jepler/Adafruit_CircuitPython_BME280
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

init

Browse source
This commit is contained in:
ladyada 2017-10-27 19:24:45 -04:00
commit 1deea3c96c
10 changed files with 587 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

3
.gitignore vendored Normal file
View file

@ -0,0 +1,3 @@
__pycache__
_build
*.pyc

53
.travis.yml Normal file
View file

@ -0,0 +1,53 @@
# Travis CI configuration for automated .mpy file generation.
# Author: Tony DiCola
# License: Public Domain
# This configuration will work with Travis CI (travis-ci.org) to automacially
# build .mpy files for CircuitPython when a new tagged release is created. This
# file is relatively generic and can be shared across multiple repositories by
# following these steps:
# 1. Copy this file into a .travis.yml file in the root of the repository.
# 2. Change the deploy > file section below to list each of the .mpy files
# that should be generated. The config will automatically look for
# .py files with the same name as the source for generating the .mpy files.
# Note that the .mpy extension should be lower case!
# 3. Commit the .travis.yml file and push it to GitHub.
# 4. Go to travis-ci.org and find the repository (it needs to be setup to access
# your github account, and your github account needs access to write to the
# repo). Flip the 'ON' switch on for Travis and the repo, see the Travis
# docs for more details: https://docs.travis-ci.com/user/getting-started/
# 5. Get a GitHub 'personal access token' which has at least 'public_repo' or
# 'repo' scope: https://help.github.com/articles/creating-an-access-token-for-command-line-use/
# Keep this token safe and secure! Anyone with the token will be able to
# access and write to your GitHub repositories. Travis will use the token
# to attach the .mpy files to the release.
# 6. In the Travis CI settings for the repository that was enabled find the
# environment variable editing page: https://docs.travis-ci.com/user/environment-variables/#Defining-Variables-in-Repository-Settings
# Add an environment variable named GITHUB_TOKEN and set it to the value
# of the GitHub personal access token above. Keep 'Display value in build
# log' flipped off.
# 7. That's it! Tag a release and Travis should go to work to add .mpy files
# to the release. It takes about a 2-3 minutes for a worker to spin up,
# build mpy-cross, and add the binaries to the release.
language: generic
sudo: true
deploy:
provider: releases
api_key: $GITHUB_TOKEN
file:
- "adafruit_bme280.mpy"
skip_cleanup: true
on:
tags: true
before_install:
- sudo apt-get -yqq update
- sudo apt-get install -y build-essential git python python-pip
- git clone https://github.com/adafruit/circuitpython.git
- make -C circuitpython/mpy-cross
- export PATH=$PATH:$PWD/circuitpython/mpy-cross/
- sudo pip install shyaml
before_deploy:
- shyaml get-values deploy.file < .travis.yml | sed 's/.mpy/.py/' | xargs -L1 mpy-cross

74
CODE_OF_CONDUCT.md Normal file
View file

@ -0,0 +1,74 @@
# Contributor Covenant Code of Conduct
## Our Pledge
In the interest of fostering an open and welcoming environment, we as
contributors and maintainers pledge to making participation in our project and
our community a harassment-free experience for everyone, regardless of age, body
size, disability, ethnicity, gender identity and expression, level of experience,
nationality, personal appearance, race, religion, or sexual identity and
orientation.
## Our Standards
Examples of behavior that contributes to creating a positive environment
include:
* Using welcoming and inclusive language
* Being respectful of differing viewpoints and experiences
* Gracefully accepting constructive criticism
* Focusing on what is best for the community
* Showing empathy towards other community members
Examples of unacceptable behavior by participants include:
* The use of sexualized language or imagery and unwelcome sexual attention or
advances
* Trolling, insulting/derogatory comments, and personal or political attacks
* Public or private harassment
* Publishing others' private information, such as a physical or electronic
address, without explicit permission
* Other conduct which could reasonably be considered inappropriate in a
professional setting
## Our Responsibilities
Project maintainers are responsible for clarifying the standards of acceptable
behavior and are expected to take appropriate and fair corrective action in
response to any instances of unacceptable behavior.
Project maintainers have the right and responsibility to remove, edit, or
reject comments, commits, code, wiki edits, issues, and other contributions
that are not aligned to this Code of Conduct, or to ban temporarily or
permanently any contributor for other behaviors that they deem inappropriate,
threatening, offensive, or harmful.
## Scope
This Code of Conduct applies both within project spaces and in public spaces
when an individual is representing the project or its community. Examples of
representing a project or community include using an official project e-mail
address, posting via an official social media account, or acting as an appointed
representative at an online or offline event. Representation of a project may be
further defined and clarified by project maintainers.
## Enforcement
Instances of abusive, harassing, or otherwise unacceptable behavior may be
reported by contacting the project team at support@adafruit.com. All
complaints will be reviewed and investigated and will result in a response that
is deemed necessary and appropriate to the circumstances. The project team is
obligated to maintain confidentiality with regard to the reporter of an incident.
Further details of specific enforcement policies may be posted separately.
Project maintainers who do not follow or enforce the Code of Conduct in good
faith may face temporary or permanent repercussions as determined by other
members of the project's leadership.
## Attribution
This Code of Conduct is adapted from the [Contributor Covenant][homepage], version 1.4,
available at [http://contributor-covenant.org/version/1/4][version]
[homepage]: http://contributor-covenant.org
[version]: http://contributor-covenant.org/version/1/4/

