Merge remote-tracking branch 'origin/main'

ports/espressif/boards/thingpulse_pendrive_s3/board.c

@@ -0,0 +1,10 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
+#include "supervisor/board.h"
+
+
+// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.

ports/espressif/boards/thingpulse_pendrive_s3/mpconfigboard.h

@@ -0,0 +1,29 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
+#pragma once
+
+// Micropython setup
+
+#define MICROPY_HW_BOARD_NAME       "ThingPulse Pendrive S3"
+#define MICROPY_HW_MCU_NAME         "ESP32S3"
+
+#define MICROPY_HW_NEOPIXEL (&pin_GPIO5)
+#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO21)
+
+#define MICROPY_HW_LED_STATUS (&pin_GPIO13)
+
+#define DEFAULT_I2C_BUS_SCL (&pin_GPIO4)
+#define DEFAULT_I2C_BUS_SDA (&pin_GPIO3)
+
+#define DEFAULT_SPI_BUS_SCK (&pin_GPIO36)
+#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO35)
+#define DEFAULT_SPI_BUS_MISO (&pin_GPIO37)
+
+#define DEFAULT_UART_BUS_RX (&pin_GPIO38)
+#define DEFAULT_UART_BUS_TX (&pin_GPIO39)
+
+#define DOUBLE_TAP_PIN (&pin_GPIO34)

ports/espressif/boards/thingpulse_pendrive_s3/mpconfigboard.mk

@@ -0,0 +1,19 @@
+USB_VID = 0x303A
+USB_PID = 0x8204
+USB_PRODUCT = "ThingPulse Pendrive S3"
+USB_MANUFACTURER = "ThingPulse"
+
+IDF_TARGET = esp32s3
+
+CIRCUITPY_ESP_FLASH_SIZE = 4MB
+CIRCUITPY_ESP_FLASH_MODE = qio
+CIRCUITPY_ESP_FLASH_FREQ = 80m
+
+CIRCUITPY_ESP_PSRAM_SIZE = 2MB
+CIRCUITPY_ESP_PSRAM_MODE = qio
+CIRCUITPY_ESP_PSRAM_FREQ = 80m
+
+CIRCUITPY_ESPCAMERA = 0
+CIRCUITPY_DISPLAYIO = 1
+
+FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel

ports/espressif/boards/thingpulse_pendrive_s3/pins.c

@@ -0,0 +1,42 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
+#include "shared-bindings/board/__init__.h"
+
+static const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    { MP_ROM_QSTR(MP_QSTR_BUTTON), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_BOOT0), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_GPIO0) },
+
+    { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_TouchIn), MP_ROM_PTR(&pin_GPIO1) },
+
+    { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_GPIO5) },
+    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO5) },
+
+    { MP_ROM_QSTR(MP_QSTR_D33), MP_ROM_PTR(&pin_GPIO33) },
+
+    { MP_ROM_QSTR(MP_QSTR_D34), MP_ROM_PTR(&pin_GPIO34) },
+    { MP_ROM_QSTR(MP_QSTR_CS), MP_ROM_PTR(&pin_GPIO34) },
+
+    { MP_ROM_QSTR(MP_QSTR_D35), MP_ROM_PTR(&pin_GPIO35) },
+    { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO35) },
+
+    { MP_ROM_QSTR(MP_QSTR_D36), MP_ROM_PTR(&pin_GPIO36) },
+    { MP_ROM_QSTR(MP_QSTR_SCLK), MP_ROM_PTR(&pin_GPIO36) },
+
+    { MP_ROM_QSTR(MP_QSTR_D37), MP_ROM_PTR(&pin_GPIO37) },
+    { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO37) },
+
+    { MP_ROM_QSTR(MP_QSTR_D38), MP_ROM_PTR(&pin_GPIO38) },
+
+    { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_D39), MP_ROM_PTR(&pin_GPIO39) },
+
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

ports/espressif/boards/thingpulse_pendrive_s3/sdkconfig

@@ -0,0 +1,15 @@
+#
+# Espressif IoT Development Framework Configuration
+#
+#
+# Component config
+#
+#
+# LWIP
+#
+CONFIG_LWIP_LOCAL_HOSTNAME="espressif-esp32s3"
+# end of LWIP
+
+# end of Component config
+
+# end of Espressif IoT Development Framework Configuration