diff --git a/NeoTrellis_M4_Simple_Drum_Machine/code.py b/NeoTrellis_M4_Simple_Drum_Machine/code.py
new file mode 100644
index 00000000..1d8ef08e
--- /dev/null
+++ b/NeoTrellis_M4_Simple_Drum_Machine/code.py
@@ -0,0 +1,188 @@
+import time
+import board
+import busio
+import audioio
+import adafruit_fancyled.adafruit_fancyled as fancy
+import adafruit_trellism4
+import adafruit_adxl34x
+
+tempo = 180  # Starting BPM
+
+# You can use the accelerometer to speed/slow down tempo by tilting!
+ENABLE_TILT_TEMPO = True
+MIN_TEMPO = 100
+MAX_TEMPO = 300
+
+SAMPLE_FOLDER = "/samples/"  # the name of the folder containing the samples
+# You get 4 voices, they must all have the same sample rate and must
+# all be mono or stereo (no mix-n-match!)
+VOICES = [SAMPLE_FOLDER+"voice01.wav",
+          SAMPLE_FOLDER+"voice02.wav",
+          SAMPLE_FOLDER+"voice03.wav",
+          SAMPLE_FOLDER+"voice04.wav"]
+
+# four colors for the 4 voices, using 0 or 255 only will reduce buzz
+DRUM_COLOR = ((0, 255, 255),
+              (0, 255, 0),
+              (255, 255, 0),
+              (255, 0, 0))
+# For the intro, pick any number of colors to make a fancy gradient!
+INTRO_SWIRL = [fancy.CRGB(255, 0, 0),  # red
+               fancy.CRGB(0, 255, 0),  # green
+               fancy.CRGB(0, 0, 255)]  # blue
+# the color for the sweeping ticker bar
+TICKER_COLOR = (255, 255, 255)
+
+# Our keypad + neopixel driver
+trellis = adafruit_trellism4.TrellisM4Express(rotation=90)
+
+# Our accelerometer
+i2c = busio.I2C(board.ACCELEROMETER_SCL, board.ACCELEROMETER_SDA)
+accelerometer = adafruit_adxl34x.ADXL345(i2c)
+
+def wheel(pos): # Input a value 0 to 255 to get a color value.
+    if pos < 0 or pos > 255:
+        return (0, 0, 0)
+    elif pos < 85:
+        return(int(pos * 3), int(255 - pos*3), 0)
+    elif pos < 170:
+        pos -= 85
+        return(int(255 - pos*3), 0, int(pos * 3))
+    else:
+        pos -= 170
+        return(0, int(pos * 3), int(255 - pos*3))
+
+# Play the welcome wav (if its there)
+with audioio.AudioOut(board.A1, right_channel=board.A0) as audio:
+    try:
+        f = open("welcome.wav", "rb")
+        wave = audioio.WaveFile(f)
+        audio.play(wave)
+        swirl = 0  # we'll swirl through the colors in the gradient
+        while audio.playing:
+            for i in range(32):
+                palette_index = ((swirl+i) % 32) / 32
+                color = fancy.palette_lookup(INTRO_SWIRL, palette_index)
+                # display it!
+                trellis.pixels[(i//8, i%8)] = color.pack()
+            swirl += 1
+            time.sleep(0.005)
+        f.close()
+        # Clear all pixels
+        trellis.pixels.fill(0)
+        # just hold a moment
+        time.sleep(0.5)
+    except OSError:
+        # no biggie, they probably deleted it
+        pass
+
+
+# Parse the first file to figure out what format its in
+with open(VOICES[0], "rb") as f:
+    wav = audioio.WaveFile(f)
+    print("%d channels, %d bits per sample, %d Hz sample rate " %
+          (wav.channel_count, wav.bits_per_sample, wav.sample_rate))
+
+    # Audio playback object - we'll go with either mono or stereo depending on
+    # what we see in the first file
+    if wav.channel_count == 1:
+        audio = audioio.AudioOut(board.A1)
+    elif wav.channel_count == 2:
+        audio = audioio.AudioOut(board.A1, right_channel=board.A0)
+    else:
+        raise RuntimeError("Must be mono or stereo waves!")
+    mixer = audioio.Mixer(voice_count=4,
+                          sample_rate=wav.sample_rate,
+                          channel_count=wav.channel_count,
+                          bits_per_sample=wav.bits_per_sample,
+                          samples_signed=True)
+    audio.play(mixer)
+
+samples = []
+# Read the 4 wave files, convert to stereo samples, and store
+# (show load status on neopixels and play audio once loaded too!)