21
LICENSE Normal file
View file

@ -0,0 +1,21 @@
The MIT License (MIT)
Copyright (c) 2017 ladyada for Adafruit Industries
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.

44
README.rst Normal file
View file

@ -0,0 +1,44 @@
Introduction
============
.. image:: https://readthedocs.org/projects/adafruit-circuitpython-BME280/badge/?version=latest
:target: https://circuitpython.readthedocs.io/projects/BME280/en/latest/
:alt: Documentation Status
.. image :: https://img.shields.io/discord/327254708534116352.svg
:target: https://discord.gg/nBQh6qu
:alt: Discord
TODO
Dependencies
=============
This driver depends on:
* `Adafruit CircuitPython <https://github.com/adafruit/circuitpython>`_
* `Bus Device <https://github.com/adafruit/Adafruit_CircuitPython_BusDevice>`_
Please ensure all dependencies are available on the CircuitPython filesystem.
This is easily achieved by downloading
`the Adafruit library and driver bundle <https://github.com/adafruit/Adafruit_CircuitPython_Bundle>`_.
Usage Example
=============
TODO
Contributing
============
Contributions are welcome! Please read our `Code of Conduct
<https://github.com/adafruit/Adafruit_CircuitPython_BME280/blob/master/CODE_OF_CONDUCT.md>`_
before contributing to help this project stay welcoming.
API Reference
=============
.. toctree::
:maxdepth: 2
api

