jepler/Adafruit_CircuitPython_AVRprog
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

updated comments, linted mega2560 example

Browse source
This commit is contained in:
ladyada 2018-01-07 18:04:49 -05:00
parent 2bef50c500
commit c51a352272
2 changed files with 31 additions and 13 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

26
adafruit_avrprog.py
View file

@ -49,9 +49,9 @@ class AVRprog:
def init(self, spi_bus, rst_pin): def init(self, spi_bus, rst_pin):
""" """
Initialize the programmer with SPI pins that will be used to Initialize the programmer with an SPI port that will be used to
communicate with the chip. Currently only hardware-SPI pins are communicate with the chip. Make sure your SPI supports 'write_readinto'
supported! Also pass in a reset pin that will be used to get into programming mode
""" """
self._spi = spi_bus self._spi = spi_bus
self._rst = DigitalInOut(rst_pin) self._rst = DigitalInOut(rst_pin)
@ -323,13 +323,19 @@ class AVRprog:
def read_hex_page(file_state, page_addr, page_size, page_buffer): def read_hex_page(file_state, page_addr, page_size, page_buffer):
""" """
Helper function that does the Intel Hex parsing. Given an open file Helper function that does the Intel Hex parsing. Takes in a dictionary
'hexfile' and our desired buffer address start (page_addr), size that contains the file 'state'. The dictionary should have file_state['f']
(page_size) and an allocated bytearray. This function will try to be the file stream object (returned by open), the file_state['line'] which
read the file and fill the page_buffer. If the next line has data tracks the line number of the file for better debug messages. This function
that is beyond the size of the page_address, it will return without will update 'line' as it reads lines. It will set 'eof' when the file has
changing the buffer, so pre-fill it with 0xFF (for sparsely-defined completed reading. It will also store the 'extended address' state in
HEX files. file_state['ext_addr']
In addition to the file, it takes the desired buffer address start
(page_addr), size (page_size) and an allocated bytearray.
This function will try to read the file and fill the page_buffer.
If the next line has data that is beyond the size of the page_address,
it will return without changing the buffer, so pre-fill it with 0xFF
before calling, for sparsely-defined HEX files.
Returns False if the file has no more data to read. Returns True if Returns False if the file has no more data to read. Returns True if
we've done the best job we can with filling the buffer and the next we've done the best job we can with filling the buffer and the next
line does not contain any more data we can use. line does not contain any more data we can use.

18
examples/program_mega2560.py
View file

@ -1,4 +1,13 @@
# Mega STK500 Bootloader programming example """
Arduino Mega 2560 programming example, be sure you have the Mega/2560 wired up so:
Mega Ground to CircuitPython GND
Mega 5V to CircuitPythong USB or make sure the Trinket is powered by USB
Pin 52 -> CircuitPython SCK
Pin 50 -> CircuitPython MISO - Note this is backwards from what you expect
Pin 51 -> CircuitPython MOSI - Note this is backwards from what you expect
RESET -> CircuitPython D5 (or change the init() below to change it)
Drag "stk500boot_v2_mega2560.hex" onto the CircuitPython disk drive, then open REPL
"""
import board import board
import busio import busio
@ -15,13 +24,16 @@ atmega2560['flash_size'] = 262144
atmega2560['page_size'] = 256 atmega2560['page_size'] = 256
atmega2560['fuse_mask'] = (0xFF, 0xFF, 0x07, 0x3F) atmega2560['fuse_mask'] = (0xFF, 0xFF, 0x07, 0x3F)
# Helper to print out errors for us
def error(err): def error(err):
""" Helper to print out errors for us and then halt """
print("ERROR: "+err) print("ERROR: "+err)
avrprog.end() avrprog.end()
while True: while True:
pass pass
while input("Ready to GO, type 'G' here to start> ") != 'G':
pass
if not avrprog.verify_sig(atmega2560, verbose=True): if not avrprog.verify_sig(atmega2560, verbose=True):
error("Signature read failure") error("Signature read failure")
print("Found", atmega2560['name']) print("Found", atmega2560['name'])
@ -37,7 +49,7 @@ print("Programming flash from file")
avrprog.program_file(atmega2560, "stk500boot_v2_mega2560.hex", verbose=True, verify=True) avrprog.program_file(atmega2560, "stk500boot_v2_mega2560.hex", verbose=True, verify=True)
avrprog.write_fuses(atmega2560, lock=0x0F) avrprog.write_fuses(atmega2560, lock=0x0F)
if not avrprog.verify_fuses(atmega2560,lock=0x0F): if not avrprog.verify_fuses(atmega2560, lock=0x0F):
error("Failure verifying fuses!") error("Failure verifying fuses!")
print("Done!") print("Done!")