# The MIT License (MIT)
#
# Copyright (c) 2016 Philip R. Moyer and Radomir Dopieralski for Adafruit Industries.
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.

# pylint: disable=too-few-public-methods

"""
`adafruit_ds1307` - DS1307 Real Time Clock module
=================================================

CircuitPython library to support DS1307 Real Time Clock (RTC).

This library supports the use of the DS1307-based RTC in CircuitPython.

Beware that most CircuitPython compatible hardware are 3.3v logic level! Make
sure that the input pin is 5v tolerant.

* Author(s): Philip R. Moyer and Radomir Dopieralski for Adafruit Industries

Implementation Notes
--------------------

**Hardware:**

* Adafruit `DS1307 RTC breakout <https://www.adafruit.com/products/3296>`_ (Product ID: 3296)

**Software and Dependencies:**

* Adafruit CircuitPython firmware (0.8.0+) for the ESP8622 and M0-based boards:
    https://github.com/adafruit/circuitpython/releases
* Adafruit's Register library: https://github.com/adafruit/Adafruit_CircuitPython_Register
* Adafruit's Bus Device library: https://github.com/adafruit/Adafruit_CircuitPython_BusDevice

**Notes:**

#.  Milliseconds are not supported by this RTC.
#.  Alarms and timers are not supported by this RTC.
#.  Datasheet: https://datasheets.maximintegrated.com/en/ds/DS1307.pdf

"""

from adafruit_bus_device.i2c_device import I2CDevice
from adafruit_register import i2c_bit
from adafruit_register import i2c_bcd_datetime

__version__ = "0.0.0-auto.0"
__repo__ = "https://github.com/adafruit/Adafruit_CircuitPython_DS1307.git"


class DS1307:
    """Interface to the DS1307 RTC."""

    disable_oscillator = i2c_bit.RWBit(0x0, 7)
    """True if the oscillator is disabled."""

    datetime_register = i2c_bcd_datetime.BCDDateTimeRegister(0x00)
    """Current date and time."""

    def __init__(self, i2c_bus):
        self.i2c_device = I2CDevice(i2c_bus, 0x68)

        # Try and verify this is the RTC we expect by checking the rate select
        # control bits which are 1 on reset and shouldn't ever be changed.
        buf = bytearray(2)
        buf[0] = 0x07
        with self.i2c_device as i2c:
            i2c.write_then_readinto(buf, buf, out_end=1, in_start=1)

        if (buf[1] & 0b00000011) != 0b00000011:
            raise ValueError("Unable to find DS1307 at i2c address 0x68.")

    @property
    def datetime(self):
        """Gets the current date and time or sets the current date and time then starts the
           clock."""
        return self.datetime_register

    @datetime.setter
    def datetime(self, value):
        self.disable_oscillator = False
        self.datetime_register = value