239
adafruit_bme280.py Normal file
View file

@ -0,0 +1,239 @@
# The MIT License (MIT)
#
# Copyright (c) 2017 ladyada for Adafruit Industries
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.
"""
`adafruit_bmp280`
====================================================
CircuitPython driver from BME280 Temperature, Humidity and Barometic Pressure sensor
* Author(s): ladyada
"""
import time, math
from micropython import const
try:
import struct
except ImportError:
import ustruct as struct
# I2C ADDRESS/BITS/SETTINGS
# -----------------------------------------------------------------------
_BME280_ADDRESS = const(0x77)
_BME280_CHIPID = const(0x60)
_BME280_REGISTER_CHIPID = const(0xD0)
_BME280_REGISTER_DIG_T1 = const(0x88)
_BME280_REGISTER_DIG_H1 = const(0xA1)
_BME280_REGISTER_DIG_H2 = const(0xE1)
_BME280_REGISTER_DIG_H3 = const(0xE3)
_BME280_REGISTER_DIG_H4 = const(0xE4)
_BME280_REGISTER_DIG_H5 = const(0xE5)
_BME280_REGISTER_DIG_H6 = const(0xE7)
_BME280_REGISTER_SOFTRESET = const(0xE0)
_BME280_REGISTER_CTRL_HUM = const(0xF2)
_BME280_REGISTER_STATUS = const(0xF3)
_BME280_REGISTER_CTRL_MEAS = const(0xF4)
_BME280_REGISTER_CONFIG = const(0xF5)
_BME280_REGISTER_PRESSUREDATA = const(0xF7)
_BME280_REGISTER_TEMPDATA = const(0xFA)
_BME280_REGISTER_HUMIDDATA = const(0xFD)
_BME280_PRESSURE_MIN_HPA = const(300)
_BME280_PRESSURE_MAX_HPA = const(1100)
_BME280_HUMIDITY_MIN = const(0)
_BME280_HUMIDITY_MAX = const(100)
class Adafruit_BME280:
def __init__(self):
"""Check the BME280 was found, read the coefficients and enable the sensor for continuous reads"""
# Check device ID.
id = self._read_byte(_BME280_REGISTER_CHIPID)
if _BME280_CHIPID != id:
raise RuntimeError('Failed to find BME280! Chip ID 0x%x' % id)
self._write_register_byte(_BME280_REGISTER_SOFTRESET, 0xB6)
time.sleep(0.5)
self._read_coefficients()
self.seaLevelhPa = 1013.25
self._write_register_byte(_BME280_REGISTER_CTRL_HUM, 0x03) # turn on humidity oversample 16x
@property
def temperature(self):
"""Gets the compensated temperature in degrees celsius."""
# perform one measurement
self._write_register_byte(_BME280_REGISTER_CTRL_MEAS, 0xFE) # high res, forced mode
# Wait for conversion to complete
while (self._read_byte(_BME280_REGISTER_STATUS) & 0x08):
time.sleep(0.002)
UT = self._read24(_BME280_REGISTER_TEMPDATA) / 16 # lowest 4 bits get dropped
#print("raw temp: ", UT)
var1 = (UT / 16384.0 - self.dig_T1 / 1024.0) * self.dig_T2
#print(var1)
var2 = ((UT / 131072.0 - self.dig_T1 / 8192.0) * (
UT / 131072.0 - self.dig_T1 / 8192.0)) * self.dig_T3
#print(var2)
self.t_fine = int(var1 + var2)
#print("t_fine: ", self.t_fine)
temp = (var1 + var2) / 5120.0
return temp
@property
def pressure(self):
"""Gets the compensated pressure in hectoPascals."""
self.temperature # force read of t_fine
# Algorithm from the BME280 driver https://github.com/BoschSensortec/BME280_driver/blob/master/bme280.c
adc = self._read24(_BME280_REGISTER_PRESSUREDATA) / 16 # lowest 4 bits get dropped
var1 = float(self.t_fine) / 2.0 - 64000.0
var2 = var1 * var1 * self.dig_P6 / 32768.0
var2 = var2 + var1 * self.dig_P5 * 2.0
var2 = var2 / 4.0 + self.dig_P4 * 65536.0
var3 = self.dig_P3 * var1 * var1 / 524288.0;
var1 = (var3 + self.dig_P2 * var1) / 524288.0
var1 = (1.0 + var1 / 32768.0) * self.dig_P1
if var1 == 0:
return 0
if var1:
p = 1048576.0 - adc
p = ((p - var2 / 4096.0) * 6250.0) / var1
var1 = self.dig_P9 * p * p / 2147483648.0
var2 = p * self.dig_P8 / 32768.0
p = p + (var1 + var2 + self.dig_P7) / 16.0
p /= 100
if (p < _BME280_PRESSURE_MIN_HPA): return _BME280_PRESSURE_MIN_HPA
if (p > _BME280_PRESSURE_MAX_HPA): return _BME280_PRESSURE_MAX_HPA
return p
else:
return _BME280_PRESSURE_MIN_HPA
@property
def humidity(self):
self.temperature # force read of t_fine
hum = self._read_register(_BME280_REGISTER_HUMIDDATA, 2)
