"""
Example showing how the BMP280 library can be used to set the various
parameters supported by the sensor.
Refer to the BMP280 datasheet to understand what these parameters do
"""
import time

import board
import busio
import adafruit_bmp280

# Create library object using our Bus I2C port
i2c = busio.I2C(board.SCL, board.SDA)
bmp280 = adafruit_bmp280.Adafruit_BMP280_I2C(i2c)

# OR create library object using our Bus SPI port
# spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
# bmp_cs = digitalio.DigitalInOut(board.D10)
# bmp280 = adafruit_bmp280.Adafruit_BMP280_SPI(spi, bmp_cs)

# change this to match the location's pressure (hPa) at sea level
bmp280.sea_level_pressure = 1013.25
bmp280.mode = adafruit_bmp280.MODE_NORMAL
bmp280.standby_period = adafruit_bmp280.STANDBY_TC_500
bmp280.iir_filter = adafruit_bmp280.IIR_FILTER_X16
bmp280.overscan_pressure = adafruit_bmp280.OVERSCAN_X16
bmp280.overscan_temperature = adafruit_bmp280.OVERSCAN_X2
# The sensor will need a moment to gather inital readings
time.sleep(1)

while True:
    print("\nTemperature: %0.1f C" % bmp280.temperature)
    print("Pressure: %0.1f hPa" % bmp280.pressure)
    print("Altitude = %0.2f meters" % bmp280.altitude)
    time.sleep(2)