, 0xF9, 0xBB, 0xAF; - stk500_devcode = 0x86; - # avr910_devcode = 0x; - signature = 0x1e 0x94 0x06; - pagel = 0xd7; - bs2 = 0xc2; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; - page_size = 4; - size = 512; - min_write_delay = 3600; - max_write_delay = 3600; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 16384; - page_size = 128; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 128; - readsize = 256; - - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x x x o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; -; - -#------------------------------------------------------------ -# ATmega168P -#------------------------------------------------------------ - -part parent "m168" - id = "m168p"; - desc = "ATmega168P"; - signature = 0x1e 0x94 0x0b; - - ocdrev = 1; -; - -#------------------------------------------------------------ -# ATtiny88 -#------------------------------------------------------------ - -part - id = "t88"; - desc = "ATtiny88"; - has_debugwire = yes; - flash_instr = 0xB6, 0x01, 0x11; - eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, - 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, - 0x99, 0xF9, 0xBB, 0xAF; - stk500_devcode = 0x73; -# avr910_devcode = 0x; - signature = 0x1e 0x93 0x11; - pagel = 0xd7; - bs2 = 0xc2; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; - page_size = 4; - size = 64; - min_write_delay = 3600; - max_write_delay = 3600; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 64; - ; - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 64; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x x x o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega328 -#------------------------------------------------------------ - -part - id = "m328"; - desc = "ATmega328"; - has_debugwire = yes; - flash_instr = 0xB6, 0x01, 0x11; - eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, - 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, - 0x99, 0xF9, 0xBB, 0xAF; - stk500_devcode = 0x86; - # avr910_devcode = 0x; - signature = 0x1e 0x95 0x14; - pagel = 0xd7; - bs2 = 0xc2; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; - page_size = 4; - size = 1024; - min_write_delay = 3600; - max_write_delay = 3600; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 32768; - page_size = 128; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 128; - readsize = 256; - - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x x x o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; -; - -part parent "m328" - id = "m328p"; - desc = "ATmega328P"; - signature = 0x1e 0x95 0x0F; - - ocdrev = 1; -; - -#------------------------------------------------------------ -# ATtiny2313 -#------------------------------------------------------------ - -part - id = "t2313"; - desc = "ATtiny2313"; - has_debugwire = yes; - flash_instr = 0xB2, 0x0F, 0x1F; - eeprom_instr = 0xBB, 0xFE, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBA, 0x0F, 0xB2, 0x0F, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; - stk500_devcode = 0x23; -## Use the ATtiny26 devcode: - avr910_devcode = 0x5e; - signature = 0x1e 0x91 0x0a; - pagel = 0xD4; - bs2 = 0xD6; - reset = io; - chip_erase_delay = 9000; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0E, 0x1E, 0x2E, 0x3E, 0x2E, 0x3E, - 0x4E, 0x5E, 0x4E, 0x5E, 0x6E, 0x7E, 0x6E, 0x7E, - 0x26, 0x36, 0x66, 0x76, 0x2A, 0x3A, 0x6A, 0x7A, - 0x2E, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 0; - - memory "eeprom" - size = 128; - paged = no; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 2048; - page_size = 32; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - -# The information in the data sheet of April/2004 is wrong, this works: - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - -# The information in the data sheet of April/2004 is wrong, this works: - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - -# The information in the data sheet of April/2004 is wrong, this works: - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; -# ATtiny2313 has Signature Bytes: 0x1E 0x91 0x0A. - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; -# The Tiny2313 has calibration data for both 4 MHz and 8 MHz. -# The information in the data sheet of April/2004 is wrong, this works: - - memory "calibration" - size = 2; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATtiny4313 -#------------------------------------------------------------ - -part - id = "t4313"; - desc = "ATtiny4313"; - has_debugwire = yes; - flash_instr = 0xB2, 0x0F, 0x1F; - eeprom_instr = 0xBB, 0xFE, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBA, 0x0F, 0xB2, 0x0F, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; - stk500_devcode = 0x23; -## Use the ATtiny26 devcode: - avr910_devcode = 0x5e; - signature = 0x1e 0x92 0x0d; - pagel = 0xD4; - bs2 = 0xD6; - reset = io; - chip_erase_delay = 9000; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0E, 0x1E, 0x2E, 0x3E, 0x2E, 0x3E, - 0x4E, 0x5E, 0x4E, 0x5E, 0x6E, 0x7E, 0x6E, 0x7E, - 0x26, 0x36, 0x66, 0x76, 0x2A, 0x3A, 0x6A, 0x7A, - 0x2E, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 0; - - memory "eeprom" - size = 256; - paged = no; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 4096; - page_size = 64; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; -# ATtiny4313 has Signature Bytes: 0x1E 0x92 0x0D. - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 2; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# AT90PWM2 -#------------------------------------------------------------ - -part - id = "pwm2"; - desc = "AT90PWM2"; - has_debugwire = yes; - flash_instr = 0xB6, 0x01, 0x11; - eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, - 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, - 0x99, 0xF9, 0xBB, 0xAF; - stk500_devcode = 0x65; -## avr910_devcode = ?; - signature = 0x1e 0x93 0x81; - pagel = 0xD8; - bs2 = 0xE2; - reset = io; - chip_erase_delay = 9000; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - memory "eeprom" - size = 512; - paged = no; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 64; - readsize = 256; - ; -# AT90PWM2 has Signature Bytes: 0x1E 0x93 0x81. - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# AT90PWM3 -#------------------------------------------------------------ - -# Completely identical to AT90PWM2 (including the signature!) - -part parent "pwm2" - id = "pwm3"; - desc = "AT90PWM3"; - ; - -#------------------------------------------------------------ -# AT90PWM2B -#------------------------------------------------------------ -# Same as AT90PWM2 but different signature. - -part parent "pwm2" - id = "pwm2b"; - desc = "AT90PWM2B"; - signature = 0x1e 0x93 0x83; - - ocdrev = 1; - ; - -#------------------------------------------------------------ -# AT90PWM3B -#------------------------------------------------------------ - -# Completely identical to AT90PWM2B (including the signature!) - -part parent "pwm2b" - id = "pwm3b"; - desc = "AT90PWM3B"; - - ocdrev = 1; - ; - -#------------------------------------------------------------ -# AT90PWM316 -#------------------------------------------------------------ - -# Similar to AT90PWM3B, but with 16 kiB flash, 512 B EEPROM, and 1024 B SRAM. - -part parent "pwm3b" - id = "pwm316"; - desc = "AT90PWM316"; - signature = 0x1e 0x94 0x83; - - ocdrev = 1; - - memory "flash" - paged = yes; - size = 16384; - page_size = 128; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 128; - readsize = 256; - ; - ; - -#------------------------------------------------------------ -# ATtiny25 -#------------------------------------------------------------ - -part - id = "t25"; - desc = "ATtiny25"; - has_debugwire = yes; - flash_instr = 0xB4, 0x02, 0x12; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; -## no STK500 devcode in XML file, use the ATtiny45 one - stk500_devcode = 0x14; -## avr910_devcode = ?; -## Try the AT90S2313 devcode: - avr910_devcode = 0x20; - signature = 0x1e 0x91 0x08; - reset = io; - chip_erase_delay = 4500; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, - 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, - 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; - hventerstabdelay = 100; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - ocdrev = 1; - - memory "eeprom" - size = 128; - paged = no; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 2048; - page_size = 32; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; -# ATtiny25 has Signature Bytes: 0x1E 0x91 0x08. - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 2; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATtiny45 -#------------------------------------------------------------ - -part - id = "t45"; - desc = "ATtiny45"; - has_debugwire = yes; - flash_instr = 0xB4, 0x02, 0x12; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; - stk500_devcode = 0x14; -## avr910_devcode = ?; -## Try the AT90S2313 devcode: - avr910_devcode = 0x20; - signature = 0x1e 0x92 0x06; - reset = io; - chip_erase_delay = 4500; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, - 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, - 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - ocdrev = 1; - - memory "eeprom" - size = 256; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 4096; - page_size = 64; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; -# ATtiny45 has Signature Bytes: 0x1E 0x92 0x08. (Data sheet 2586C-AVR-06/05 (doc2586.pdf) indicates otherwise!) - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 2; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATtiny85 -#------------------------------------------------------------ - -part - id = "t85"; - desc = "ATtiny85"; - has_debugwire = yes; - flash_instr = 0xB4, 0x02, 0x12; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; -## no STK500 devcode