initial checkin, not working because it relies on register

2019-05-24 15:07:04 -07:00 · 2019-05-24 15:07:04 -07:00 · 14613d6d63
commit 14613d6d63
1 changed files with 250 additions and 0 deletions
--- a/adafruit_bd3491fs.py
+++ b/adafruit_bd3491fs.py
@ -0,0 +1,250 @@
+# The MIT License (MIT)
+#
+# Copyright (c) 2019 Bryan Siepert for Adafruit Industries
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+"""
+`adafruit_bd3491fs`
+================================================================================
+
+A driver for the Rohm BD3491FS audio processor
+
+* Author(s): Bryan Siepert
+
+Implementation Notes
+--------------------
+
+**Hardware:**
+
+**Software and Dependencies:**
+ * Adafruit CircuitPython firmware for the supported boards:
+    https://github.com/adafruit/circuitpython/releases
+ * Adafruit's Bus Device library: https://github.com/adafruit/Adafruit_CircuitPython_BusDevice
+ * Adafruit's Register library: https://github.com/adafruit/Adafruit_CircuitPython_Register
+
+"""
+
+# imports
+
+__version__ = "0.0.0-auto.0"
+__repo__ = "https://github.com/adafruit/Adafruit_CircuitPython_BD3491FS.git"
+
+from micropython import const
+import adafruit_bus_device.i2c_device as i2cdevice
+from adafruit_register.i2c_struct import UnaryStruct
+from adafruit_register.i2c_bits import RWBits, ROBits
+from adafruit_register.i2c_bit import RWBit
+# pylint: disable=bad-whitespace
+_INPUT_SELECTOR	 = const(0x04)
+_INPUT_GAIN      = const(0x06)
+_VOLUME_GAIN_CH1 = const(0x21)
+_VOLUME_GAIN_CH2 = const(0x22)
+_BASS_GAIN       = const(0x51)
+_TREBLE_GAIN     = const(0x57)
+_SURROUND_GAIN        = const(0x78)
+_TEST_MODE       = const(0xF0)
+_SYSTEM_RESET    = const(0xFE)
+# pylint: enable=bad-whitespace
+
+class Input: # pylint: disable=too-few-public-methods
+    """Options for ``active_input``
+
+        +---------------+------------------+
+        | ``Input``       | Input Pair       |
+        +===============+==================+
+        | ``Input.A``     | Inputs A1 and A2 |
+        +-----------------+------------------+
+        | ``Input.B``     | Inputs B1 and B2 |
+        +-----------------+------------------+
+        | ``Input.C``     | Inputs C1 and C2 |
+        +-----------------+------------------+
+        | ``Input.D``     | Inputs D1 and D2 |
+        +-----------------+------------------+
+        | ``Input.E``     | Inputs E1 and E2 |
+        +-----------------+------------------+
+        | ``Input.F``     | Inputs F1 and F2 |
+        +-----------------+------------------+
+        | ``Input.SHORT`` | Short inputs     |
+        +-----------------+------------------+
+        | ``Input.MUTE``  | Mute all         |
+        +-----------------+------------------+
+
+    """
+    A = const(0x00)
+    B = const(0x01)
+    C = const(0x02)
+    D = const(0x03)
+    E = const(0x04)
+    F = const(0x06)
+    SHORT = const(0x05)
+    MUTE = const(0x07)
+class InputGain: # pylint: disable=too-few-public-methods
+    """Options for ``active_input``
+
+        +---------------+------------------+
+        | ``Input``       | Input Pair       |
+        +===============+==================+
+        | ``Input.A``     | Inputs A1 and A2 |
+        +-----------------+------------------+
+        | ``Input.B``     | Inputs B1 and B2 |
+        +-----------------+------------------+
+        | ``Input.C``     | Inputs C1 and C2 |
+        +-----------------+------------------+
+        | ``Input.D``     | Inputs D1 and D2 |
+        +-----------------+------------------+
+        | ``Input.E``     | Inputs E1 and E2 |
+        +-----------------+------------------+
+        | ``Input.F``     | Inputs F1 and F2 |
+        +-----------------+------------------+
+        | ``Input.SHORT`` | Short inputs     |
+        +-----------------+------------------+
+        | ``Input.MUTE``  | Mute all         |
+
+    """
+    GAIN_0DB = const(0x00)
+    GAIN_2DB = const(0x01)
+    GAIN_4DB = const(0x02)
+    GAIN_6DB = const(0x03)
+    GAIN_8DB = const(0x04)
+    GAIN_10DB = const(0x05)
+    GAIN_12DB = const(0x06)
+    GAIN_14DB = const(0x07)
+    GAIN_16DB = const(0x08)
+    GAIN_20DB = const(0x0A)
+    GAIN_OFF = const(0x00)
+    GAIN_LOW = const(0x05)
+    GAIN_MED = const(0x0A)
+    GAIN_HIGH = const(0x0F)
+
+    
+class BD3491FS: # pylint: disable=too-many-instance-attributes
+    """Driver for the Rohm BD3491FS audio processor
+
+        :param ~busio.I2C i2c_bus: The I2C bus the BD3491FS is connected to.
