diff --git a/Humidity_Alarm/LICENSE b/Humidity_Alarm/LICENSE
new file mode 100644
index 00000000..87439c50
--- /dev/null
+++ b/Humidity_Alarm/LICENSE
@@ -0,0 +1,21 @@
+MIT License
+
+Copyright (c) 2017 Dave Astels
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
diff --git a/Humidity_Alarm/humidity_alarm.ino b/Humidity_Alarm/humidity_alarm.ino
new file mode 100644
index 00000000..262348db
--- /dev/null
+++ b/Humidity_Alarm/humidity_alarm.ino
@@ -0,0 +1,100 @@
+// Humidity Monitor
+// Copyright (C) 2017 Dave Astels
+// Released until the MIT license
+//
+// The trinket is controlled by an external Power Timer Breakout
+//     (https://www.adafruit.com/product/3435)
+// 1. Every however often, the timer will power up the trinket which will run
+//    this file.
+// 2. Relative humidity is checked
+//   - if it's within range, the trinket tells the timer to shut it down and start
+//     the timing cycle
+//   - if it's out of range, it beeps & flashes the neopixel for 2 seconds, then
+//     sleeps for 10 seconds, then goes to 2
+
+#include "Adafruit_Si7021.h"
+#include <Adafruit_DotStar.h>
+#include <SPI.h>
+
+const unsigned long falling_tones[] = { 2000, 1980, 1960, 1940, 1920, 1900, 1880, 1860, 1840, 1820, 1800, 1780, 1760, 1740, 1720, 1700, 1680, 1660, 1640, 1620 };
+const unsigned long rising_tones[] =  { 2000, 2020, 2040, 2060, 2080, 3000, 3020, 3040, 3060, 3080, 4000, 4020, 4040, 4060, 4080, 5000, 5020, 5040, 5060, 5080 };
+
+const int dotstar_data_pin = 7;
+const int dotstar_clock_pin = 8;
+const int sound_pin = 3;
+const int sleep_pin = 4;
+
+const int target_humidity = 61.0;
+const unsigned long alert_interval = 20000;
+const unsigned long alert_duration = 500;
+const unsigned long comparison_delay = alert_interval - alert_duration;
+const unsigned long number_of_freq_steps = 20;
+const unsigned long alert_freq_step_time = alert_duration / number_of_freq_steps;
+
+Adafruit_Si7021 sensor = Adafruit_Si7021();
+//Adafruit_DotStar strip = Adafruit_DotStar(1, DOTSTAR_BRG);
+
+//--------------------------------------------------------------------------------
+// Sound the alert.
+
+void chirp(boolean direction)
+{
+  const unsigned long *freqs = direction ? rising_tones : falling_tones;
+  for (int i = 0; i < number_of_freq_steps; i++) {
+    tone(sound_pin, freqs[i]);
+    delay(alert_freq_step_time);
+  }
+  noTone(sound_pin);
+}
+
+
+//--------------------------------------------------------------------------------
+// Measure relative humidity and return whether it is under/in/over range.
+
+int check_rh()
+{
+  float relative_humidity = sensor.readHumidity();
+  if (relative_humidity < (target_humidity - 5)) {
+    return -1;
+  } else if (relative_humidity > (target_humidity + 5)) {
+    return 1;
+  } else {
+    return 0;
+  }
+}
+
+//--------------------------------------------------------------------------------
+// Repeatedly check the humidity and light the neopixel and sound the buzzer as
+// appropriate, for as long as the reading is out of range.
+// Initial comparison result is passed in.
+
+void warn_if_out_of_range(int comparison)
+{
+  while (comparison != 0) {
+    chirp(comparison > 0);
+    delay(comparison_delay);
+    comparison = check_rh();
+  }
+}
+
+
+
+void setup()
+{
+  pinMode(sleep_pin, OUTPUT);
+  digitalWrite(sleep_pin, LOW);
+  //  strip.setPixelColor(0, 0);
+  //  strip.show();
+
+  sensor.begin();
+  warn_if_out_of_range(check_rh());
+
+}
+
+void loop()
+{
+  digitalWrite(sleep_pin, HIGH);
+  delay(50);
+  digitalWrite(sleep_pin, LOW);
+  delay(50);
+}