+for v in range(4):
+    trellis.pixels[(v, 0)] = DRUM_COLOR[v]
+    wave_file = open(VOICES[v], "rb")
+    # OK we managed to open the wave OK
+    for x in range(1, 4):
+        trellis.pixels[(v, x)] = DRUM_COLOR[v]
+    sample = audioio.WaveFile(wave_file)
+    # debug play back on load!
+    mixer.play(sample, voice=0)
+    for x in range(4, 7):
+        trellis.pixels[(v, x)] = DRUM_COLOR[v]
+    while mixer.playing:
+        pass
+    trellis.pixels[(v, 7)] = DRUM_COLOR[v]
+    samples.append(sample)
+
+# Clear all pixels
+trellis.pixels.fill(0)
+
+# Our global state
+current_step = 7 # we actually start on the last step since we increment first
+# the state of the sequencer
+beatset = [[False] * 8, [False] * 8, [False] * 8, [False] * 8]
+# currently pressed buttons
+current_press = set()
+
+while True:
+    stamp = time.monotonic()
+    # redraw the last step to remove the ticker bar (e.g. 'normal' view)
+    for y in range(4):
+        color = 0
+        if beatset[y][current_step]:
+            color = DRUM_COLOR[y]
+        trellis.pixels[(y, current_step)] = color
+
+    # next beat!
+    current_step = (current_step + 1) % 8
+
+    # draw the vertical ticker bar, with selected voices highlighted
+    for y in range(4):
+        if beatset[y][current_step]:
+            r, g, b = DRUM_COLOR[y]
+            color = (r//2, g//2, b//2)  # this voice is enabled
+            #print("Playing: ", VOICES[y])
+            mixer.play(samples[y], voice=y)
+        else:
+            color = TICKER_COLOR     # no voice on
+        trellis.pixels[(y, current_step)] = color
+
+    # handle button presses while we're waiting for the next tempo beat
+    # also check the accelerometer if we're using it, to adjust tempo
+    while time.monotonic() - stamp < 60/tempo:
+        # Check for pressed buttons
+        pressed = set(trellis.pressed_keys)
+        #print(pressed)
+        for down in pressed - current_press:
+            print("Pressed down", down)
+            y = down[0]
+            x = down[1]
+            beatset[y][x] = not beatset[y][x] # enable the voice
+            if beatset[y][x]:
+                color = DRUM_COLOR[y]
+            else:
+                color = 0
+            trellis.pixels[down] = color
+        current_press = pressed
+
+        if ENABLE_TILT_TEMPO:
+            # Check accelerometer tilt!
+            tilt = accelerometer.acceleration[1]
+            #print("%0.1f" % tilt)
+            new_tempo = tempo
+            if tilt < -9:
+                new_tempo = tempo + 5
+            elif tilt < -6:
+                new_tempo = tempo + 1
+            elif tilt > 9:
+                new_tempo = tempo - 5
+            elif tilt > 6:
+                new_tempo = tempo - 1
+            if new_tempo != tempo:
+                tempo = max(min(new_tempo, MAX_TEMPO), MIN_TEMPO)
+                print("Tempo: %d BPM" % tempo)
+                time.sleep(0.05)  # dont update tempo too fast!
+        time.sleep(0.01)  # a little delay here helps avoid debounce annoyances
diff --git a/NeoTrellis_M4_Simple_Drum_Machine/samples/voice01.wav b/NeoTrellis_M4_Simple_Drum_Machine/samples/voice01.wav
new file mode 100644
index 00000000..610289dc
Binary files /dev/null and b/NeoTrellis_M4_Simple_Drum_Machine/samples/voice01.wav differ
diff --git a/NeoTrellis_M4_Simple_Drum_Machine/samples/voice02.wav b/NeoTrellis_M4_Simple_Drum_Machine/samples/voice02.wav
new file mode 100644
index 00000000..49538c92
Binary files /dev/null and b/NeoTrellis_M4_Simple_Drum_Machine/samples/voice02.wav differ
diff --git a/NeoTrellis_M4_Simple_Drum_Machine/samples/voice03.wav b/NeoTrellis_M4_Simple_Drum_Machine/samples/voice03.wav
new file mode 100644
index 00000000..327fdefb
Binary files /dev/null and b/NeoTrellis_M4_Simple_Drum_Machine/samples/voice03.wav differ
diff --git a/NeoTrellis_M4_Simple_Drum_Machine/samples/voice04.wav b/NeoTrellis_M4_Simple_Drum_Machine/samples/voice04.wav
new file mode 100644
index 00000000..a9446cdf
Binary files /dev/null and b/NeoTrellis_M4_Simple_Drum_Machine/samples/voice04.wav differ