in XML file, use the ATtiny45 one - stk500_devcode = 0x14; -## avr910_devcode = ?; -## Try the AT90S2313 devcode: - avr910_devcode = 0x20; - signature = 0x1e 0x93 0x0b; - reset = io; - chip_erase_delay = 400000; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, - 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, - 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; - hventerstabdelay = 100; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - ocdrev = 1; - - memory "eeprom" - size = 512; - paged = no; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 12; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 30000; - max_write_delay = 30000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; -# ATtiny85 has Signature Bytes: 0x1E 0x93 0x08. - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 2; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega640 -#------------------------------------------------------------ -# Almost same as ATmega1280, except for different memory sizes - -part - id = "m640"; - desc = "ATmega640"; - signature = 0x1e 0x96 0x08; - has_jtag = yes; -# stk500_devcode = 0xB2; -# avr910_devcode = 0x43; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - rampz = 0x3b; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 4096; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 65536; - page_size = 256; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega1280 -#------------------------------------------------------------ - -part - id = "m1280"; - desc = "ATmega1280"; - signature = 0x1e 0x97 0x03; - has_jtag = yes; -# stk500_devcode = 0xB2; -# avr910_devcode = 0x43; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - rampz = 0x3b; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 4096; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 131072; - page_size = 256; - num_pages = 512; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega1281 -#------------------------------------------------------------ -# Identical to ATmega1280 - -part parent "m1280" - id = "m1281"; - desc = "ATmega1281"; - signature = 0x1e 0x97 0x04; - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# ATmega2560 -#------------------------------------------------------------ - -part - id = "m2560"; - desc = "ATmega2560"; - signature = 0x1e 0x98 0x01; - has_jtag = yes; -# stk500_devcode = 0xB2; -# avr910_devcode = 0x43; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - rampz = 0x3b; - allowfullpagebitstream = no; - - ocdrev = 4; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 4096; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 262144; - page_size = 256; - num_pages = 1024; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - load_ext_addr = " 0 1 0 0 1 1 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 0 a16", - " 0 0 0 0 0 0 0 0"; - - mode = 0x41; - delay = 10; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega2561 -#------------------------------------------------------------ - -part parent "m2560" - id = "m2561"; - desc = "ATmega2561"; - signature = 0x1e 0x98 0x02; - - ocdrev = 4; - ; - -#------------------------------------------------------------ -# ATmega128RFA1 -#------------------------------------------------------------ -# Identical to ATmega2561 but half the ROM - -part parent "m2561" - id = "m128rfa1"; - desc = "ATmega128RFA1"; - signature = 0x1e 0xa7 0x01; - chip_erase_delay = 55000; - bs2 = 0xE2; - - ocdrev = 3; - - memory "flash" - paged = yes; - size = 131072; - page_size = 256; - num_pages = 512; - min_write_delay = 50000; - max_write_delay = 50000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 256; - readsize = 256; - ; - ; - -#------------------------------------------------------------ -# ATmega256RFR2 -#------------------------------------------------------------ - -part parent "m2561" - id = "m256rfr2"; - desc = "ATmega256RFR2"; - signature = 0x1e 0xa8 0x02; - chip_erase_delay = 55000; - bs2 = 0xE2; - - - ocdrev = 4; - ; - -#------------------------------------------------------------ -# ATmega128RFR2 -#------------------------------------------------------------ - -part parent "m128rfa1" - id = "m128rfr2"; - desc = "ATmega128RFR2"; - signature = 0x1e 0xa7 0x02; - - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# ATmega64RFR2 -#------------------------------------------------------------ - -part parent "m128rfa1" - id = "m64rfr2"; - desc = "ATmega64RFR2"; - signature = 0x1e 0xa6 0x02; - - - ocdrev = 3; - - memory "flash" - paged = yes; - size = 65536; - page_size = 256; - num_pages = 256; - min_write_delay = 50000; - max_write_delay = 50000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 256; - readsize = 256; - ; - ; - -#------------------------------------------------------------ -# ATmega2564RFR2 -#------------------------------------------------------------ - -part parent "m256rfr2" - id = "m2564rfr2"; - desc = "ATmega2564RFR2"; - signature = 0x1e 0xa8 0x03; - ; - -#------------------------------------------------------------ -# ATmega1284RFR2 -#------------------------------------------------------------ - -part parent "m128rfr2" - id = "m1284rfr2"; - desc = "ATmega1284RFR2"; - signature = 0x1e 0xa7 0x03; - ; - -#------------------------------------------------------------ -# ATmega644RFR2 -#------------------------------------------------------------ - -part parent "m64rfr2" - id = "m644rfr2"; - desc = "ATmega644RFR2"; - signature = 0x1e 0xa6 0x03; - ; - -#------------------------------------------------------------ -# ATtiny24 -#------------------------------------------------------------ - -part - id = "t24"; - desc = "ATtiny24"; - has_debugwire = yes; - flash_instr = 0xB4, 0x07, 0x17; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; -## no STK500 devcode in XML file, use the ATtiny45 one - stk500_devcode = 0x14; -## avr910_devcode = ?; -## Try the AT90S2313 devcode: - avr910_devcode = 0x20; - signature = 0x1e 0x91 0x0b; - reset = io; - chip_erase_delay = 4500; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, - 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, - 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0F; - hventerstabdelay = 100; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 0; - resetdelayus = 70; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - ocdrev = 1; - - memory "eeprom" - size = 128; - paged = no; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 2048; - page_size = 32; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; -# ATtiny24 has Signature Bytes: 0x1E 0x91 0x0B. - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x x x x x x x i i"; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATtiny44 -#------------------------------------------------------------ - -part - id = "t44"; - desc = "ATtiny44"; - has_debugwire = yes; - flash_instr = 0xB4, 0x07, 0x17; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; -## no STK500 devcode in XML file, use the ATtiny45 one - stk500_devcode = 0x14; -## avr910_devcode = ?; -## Try the AT90S2313 devcode: - avr910_devcode = 0x20; - signature = 0x1e 0x92 0x07; - reset = io; - chip_erase_delay = 4500; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, - 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, - 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0F; - hventerstabdelay = 100; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 0; - resetdelayus = 70; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - ocdrev = 1; - - memory "eeprom" - size = 256; - paged = no; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 4096; - page_size = 64; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; -# ATtiny44 has Signature Bytes: 0x1E 0x92 0x07. - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x x x x x x x i i"; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATtiny84 -#------------------------------------------------------------ - -part - id = "t84"; - desc = "ATtiny84"; - has_debugwire = yes; - flash_instr = 0xB4, 0x07, 0x17; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; -## no STK500 devcode in XML file, use the ATtiny45 one - stk500_devcode = 0x14; -## avr910_devcode = ?; -## Try the AT90S2313 devcode: - avr910_devcode = 0x20; - signature = 0x1e 0x93 0x0c; - reset = io; - chip_erase_delay = 4500; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, - 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, - 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0F; - hventerstabdelay = 100; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 0; - resetdelayus = 70; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - ocdrev = 1; - - memory "eeprom" - size = 512; - paged = no; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; -# ATtiny84 has Signature Bytes: 0x1E 0x93 0x0C. - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x x x x x x x i i"; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATtiny43U -#------------------------------------------------------------ - -part - id = "t43u"; - desc = "ATtiny43u"; - has_debugwire = yes; - flash_instr = 0xB4, 0x07, 0x17; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; - stk500_devcode = 0x14; -## avr910_devcode = ?; -## Try the AT90S2313 devcode: - avr910_devcode = 0x20; - signature = 0x1e 0x92 0x0C; - reset = io; - chip_erase_delay = 1000; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - pp_controlstack = 0x0E, 0x1E, 0x0E, 0x1E, 0x2E, 0x3E, 0x2E, 0x3E, 0x4E, 0x5E, - 0x4E, 0x5E, 0x6E, 0x7E, 0x6E, 0x7E, 0x06, 0x16, 0x46, 0x56, - 0x0A, 0x1A, 0x4A, 0x5A, 0x1E, 0x7C, 0x00, 0x01, 0x00, 0x00, - 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - hvspcmdexedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 20; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - memory "eeprom" - size = 64; - paged = yes; - page_size = 4; - num_pages = 16; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", - "0 0 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", - "0 0 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " 0 0 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 5; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 4096; - page_size = 64; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 64; - readsize = 256; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "calibration" - size = 2; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; -; - -#------------------------------------------------------------ -# ATmega32u4 -#------------------------------------------------------------ - -part - id = "m32u4"; - desc = "ATmega32U4"; - signature = 0x1e 0x95 0x87; - has_jtag = yes; -# stk500_devcode = 0xB2; -# avr910_devcode = 0x43; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - rampz = 0x3b; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 1024; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 32768; - page_size = 128; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 128; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# AT90USB646 -#------------------------------------------------------------ - -part - id = "usb646"; - desc = "AT90USB646"; - signature = 0x1e 0x96 0x82; - has_jtag = yes; -# stk500_devcode = 0xB2; -# avr910_devcode = 0x43; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - rampz = 0x3b; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 2048; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 65536; - page_size = 256; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# AT90USB647 -#------------------------------------------------------------ -# identical to AT90USB646 - -part parent "usb646" - id = "usb647"; - desc = "AT90USB647"; - signature = 0x1e 0x96 0x82; - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# AT90USB1286 -#------------------------------------------------------------ - -part - id = "usb1286"; - desc = "AT90USB1286"; - signature = 0x1e 0x97 0x82; - has_jtag = yes; -# stk500_devcode = 0xB2; -# avr910_devcode = 0x43; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - rampz = 0x3b; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 4096; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 131072; - page_size = 256; - num_pages = 512; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# AT90USB1287 -#------------------------------------------------------------ -# identical to AT90USB1286 - -part parent "usb1286" - id = "usb1287"; - desc = "AT90USB1287"; - signature = 0x1e 0x97 0x82; - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# AT90USB162 -#------------------------------------------------------------ - -part - id = "usb162"; - desc = "AT90USB162"; - has_jtag = no; - has_debugwire = yes; - signature = 0x1e 0x94 0x82; - chip_erase_delay = 9000; - reset = io; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - pagel = 0xD7; - bs2 = 0xC6; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 512; - num_pages = 128; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 16384; - page_size = 128; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 128; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# AT90USB82 -#------------------------------------------------------------ -# Changes against AT90USB162 (beside IDs) -# memory "flash" -# size = 8192; -# num_pages = 64; - -part - id = "usb82"; - desc = "AT90USB82"; - has_jtag = no; - has_debugwire = yes; - signature = 0x1e 0x93 0x82; - chip_erase_delay = 9000; - reset = io; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - pagel = 0xD7; - bs2 = 0xC6; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 512; - num_pages = 128; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 8192; - page_size = 128; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 128; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega32U2 -#------------------------------------------------------------ -# Changes against AT90USB162 (beside IDs) -# memory "flash" -# size = 32768; -# num_pages = 256; -# memory "eeprom" -# size = 1024; -# num_pages = 256; -part - id = "m32u2"; - desc = "ATmega32U2"; - has_jtag = no; - has_debugwire = yes; - signature = 0x1e 0x95 0x8a; - chip_erase_delay = 9000; - reset = io; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - pagel = 0xD7; - bs2 = 0xC6; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 1024; - num_pages = 256; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 32768; - page_size = 128; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 128; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; -#------------------------------------------------------------ -# ATmega16U2 -#------------------------------------------------------------ -# Changes against ATmega32U2 (beside IDs) -# memory "flash" -# size = 16384; -# num_pages = 128; -# memory "eeprom" -# size = 512; -# num_pages = 128; -part - id = "m16u2"; - desc = "ATmega16U2"; - has_jtag = no; - has_debugwire = yes; - signature = 0x1e 0x94 0x89; - chip_erase_delay = 9000; - reset = io; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - pagel = 0xD7; - bs2 = 0xC6; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 512; - num_pages = 128; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 16384; - page_size = 128; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 128; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega8U2 -#------------------------------------------------------------ -# Changes against ATmega16U2 (beside IDs) -# memory "flash" -# size = 8192; -# page_size = 64; -# blocksize = 64; - -part - id = "m8u2"; - desc = "ATmega8U2"; - has_jtag = no; - has_debugwire = yes; - signature = 0x1e 0x93 0x89; - chip_erase_delay = 9000; - reset = io; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - pagel = 0xD7; - bs2 = 0xC6; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 512; - num_pages = 128; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 64; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; -#------------------------------------------------------------ -# ATmega325 -#------------------------------------------------------------ - -part - id = "m325"; - desc = "ATmega325"; - signature = 0x1e 0x95 0x05; - has_jtag = yes; -# stk500_devcode = 0x??; # No STK500v1 support? -# avr910_devcode = 0x??; # Try the ATmega16 one - avr910_devcode = 0x74; - pagel = 0xd7; - bs2 = 0xa0; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 1024; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 32768; - page_size = 128; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 0 0 0 0 0", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 0 0 0 0 0", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 128; - readsize = 256; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0", - "0 0 0 0 0 0 0 0 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "0 0 0 0 0 0 0 0 i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "0 0 0 0 0 0 0 0 i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - - read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega645 -#------------------------------------------------------------ - -part - id = "m645"; - desc = "ATmega645"; - signature = 0x1E 0x96 0x05; - has_jtag = yes; -# stk500_devcode = 0x??; # No STK500v1 support? -# avr910_devcode = 0x??; # Try the ATmega16 one - avr910_devcode = 0x74; - pagel = 0xd7; - bs2 = 0xa0; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 2048; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 65536; - page_size = 256; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 0 0 0 0 0", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 0 0 0 0 0", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " 0 0 0 0 0 0 0 0"; - - mode = 0x41; - delay = 10; - blocksize = 128; - readsize = 256; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0", - "0 0 0 0 0 0 0 0 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "0 0 0 0 0 0 0 0 i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "0 0 0 0 0 0 0 0 i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - - read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega3250 -#------------------------------------------------------------ - -part parent "m325" - id = "m3250"; - desc = "ATmega3250"; - signature = 0x1E 0x95 0x06; - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# ATmega6450 -#------------------------------------------------------------ - -part parent "m645" - id = "m6450"; - desc = "ATmega6450"; - signature = 0x1E 0x96 0x06; - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# AVR XMEGA family common values -#------------------------------------------------------------ - -part - id = ".xmega"; - desc = "AVR XMEGA family common values"; - has_pdi = yes; - nvm_base = 0x01c0; - mcu_base = 0x0090; - - memory "signature" - size = 3; - offset = 0x1000090; - ; - - memory "prodsig" - size = 0x32; - offset = 0x8e0200; - page_size = 0x32; - readsize = 0x32; - ; - - memory "fuse1" - size = 1; - offset = 0x8f0021; - ; - - memory "fuse2" - size = 1; - offset = 0x8f0022; - ; - - memory "fuse4" - size = 1; - offset = 0x8f0024; - ; - - memory "fuse5" - size = 1; - offset = 0x8f0025; - ; - - memory "lock" - size = 1; - offset = 0x8f0027; - ; - - memory "data" - # SRAM, only used to supply the offset - offset = 0x1000000; - ; -; - -#------------------------------------------------------------ -# ATxmega16A4U -#------------------------------------------------------------ - -part parent ".xmega" - id = "x16a4u"; - desc = "ATxmega16A4U"; - signature = 0x1e 0x94 0x41; - - memory "eeprom" - size = 0x400; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x4000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "apptable" - size = 0x1000; - offset = 