jepler/circuitpython
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

docs,ports: Fix SparkFun capitalization.

Browse source 
This is a follow-up to 1e92bdd206 correcting
more of the instances where "Sparkfun" should be "SparkFun".

Signed-off-by: Damien George <damien@micropython.org>
This commit is contained in:
Malcolm McKellips 2025-05-06 16:25:53 -06:00 committed by Damien George
parent bdb7e036d2
commit 288dce26bd
7 changed files with 11 additions and 11 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

8
docs/library/wm8960.rst
View file

@ -358,13 +358,13 @@ Run WM8960 on a MIMXRT10xx_DEV board in secondary mode (default)::
sysclk_source=wm8960.SYSCLK_MCLK)
Record with a Sparkfun WM8960 breakout board with Teensy in secondary mode (default)::
Record with a SparkFun WM8960 breakout board with Teensy in secondary mode (default)::
# Micro_python WM8960 Codec driver
#
# The breakout board uses a fixed 24MHz MCLK. Therefore the internal
# PLL must be used as sysclk, which is the master audio clock.
# The Sparkfun board has the WS pins for RX and TX connected on the
# The SparkFun board has the WS pins for RX and TX connected on the
# board. Therefore adc_sync must be set to sync_adc, to configure
# it's ADCLRC pin as input.
#
@ -379,11 +379,11 @@ Record with a Sparkfun WM8960 breakout board with Teensy in secondary mode (defa
right_input=wm8960.INPUT_CLOSED)
Play with a Sparkfun WM8960 breakout board with Teensy in secondary mode (default)::
Play with a SparkFun WM8960 breakout board with Teensy in secondary mode (default)::
# The breakout board uses a fixed 24MHz MCLK. Therefore the internal
# PLL must be used as sysclk, which is the master audio clock.
# The Sparkfun board has the WS pins for RX and TX connected on the
# The SparkFun board has the WS pins for RX and TX connected on the
# board. Therefore adc_sync must be set to sync_adc, to configure
# it's ADCLRC pin as input.

2
docs/samd/pinout.rst
View file

@ -892,7 +892,7 @@ Default pin assignments:
There seems to be no default pin assignment for this board.
Sparkfun SAMD51 Thing Plus pin assignment table
SparkFun SAMD51 Thing Plus pin assignment table
------------------------------------------------
=== ==== ============ ==== ==== ==== ====== ====== ===== ===== =====

4
ports/samd/boards/SPARKFUN_SAMD51_THING_PLUS/board.json
View file

@ -13,8 +13,8 @@
"sparkfun_samd51_thing_plus.jpg"
],
"mcu": "samd51",
"product": "Sparkfun SAMD51 Thing Plus",
"product": "SparkFun SAMD51 Thing Plus",
"thumbnail": "",
"url": "https://www.sparkfun.com/products/14713",
"vendor": "Sparkfun"
"vendor": "SparkFun"
}

2
ports/samd/boards/SPARKFUN_SAMD51_THING_PLUS/mpconfigboard.h
View file

@ -1,4 +1,4 @@
#define MICROPY_HW_BOARD_NAME "Sparkfun SAMD51 Thing Plus"
#define MICROPY_HW_BOARD_NAME "SparkFun SAMD51 Thing Plus"
#define MICROPY_HW_MCU_NAME "SAMD51J20A"
#define MICROPY_HW_XOSC32K (1)

2
ports/samd/modmachine.c
View file

@ -42,7 +42,7 @@
#define DBL_TAP_ADDR ((volatile uint32_t *)(HSRAM_ADDR + HSRAM_SIZE - 4))
#endif
// A board may define a DPL_TAP_ADDR_ALT, which will be set as well
// Needed at the moment for Sparkfun SAMD51 Thing Plus
// Needed at the moment for SparkFun SAMD51 Thing Plus
#define DBL_TAP_MAGIC_LOADER 0xf01669ef
#define DBL_TAP_MAGIC_RESET 0xf02669ef

2
ports/stm32/boards/SPARKFUN_MICROMOD_STM32/board.json
View file

@ -11,5 +11,5 @@
"product": "Micromod STM32",
"thumbnail": "",
"url": "",
"vendor": "Sparkfun"
"vendor": "SparkFun"
}

2
ports/stm32/boards/SPARKFUN_MICROMOD_STM32/mpconfigboard.h
View file

@ -1,4 +1,4 @@
// The Sparkfun MicroMod spec uses a zero-based peripheral numbering scheme.
// The SparkFun MicroMod spec uses a zero-based peripheral numbering scheme.
// In cases where the 0th peripheral is the default, the "0" is omitted from
// the name (e.g. "I2C" instead of "I2C0").
//