Update info and images for 42. Keebs Frood

_board/42keebs_frood.md

@@ -1,38 +1,36 @@
 ---
 layout: download
 board_id: "42keebs_frood"
-title: " Download"
-name: "Maker Pi RP2040"
+title: "42. Keebs Frood Download"
+name: "The Frood"
 manufacturer: "42. Keebs"
-board_url: "https://42keebs.eu/shop/parts/controllers/frood-rp2040-pro-micro-controller/"
+board_url: "https://github.com/piit79/frood"
 board_image: "42keebs_frood.jpg"
-date_added: 2022-11-1
+date_added: 2022-10-26
 family: raspberrypi
 features:
   - USB-C
   - Breadboard-Friendly
 ---
 
-The Frood is a high-performance and affordable Pro Micro drop-in replacement based on a Raspberry Pi RP2040. It is physically and electrically compatible with Elite-C/nice!nano as much as possible.
+The Frood is a high-performance and affordable drop-in replacement for the Pro Micro (used in many DIY custom mechanical keyboard kits), based on the Raspberry Pi RP2040. It is physically and electrically compatible with Elite-C/nice!nano as much as possible.
 
-It follows the SparkFun Pro Micro RP2040 pinout with 5 more pins (GPIO12-GPIO16) added along the bottom edge (like on Elite-C), and USB data lines broken out in the top corners (like nice!nano).
+It follows the SparkFun Pro Micro RP2040 pinout with 5 extra pins (GPIO12-GPIO16) added along the bottom edge (like Elite-C), and USB data lines broken out in the top corners (like nice!nano).
 
 ## Features
-- Pinout compatible with the classic Pro Micro
-- I/O pin mapping follows Sparkfun Pro Micro RP2040 with 5 more digital I/O pins at the bottom (same layout as the Elite-C)
-- Powerful dual-core RP2040 32-bit Arm microcontroller with 133 MHz clock speed (8 times the Pro Micro)
-- 2 MB flash storage – *64 times* as much as Pro Micro! Should fit all the RGB animations in the world!
-- 256 kB SRAM, or 10 times as much as Pro Micro
-- Just 3.3 mm thick thanks to a mid-mount USB-C socket that sits flush with the bottom of the PCB
-- UF2 bootloader for drag & drop flashing – the bootloader presents a USB flash-like device. No extra software needed!
-- Total of 23 digital I/O pins supporting a maximum of 132 switches in a standard 11×12 matrix! Or perhaps a 40% split keyboard (up to 46 switches) with no diodes?
-- 4 pins configurable as analogue input (ADC)
-- USB data lines (D+, D-) broken out at the top for daughterboard/external USB-C socket compatibility
-- 500 mA on-board 3.3 V regulator
-- 500 mA resettable fuse for over-current protection
-- USB power (VBUS) connected to digital I/O pin GPIO19 for USB power detection (for split keyboard main half detection)
-- Currently available in black with immersion gold finish (ENIG). White version coming soon!
+- Powerful dual-core Raspberry Pi RP2040 MCU
+- 2 MB on-board flash memory
+- Only 3.2 mm thick thanks to a mid-mounted USB-C socket
+- 500 mA linear regulator and resettable fuse
+- Combined Pro Micro / Elite-C / nice!nano / SparkFun Pro Micro RP2040 compatible pinout
+- 5 extra I/O pins (GPIO12-GPIO16) added along the bottom edge 
+- 23 available digital pins for a maximum of 11x12 = 132 switches (using a standard matrix)
+- 4 pins configurable as analogue inputs
+- USB D+/D- broken out for use with an external USB socket/daughterboard
+- USB power sensing on GPIO19 for split keyboard side detection
+- UF2 bootloader for drag & drop programming with no extra software required
+- BOOT and RESET pads on the bottom of the PCB (in case )
+- Orange indicator LED on pin GPIO17
 
 ## Purchase
-
-* [42. Keebs](https://42keebs.eu/shop/parts/controllers/frood-rp2040-pro-micro-controller/)
+- [42. Keebs](https://42keebs.eu/shop/parts/controllers/frood-rp2040-pro-micro-controller/)