Merge pull request #394 from makermelissa/master

Updated CLUE image and added some future boards

_board/imxrt1010_evk.md

@@ -1,8 +1,8 @@
 ---
 layout: download
 board_id: "imxrt1010_evk"
-title: "MIMXRT1010-EVK Download"
-name: "MIMXRT1010-EVK"
+title: "MIMXRT1010 Eval Kit Download"
+name: "MIMXRT1010 Eval Kit"
 manufacturer: "NXP"
 board_url: "https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1010-evaluation-kit:MIMXRT1010-EVK"
 board_image: "imxrt1010_evk.jpg"

_board/imxrt1020_evk.md

@@ -0,0 +1,19 @@
+---
+layout: download
+board_id: "imxrt1020_evk"
+title: "MIMXRT1020 Eval Kit Download"
+name: "MIMXRT1020 Eval Kit"
+manufacturer: "NXP"
+board_url: "https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1020-evaluation-kit:MIMXRT1020-EVK"
+board_image: "imxrt1020_evk.jpg"
+features:
+
+---
+The i.MX RT1020 EVK is a 2-layer low-cost through-hole USB-powered PCB. At its heart lies the i.MX RT1020 crossover MCU in LQFP144 package, featuring NXP’s advanced implementation of the Arm® Cortex®-M7 core. This core operates at speeds up to 500 MHz to provide high CPU performance and excellent real-time response.
+
+## Purchase
+* [NXP](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1020-evaluation-kit:MIMXRT1020-EVK)
+
+## Contribute
+
+Have some info to add for this board? Edit the source for this page [here](https://github.com/adafruit/circuitpython-org/edit/master/_board/{{ page.board_id }}.md).

_board/imxrt1060_evk.md

@@ -0,0 +1,19 @@
+---
+layout: download
+board_id: "imxrt1060_evk"
+title: "MIMXRT1060 Eval Kit Download"
+name: "MIMXRT1060 Eval Kit"
+manufacturer: "NXP"
+board_url: "https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1060-evaluation-kit:MIMXRT1060-EVK"
+board_image: "imxrt1060_evk.jpg"
+features:
+
+---
+The i.MX RT1060 EVK is a 4-layer through-hole USB-powered PCB. At its heart lies the i.MX RT1060 crossover MCU, featuring NXP’s advanced implementation of the Arm® Cortex®-M7 core. This core operates at speeds up to 600 MHz to provide high CPU performance and excellent real-time response.
+
+## Purchase
+* [NXP](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1060-evaluation-kit:MIMXRT1060-EVK)
+
+## Contribute
+
+Have some info to add for this board? Edit the source for this page [here](https://github.com/adafruit/circuitpython-org/edit/master/_board/{{ page.board_id }}.md).

_board/teensy40.md

@@ -0,0 +1,52 @@
+---
+layout: download
+board_id: "teensy40"
+title: "Teensy 4.0 Download"
+name: "Teensy 4.0"
+manufacturer: "PJRC"
+board_url: "https://www.pjrc.com/store/teensy40.html"
+board_image: "teensy40.jpg"
+features:
+
+---
+Who else could pack a 600 MHz microcontroller into such a Teensy little board? The Teensy 4.0 features an ARM Cortex-M7 processor at 600 MHz, with a NXP iMXRT1062 chip, the fastest microcontroller available today - [ten times faster than the Teensy 3.2](https://github.com/PaulStoffregen/CoreMark)! The NXP iMXRT1062 is a 'cross-over' processor, which has the functionality of a microcontroller, at the speeds of a microcomputer. It's perfect for when you need tons of flash, RAM and, to crunch lots of data, or when you need two full speed USB ports. It even has a graphics processor! All this for two sawbucks.
+
+Teensy 4.0 can be programmed using the Arduino IDE with [Teensyduino add-on](https://www.pjrc.com/teensy/td_download.html).
+
+**Power Consumption & Management**
+When running at 600 MHz, Teensy 4.0 consumes approximately 100 mA current, considerably more than most microcontrollers. To help reduce power, Teensy 4.0 provides support for dynamic clock scaling. Unlike traditional microcontrollers, where changing the clock speed causes wrong baud rates and other issues, Teensy 4.0 hardware and Teensyduino's software support for Arduino timing functions are designed to allow dynamically speed changes. Serial baud rates, audio streaming sample rates, and Arduino functions like delay() and millis(), and Teensyduino's extensions like IntervalTimer and elapsedMillis, continue to work properly while the CPU changes speed.
+
+Teensy 4.0 also provides a power shut off feature. By connecting a pushbutton to the On/Off pin, the 3.3V power supply can be completely disabled by holding the button for 5 seconds, and turned back on by a brief button press. If a coin cell is connected to VBAT, Teensy 4.0's RTC also continues to keep track of date & time while the power is off.
+
+Teensy 4.0 also can also be overclocked, well beyond 600 MHz!
+
+**Technical Specifications**
+ - ARM Cortex-M7 at 600 MHz
+ - 1024K RAM (512K is tightly coupled)
+ - 2048K Flash (64K reserved for recovery & EEPROM emulation)
+ - 2 USB ports, both 480 MBit/sec
+ - 3 CAN Bus (1 with CAN FD)
+ - 2 I2S Digital Audio
+ - 1 S/PDIF Digital Audio
+ - 1 SDIO (4 bit) native SD
+ - 3 SPI, all with 16 word FIFO
+ - 3 I2C, all with 4 byte FIFO
+ - 7 Serial, all with 4 byte FIFO
+ - 32 general purpose DMA channels
+ - 31 PWM pins
+ - 40 digital pins, all interrrupt capable
+ - 14 analog pins, 2 ADCs on chip
+ - Cryptographic Acceleration
+ - Random Number Generator
+ - RTC for date/time
+ - Programmable FlexIO
+ - Pixel Processing Pipeline
+ - Peripheral cross triggering
+ - Power On/Off management
+
+## Purchase
+* [Adafruit](https://www.adafruit.com/product/4323)
+
+## Contribute
+
+Have some info to add for this board? Edit the source for this page [here](https://github.com/adafruit/circuitpython-org/edit/master/_board/{{ page.board_id }}.md).

adabot

@@ -1 +1 @@
-Subproject commit 42bfc73fec3a0f1dffd7c7999b393001a64b1648
+Subproject commit 56ccf2c5330282a766e2d103da58918051351a89