diff --git a/_board/adafruit_feather_esp32s2.md b/_board/adafruit_feather_esp32s2.md
index 3f9d1b8f..488ffdc8 100644
--- a/_board/adafruit_feather_esp32s2.md
+++ b/_board/adafruit_feather_esp32s2.md
@@ -20,7 +20,7 @@ features:
 
 What's Feather-shaped and has an ESP32-S2 WiFi module? What has a STEMMA QT connector for I2C devices? What has your favorite Espressif WiFi microcontroller and lots of Flash and RAM memory for your next IoT project? What will make your next IoT project flyyyyy?
 
-That's right - it's the new **Adafruit ESP32-S2 Feather**! With native USB and 4 MB flash + 2 MB of PSRAM, this board is perfect for use with CircuitPython or Arduino with low-cost WiFi. Native USB means it can act like a keyboard or a disk drive. WiFi means its awesome for IoT projects. And Feather means it works with the large community of Feather Wings for expandability.
+That's right - it's the new **Adafruit Feather ESP32-S2** and the **Adafruit Feather ESP32-S2 with BME280**! With native USB and 4 MB flash + 2 MB of PSRAM, this board is perfect for use with CircuitPython or Arduino with low-cost WiFi. Native USB means it can act like a keyboard or a disk drive. WiFi means its awesome for IoT projects. And Feather means it works with the large community of Feather Wings for expandability.
 
 The ESP32-S2 is a highly-integrated, low-power, 2.4 GHz Wi-Fi System-on-Chip (SoC) solution that now has **built-in native USB** as well as some other interesting new technologies like Time of Flight distance measurements. With its state-of-the-art power and RF performance, this SoC is an ideal choice for a wide variety of application scenarios relating to the [Internet of Things (IoT)](https://www.adafruit.com/category/342), [wearable electronics](https://www.adafruit.com/category/65), and smart homes.
 
@@ -32,6 +32,7 @@ The ESP32-S2 is a highly-integrated, low-power, 2.4 GHz Wi-Fi System-on-Chip (So
 - **Mini module** has FCC/CE certification and comes with 4 MByte of Flash and 2 MByte of PSRAM - you can have huge data buffers
 - **Power options** - USB type C **or** Lipoly battery
 - **Built-in battery charging** when powered over USB-C
+- **BME280 temperature / humidity / barometric pressures sensor** connected over I2C on address 0x77 for immediate ambient weather sensing (**on BME280 version only!**)
 - **LiPoly battery monitor** - LC709203 chip actively monitors your battery for voltage and state of charge / percentage reporting over I2C
 - **Reset and DFU** (BOOT0) buttons to get into the ROM bootloader (which is a USB serial port so you don't need a separate cable!)
 - **Serial debug output pin** (optional, for checking the hardware serial debug console)