+        :param address: The I2C device address for the sensor. Default is ``WAKKA WAKKA WAKKA`` but will accept
+            ``WAKKA WAKKA WAKKA`` when the ``SDO`` pin is connected to Ground.
+
+    """
+
+    _input_selector = RWBits(3, _INPUT_SELECTOR, 0, 1)
+    _input_gain = RWBits(4, _INPUT_GAIN, 1, 1)
+    _volume_gain_ch1 = RWBits(7, _VOLUME_GAIN_CH1, 0, 1)
+    _volume_gain_ch2 = RWBits(7, _VOLUME_GAIN_CH2, 0, 1)
+    _bass_gain = RWBits(3, _BASS_GAIN, 1, 1)
+    bass_gain_cut = RWBit(_BASS_GAIN, 7)
+    """Bass gain direcrtion. Set to True to cut the bass by the amount set in ``bass_gain``, or false
+        to boost the bass by the given amount"""
+
+    _treble_gain = RWBits(3, _TREBLE_GAIN, 1, 1)
+    _treble_gain_cut = RWBit(_TREBLE_GAIN, 7)
+    _surround_gain = RWBits(4, _SURROUND_GAIN, 0, 1)
+    _surround_mode = RWBit(_SURROUND_GAIN, 7)
+
+    _test_mode = UnaryStruct(_TEST_MODE, "<B")
+    _system_reset = UnaryStruct(_SYSTEM_RESET, "<B")
+    # _reset = RWBit(_CTRL_REG2, 2)
+    # _reset_filter = ROBits(8, _LPFP_RES, 0, 1)
+    # _chip_id = UnaryStruct(_WHO_AM_I, "<B")
+
+    def __init__(self, i2c_bus, address=0x41):
+        self.i2c_device = i2cdevice.I2CDevice(i2c_bus, address)
+        # if self._chip_id != 0xb1:
+        #     raise RuntimeError('Failed to find BD3491FS! Chip ID 0x%x' % self._chip_id)
+
+        # self.reset()
+
+
+
+        self._block_updates = True
+        self._interrupt_latch = True
+
+    def reset(self):
+        """Reset the sensor, restoring all configuration registers to their defaults"""
+        self._reset = True
+        # wait for the reset to finish
+        while self._reset:
+            pass
+
+    @property
+    def active_input(self):
+        """The currently selected input"""
+        return self._input_selector
+
+    @active_input.setter
+    def active_input(self, value):
+        self._input_selector = value
+
+    @property
+    def input_gain(self):
+        """The gain applied to all inputs equally"""
+        return self._input_gain
+    
+    @input_gain.setter
+    def input_gain(self, value):
+        allowed_gains = [0, 1, 2, 3, 4, 6, 8, 10]
+        if not( value in allowed_gains):
+            raise ValueError("input gain must be one of 0, 2, 4, 6, 8, 12, 16, 20 dB")
+        
+
+    @property
+    def channel_1_gain(self):
+        "The gain applied to channel 1 of the currently selected input pair in -dB"
+        self._volume_gain_ch1
+
+    @channel_1_gain.setter
+    def channel_1_gain(self, value):
+        if ((value < 0 ) or (value > 87)):
+            raise ArgumentError("channel gain must be from 0-87db")
+        self._volume_gain_ch1 = value
+    
+    @property
+    def channel_2_gain(self):
+        "The gain applied to channel 2 of the currently selected input pair in -dB"
+        return self._volume_gain_ch2
+
+    @channel_2_gain.setter
+    def channel_2_gain(self, value):
+        if ((value < 0 ) or (value > 87)):
+            raise ArgumentError("channel gain must be from 0-87db")
+        self._volume_gain_ch2 = value
+
+    @property
+    def bass_gain(self):
+        """The amount of gain applied to the bass channel in dB"""
+        return self._bass_gain
+
+    @bass_gain.setter
+    def bass_gain(self, value):
+        allowed_gains = [0, 1, 2, 3, 4, 6, 7]
+        if not( value in allowed_gains):
+            raise ValueError("input gain must be one of 0, 2, 4, 6, 8, 12, 14 dB")
+        self._bass_gain = value
+    
+    @property
+    def treble_gain(self):
+        """The amount of gain applied to the treble channel in dB"""
+        return self._treble_gain 
+
+    @treble_gain.setter
+    def treble_gain(self, value):
+        allowed_gains = [0, 1, 2, 3, 4, 6, 7]
+        if not( value in allowed_gains):
+            raise ValueError("input gain must be one of 0, 2, 4, 6, 8, 12, 14 dB")
+        self._treble_gain = value
+