#print("Humidity data: ", hum)
adc = float(hum[0] << 8 | hum[1])
#print("adc:", adc)
# Algorithm from the BME280 driver https://github.com/BoschSensortec/BME280_driver/blob/master/bme280.c
var1 = float(self.t_fine) - 76800.0
#print("var1 ", var1)
var2 = (self.dig_H4 * 64.0 + (self.dig_H5 / 16384.0) * var1)
#print("var2 ",var2)
var3 = adc - var2
#print("var3 ",var3)
var4 = self.dig_H2 / 65536.0
#print("var4 ",var4)
var5 = (1.0 + (self.dig_H3 / 67108864.0) * var1)
#print("var5 ",var5)
var6 = 1.0 + (self.dig_H6 / 67108864.0) * var1 * var5
#print("var6 ",var6)
var6 = var3 * var4 * (var5 * var6)
humidity = var6 * (1.0 - self.dig_H1 * var6 / 524288.0)
if (humidity > _BME280_HUMIDITY_MAX): return _BME280_HUMIDITY_MAX
if (humidity < _BME280_HUMIDITY_MIN): return _BME280_HUMIDITY_MIN
# else...
return humidity
@property
def altitude(self):
"""calculate the altitude based on the sea level pressure (seaLevelhPa) - which you must enter ahead of time)"""
p = self.pressure # in Si units for hPascal
return 44330 * (1.0 - math.pow(p / self.seaLevelhPa, 0.1903));
def _read_coefficients(self):
"""Read & save the calibration coefficients"""
coeff = self._read_register(_BME280_REGISTER_DIG_T1, 24)
coeff = list(struct.unpack('<HhhHhhhhhhhh', bytes(coeff)))
coeff = [float(i) for i in coeff]
self.dig_T1, self.dig_T2, self.dig_T3 , self.dig_P1, self.dig_P2, self.dig_P3, self.dig_P4, self.dig_P5, self.dig_P6, self.dig_P7, self.dig_P8, self.dig_P9 = coeff
self.dig_H1 = self._read_byte(_BME280_REGISTER_DIG_H1)
coeff = self._read_register(_BME280_REGISTER_DIG_H2, 7)
coeff = list(struct.unpack('<hBBBBb', bytes(coeff)))
self.dig_H2 = float(coeff[0])
self.dig_H3 = float(coeff[1])
self.dig_H4 = float((coeff[2] << 4) | (coeff[3] & 0xF))
self.dig_H5 = float(((coeff[3] & 0xF0) << 4) | coeff[4])
self.dig_H6 = float(coeff[5])
#print("%d %d %d" % (self.dig_T1, self.dig_T2, self.dig_T3))
#print("%d %d %d" % (self.dig_P1, self.dig_P2, self.dig_P3))
#print("%d %d %d" % (self.dig_P4, self.dig_P5, self.dig_P6))
#print("%d %d %d" % (self.dig_P7, self.dig_P8, self.dig_P9))
#print("%d %d %d" % (self.dig_H1, self.dig_H2, self.dig_H3))
#print("%d %d %d" % (self.dig_H4, self.dig_H5, self.dig_H6))
def _read_byte(self, register):
"""Read a byte register value and return it"""
return self._read_register(register, 1)[0]
def _read24(self, register):
"""Read an unsigned 24-bit value as a floating point and return it."""
ret = 0.0
for b in self._read_register(register, 3):
ret *= 256.0
ret += float(b & 0xFF)
return ret
class Adafruit_BME280_I2C(Adafruit_BME280):
def __init__(self, i2c, address=_BME280_ADDRESS):
import adafruit_bus_device.i2c_device as i2c_device
self._i2c = i2c_device.I2CDevice(i2c, address)
super().__init__()
def _read_register(self, register, length):
with self._i2c as i2c:
i2c.write(bytes([register & 0xFF]))
result = bytearray(length)
i2c.read_into(result)
#print("$%02X => %s" % (register, [hex(i) for i in result]))
return result
def _write_register_byte(self, register, value):
with self._i2c as i2c:
i2c.write(bytes([register & 0xFF, value & 0xFF]))
#print("$%02X <= 0x%02X" % (register, value))
class Adafruit_BME280_SPI(Adafruit_BME280):
def __init__(self, spi, cs, baudrate=100000):
import adafruit_bus_device.spi_device as spi_device
self._spi = spi_device.SPIDevice(spi, cs, baudrate=baudrate)
super().__init__()
def _read_register(self, register, length):
register = (register | 0x80) & 0xFF # Read single, bit 7 high.
with self._spi as spi:
spi.write(bytearray([register]))
result = bytearray(length)
spi.readinto(result)
#print("$%02X => %s" % (register, [hex(i) for i in result]))
return result
def _write_register_byte(self, register, value):
register &= 0x7F # Write, bit 7 low.
with self._spi as spi:
spi.write(bytes([register, value & 0xFF]))

