Merge pull request #649 from FBSeletronica/franzininho-wifi-boards

Franzininho wifi boards

_board/franzininho_wifi_wroom.md

@@ -0,0 +1,54 @@
+---
+layout: download
+board_id: "franzininho_wifi_wroom"
+title: "Franzininho WiFi Wrover Download"
+name: "Franzininho WiFi Wroom"
+manufacturer: "Franzininho"
+board_url: "https://github.com/Franzininho/Franzininho-WIFI"
+board_image: "Franzininho-wifi-wroom.jpg"
+date_added: 2021-3-13
+downloads_display: true
+features:
+  - Wi-Fi
+---
+
+Franzininho WiFi Board is a development board to evaluate ESP32-S2 Modules (Wroom and Wrover) and develop the new generation of Franzininho Boards. The Franzininho project was created to develop skills in people in the areas of electronics and programming, through activities in the DIY format and in conjunction with maker culture in Brazil.
+
+As there are not many boards on the Brazilian market with ESP32-S2, we developed Franzininho WiFi to serve as the ESP32-S2 development platform and help us evaluate and validate applications with this SoC.
+
+This version comes with **ESP32-S2 Wroom module**.
+
+**Features:**
+
+- ESP32-S2 Wroom: 
+  - Xtensa®single-core32-bit LX7 microprocessor, up to 240 MHz
+  - 128 KB ROM
+  - 320 KB SRAM
+  - 16 KB SRAM in RTC
+  - WiFi 802.11 b/g/n
+- Interfaces: GPIO, SPI, LCD, UART, I2C, I2S, Camera interface, IR, pulse counter, LED PWM, TWAI(compatible with ISO 11898-1), USB 1.1OTG, ADC, DAC, touch sensor, temperature sensor.
+- USB Type-A Male
+- RGB LED (WS2812) (GPIO 18)
+- 40 pin broken out to 2x20 2.54mm header pins(36 GPIO) - Breadboard Friendly
+- Reset and DFU (BOOT0) buttons to get into the ROM bootloader (which is a USB serial port so you don’t need a separate cable!)
+- Serial debug pins ( TX and RX, for checking the hardware serial debug console)
+JTAG pads for advanced debugging access.
+- 3.3 V Power On LED
+- 3.3 V Regulator
+- Power: 
+  - Micro USB port (default power supply)
+  - 5V and GND header pins
+  - 3V3 and GND header pins
+- Dimensions: 72 mm x 30 mm
+- Works with ESP-IDF or CircuitPython
+
+
+
+
+## Purchase
+Add any links to purchase the board
+* [Franzininho (BRAZIL)](https://franzininho.com.br/)
+
+## Contribute
+
+Have some info to add for this board? Edit the source for this page [here](https://github.com/adafruit/circuitpython-org/edit/master/_board/{{ page.board_id }}.md).

_board/franzininho_wifi_wrover.md

@@ -0,0 +1,55 @@
+---
+layout: download
+board_id: "franzininho_wifi_wrover"
+title: "Franzininho WiFi Wrover Download"
+name: "Franzininho WiFi Wrover"
+manufacturer: "Franzininho"
+board_url: "https://github.com/Franzininho/Franzininho-WIFI"
+board_image: "Franzininho-wifi-wrover.jpg"
+date_added: 2021-3-13
+downloads_display: true
+features:
+  - Wi-Fi
+---
+
+Franzininho WiFi Board is a development board to evaluate ESP32-S2 Modules (Wroom and Wrover) and develop the new generation of Franzininho Boards. The Franzininho project was created to develop skills in people in the areas of electronics and programming, through activities in the DIY format and in conjunction with maker culture in Brazil.
+
+As there are not many boards on the Brazilian market with ESP32-S2, we developed Franzininho WiFi to serve as the ESP32-S2 development platform and help us evaluate and validate applications with this SoC.
+
+This version comes with **ESP32-S2 Wrover module**.
+
+**Features:**
+
+- ESP32-S2 Wrover: 
+  - Xtensa®single-core32-bit LX7 microprocessor, up to 240 MHz
+  - 128 KB ROM
+  - 320 KB SRAM
+  - 16 KB SRAM in RTC
+  - 2 MB (8 Mbit) PSRAM
+  - WiFi 802.11 b/g/n
+- Interfaces: GPIO, SPI, LCD, UART, I2C, I2S, Camera interface, IR, pulse counter, LED PWM, TWAI(compatible with ISO 11898-1), USB 1.1OTG, ADC, DAC, touch sensor, temperature sensor.
+- USB Type-A Male
+- RGB LED (WS2812) (GPIO 18)
+- 40 pin broken out to 2x20 2.54mm header pins(36 GPIO) - Breadboard Friendly
+- Reset and DFU (BOOT0) buttons to get into the ROM bootloader (which is a USB serial port so you don’t need a separate cable!)
+- Serial debug pins ( TX and RX, for checking the hardware serial debug console)
+JTAG pads for advanced debugging access.
+- 3.3 V Power On LED
+- 3.3 V Regulator
+- Power: 
+  - Micro USB port (default power supply)
+  - 5V and GND header pins
+  - 3V3 and GND header pins
+- Dimensions: 72 mm x 30 mm
+- Works with ESP-IDF or CircuitPython
+
+
+
+
+## Purchase
+Add any links to purchase the board
+* [Franzininho (BRAZIL)](https://franzininho.com.br/)
+
+## Contribute
+
+Have some info to add for this board? Edit the source for this page [here](https://github.com/adafruit/circuitpython-org/edit/master/_board/{{ page.board_id }}.md).