import json
import board
import busio
from digitalio import DigitalInOut
import neopixel
from adafruit_esp32spi import adafruit_esp32spi
from adafruit_esp32spi import adafruit_esp32spi_wifimanager
import adafruit_esp32spi.adafruit_esp32spi_socket as socket
from adafruit_minimqtt import MQTT
from adafruit_aws_iot import MQTT_CLIENT

### WiFi ###

# Get wifi details and more from a secrets.py file
try:
    from secrets import secrets
except ImportError:
    print("WiFi secrets are kept in secrets.py, please add them there!")
    raise

# Get device certificate
try:
    with open("aws_cert.pem.crt", "rb") as f:
        DEVICE_CERT = f.read()
except ImportError:
    print("Certificate (aws_cert.pem.crt) not found on CIRCUITPY filesystem.")
    raise

# Get device private key
try:
    with open("private.pem.key", "rb") as f:
        DEVICE_KEY = f.read()
except ImportError:
    print("Certificate (private.pem.key) not found on CIRCUITPY filesystem.")
    raise

# If you are using a board with pre-defined ESP32 Pins:
esp32_cs = DigitalInOut(board.ESP_CS)
esp32_ready = DigitalInOut(board.ESP_BUSY)
esp32_reset = DigitalInOut(board.ESP_RESET)

# If you have an externally connected ESP32:
# esp32_cs = DigitalInOut(board.D9)
# esp32_ready = DigitalInOut(board.D10)
# esp32_reset = DigitalInOut(board.D5)

spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)

# Verify nina-fw version >= 1.4.0
assert int(bytes(esp.firmware_version).decode("utf-8")[2]) >= 4, "Please update nina-fw to >=1.4.0."

# Use below for Most Boards
status_light = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2) # Uncomment for Most Boards
# Uncomment below for ItsyBitsy M4
# status_light = dotstar.DotStar(board.APA102_SCK, board.APA102_MOSI, 1, brightness=0.2)
# Uncomment below for an externally defined RGB LED
# import adafruit_rgbled
# from adafruit_esp32spi import PWMOut
# RED_LED = PWMOut.PWMOut(esp, 26)
# GREEN_LED = PWMOut.PWMOut(esp, 27)
# BLUE_LED = PWMOut.PWMOut(esp, 25)
# status_light = adafruit_rgbled.RGBLED(RED_LED, BLUE_LED, GREEN_LED)
wifi = adafruit_esp32spi_wifimanager.ESPSPI_WiFiManager(esp, secrets, status_light)

### Code ###

topic = "circuitpython/aws"

# Define callback methods which are called when events occur
# pylint: disable=unused-argument, redefined-outer-name
def connect(client, userdata, flags, rc):
    # This function will be called when the client is connected
    # successfully to the broker.
    print('Connected to MQTT Broker!')
    print('Flags: {0}\n RC: {1}'.format(flags, rc))

    # Subscribe to topic circuitpython/aws
    print("Subscribing to topic {}".format(topic))
    aws_iot.subscribe(topic)

def disconnect(client, userdata, rc):
    # This method is called when the client disconnects
    # from the broker.
    print('Disconnected from MQTT Broker!')

def subscribe(client, userdata, topic, granted_qos):
    # This method is called when the client subscribes to a new topic.
    print('Subscribed to {0} with QOS level {1}'.format(topic, granted_qos))

    # Create a json-formatted message
    message = {"message": "Hello from AWS IoT CircuitPython"}
    # Publish message to topic
    aws_iot.publish(topic, json.dumps(message))

def unsubscribe(client, userdata, topic, pid):
    # This method is called when the client unsubscribes from a topic.
    print('Unsubscribed from {0} with PID {1}'.format(topic, pid))

def publish(client, userdata, topic, pid):
    # This method is called when the client publishes data to a topic.
    print('Published to {0} with PID {1}'.format(topic, pid))

def message(client, topic, msg):
    # This method is called when the client receives data from a topic.
    print("Message from {}: {}".format(topic, msg))


# Set AWS Device Certificate
esp.set_certificate(DEVICE_CERT)

# Set AWS RSA Private Key
esp.set_private_key(DEVICE_KEY)

# Connect to WiFi
print("Connecting to WiFi...")
wifi.connect()
print("Connected!")

# Set up a new MiniMQTT Client
client =  MQTT(socket,
               broker = secrets['broker'],
               client_id = secrets['client_id'],
               network_manager = wifi,
               log=True)

# Initialize AWS IoT MQTT API Client
aws_iot = MQTT_CLIENT(client)

# Connect callback handlers to AWS IoT MQTT Client
aws_iot.on_connect = connect
aws_iot.on_disconnect = disconnect
aws_iot.on_subscribe = subscribe
aws_iot.on_unsubscribe = unsubscribe
aws_iot.on_publish = publish
aws_iot.on_message = message

print('Attempting to connect to %s'%client.broker)
aws_iot.connect()

# Pump the message loop forever, all events
# are handled in their callback handlers
# while True:
#   aws_iot.loop()

# Attempt to loop forever and handle network interface
aws_iot.loop_forever()