Merge pull request #9661 from sanhu88/sunton_esp32_8048S050
add Port of Sunton esp32 8048S050
This commit is contained in:
Scott Shawcroft
GitHub
commit
ca99b41d19
5 changed files with 275 additions and 0 deletions
82
ports/espressif/boards/sunton_esp32_8048S050/board.c
Normal file
82
ports/espressif/boards/sunton_esp32_8048S050/board.c
Normal file
|
|
@ -0,0 +1,82 @@
|
|||
// This file is part of the CircuitPython project: https://circuitpython.org
|
||||
//
|
||||
// SPDX-FileCopyrightText: Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
|
||||
//
|
||||
// SPDX-License-Identifier: MIT
|
||||
|
||||
#include "supervisor/board.h"
|
||||
#include "mpconfigboard.h"
|
||||
#include "shared-bindings/board/__init__.h"
|
||||
#include "shared-bindings/dotclockframebuffer/DotClockFramebuffer.h"
|
||||
#include "shared-bindings/dotclockframebuffer/__init__.h"
|
||||
#include "shared-bindings/framebufferio/FramebufferDisplay.h"
|
||||
#include "shared-bindings/microcontroller/Pin.h"
|
||||
#include "shared-module/displayio/__init__.h"
|
||||
|
||||
static const mcu_pin_obj_t *blue_pins[] = {
|
||||
&pin_GPIO8,
|
||||
&pin_GPIO3,
|
||||
&pin_GPIO46,
|
||||
&pin_GPIO9,
|
||||
&pin_GPIO1
|
||||
};
|
||||
static const mcu_pin_obj_t *green_pins[] = {
|
||||
&pin_GPIO5,
|
||||
&pin_GPIO6,
|
||||
&pin_GPIO7,
|
||||
&pin_GPIO15,
|
||||
&pin_GPIO16,
|
||||
&pin_GPIO4
|
||||
};
|
||||
static const mcu_pin_obj_t *red_pins[] = {
|
||||
&pin_GPIO45,
|
||||
&pin_GPIO48,
|
||||
&pin_GPIO47,
|
||||
&pin_GPIO21,
|
||||
&pin_GPIO14
|
||||
};
|
||||
|
||||
static void display_init(void) {
|
||||
|
||||
// Turn on backlight
|
||||
gpio_set_direction(2, GPIO_MODE_DEF_OUTPUT);
|
||||
gpio_set_level(2, true);
|
||||
common_hal_never_reset_pin(&pin_GPIO2);
|
||||
|
||||
dotclockframebuffer_framebuffer_obj_t *framebuffer = &allocate_display_bus_or_raise()->dotclock;
|
||||
framebuffer->base.type = &dotclockframebuffer_framebuffer_type;
|
||||
|
||||
common_hal_dotclockframebuffer_framebuffer_construct(
|
||||
framebuffer,
|
||||
&pin_GPIO40, // de
|
||||
&pin_GPIO41, // vsync
|
||||
&pin_GPIO39, // hsync
|
||||
&pin_GPIO42, // pclk
|
||||
red_pins, MP_ARRAY_SIZE(red_pins),
|
||||
green_pins, MP_ARRAY_SIZE(green_pins),
|
||||
blue_pins, MP_ARRAY_SIZE(blue_pins),
|
||||
12500000, // Frequency
|
||||
800, // width
|
||||
480, // height
|
||||
4, 8, 8, true, // horiz: pulse, back porch, front porch, idle low
|
||||
4, 8, 8, true, // vert: pulse, back porch, front porch, idle low
|
||||
false, // DE idle high
|
||||
false, // pclk active high
|
||||
false, // pclk idle high
|
||||
0 // overscan left
|
||||
);
|
||||
|
||||
framebufferio_framebufferdisplay_obj_t *display = &allocate_display_or_raise()->framebuffer_display;
|
||||
display->base.type = &framebufferio_framebufferdisplay_type;
|
||||
common_hal_framebufferio_framebufferdisplay_construct(
|
||||
display,
|
||||
framebuffer,
|
||||
0, // rotation
|
||||
true // auto-refresh
|
||||
);
|
||||
}
|
||||
|
||||
void board_init(void) {
|
||||
display_init();
|
||||
}
|
||||
// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.