0x803000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "boot" - size = 0x1000; - offset = 0x804000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "flash" - size = 0x5000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "usersig" - size = 0x100; - offset = 0x8e0400; - page_size = 0x100; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega16C4 -#------------------------------------------------------------ - -part parent "x16a4u" - id = "x16c4"; - desc = "ATxmega16C4"; - signature = 0x1e 0x95 0x44; -; - -#------------------------------------------------------------ -# ATxmega16D4 -#------------------------------------------------------------ - -part parent "x16a4u" - id = "x16d4"; - desc = "ATxmega16D4"; - signature = 0x1e 0x94 0x42; -; - -#------------------------------------------------------------ -# ATxmega16A4 -#------------------------------------------------------------ - -part parent "x16a4u" - id = "x16a4"; - desc = "ATxmega16A4"; - signature = 0x1e 0x94 0x41; - has_jtag = yes; - - memory "fuse0" - size = 1; - offset = 0x8f0020; - ; -; - -#------------------------------------------------------------ -# ATxmega32A4U -#------------------------------------------------------------ - -part parent ".xmega" - id = "x32a4u"; - desc = "ATxmega32A4U"; - signature = 0x1e 0x95 0x41; - - memory "eeprom" - size = 0x400; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x8000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "apptable" - size = 0x1000; - offset = 0x807000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "boot" - size = 0x1000; - offset = 0x808000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "flash" - size = 0x9000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "usersig" - size = 0x100; - offset = 0x8e0400; - page_size = 0x100; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega32C4 -#------------------------------------------------------------ - -part parent "x32a4u" - id = "x32c4"; - desc = "ATxmega32C4"; - signature = 0x1e 0x94 0x43; -; - -#------------------------------------------------------------ -# ATxmega32D4 -#------------------------------------------------------------ - -part parent "x32a4u" - id = "x32d4"; - desc = "ATxmega32D4"; - signature = 0x1e 0x95 0x42; -; - -#------------------------------------------------------------ -# ATxmega32A4 -#------------------------------------------------------------ - -part parent "x32a4u" - id = "x32a4"; - desc = "ATxmega32A4"; - signature = 0x1e 0x95 0x41; - has_jtag = yes; - - memory "fuse0" - size = 1; - offset = 0x8f0020; - ; -; - -#------------------------------------------------------------ -# ATxmega64A4U -#------------------------------------------------------------ - -part parent ".xmega" - id = "x64a4u"; - desc = "ATxmega64A4U"; - signature = 0x1e 0x96 0x46; - - memory "eeprom" - size = 0x800; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x10000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "apptable" - size = 0x1000; - offset = 0x80f000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "boot" - size = 0x1000; - offset = 0x810000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "flash" - size = 0x11000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "usersig" - size = 0x100; - offset = 0x8e0400; - page_size = 0x100; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega64C3 -#------------------------------------------------------------ - -part parent "x64a4u" - id = "x64c3"; - desc = "ATxmega64C3"; - signature = 0x1e 0x96 0x49; -; - -#------------------------------------------------------------ -# ATxmega64D3 -#------------------------------------------------------------ - -part parent "x64a4u" - id = "x64d3"; - desc = "ATxmega64D3"; - signature = 0x1e 0x96 0x4a; -; - -#------------------------------------------------------------ -# ATxmega64D4 -#------------------------------------------------------------ - -part parent "x64a4u" - id = "x64d4"; - desc = "ATxmega64D4"; - signature = 0x1e 0x96 0x47; -; - -#------------------------------------------------------------ -# ATxmega64A1 -#------------------------------------------------------------ - -part parent "x64a4u" - id = "x64a1"; - desc = "ATxmega64A1"; - signature = 0x1e 0x96 0x4e; - has_jtag = yes; - - memory "fuse0" - size = 1; - offset = 0x8f0020; - ; -; - -#------------------------------------------------------------ -# ATxmega64A1U -#------------------------------------------------------------ - -part parent "x64a1" - id = "x64a1u"; - desc = "ATxmega64A1U"; - signature = 0x1e 0x96 0x4e; -; - -#------------------------------------------------------------ -# ATxmega64A3 -#------------------------------------------------------------ - -part parent "x64a1" - id = "x64a3"; - desc = "ATxmega64A3"; - signature = 0x1e 0x96 0x42; -; - -#------------------------------------------------------------ -# ATxmega64A3U -#------------------------------------------------------------ - -part parent "x64a1" - id = "x64a3u"; - desc = "ATxmega64A3U"; - signature = 0x1e 0x96 0x42; -; - -#------------------------------------------------------------ -# ATxmega64A4 -#------------------------------------------------------------ - -part parent "x64a1" - id = "x64a4"; - desc = "ATxmega64A4"; - signature = 0x1e 0x96 0x46; -; - -#------------------------------------------------------------ -# ATxmega64B1 -#------------------------------------------------------------ - -part parent "x64a1" - id = "x64b1"; - desc = "ATxmega64B1"; - signature = 0x1e 0x96 0x52; -; - -#------------------------------------------------------------ -# ATxmega64B3 -#------------------------------------------------------------ - -part parent "x64a1" - id = "x64b3"; - desc = "ATxmega64B3"; - signature = 0x1e 0x96 0x51; -; - -#------------------------------------------------------------ -# ATxmega128C3 -#------------------------------------------------------------ - -part parent ".xmega" - id = "x128c3"; - desc = "ATxmega128C3"; - signature = 0x1e 0x97 0x52; - - memory "eeprom" - size = 0x800; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x20000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "apptable" - size = 0x2000; - offset = 0x81e000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "boot" - size = 0x2000; - offset = 0x820000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "flash" - size = 0x22000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "usersig" - size = 0x200; - offset = 0x8e0400; - page_size = 0x200; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega128D3 -#------------------------------------------------------------ - -part parent "x128c3" - id = "x128d3"; - desc = "ATxmega128D3"; - signature = 0x1e 0x97 0x48; -; - -#------------------------------------------------------------ -# ATxmega128D4 -#------------------------------------------------------------ - -part parent "x128c3" - id = "x128d4"; - desc = "ATxmega128D4"; - signature = 0x1e 0x97 0x47; -; - -#------------------------------------------------------------ -# ATxmega128A1 -#------------------------------------------------------------ - -part parent "x128c3" - id = "x128a1"; - desc = "ATxmega128A1"; - signature = 0x1e 0x97 0x4c; - has_jtag = yes; - - memory "fuse0" - size = 1; - offset = 0x8f0020; - ; -; - -#------------------------------------------------------------ -# ATxmega128A1 revision D -#------------------------------------------------------------ - -part parent "x128a1" - id = "x128a1d"; - desc = "ATxmega128A1revD"; - signature = 0x1e 0x97 0x41; -; - -#------------------------------------------------------------ -# ATxmega128A1U -#------------------------------------------------------------ - -part parent "x128a1" - id = "x128a1u"; - desc = "ATxmega128A1U"; - signature = 0x1e 0x97 0x4c; -; - -#------------------------------------------------------------ -# ATxmega128A3 -#------------------------------------------------------------ - -part parent "x128a1" - id = "x128a3"; - desc = "ATxmega128A3"; - signature = 0x1e 0x97 0x42; -; - -#------------------------------------------------------------ -# ATxmega128A3U -#------------------------------------------------------------ - -part parent "x128a1" - id = "x128a3u"; - desc = "ATxmega128A3U"; - signature = 0x1e 0x97 0x42; -; - -#------------------------------------------------------------ -# ATxmega128A4 -#------------------------------------------------------------ - -part parent ".xmega" - id = "x128a4"; - desc = "ATxmega128A4"; - signature = 0x1e 0x97 0x46; - has_jtag = yes; - - memory "eeprom" - size = 0x800; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x20000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "apptable" - size = 0x1000; - offset = 0x81f000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "boot" - size = 0x2000; - offset = 0x820000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "flash" - size = 0x22000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "usersig" - size = 0x200; - offset = 0x8e0400; - page_size = 0x200; - readsize = 0x100; - ; - - memory "fuse0" - size = 1; - offset = 0x8f0020; - ; -; - -#------------------------------------------------------------ -# ATxmega128A4U -#------------------------------------------------------------ - -part parent ".xmega" - id = "x128a4u"; - desc = "ATxmega128A4U"; - signature = 0x1e 0x97 0x46; - - memory "eeprom" - size = 0x800; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x20000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "apptable" - size = 0x1000; - offset = 0x81f000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "boot" - size = 0x2000; - offset = 0x820000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "flash" - size = 0x22000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "usersig" - size = 0x100; - offset = 0x8e0400; - page_size = 