From d24bac8cd16cc8d6aa345326960059c107b948e0 Mon Sep 17 00:00:00 2001
From: siddacious <nospam187+github@gmail.com>
Date: Fri, 15 May 2020 17:11:22 -0700
Subject: [PATCH] fixing blinka example

---
 examples/ds1841_blinka_simpletest.py | 24 ++++++++++++++----------
 1 file changed, 14 insertions(+), 10 deletions(-)

diff --git a/examples/ds1841_blinka_simpletest.py b/examples/ds1841_blinka_simpletest.py
index 23a99f5..4883d8f 100644
--- a/examples/ds1841_blinka_simpletest.py
+++ b/examples/ds1841_blinka_simpletest.py
@@ -1,10 +1,6 @@
-from time import sleep
-import board
-import busio
-import adafruit_ds3502
-
-i2c = busio.I2C(board.SCL, board.SDA)
-ds3502 = adafruit_ds3502.DS3502(i2c)
+####### NOTE ################
+# This example is meant for use with Blinka/rasberry Pi due to the lack of analog pins.
+# CircuitPython board users should run the "ds1841_simpletest.py" example
 
 # WIRING:
 # 1 Wire connecting  VCC to RH to make a voltage divider using the
@@ -12,15 +8,23 @@ ds3502 = adafruit_ds3502.DS3502(i2c)
 
 # As this code runs, measure the voltage between ground and the RW (wiper) pin
 # with a multimeter. You should see the voltage change with each print statement.
+from time import sleep
+import board
+import busio
+import adafruit_ds1841
+
+i2c = busio.I2C(board.SCL, board.SDA)
+ds1841 = adafruit_ds1841.DS1841(i2c)
+
 while True:
-    ds3502.wiper = 127
+    ds1841.wiper = 127
     print("Wiper value set to 127")
     sleep(5.0)
 
-    ds3502.wiper = 0
+    ds1841.wiper = 0
     print("Wiper value set to 0")
     sleep(5.0)
 
-    ds3502.wiper = 63
+    ds1841.wiper = 63
     print("Wiper value set to 63")
     sleep(5.0)