Merge pull request #1302 from makermelissa/main

Add new Blinka boards

_blinka/olimex_a20_lime2.md

@@ -0,0 +1,57 @@
+---
+layout: download
+board_id: "olimex_a20_lime2"
+title: "A20-OLinuXino-LIME2 Download"
+name: "A20-OLinuXino-LIME2"
+manufacturer: "Olimex"
+board_url:
+ - "https://www.olimex.com/wiki/A20-OLinuXino-LIME2"
+board_image: "olimex_a20_lime2.jpg"
+download_instructions: ""
+downloads_display: true
+blinka: true
+date_added: 2023-12-11
+features:
+  - Ethernet
+  - HDMI/DisplayPort
+  - 40-pin GPIO
+  - Infrared Receiver
+---
+
+A20-OLinuXino-LIME2 looks similar to both [A20-OLinuXino-LIME](https://www.olimex.com/wiki/A20-OLinuXino-LIME) and [A10-OLinuXino-LIME](https://www.olimex.com/wiki/A10-OLinuXino-LIME). The major differences between A20-OLinuXino-LIME2 and A20-OLinuXino-LIME are:
+
+- LIME2 has gigabit Ethernet (GbE), compared to the standard 100Mb Ethernet of the LIME
+- LIME2 design provides double the RAM memory, compared to the LIME design (1024 vs 512)
+- Much better routing of DDR3 memory.
+- Increased the number of layers from 6 in LIME to 8 in LIME2
+- Corrected pinout of the LCD and GPIO connectors (shields designed for the LIME layout are not compatible with the LIME2 layout)
+
+
+The A10 and the A20 processors are pin-to-pin compatible. Because of the processor, software-wise the board is closer to [A20-OLinuXino-LIME](https://www.olimex.com/wiki/A20-OLinuXino-LIME) than to the [A10-OLinuXino-LIME](https://www.olimex.com/wiki/A10-OLinuXino-LIME). This resemblance to other designs definitely might speed the development on the board - a lot of software written for A20-OLinuXino-LIME might work out-of-the-box with A20-OLinuXino-LIME2. Additionally, pinout tables, GPIO maps, etc released for A20-OLinuXino-LIME would apply to A20-OLinuXino-LIME2 **(except for the 0.05" step connectors - LCD display and all the GPIOs connectors, which have a different layout compared to both A20-OLinuXino-LIME and A10-OLinuXino-LIME)**.
+
+A20-OLinuXino-LIME2 features:
+
+- A20 Cortex-A7 dual-core ARM Cortex-A7 CPU and dual-core Mali 400 GPU
+- **1GB DDR3 RAM memory**
+- **1 gigabit native Ethernet**
+- optional 4GB NAND FLASH memory
+- SATA connector with 5V SATA power jack
+- HDMI FullHD 1080p
+- 2x USB Low-Full-High-Speed hosts with power control and current limiter
+- USB-OTG with power control and current limiter
+- LiPo Battery connector with battery-charging capabilities
+- LCD connector compatible with with 4.3", 7.0", 10.1" LCD modules from Olimex
+- 160 GPIOs on three GPIO connectors
+- MicroSD card connector
+- DEBUG-UART connector for console debug with USB-SERIAL-CABLE-F
+- status LED
+- Battery charge status LED
+- Power LED
+- 2KB EEPROM for MAC address storage and more
+- 2 BUTTONS with ANDROID functionality + RESET button
+- 2 mount holes
+- 5V input power supply, noise immune design
+- PCB dimensions: 84 x 60 mm
+
+## Purchase
+* [Olimex](https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-LIME2/open-source-hardware)