|
||||
23
ports/espressif/boards/sunton_esp32_8048S050/mpconfigboard.h
Normal file
23
ports/espressif/boards/sunton_esp32_8048S050/mpconfigboard.h
Normal file
|
|
@ -0,0 +1,23 @@
|
|||
// This file is part of the CircuitPython project: https://circuitpython.org
|
||||
//
|
||||
// SPDX-FileCopyrightText: Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
|
||||
//
|
||||
// SPDX-License-Identifier: MIT
|
||||
|
||||
#pragma once
|
||||
|
||||
// Micropython setup
|
||||
|
||||
#define MICROPY_HW_BOARD_NAME "Sunton-ESP32-8048S050"
|
||||
#define MICROPY_HW_MCU_NAME "ESP32S3"
|
||||
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO19)
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO20)
|
||||
|
||||
#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO11)
|
||||
#define DEFAULT_SPI_BUS_SCK (&pin_GPIO12)
|
||||
#define DEFAULT_SPI_BUS_MISO (&pin_GPIO13)
|
||||
|
||||
// UART pins attached to the USB-serial converter chip
|
||||
#define CIRCUITPY_CONSOLE_UART_TX (&pin_GPIO43)
|
||||
#define CIRCUITPY_CONSOLE_UART_RX (&pin_GPIO44)
|
||||
|
|
@ -0,0 +1,19 @@
|
|||
CIRCUITPY_CREATOR_ID = 0x19991000
|
||||
CIRCUITPY_CREATION_ID = 0x00AA0050
|
||||
|
||||
# This board doesn't have USB by default, it
|
||||
# instead uses a CH340C USB-to-Serial chip
|
||||
CIRCUITPY_USB_DEVICE = 0
|
||||
CIRCUITPY_ESP_USB_SERIAL_JTAG = 0
|
||||
|
||||
IDF_TARGET = esp32s3
|
||||
|
||||
CIRCUITPY_ESP_FLASH_MODE = qio
|
||||
CIRCUITPY_ESP_FLASH_FREQ = 80m
|
||||
CIRCUITPY_ESP_FLASH_SIZE = 16MB
|
||||
|
||||
CIRCUITPY_ESP_PSRAM_SIZE = 8MB
|
||||
CIRCUITPY_ESP_PSRAM_MODE = opi
|
||||
CIRCUITPY_ESP_PSRAM_FREQ = 80m
|
||||
|
||||
CIRCUITPY_DOTCLOCKFRAMEBUFFER = 1
|
||||
136
ports/espressif/boards/sunton_esp32_8048S050/pins.c
Normal file
136
ports/espressif/boards/sunton_esp32_8048S050/pins.c
Normal file
|
|
@ -0,0 +1,136 @@
|
|||
// This file is part of the CircuitPython project: https://circuitpython.org
|
||||
//
|
||||
// SPDX-FileCopyrightText: Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
|
||||
//
|
||||
// SPDX-License-Identifier: MIT
|
||||
|
||||
#include "py/objtuple.h"
|
||||
#include "shared-bindings/board/__init__.h"
|
||||
#include "shared-module/displayio/__init__.h"
|
||||
|
||||
static const mp_rom_obj_tuple_t tft_r_pins = {
|
||||
{&mp_type_tuple},
|
||||
5,
|
||||
{
|
||||
MP_ROM_PTR(&pin_GPIO45),
|
||||
MP_ROM_PTR(&pin_GPIO48),
|
||||
MP_ROM_PTR(&pin_GPIO47),
|
||||
MP_ROM_PTR(&pin_GPIO21),
|
||||
MP_ROM_PTR(&pin_GPIO14),
|
||||
}
|
||||
};
|
||||
|
||||
static const mp_rom_obj_tuple_t tft_g_pins = {
|
||||
{&mp_type_tuple},
|
||||
6,
|
||||
{
|
||||
MP_ROM_PTR(&pin_GPIO5),
|
||||
MP_ROM_PTR(&pin_GPIO6),
|
||||
MP_ROM_PTR(&pin_GPIO7),
|
||||
MP_ROM_PTR(&pin_GPIO15),
|
||||
MP_ROM_PTR(&pin_GPIO16),
|
||||
MP_ROM_PTR(&pin_GPIO4),
|
||||
}
|
||||
};
|
||||
|
||||
static const mp_rom_obj_tuple_t tft_b_pins = {
|
||||
{&mp_type_tuple},
|
||||
5,
|
||||
{
|
||||
MP_ROM_PTR(&pin_GPIO8),
|
||||
MP_ROM_PTR(&pin_GPIO3),
|
||||
MP_ROM_PTR(&pin_GPIO46),
|
||||
MP_ROM_PTR(&pin_GPIO9),
|
||||
MP_ROM_PTR(&pin_GPIO1),
|
||||
}
|
||||
};
|
||||
|
||||
static const mp_rom_map_elem_t tft_pins_table[] = {
|
||||
{ MP_ROM_QSTR(MP_QSTR_de), MP_ROM_PTR(&pin_GPIO40) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_vsync), MP_ROM_PTR(&pin_GPIO41) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_hsync), MP_ROM_PTR(&pin_GPIO39) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_dclk), MP_ROM_PTR(&pin_GPIO42) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_red), MP_ROM_PTR(&tft_r_pins) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_green), MP_ROM_PTR(&tft_g_pins) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_blue), MP_ROM_PTR(&tft_b_pins) },
|
||||
};
|
||||
MP_DEFINE_CONST_DICT(tft_pins_dict, tft_pins_table);
|
||||
|
||||
static const mp_rom_map_elem_t timings_table[] = {
|
||||
{ MP_ROM_QSTR(MP_QSTR_frequency), MP_ROM_INT(12500000) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_width), MP_ROM_INT(800) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_height), MP_ROM_INT(480) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_hsync_pulse_width), MP_ROM_INT(4) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_hsync_back_porch), MP_ROM_INT(8) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_hsync_front_porch), MP_ROM_INT(8) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_hsync_idle_low), MP_ROM_TRUE },