0x100; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega128B1 -#------------------------------------------------------------ - -part parent ".xmega" - id = "x128b1"; - desc = "ATxmega128B1"; - signature = 0x1e 0x97 0x4d; - has_jtag = yes; - - memory "eeprom" - size = 0x800; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x20000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "apptable" - size = 0x2000; - offset = 0x81e000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "boot" - size = 0x2000; - offset = 0x820000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "flash" - size = 0x22000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "usersig" - size = 0x100; - offset = 0x8e0400; - page_size = 0x100; - readsize = 0x100; - ; - - memory "fuse0" - size = 1; - offset = 0x8f0020; - ; -; - -#------------------------------------------------------------ -# ATxmega128B3 -#------------------------------------------------------------ - -part parent "x128b1" - id = "x128b3"; - desc = "ATxmega128B3"; - signature = 0x1e 0x97 0x4b; -; - -#------------------------------------------------------------ -# ATxmega192C3 -#------------------------------------------------------------ - -part parent ".xmega" - id = "x192c3"; - desc = "ATxmega192C3"; - signature = 0x1e 0x97 0x51; - - memory "eeprom" - size = 0x800; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x30000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "apptable" - size = 0x2000; - offset = 0x82e000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "boot" - size = 0x2000; - offset = 0x830000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "flash" - size = 0x32000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "usersig" - size = 0x200; - offset = 0x8e0400; - page_size = 0x200; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega192D3 -#------------------------------------------------------------ - -part parent "x192c3" - id = "x192d3"; - desc = "ATxmega192D3"; - signature = 0x1e 0x97 0x49; -; - -#------------------------------------------------------------ -# ATxmega192A1 -#------------------------------------------------------------ - -part parent "x192c3" - id = "x192a1"; - desc = "ATxmega192A1"; - signature = 0x1e 0x97 0x4e; - has_jtag = yes; - - memory "fuse0" - size = 1; - offset = 0x8f0020; - ; -; - -#------------------------------------------------------------ -# ATxmega192A3 -#------------------------------------------------------------ - -part parent "x192a1" - id = "x192a3"; - desc = "ATxmega192A3"; - signature = 0x1e 0x97 0x44; -; - -#------------------------------------------------------------ -# ATxmega192A3U -#------------------------------------------------------------ - -part parent "x192a1" - id = "x192a3u"; - desc = "ATxmega192A3U"; - signature = 0x1e 0x97 0x44; -; - -#------------------------------------------------------------ -# ATxmega256C3 -#------------------------------------------------------------ - -part parent ".xmega" - id = "x256c3"; - desc = "ATxmega256C3"; - signature = 0x1e 0x98 0x46; - - memory "eeprom" - size = 0x1000; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x40000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "apptable" - size = 0x2000; - offset = 0x83e000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "boot" - size = 0x2000; - offset = 0x840000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "flash" - size = 0x42000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "usersig" - size = 0x200; - offset = 0x8e0400; - page_size = 0x200; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega256D3 -#------------------------------------------------------------ - -part parent "x256c3" - id = "x256d3"; - desc = "ATxmega256D3"; - signature = 0x1e 0x98 0x44; -; - -#------------------------------------------------------------ -# ATxmega256A1 -#------------------------------------------------------------ - -part parent "x256c3" - id = "x256a1"; - desc = "ATxmega256A1"; - signature = 0x1e 0x98 0x46; - has_jtag = yes; - - memory "fuse0" - size = 1; - offset = 0x8f0020; - ; -; - -#------------------------------------------------------------ -# ATxmega256A3 -#------------------------------------------------------------ - -part parent "x256a1" - id = "x256a3"; - desc = "ATxmega256A3"; - signature = 0x1e 0x98 0x42; -; - -#------------------------------------------------------------ -# ATxmega256A3U -#------------------------------------------------------------ - -part parent "x256a1" - id = "x256a3u"; - desc = "ATxmega256A3U"; - signature = 0x1e 0x98 0x42; -; - -#------------------------------------------------------------ -# ATxmega256A3B -#------------------------------------------------------------ - -part parent "x256a1" - id = "x256a3b"; - desc = "ATxmega256A3B"; - signature = 0x1e 0x98 0x43; -; - -#------------------------------------------------------------ -# ATxmega256A3BU -#------------------------------------------------------------ - -part parent "x256a1" - id = "x256a3bu"; - desc = "ATxmega256A3BU"; - signature = 0x1e 0x98 0x43; -; - -#------------------------------------------------------------ -# ATxmega384C3 -#------------------------------------------------------------ - -part parent ".xmega" - id = "x384c3"; - desc = "ATxmega384C3"; - signature = 0x1e 0x98 0x45; - - memory "eeprom" - size = 0x1000; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x60000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "apptable" - size = 0x2000; - offset = 0x85e000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "boot" - size = 0x2000; - offset = 0x860000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "flash" - size = 0x62000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "usersig" - size = 0x200; - offset = 0x8e0400; - page_size = 0x200; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega384D3 -#------------------------------------------------------------ - -part parent "x384c3" - id = "x384d3"; - desc = "ATxmega384D3"; - signature = 0x1e 0x98 0x47; -; - -#------------------------------------------------------------ -# ATxmega8E5 -#------------------------------------------------------------ - -part parent ".xmega" - id = "x8e5"; - desc = "ATxmega8E5"; - signature = 0x1e 0x93 0x41; - - memory "eeprom" - size = 0x0200; - offset = 0x08c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x2000; - offset = 0x0800000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "apptable" - size = 0x800; - offset = 0x00801800; - page_size = 0x80; - readsize = 0x100; - ; - - memory "boot" - size = 0x800; - offset = 0x00804000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "flash" - size = 0x2800; - offset = 0x0800000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "usersig" - size = 0x80; - offset = 0x8e0400; - page_size = 0x80; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega16E5 -#------------------------------------------------------------ - -part parent ".xmega" - id = "x16e5"; - desc = "ATxmega16E5"; - signature = 0x1e 0x94 0x45; - - memory "eeprom" - size = 0x0200; - offset = 0x08c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x4000; - offset = 0x0800000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "apptable" - size = 0x1000; - offset = 0x00803000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "boot" - size = 0x1000; - offset = 0x00804000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "flash" - size = 0x5000; - offset = 0x0800000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "usersig" - size = 0x80; - offset = 0x8e0400; - page_size = 0x80; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega32E5 -#------------------------------------------------------------ - -part parent ".xmega" - id = "x32e5"; - desc = "ATxmega32E5"; - signature = 0x1e 0x95 0x4c; - - memory "eeprom" - size = 0x0400; - offset = 0x08c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x8000; - offset = 0x0800000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "apptable" - size = 0x1000; - offset = 0x00807000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "boot" - size = 0x1000; - offset = 0x00804000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "flash" - size = 0x9000; - offset = 0x0800000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "usersig" - size = 0x80; - offset = 0x8e0400; - page_size = 0x80; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# AVR32UC3A0512 -#------------------------------------------------------------ - -part - id = "uc3a0512"; - desc = "AT32UC3A0512"; - signature = 0xED 0xC0 0x3F; - has_jtag = yes; - is_avr32 = yes; - - memory "flash" - paged = yes; - page_size = 512; # bytes - readsize = 512; # bytes - num_pages = 1024; # could be set dynamicly - size = 0x00080000; # could be set dynamicly - offset = 0x80000000; - ; -; - -part parent "uc3a0512" - id = "ucr2"; - desc = "deprecated, use 'uc3a0512'"; -; - -#------------------------------------------------------------ -# ATtiny1634. -#------------------------------------------------------------ - -part - id = "t1634"; - desc = "ATtiny1634"; - has_debugwire = yes; - flash_instr = 0xB6, 0x01, 0x11; - eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, - 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, - 0x99, 0xF9, 0xBB, 0xAF; - stk500_devcode = 0x86; - # avr910_devcode = 0x; - signature = 0x1e 0x94 0x12; - pagel = 0xB3; - bs2 = 0xB1; - reset = io; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0E, 0x1E, 0x2E, 0x3E, 0x2E, 0x3E, - 0x4E, 0x5E, 0x4E, 0x5E, 0x6E, 0x7E, 0x6E, 0x7E, - 0x26, 0x36, 0x66, 0x76, 0x2A, 0x3A, 0x6A, 0x7A, - 0x2E, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - memory "eeprom" - paged = no; - page_size = 4; - size = 256; - min_write_delay = 3600; - max_write_delay = 3600; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 5; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 16384; - page_size = 32; - num_pages = 512; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 128; - readsize = 256; - - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x i i i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 1 1 1 1 i i"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; -; - -#------------------------------------------------------------ -# Common values for reduced core tinys (4/5/9/10/20/40) -#------------------------------------------------------------ - -part - id = ".reduced_core_tiny"; - desc = "Common values for reduced core tinys"; - has_tpi = yes; - - memory "signature" - size = 3; - offset = 0x3fc0; - page_size = 16; - ; - - memory "fuse" - size = 1; - offset = 0x3f40; - page_size = 16; - blocksize = 4; - ; - - memory "calibration" - size = 1; - offset = 0x3f80; - page_size = 16; - ; - - memory "lockbits" - size = 1; - offset = 0x3f00; - page_size = 16; - ; -; - -#------------------------------------------------------------ -# ATtiny4 -#------------------------------------------------------------ - -part parent ".reduced_core_tiny" - id = "t4"; - desc = "ATtiny4"; - signature = 0x1e 0x8f 0x0a; - - memory "flash" - size = 512; - offset = 0x4000; - page_size = 16; - blocksize = 128; - ; -; - -#------------------------------------------------------------ -# ATtiny5 -#------------------------------------------------------------ - -part parent "t4" - id = "t5"; - desc = "ATtiny5"; - signature = 0x1e 0x8f 0x09; -; - -#------------------------------------------------------------ -# ATtiny9 -#------------------------------------------------------------ - -part parent ".reduced_core_tiny" - id = "t9"; - desc = "ATtiny9"; - signature = 0x1e 0x90 0x08; - - memory "flash" - size = 1024; - offset = 0x4000; - page_size = 16; - blocksize = 128; - ; -; - -#------------------------------------------------------------ -# ATtiny10 -#------------------------------------------------------------ - -part parent "t9" - id = "t10"; - desc = "ATtiny10"; - signature = 0x1e 0x90 0x03; -; - -#------------------------------------------------------------ -# ATtiny20 -#------------------------------------------------------------ - -part parent ".reduced_core_tiny" - id = "t20"; - desc = "ATtiny20"; - signature = 0x1e 0x91 0x0F; - - memory "flash" - size = 2048; - offset = 0x4000; - page_size = 16; - blocksize = 128; - ; -; - -#------------------------------------------------------------ -# ATtiny40 -#------------------------------------------------------------ - -part parent ".reduced_core_tiny" - id = "t40"; - desc = "ATtiny40"; - signature = 0x1e 0x92 0x0E; - - memory "flash" - size = 4096; - offset = 0x4000; - page_size = 64; - blocksize = 128; - ; -; - -#------------------------------------------------------------ -# ATmega406 -#------------------------------------------------------------ - -part - id = "m406"; - desc = "ATMEGA406"; - has_jtag = yes; - signature = 0x1e 0x95 0x07; - - # STK500 parameters (parallel programming IO lines) - pagel = 0xa7; - bs2 = 0xa0; - serial = no; - parallel = yes; - - # STK500v2 HV programming parameters, from XML - pp_controlstack = 0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f, - 0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f, - 0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b, - 0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - - # JTAG ICE mkII parameters, also from XML files - allowfullpagebitstream = no; - enablepageprogramming = yes; - idr = 0x51; - rampz = 0x00; - spmcr = 0x57; - eecr = 0x3f; - - memory "eeprom" - paged = no; - size = 512; - page_size = 4; - blocksize = 4; - readsize = 4; - num_pages = 128; - ; - - memory "flash" - paged = yes; - size = 40960; - page_size = 128; - blocksize = 128; - readsize = 128; - num_pages = 320; - ; - - memory "hfuse" - size = 1; - ; - - memory "lfuse" - size = 1; - ; - - memory "lockbits" - size = 1; - ; - - memory "signature" - size = 3; - ; -; - - diff --git a/hardware/adafruit/avr/libraries/Wire/README.md b/libraries/Wire/README.md similarity index 100% rename from hardware/adafruit/avr/libraries/Wire/README.md rename to libraries/Wire/README.md diff --git a/hardware/adafruit/avr/libraries/Wire/TinyWireM.cpp b/libraries/Wire/TinyWireM.cpp similarity index 100% rename from hardware/adafruit/avr/libraries/Wire/TinyWireM.cpp rename to libraries/Wire/TinyWireM.cpp diff --git a/hardware/adafruit/avr/libraries/Wire/TinyWireM.h b/libraries/Wire/TinyWireM.h similarity index 100% rename from hardware/adafruit/avr/libraries/Wire/TinyWireM.h rename to libraries/Wire/TinyWireM.h diff --git a/hardware/adafruit/avr/libraries/Wire/USI_TWI_Master.cpp b/libraries/Wire/USI_TWI_Master.cpp similarity index 100% rename from hardware/adafruit/avr/libraries/Wire/USI_TWI_Master.cpp rename to libraries/Wire/USI_TWI_Master.cpp diff --git a/hardware/adafruit/avr/libraries/Wire/USI_TWI_Master.h b/libraries/Wire/USI_TWI_Master.h similarity index 100% rename from hardware/adafruit/avr/libraries/Wire/USI_TWI_Master.h rename to libraries/Wire/USI_TWI_Master.h diff --git a/hardware/adafruit/avr/libraries/Wire/Wire.cpp b/libraries/Wire/Wire.cpp similarity index 100% rename from hardware/adafruit/avr/libraries/Wire/Wire.cpp rename to libraries/Wire/Wire.cpp diff --git a/hardware/adafruit/avr/libraries/Wire/Wire.h b/libraries/Wire/Wire.h similarity index 100% rename from hardware/adafruit/avr/libraries/Wire/Wire.h rename to libraries/Wire/Wire.h diff --git a/hardware/adafruit/avr/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.ino b/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.ino similarity index 100% rename from hardware/adafruit/avr/libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.ino rename to libraries/Wire/examples/SFRRanger_reader/SFRRanger_reader.ino diff --git a/hardware/adafruit/avr/libraries/Wire/examples/digital_potentiometer/digital_potentiometer.ino b/libraries/Wire/examples/digital_potentiometer/digital_potentiometer.ino similarity index 100% rename from hardware/adafruit/avr/libraries/Wire/examples/digital_potentiometer/digital_potentiometer.ino rename to libraries/Wire/examples/digital_potentiometer/digital_potentiometer.ino diff --git a/hardware/adafruit/avr/libraries/Wire/examples/master_reader/master_reader.ino b/libraries/Wire/examples/master_reader/master_reader.ino similarity index 100% rename from hardware/adafruit/avr/libraries/Wire/examples/master_reader/master_reader.ino rename to libraries/Wire/examples/master_reader/master_reader.ino diff --git a/hardware/adafruit/avr/libraries/Wire/examples/master_writer/master_writer.ino b/libraries/Wire/examples/master_writer/master_writer.ino similarity index 100% rename from hardware/adafruit/avr/libraries/Wire/examples/master_writer/master_writer.ino rename to libraries/Wire/examples/master_writer/master_writer.ino diff --git a/hardware/adafruit/avr/libraries/Wire/examples/slave_receiver/slave_receiver.ino b/libraries/Wire/examples/slave_receiver/slave_receiver.ino similarity index 100% rename from hardware/adafruit/avr/libraries/Wire/examples/slave_receiver/slave_receiver.ino rename to libraries/Wire/examples/slave_receiver/slave_receiver.ino diff --git a/hardware/adafruit/avr/libraries/Wire/examples/slave_sender/slave_sender.ino b/libraries/Wire/examples/slave_sender/slave_sender.ino similarity index 100% rename from hardware/adafruit/avr/libraries/Wire/examples/slave_sender/slave_sender.ino rename to libraries/Wire/examples/slave_sender/slave_sender.ino diff --git a/hardware/adafruit/avr/libraries/Wire/keywords.txt b/libraries/Wire/keywords.txt similarity index 100% rename from hardware/adafruit/avr/libraries/Wire/keywords.txt rename to libraries/Wire/keywords.txt diff --git a/hardware/adafruit/avr/libraries/Wire/library.properties b/libraries/Wire/library.properties similarity index 100% rename from hardware/adafruit/avr/libraries/Wire/library.properties rename to libraries/Wire/library.properties diff --git a/hardware/adafruit/avr/libraries/Wire/utility/twi.c b/libraries/Wire/utility/twi.c similarity index 100% rename from hardware/adafruit/avr/libraries/Wire/utility/twi.c rename to libraries/Wire/utility/twi.c diff --git a/hardware/adafruit/avr/libraries/Wire/utility/twi.h b/libraries/Wire/utility/twi.h similarity index 100% rename from hardware/adafruit/avr/libraries/Wire/utility/twi.h rename to libraries/Wire/utility/twi.h diff --git a/hardware/adafruit/avr/platform.txt b/platform.txt similarity index 100% rename from hardware/adafruit/avr/platform.txt rename to platform.txt diff --git a/hardware/adafruit/avr/variants/adafruit32u4/pins_arduino.h b/variants/adafruit32u4/pins_arduino.h similarity index 100% rename from hardware/adafruit/avr/variants/adafruit32u4/pins_arduino.h rename to variants/adafruit32u4/pins_arduino.h diff --git a/hardware/adafruit/avr/variants/bluefruitmicro/pins_arduino.h b/variants/bluefruitmicro/pins_arduino.h similarity index 100% rename from hardware/adafruit/avr/variants/bluefruitmicro/pins_arduino.h rename to variants/bluefruitmicro/pins_arduino.h diff --git a/hardware/adafruit/avr/variants/circuitplay32u4/pins_arduino.h b/variants/circuitplay32u4/pins_arduino.h similarity index 100% rename from hardware/adafruit/avr/variants/circuitplay32u4/pins_arduino.h rename to variants/circuitplay32u4/pins_arduino.h diff --git a/hardware/adafruit/avr/variants/feather32u4/pins_arduino.h b/variants/feather32u4/pins_arduino.h similarity index 100% rename from hardware/adafruit/avr/variants/feather32u4/pins_arduino.h rename to variants/feather32u4/pins_arduino.h diff --git a/hardware/adafruit/avr/variants/flora/pins_arduino.h b/variants/flora/pins_arduino.h similarity index 100% rename from hardware/adafruit/avr/variants/flora/pins_arduino.h rename