_blinka/orange_pi_5_plus.md

@@ -0,0 +1,53 @@
+---
+layout: download
+board_id: "orange_pi_5_plus"
+title: "Orange Pi 5 Plus Download"
+name: "Orange Pi 5 Plus"
+manufacturer: "Shenzhen Xunlong Software CO., Limited"
+board_url:
+ - "http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-5-plus.html"
+board_image: "orange_pi_5_plus.jpg"
+download_instructions: ""
+downloads_display: true
+blinka: true
+date_added: 2023-12-11
+features:
+  - Ethernet
+  - USB 3.0
+  - HDMI/DisplayPort
+  - 40-pin GPIO
+  - USB 3.0
+---
+
+Orange Pi 5 Plus uses Rockchip RK3588 8-core 64-bit processor, quad-core A76+quad-core A55, with 8nm process design, up to 2.4GHz main frequency, integrated ARM Mali-G610, built-in 3D GPU, compatible with OpenGL ES1.1/2.0/3.2, OpenCL 2.2 and Vulkan 1.2; embedded NPU supports INT4/INT8/INT16/FP16 mixed computing, with up to 6Tops of computing power, which can meet the edge computing needs of most end devices; 4GB/8GB/16GB LPDDR4/4X memory and eMMC socket, which can be connected with 16GB/32GB/64GB/128GB/256GB eMMC module. Orange Pi 5 Plus supports Orange Pi OS, the official operating system developed by Orange Pi, as well as Android 12, Debian 11, Ubuntu 22.04 and other operating systems.
+
+Orange Pi 5 Plus provides abundant interfaces, including two HDMl output ports, one HDMl input port , two PCIe extended 2.5G Ethernet ports, an M.2 M-Key slot that supports installation of NVMe SSDs, and an M.2 E-Key slot that supports Wi-Fi6/BT modules. In addition, Orange Pi 5 Plus has two USB 3.0, two USB 2.0, and two Type-C (one of which is a power connector).
+Orange Pi 5 Plus has a wide range of uses to help embedded system development enthusiasts explore, and is also suitable for enterprises developing mini machine vision systems with multiple Ethernet ports, Orange Pi 5 Plus offers enhanced high-end applications performance experience to meet the needs of product customization in different industries.
+
+**Specifications**
+- Rockchip RK3588 (8nm LP process)
+- 8-core 64-bit processor4 x Cortex-A76(2.4GHz), 4 x Cortex-A55(1.8GHz) and separate NEON co-processors
+- Arm Mali-G610Built-in 3D GPUCompatible with OpenGL ES1.1/2.0/3.2, OpenCL 2.2 and Vulkan 1.2
+- Embedded NPU supports INT4/INT8/INT16/FP16 mixed operation, with up to 6Tops computing power
+- RK806-1
+- 4GB/8GB/16GB （LPDDR4/4X）
+- QSPI Nor FLASH: 16MB/32MBMicroSD card slot: up to 128GBeMMC socket: 16GB/32GB/64GB/128GB/256GB eMMC module can be attachedM.2 2280 slot for NVMe SSDs (PCIe 3.0 x4) up to 2,000 MB/s
+- USB3.0 × 2 USB2.0 × 2 Type-C ×1
+- 2x HDMI 2.1 out up to 8k@60FPS1x Type-C with DP TX 1.4A，up to 8K@30FPS1x HDMI in with up to 4K@60FPS1 x MIPI DSI TX 4 Lane，up to 4K @60Hz
+- 1x 6Pin FPC socket
+- 1XMIPI CSI 4 Lane
+- CODEC:ES83881xAudio 3.5mm jack with mic1xMIC In1xHDMI 2.1 eARC1xSPK
+- 2xPCIe 2.5G LAN（RTL8125BG)
+- 40Pin dual row pins with the following multiplexing functions: UART, I2C, SPI, CAN, I2S, PDM, AUDDSM, SDIO, PWM, GPIO
+- M.2 connector M key (bottom) for NVMe with PCIe 3.0 x4 lanes 2280 SSD
+- M.2 connector E key (top) for connectivity with PCIe 2.0 x1/PCM/UART/USB2.0,2230 Wi-Fi6 /BT supported
+- 1×MaskROM key 1xRecovery 1×on/off key
+- Support Type-C power supply, 5V@4A
+- 1x IR receiver tube
+- RGB LED side light
+- 5V FAN
+- 2 Pin: RTC backup battery
+- 3 Pin debug serial port (UART)
+
+## Purchase
+* [Amazon](https://amzn.to/46TH8bh)