|
||||
{ MP_ROM_QSTR(MP_QSTR_vsync_pulse_width), MP_ROM_INT(4) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_vsync_back_porch), MP_ROM_INT(8) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_vsync_front_porch), MP_ROM_INT(8) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_vsync_idle_low), MP_ROM_TRUE },
|
||||
{ MP_ROM_QSTR(MP_QSTR_de_idle_high), MP_ROM_FALSE },
|
||||
{ MP_ROM_QSTR(MP_QSTR_pclk_active_high), MP_ROM_FALSE },
|
||||
{ MP_ROM_QSTR(MP_QSTR_pclk_idle_high), MP_ROM_FALSE },
|
||||
|
||||
};
|
||||
MP_DEFINE_CONST_DICT(timings_dict, timings_table);
|
||||
|
||||
static const mp_rom_map_elem_t board_module_globals_table[] = {
|
||||
CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
|
||||
|
||||
// Display constructs
|
||||
{ MP_ROM_QSTR(MP_QSTR_TFT_PINS), MP_ROM_PTR(&tft_pins_dict) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_TFT_TIMINGS), MP_ROM_PTR(&timings_dict) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_TFT_BACKLIGHT), MP_ROM_PTR(&pin_GPIO2) },
|
||||
|
||||
// User buttons
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO0), MP_ROM_PTR(&pin_GPIO0) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_BOOT0), MP_ROM_PTR(&pin_GPIO0) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_BUTTON), MP_ROM_PTR(&pin_GPIO0) },
|
||||
|
||||
// User accessible GPIO
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO19), MP_ROM_PTR(&pin_GPIO19) }, // P2, External SPI plug
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO11), MP_ROM_PTR(&pin_GPIO11) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO20), MP_ROM_PTR(&pin_GPIO20) }, // P3 has 19&20 for I2C bus, plus 17&18
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO17), MP_ROM_PTR(&pin_GPIO17) }, // P4 & P5 are both 17,18,3.3v,G
|
||||
{ MP_ROM_QSTR(MP_QSTR_IO18), MP_ROM_PTR(&pin_GPIO18) },
|
||||
|
||||
// UART pins
|
||||
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO43) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO44) },
|
||||
|
||||
// I2C
|
||||
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO19) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO20) },
|
||||
|
||||
// SPI
|
||||
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO11) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO12) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO13) },
|
||||
|
||||
// i2s amplifier
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2S_BIT_CLOCK), MP_ROM_PTR(&pin_GPIO0) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2S_WORD_SELECT), MP_ROM_PTR(&pin_GPIO18) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2S_DATA), MP_ROM_PTR(&pin_GPIO17) },
|
||||
|
||||
// Touch (GT911 I2C, XPT2046 SPI)
|
||||
// There are two versions of this tablet, one with capacitive touch
|
||||
// one with resistive. They use their respective bus as defined,
|
||||
// with GPIO38 being reset on capacitive and cs on resistive.
|
||||
{ MP_ROM_QSTR(MP_QSTR_TOUCH_RESET), MP_ROM_PTR(&pin_GPIO38) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_TOUCH_CS), MP_ROM_PTR(&pin_GPIO38) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_TOUCH_INT), MP_ROM_PTR(&pin_GPIO18) },
|
||||
|
||||
// SD Slot (SPI)
|
||||
{ MP_ROM_QSTR(MP_QSTR_SD_CS), MP_ROM_PTR(&pin_GPIO10) },
|
||||
|
||||
// Objects
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].display)},
|
||||
};
|
||||
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);
|
||||
15
ports/espressif/boards/sunton_esp32_8048S050/sdkconfig
Normal file
15
ports/espressif/boards/sunton_esp32_8048S050/sdkconfig
Normal file
|
|
@ -0,0 +1,15 @@
|
|||
#
|
||||
# Espressif IoT Development Framework Configuration
|
||||
#
|
||||
#
|
||||
# Component config
|
||||
#
|
||||
#
|
||||
# LWIP
|
||||
#
|
||||
CONFIG_LWIP_LOCAL_HOSTNAME="sunton-esp32-8048S050"
|
||||
# end of LWIP
|
||||
|
||||
# end of Component config
|
||||
|
||||
# end of Espressif IoT Development Framework Configuration
|
||||
Loading…
Reference in a new issue