to variants/flora/pins_arduino.h diff --git a/hardware/adafruit/avr/variants/tiny8/pins_arduino.h b/variants/tiny8/pins_arduino.h similarity index 100% rename from hardware/adafruit/avr/variants/tiny8/pins_arduino.h rename to variants/tiny8/pins_arduino.h From f4e274f512f9def3b537ec98a76313e8229bf769 Mon Sep 17 00:00:00 2001 From: ladyada Date: Thu, 12 May 2016 20:13:12 -0400 Subject: [PATCH 2/2] match up with current leonardo variant (and also add MAGICKEY) --- variants/bluefruitmicro/pins_arduino.h | 145 +++++++++++++++++++-- variants/circuitplay32u4/pins_arduino.h | 141 +++++++++++++++++++-- variants/feather32u4/pins_arduino.h | 143 +++++++++++++++++++-- variants/flora/pins_arduino.h | 160 +++++++++++++++++++++--- 4 files changed, 545 insertions(+), 44 deletions(-) diff --git a/variants/bluefruitmicro/pins_arduino.h b/variants/bluefruitmicro/pins_arduino.h index f948dbe..1da15a9 100644 --- a/variants/bluefruitmicro/pins_arduino.h +++ b/variants/bluefruitmicro/pins_arduino.h @@ -27,18 +27,81 @@ #include +// Workaround for wrong definitions in "iom32u4.h". +// This should be fixed in the AVR toolchain. +#undef UHCON +#undef UHINT +#undef UHIEN +#undef UHADDR +#undef UHFNUM +#undef UHFNUML +#undef UHFNUMH +#undef UHFLEN +#undef UPINRQX +#undef UPINTX +#undef UPNUM +#undef UPRST +#undef UPCONX +#undef UPCFG0X +#undef UPCFG1X +#undef UPSTAX +#undef UPCFG2X +#undef UPIENX +#undef UPDATX +#undef TCCR2A +#undef WGM20 +#undef WGM21 +#undef COM2B0 +#undef COM2B1 +#undef COM2A0 +#undef COM2A1 +#undef TCCR2B +#undef CS20 +#undef CS21 +#undef CS22 +#undef WGM22 +#undef FOC2B +#undef FOC2A +#undef TCNT2 +#undef TCNT2_0 +#undef TCNT2_1 +#undef TCNT2_2 +#undef TCNT2_3 +#undef TCNT2_4 +#undef TCNT2_5 +#undef TCNT2_6 +#undef TCNT2_7 +#undef OCR2A +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 +#undef OCR2B +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 + +#define NUM_DIGITAL_PINS 31 +#define NUM_ANALOG_INPUTS 12 #define TXLED0 0 #define TXLED1 0 #define RXLED0 0 #define RXLED1 0 -#define TX_RX_LED_INIT 0 - -#define NUM_DIGITAL_PINS 24 -#define NUM_ANALOG_INPUTS 12 +#define TX_RX_LED_INIT 0 static const uint8_t SDA = 2; static const uint8_t SCL = 3; +#define LED_BUILTIN 13 // Map SPI port to 'new' pins D14..D17 static const uint8_t SS = 17; @@ -69,7 +132,9 @@ static const uint8_t A11 = 29; // D12 // __AVR_ATmega32U4__ has an unusual mapping of pins to channels extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; #define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) + #define digitalPinHasPWM(p) ((p) == 3 || (p) == 5 || (p) == 6 || (p) == 9 || (p) == 10 || (p) == 11 || (p) == 13) + #define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT))))) #ifdef ARDUINO_MAIN @@ -110,8 +175,8 @@ extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; // MOSI D16 PB2 MOSI,PCINT2 // SS D17 PB0 RXLED,SS/PCINT0 // -// TXLED PD5 -// RXLED PB0 +// TXLED D30 PD5 +// RXLED PB0 // HWB PE2 HWB // these arrays map port names (e.g. port B) to the @@ -147,7 +212,7 @@ const uint16_t PROGMEM port_to_input_PGM[] = { (uint16_t) &PINF, }; -const uint8_t PROGMEM digital_pin_to_port_PGM[30] = { +const uint8_t PROGMEM digital_pin_to_port_PGM[] = { PD, // D0 - PD2 PD, // D1 - PD3 PD, // D2 - PD1 @@ -182,9 +247,10 @@ const uint8_t PROGMEM digital_pin_to_port_PGM[30] = { PB, // D27 / D9 - A9 - PB5 PB, // D28 / D10 - A10 - PB6 PD, // D29 / D12 - A11 - PD6 + PD, // D30 - PD5 }; -const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[30] = { +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { _BV(2), // D0 - PD2 _BV(3), // D1 - PD3 _BV(1), // D2 - PD1 @@ -219,9 +285,10 @@ const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[30] = { _BV(5), // D27 / D9 - A9 - PB5 _BV(6), // D28 / D10 - A10 - PB6 _BV(6), // D29 / D12 - A11 - PD6 + _BV(5), // D30 - PD5 }; -const uint8_t PROGMEM digital_pin_to_timer_PGM[16] = { +const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, @@ -241,9 +308,25 @@ const uint8_t PROGMEM digital_pin_to_timer_PGM[16] = { NOT_ON_TIMER, NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, }; -const uint8_t PROGMEM analog_pin_to_channel_PGM[12] = { +const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { 7, // A0 PF7 ADC7 6, // A1 PF6 ADC6 5, // A2 PF5 ADC5 @@ -259,4 +342,46 @@ const uint8_t PROGMEM analog_pin_to_channel_PGM[12] = { }; #endif /* ARDUINO_MAIN */ + +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_USBVIRTUAL Serial +#define SERIAL_PORT_HARDWARE Serial1 +#define SERIAL_PORT_HARDWARE_OPEN Serial1 + +// Alias SerialUSB to Serial +#define SerialUSB SERIAL_PORT_USBVIRTUAL + +// Bootloader related fields +// Old Caterina bootloader places the MAGIC key into unsafe RAM locations (it can be rewritten +// by the running sketch before to actual reboot). +// Newer bootloaders, recognizable by the LUFA "signature" at the end of the flash, can handle both +// the usafe and the safe location. Check once (in USBCore.cpp) if the bootloader in new, then set the global +// _updatedLUFAbootloader variable to true/false and place the magic key consequently +#ifndef MAGIC_KEY +#define MAGIC_KEY 0x7777 +#endif + +#ifndef MAGIC_KEY_POS +#define MAGIC_KEY_POS 0x0800 +#endif + +#ifndef NEW_LUFA_SIGNATURE +#define NEW_LUFA_SIGNATURE 0xDCFB +#endif + #endif /* Pins_Arduino_h */ diff --git a/variants/circuitplay32u4/pins_arduino.h b/variants/circuitplay32u4/pins_arduino.h index a493f8b..1da15a9 100644 --- a/variants/circuitplay32u4/pins_arduino.h +++ b/variants/circuitplay32u4/pins_arduino.h @@ -27,15 +27,81 @@ #include +// Workaround for wrong definitions in "iom32u4.h". +// This should be fixed in the AVR toolchain. +#undef UHCON +#undef UHINT +#undef UHIEN +#undef UHADDR +#undef UHFNUM +#undef UHFNUML +#undef UHFNUMH +#undef UHFLEN +#undef UPINRQX +#undef UPINTX +#undef UPNUM +#undef UPRST +#undef UPCONX +#undef UPCFG0X +#undef UPCFG1X +#undef UPSTAX +#undef UPCFG2X +#undef UPIENX +#undef UPDATX +#undef TCCR2A +#undef WGM20 +#undef WGM21 +#undef COM2B0 +#undef COM2B1 +#undef COM2A0 +#undef COM2A1 +#undef TCCR2B +#undef CS20 +#undef CS21 +#undef CS22 +#undef WGM22 +#undef FOC2B +#undef FOC2A +#undef TCNT2 +#undef TCNT2_0 +#undef TCNT2_1 +#undef TCNT2_2 +#undef TCNT2_3 +#undef TCNT2_4 +#undef TCNT2_5 +#undef TCNT2_6 +#undef TCNT2_7 +#undef OCR2A +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 +#undef OCR2B +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 + +#define NUM_DIGITAL_PINS 31 +#define NUM_ANALOG_INPUTS 12 #define TXLED0 0 #define TXLED1 0 #define RXLED0 0 #define RXLED1 0 -#define TX_RX_LED_INIT 0 +#define TX_RX_LED_INIT 0 static const uint8_t SDA = 2; static const uint8_t SCL = 3; +#define LED_BUILTIN 13 // Map SPI port to 'new' pins D14..D17 static const uint8_t SS = 17; @@ -67,9 +133,8 @@ static const uint8_t A11 = 29; // D12 extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; #define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) -#define NUM_DIGITAL_PINS 31 -#define NUM_ANALOG_INPUTS 12 #define digitalPinHasPWM(p) ((p) == 3 || (p) == 5 || (p) == 6 || (p) == 9 || (p) == 10 || (p) == 11 || (p) == 13) + #define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT))))) #ifdef ARDUINO_MAIN @@ -147,7 +212,7 @@ const uint16_t PROGMEM port_to_input_PGM[] = { (uint16_t) &PINF, }; -const uint8_t PROGMEM digital_pin_to_port_PGM[31] = { +const uint8_t PROGMEM digital_pin_to_port_PGM[] = { PD, // D0 - PD2 PD, // D1 - PD3 PD, // D2 - PD1 @@ -182,11 +247,10 @@ const uint8_t PROGMEM digital_pin_to_port_PGM[31] = { PB, // D27 / D9 - A9 - PB5 PB, // D28 / D10 - A10 - PB6 PD, // D29 / D12 - A11 - PD6 - PD, // D30 - PD5 }; -const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[31] = { +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { _BV(2), // D0 - PD2 _BV(3), // D1 - PD3 _BV(1), // D2 - PD1 @@ -221,11 +285,10 @@ const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[31] = { _BV(5), // D27 / D9 - A9 - PB5 _BV(6), // D28 / D10 - A10 - PB6 _BV(6), // D29 / D12 - A11 - PD6 - - _BV(5), // D30 - PD5 (TXLED) + _BV(5), // D30 - PD5 }; -const uint8_t PROGMEM digital_pin_to_timer_PGM[16] = { +const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, @@ -245,9 +308,25 @@ const uint8_t PROGMEM digital_pin_to_timer_PGM[16] = { NOT_ON_TIMER, NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, }; -const uint8_t PROGMEM analog_pin_to_channel_PGM[12] = { +const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { 7, // A0 PF7 ADC7 6, // A1 PF6 ADC6 5, // A2 PF5 ADC5 @@ -263,4 +342,46 @@ const uint8_t PROGMEM analog_pin_to_channel_PGM[12] = { }; #endif /* ARDUINO_MAIN */ + +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_USBVIRTUAL Serial +#define SERIAL_PORT_HARDWARE Serial1 +#define SERIAL_PORT_HARDWARE_OPEN Serial1 + +// Alias SerialUSB to Serial +#define SerialUSB SERIAL_PORT_USBVIRTUAL + +// Bootloader related fields +// Old Caterina bootloader places the MAGIC key into unsafe RAM locations (it can be rewritten +// by the running sketch before to actual reboot). +// Newer bootloaders, recognizable by the LUFA "signature" at the end of the flash, can handle both +// the usafe and the safe location. Check once (in USBCore.cpp) if the bootloader in new, then set the global +// _updatedLUFAbootloader variable to true/false and place the magic key consequently +#ifndef MAGIC_KEY +#define MAGIC_KEY 0x7777 +#endif + +#ifndef MAGIC_KEY_POS +#define MAGIC_KEY_POS 0x0800 +#endif + +#ifndef NEW_LUFA_SIGNATURE +#define NEW_LUFA_SIGNATURE 0xDCFB +#endif + #endif /* Pins_Arduino_h */ diff --git a/variants/feather32u4/pins_arduino.h b/variants/feather32u4/pins_arduino.h index 1437349..1da15a9 100644 --- a/variants/feather32u4/pins_arduino.h +++ b/variants/feather32u4/pins_arduino.h @@ -27,15 +27,81 @@ #include +// Workaround for wrong definitions in "iom32u4.h". +// This