5
api.rst Normal file
View file

@ -0,0 +1,5 @@
.. If you created a package, create one automodule per module in the package.
.. automodule:: adafruit_bme280
:members:

145
conf.py Normal file
View file

@ -0,0 +1,145 @@
# -*- coding: utf-8 -*-
import os
import sys
sys.path.insert(0, os.path.abspath('.'))
# -- General configuration ------------------------------------------------
# Add any Sphinx extension module names here, as strings. They can be
# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
# ones.
extensions = [
'sphinx.ext.autodoc',
'sphinx.ext.intersphinx',
'sphinx.ext.viewcode',
]
intersphinx_mapping = {'python': ('https://docs.python.org/3.4', None),'BusDevice': ('https://circuitpython.readthedocs.io/projects/bus_device/en/latest/', None),'CircuitPython': ('https://circuitpython.readthedocs.io/en/latest/', None)}
# Add any paths that contain templates here, relative to this directory.
templates_path = ['_templates']
source_suffix = '.rst'
# The master toctree document.
master_doc = 'README'
# General information about the project.
project = u'Adafruit BME280 Library'
copyright = u'2017 ladyada'
author = u'ladyada'
# The version info for the project you're documenting, acts as replacement for
# |version| and |release|, also used in various other places throughout the
# built documents.
#
# The short X.Y version.
version = u'1.0'
# The full version, including alpha/beta/rc tags.
release = u'1.0'
# The language for content autogenerated by Sphinx. Refer to documentation
# for a list of supported languages.
#
# This is also used if you do content translation via gettext catalogs.
# Usually you set "language" from the command line for these cases.
language = None
# List of patterns, relative to source directory, that match files and
# directories to ignore when looking for source files.
# This patterns also effect to html_static_path and html_extra_path
exclude_patterns = ['_build', 'Thumbs.db', '.DS_Store']
# The reST default role (used for this markup: `text`) to use for all
# documents.
#
default_role = "any"
# If true, '()' will be appended to :func: etc. cross-reference text.
#
add_function_parentheses = True
# The name of the Pygments (syntax highlighting) style to use.
pygments_style = 'sphinx'
# If true, `todo` and `todoList` produce output, else they produce nothing.
todo_include_todos = False
# -- Options for HTML output ----------------------------------------------
# The theme to use for HTML and HTML Help pages. See the documentation for
# a list of builtin themes.
#
on_rtd = os.environ.get('READTHEDOCS', None) == 'True'
if not on_rtd: # only import and set the theme if we're building docs locally
try:
import sphinx_rtd_theme
html_theme = 'sphinx_rtd_theme'
html_theme_path = [sphinx_rtd_theme.get_html_theme_path(), '.']
except:
html_theme = 'default'
html_theme_path = ['.']
else:
html_theme_path = ['.']
# Add any paths that contain custom static files (such as style sheets) here,
# relative to this directory. They are copied after the builtin static files,
# so a file named "default.css" will overwrite the builtin "default.css".
html_static_path = ['_static']
# Output file base name for HTML help builder.
htmlhelp_basename = 'AdafruitBME280Librarydoc'
# -- Options for LaTeX output ---------------------------------------------
latex_elements = {
# The paper size ('letterpaper' or 'a4paper').
#
# 'papersize': 'letterpaper',
# The font size ('10pt', '11pt' or '12pt').
#
# 'pointsize': '10pt',
# Additional stuff for the LaTeX preamble.
#
# 'preamble': '',
# Latex figure (float) alignment
#
# 'figure_align': 'htbp',
}
# Grouping the document tree into LaTeX files. List of tuples
# (source start file, target name, title,
# author, documentclass [howto, manual, or own class]).
latex_documents = [
(master_doc, 'AdafruitBME280Library.tex', u'Adafruit BME280 Library Documentation',
author, 'manual'),
]
# -- Options for manual page output ---------------------------------------
# One entry per manual page. List of tuples
# (source start file, name, description, authors, manual section).
man_pages = [
(master_doc, 'adafruitBME280library', u'Adafruit BME280 Library Documentation',
[author], 1)
]
# -- Options for Texinfo output -------------------------------------------
# Grouping the document tree into Texinfo files. List of tuples
# (source start file, target name, title, author,
# dir menu entry, description, category)
texinfo_documents = [
(master_doc, 'AdafruitBME280Library', u'Adafruit BME280 Library Documentation',
author, 'AdafruitBME280Library', 'One line description of project.',
'Miscellaneous'),
]
# API docs fix
autodoc_mock_imports = ['micropython']

2
readthedocs.yml Normal file
View file

@ -0,0 +1,2 @@
requirements_file: requirements.txt

1
requirements.txt Normal file
View file

@ -0,0 +1 @@
adafruit-circuitpython-bus-device