Merge pull request #9530 from djairjr/seeed_xiao_esp32s3
Config that works on Seeed Xiao ESP32S3
This commit is contained in:
Scott Shawcroft
GitHub
commit
8df49424d0
5 changed files with 152 additions and 0 deletions
13
ports/espressif/boards/seeed_xiao_esp32_s3_sense/board.c
Normal file
13
ports/espressif/boards/seeed_xiao_esp32_s3_sense/board.c
Normal file
|
|
@ -0,0 +1,13 @@
|
|||
// This file is part of the CircuitPython project: https://circuitpython.org
|
||||
//
|
||||
// SPDX-FileCopyrightText: Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
|
||||
//
|
||||
// SPDX-License-Identifier: MIT
|
||||
|
||||
#include "supervisor/board.h"
|
||||
#include "mpconfigboard.h"
|
||||
#include "esp_log.h"
|
||||
#include "esp_err.h"
|
||||
#include "driver/i2c.h"
|
||||
|
||||
// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.
|
||||
|
|
@ -0,0 +1,20 @@
|
|||
// This file is part of the CircuitPython project: https://circuitpython.org
|
||||
//
|
||||
// SPDX-FileCopyrightText: Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
|
||||
//
|
||||
// SPDX-License-Identifier: MIT
|
||||
|
||||
// Micropython setup
|
||||
|
||||
#define MICROPY_HW_BOARD_NAME "Seeed Xiao ESP32-S3 Sense"
|
||||
#define MICROPY_HW_MCU_NAME "ESP32S3"
|
||||
|
||||
#define DEFAULT_UART_BUS_RX (&pin_GPIO44)
|
||||
#define DEFAULT_UART_BUS_TX (&pin_GPIO43)
|
||||
|
||||
#define DEFAULT_SPI_BUS_SCK (&pin_GPIO7)
|
||||
#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO9)
|
||||
#define DEFAULT_SPI_BUS_MISO (&pin_GPIO8)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO6)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO5)
|
||||
|
|
@ -0,0 +1,18 @@
|
|||
USB_VID = 0x2886
|
||||
USB_PID = 0x8056
|
||||
|
||||
USB_PRODUCT = "Seeed Xiao ESP32-S3 Sense"
|
||||
USB_MANUFACTURER = "Seeed Studio"
|
||||
|
||||
IDF_TARGET = esp32s3
|
||||
|
||||
CIRCUITPY_ESP_FLASH_MODE = qio
|
||||
CIRCUITPY_ESP_FLASH_SIZE = 8MB
|
||||
CIRCUITPY_ESP_FLASH_FREQ = 80m
|
||||
|
||||
CIRCUITPY_ESP_PSRAM_MODE = opi
|
||||
CIRCUITPY_ESP_PSRAM_SIZE = 8MB
|
||||
CIRCUITPY_ESP_PSRAM_FREQ = 80m
|
||||
|
||||
CIRCUITPY_ESPCAMERA = 1
|
||||
CIRCUITPY_AUDIOBUSIO = 1
|
||||
81
ports/espressif/boards/seeed_xiao_esp32_s3_sense/pins.c
Normal file
81
ports/espressif/boards/seeed_xiao_esp32_s3_sense/pins.c
Normal file
|
|
@ -0,0 +1,81 @@
|
|||
// This file is part of the CircuitPython project: https://circuitpython.org
|
||||
//
|
||||
// SPDX-FileCopyrightText: Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
|
||||
//
|
||||
// SPDX-License-Identifier: MIT
|
||||
|
||||
#include "py/objtuple.h"
|
||||
#include "shared-bindings/board/__init__.h"
|
||||
#include "shared-module/displayio/__init__.h"
|
||||
|
||||
CIRCUITPY_BOARD_BUS_SINGLETON(sscb_i2c, i2c, 2)
|
||||
|
||||
static const mp_rom_obj_tuple_t camera_data_tuple = {
|
||||
// The order matters.
|
||||
// They must be ordered from low to high (CAM_D0, CAM_D1...CAM_D7).
|
||||
|
||||
// Do not include any of the control pins in here.
|
||||
{&mp_type_tuple},
|
||||
8,
|
||||
{
|
||||
MP_ROM_PTR(&pin_GPIO15),
|
||||
MP_ROM_PTR(&pin_GPIO17),
|
||||
MP_ROM_PTR(&pin_GPIO18),
|
||||
MP_ROM_PTR(&pin_GPIO16),
|
||||
MP_ROM_PTR(&pin_GPIO14),
|
||||
MP_ROM_PTR(&pin_GPIO12),
|
||||
MP_ROM_PTR(&pin_GPIO11),
|
||||
MP_ROM_PTR(&pin_GPIO48),
|
||||
}
|
||||
};
|
||||
|
||||
STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
|
||||
CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
|
||||
{ MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_GPIO1) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO2) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO3) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO4) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_GPIO5) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_GPIO6) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_GPIO1) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_GPIO2) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_GPIO3) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_GPIO4) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_GPIO5) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_GPIO6) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_GPIO43) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_GPIO44) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_GPIO7) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_GPIO8) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO9) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO21) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO5) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO6) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO43) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO44) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO9) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO8) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO7) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDCS), MP_ROM_PTR(&pin_GPIO21) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAM_DATA), MP_ROM_PTR(&camera_data_tuple) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAM_D0), MP_ROM_PTR(&pin_GPIO15) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAM_D1), MP_ROM_PTR(&pin_GPIO17) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAM_D2), MP_ROM_PTR(&pin_GPIO18) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAM_D3), MP_ROM_PTR(&pin_GPIO16) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAM_D4), MP_ROM_PTR(&pin_GPIO14) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAM_D5), MP_ROM_PTR(&pin_GPIO12) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAM_D6), MP_ROM_PTR(&pin_GPIO11) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAM_D7), MP_ROM_PTR(&pin_GPIO48) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAM_XCLK), MP_ROM_PTR(&pin_GPIO10) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAM_HREF), MP_ROM_PTR(&pin_GPIO47) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAM_PCLK), MP_ROM_PTR(&pin_GPIO13) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAM_VSYNC), MP_ROM_PTR(&pin_GPIO38) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAM_SCL), MP_ROM_PTR(&pin_GPIO39) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_CAM_SDA), MP_ROM_PTR(&pin_GPIO40) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_MIC_DATA), MP_ROM_PTR(&pin_GPIO41) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_MIC_CLK), MP_ROM_PTR(&pin_GPIO42) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
|
||||
};
|
||||
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);
|
||||
20
ports/espressif/boards/seeed_xiao_esp32_s3_sense/sdkconfig
Normal file
20
ports/espressif/boards/seeed_xiao_esp32_s3_sense/sdkconfig
Normal file
|
|
@ -0,0 +1,20 @@
|
|||
#
|
||||
# Espressif IoT Development Framework Configuration
|
||||
#
|
||||
#
|
||||
# Component config
|
||||
#
|
||||
#
|
||||
# LWIP
|
||||
#
|
||||
CONFIG_LWIP_LOCAL_HOSTNAME="espressif-esp32s3"
|
||||
# end of LWIP
|
||||
# Camera configuration
|
||||
#
|
||||
CONFIG_OV2640_SUPPORT=y
|
||||
# CONFIG_OV7725_SUPPORT is not set
|
||||
# CONFIG_OV3660_SUPPORT is not set
|
||||
# end of Camera configuration
|
||||
# end of Component config
|
||||
|
||||
# end of Espressif IoT Development Framework Configuration
|
||||
Loading…
Reference in a new issue