should be fixed in the AVR toolchain. +#undef UHCON +#undef UHINT +#undef UHIEN +#undef UHADDR +#undef UHFNUM +#undef UHFNUML +#undef UHFNUMH +#undef UHFLEN +#undef UPINRQX +#undef UPINTX +#undef UPNUM +#undef UPRST +#undef UPCONX +#undef UPCFG0X +#undef UPCFG1X +#undef UPSTAX +#undef UPCFG2X +#undef UPIENX +#undef UPDATX +#undef TCCR2A +#undef WGM20 +#undef WGM21 +#undef COM2B0 +#undef COM2B1 +#undef COM2A0 +#undef COM2A1 +#undef TCCR2B +#undef CS20 +#undef CS21 +#undef CS22 +#undef WGM22 +#undef FOC2B +#undef FOC2A +#undef TCNT2 +#undef TCNT2_0 +#undef TCNT2_1 +#undef TCNT2_2 +#undef TCNT2_3 +#undef TCNT2_4 +#undef TCNT2_5 +#undef TCNT2_6 +#undef TCNT2_7 +#undef OCR2A +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 +#undef OCR2B +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 + +#define NUM_DIGITAL_PINS 31 +#define NUM_ANALOG_INPUTS 12 #define TXLED0 0 #define TXLED1 0 #define RXLED0 0 #define RXLED1 0 -#define TX_RX_LED_INIT 0 +#define TX_RX_LED_INIT 0 static const uint8_t SDA = 2; static const uint8_t SCL = 3; +#define LED_BUILTIN 13 // Map SPI port to 'new' pins D14..D17 static const uint8_t SS = 17; @@ -67,9 +133,8 @@ static const uint8_t A11 = 29; // D12 extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; #define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) -#define NUM_DIGITAL_PINS 24 -#define NUM_ANALOG_INPUTS 12 #define digitalPinHasPWM(p) ((p) == 3 || (p) == 5 || (p) == 6 || (p) == 9 || (p) == 10 || (p) == 11 || (p) == 13) + #define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT))))) #ifdef ARDUINO_MAIN @@ -110,8 +175,8 @@ extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; // MOSI D16 PB2 MOSI,PCINT2 // SS D17 PB0 RXLED,SS/PCINT0 // -// TXLED PD5 -// RXLED PB0 +// TXLED D30 PD5 +// RXLED PB0 // HWB PE2 HWB // these arrays map port names (e.g. port B) to the @@ -147,7 +212,7 @@ const uint16_t PROGMEM port_to_input_PGM[] = { (uint16_t) &PINF, }; -const uint8_t PROGMEM digital_pin_to_port_PGM[30] = { +const uint8_t PROGMEM digital_pin_to_port_PGM[] = { PD, // D0 - PD2 PD, // D1 - PD3 PD, // D2 - PD1 @@ -182,9 +247,10 @@ const uint8_t PROGMEM digital_pin_to_port_PGM[30] = { PB, // D27 / D9 - A9 - PB5 PB, // D28 / D10 - A10 - PB6 PD, // D29 / D12 - A11 - PD6 + PD, // D30 - PD5 }; -const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[30] = { +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { _BV(2), // D0 - PD2 _BV(3), // D1 - PD3 _BV(1), // D2 - PD1 @@ -219,9 +285,10 @@ const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[30] = { _BV(5), // D27 / D9 - A9 - PB5 _BV(6), // D28 / D10 - A10 - PB6 _BV(6), // D29 / D12 - A11 - PD6 + _BV(5), // D30 - PD5 }; -const uint8_t PROGMEM digital_pin_to_timer_PGM[16] = { +const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, @@ -241,9 +308,25 @@ const uint8_t PROGMEM digital_pin_to_timer_PGM[16] = { NOT_ON_TIMER, NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, }; -const uint8_t PROGMEM analog_pin_to_channel_PGM[12] = { +const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { 7, // A0 PF7 ADC7 6, // A1 PF6 ADC6 5, // A2 PF5 ADC5 @@ -259,4 +342,46 @@ const uint8_t PROGMEM analog_pin_to_channel_PGM[12] = { }; #endif /* ARDUINO_MAIN */ + +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_USBVIRTUAL Serial +#define SERIAL_PORT_HARDWARE Serial1 +#define SERIAL_PORT_HARDWARE_OPEN Serial1 + +// Alias SerialUSB to Serial +#define SerialUSB SERIAL_PORT_USBVIRTUAL + +// Bootloader related fields +// Old Caterina bootloader places the MAGIC key into unsafe RAM locations (it can be rewritten +// by the running sketch before to actual reboot). +// Newer bootloaders, recognizable by the LUFA "signature" at the end of the flash, can handle both +// the usafe and the safe location. Check once (in USBCore.cpp) if the bootloader in new, then set the global +// _updatedLUFAbootloader variable to true/false and place the magic key consequently +#ifndef MAGIC_KEY +#define MAGIC_KEY 0x7777 +#endif + +#ifndef MAGIC_KEY_POS +#define MAGIC_KEY_POS 0x0800 +#endif + +#ifndef NEW_LUFA_SIGNATURE +#define NEW_LUFA_SIGNATURE 0xDCFB +#endif + #endif /* Pins_Arduino_h */ diff --git a/variants/flora/pins_arduino.h b/variants/flora/pins_arduino.h index ee074d8..7a2583b 100644 --- a/variants/flora/pins_arduino.h +++ b/variants/flora/pins_arduino.h @@ -27,15 +27,83 @@ #include +// Workaround for wrong definitions in "iom32u4.h". +// This should be fixed in the AVR toolchain. +#undef UHCON +#undef UHINT +#undef UHIEN +#undef UHADDR +#undef UHFNUM +#undef UHFNUML +#undef UHFNUMH +#undef UHFLEN +#undef UPINRQX +#undef UPINTX +#undef UPNUM +#undef UPRST +#undef UPCONX +#undef UPCFG0X +#undef UPCFG1X +#undef UPSTAX +#undef UPCFG2X +#undef UPIENX +#undef UPDATX +#undef TCCR2A +#undef WGM20 +#undef WGM21 +#undef COM2B0 +#undef COM2B1 +#undef COM2A0 +#undef COM2A1 +#undef TCCR2B +#undef CS20 +#undef CS21 +#undef CS22 +#undef WGM22 +#undef FOC2B +#undef FOC2A +#undef TCNT2 +#undef TCNT2_0 +#undef TCNT2_1 +#undef TCNT2_2 +#undef TCNT2_3 +#undef TCNT2_4 +#undef TCNT2_5 +#undef TCNT2_6 +#undef TCNT2_7 +#undef OCR2A +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 +#undef OCR2B +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 +#define NUM_DIGITAL_PINS 31 +#define NUM_ANALOG_INPUTS 12 + +#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0) #define TXLED0 PORTD &= ~(1<<5) #define TXLED1 PORTD |= (1<<5) #define RXLED0 PORTB &= ~(1<<0) #define RXLED1 PORTB |= (1<<0) -#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0), TXLED0, RXLED0 static const uint8_t SDA = 2; static const uint8_t SCL = 3; +#define LED_BUILTIN 13 +#define LED_BUILTIN_RX 17 +#define LED_BUILTIN_TX 30 // Map SPI port to 'new' pins D14..D17 static const uint8_t SS = 17; @@ -66,7 +134,9 @@ static const uint8_t A11 = 29; // D12 // __AVR_ATmega32U4__ has an unusual mapping of pins to channels extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; #define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) + #define digitalPinHasPWM(p) ((p) == 3 || (p) == 5 || (p) == 6 || (p) == 9 || (p) == 10 || (p) == 11 || (p) == 13) + #define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT))))) #ifdef ARDUINO_MAIN @@ -107,8 +177,8 @@ extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; // MOSI D16 PB2 MOSI,PCINT2 // SS D17 PB0 RXLED,SS/PCINT0 // -// TXLED PD5 -// RXLED PB0 +// TXLED D30 PD5 XCK1 +// RXLED D17 PB0 // HWB PE2 HWB // these arrays map port names (e.g. port B) to the @@ -144,7 +214,7 @@ const uint16_t PROGMEM port_to_input_PGM[] = { (uint16_t) &PINF, }; -const uint8_t PROGMEM digital_pin_to_port_PGM[30] = { +const uint8_t PROGMEM digital_pin_to_port_PGM[] = { PD, // D0 - PD2 PD, // D1 - PD3 PD, // D2 - PD1 @@ -153,35 +223,36 @@ const uint8_t PROGMEM digital_pin_to_port_PGM[30] = { PC, // D5 - PC6 PD, // D6 - PD7 PE, // D7 - PE6 - + PB, // D8 - PB4 PB, // D9 - PB5 PB, // D10 - PB6 PB, // D11 - PB7 PD, // D12 - PD6 PC, // D13 - PC7 - + PB, // D14 - MISO - PB3 PB, // D15 - SCK - PB1 PB, // D16 - MOSI - PB2 PB, // D17 - SS - PB0 - + PF, // D18 - A0 - PF7 PF, // D19 - A1 - PF6 PF, // D20 - A2 - PF5 PF, // D21 - A3 - PF4 PF, // D22 - A4 - PF1 PF, // D23 - A5 - PF0 - + PD, // D24 / D4 - A6 - PD4 PD, // D25 / D6 - A7 - PD7 PB, // D26 / D8 - A8 - PB4 PB, // D27 / D9 - A9 - PB5 PB, // D28 / D10 - A10 - PB6 PD, // D29 / D12 - A11 - PD6 + PD, // D30 / TX Led - PD5 }; -const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[30] = { +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { _BV(2), // D0 - PD2 _BV(3), // D1 - PD3 _BV(1), // D2 - PD1 @@ -190,35 +261,36 @@ const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[30] = { _BV(6), // D5 - PC6 _BV(7), // D6 - PD7 _BV(6), // D7 - PE6 - + _BV(4), // D8 - PB4 _BV(5), // D9 - PB5 _BV(6), // D10 - PB6 _BV(7), // D11 - PB7 _BV(6), // D12 - PD6 _BV(7), // D13 - PC7 - + _BV(3), // D14 - MISO - PB3 _BV(1), // D15 - SCK - PB1 _BV(2), // D16 - MOSI - PB2 _BV(0), // D17 - SS - PB0 - + _BV(7), // D18 - A0 - PF7 _BV(6), // D19 - A1 - PF6 _BV(5), // D20 - A2 - PF5 _BV(4), // D21 - A3 - PF4 _BV(1), // D22 - A4 - PF1 _BV(0), // D23 - A5 - PF0 - + _BV(4), // D24 / D4 - A6 - PD4 _BV(7), // D25 / D6 - A7 - PD7 _BV(4), // D26 / D8 - A8 - PB4 _BV(5), // D27 / D9 - A9 - PB5 _BV(6), // D28 / D10 - A10 - PB6 _BV(6), // D29 / D12 - A11 - PD6 + _BV(5), // D30 / TX Led - PD5 }; -const uint8_t PROGMEM digital_pin_to_timer_PGM[16] = { +const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, @@ -238,9 +310,25 @@ const uint8_t PROGMEM digital_pin_to_timer_PGM[16] = { NOT_ON_TIMER, NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, }; -const uint8_t PROGMEM analog_pin_to_channel_PGM[12] = { +const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { 7, // A0 PF7 ADC7 6, // A1 PF6 ADC6 5, // A2 PF5 ADC5 @@ -256,4 +344,46 @@ const uint8_t PROGMEM analog_pin_to_channel_PGM[12] = { }; #endif /* ARDUINO_MAIN */ + +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_USBVIRTUAL Serial +#define SERIAL_PORT_HARDWARE Serial1 +#define SERIAL_PORT_HARDWARE_OPEN Serial1 + +// Alias SerialUSB to Serial +#define SerialUSB SERIAL_PORT_USBVIRTUAL + +// Bootloader related fields +// Old Caterina bootloader places the MAGIC key into unsafe RAM locations (it can be rewritten +// by the running sketch before to actual reboot). +// Newer bootloaders, recognizable by the LUFA "signature" at the end of the flash, can handle both +// the usafe and the safe location. Check once (in USBCore.cpp) if the bootloader in new, then set the global +// _updatedLUFAbootloader variable to true/false and place the magic key consequently +#ifndef MAGIC_KEY +#define MAGIC_KEY 0x7777 +#endif + +#ifndef MAGIC_KEY_POS +#define MAGIC_KEY_POS 0x0800 +#endif + +#ifndef NEW_LUFA_SIGNATURE +#define NEW_LUFA_SIGNATURE 0xDCFB +#endif + #endif /* Pins_Arduino_h */