diff --git a/locale/ID.po b/locale/ID.po
index b53f90a2ec..213537ea56 100644
--- a/locale/ID.po
+++ b/locale/ID.po
@@ -2347,10 +2347,6 @@ msgstr "Panjang nilai > max_length"
 msgid "Version was invalid"
 msgstr ""
 
-#: py/emitnative.c
-msgid "Viper functions don't currently support more than 4 arguments"
-msgstr "Fungsi Viper saat ini tidak mendukung lebih dari 4 argumen"
-
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Voltage read timed out"
 msgstr "Tegangan baca habis waktu"
@@ -2436,11 +2432,6 @@ msgstr "sebuah objek menyerupai byte (bytes-like) dibutuhkan"
 msgid "abort() called"
 msgstr "abort() dipanggil"
 
-#: extmod/machine_mem.c
-#, c-format
-msgid "address %08x is not aligned to %d bytes"
-msgstr "alamat %08x tidak selaras dengan %d bytes"
-
 #: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr "alamat di luar batas"
@@ -2449,6 +2440,10 @@ msgstr "alamat di luar batas"
 msgid "addresses is empty"
 msgstr "alamatnya kosong"
 
+#: py/compile.c
+msgid "annotation must be an identifier"
+msgstr ""
+
 #: py/modbuiltins.c
 msgid "arg is an empty sequence"
 msgstr "arg berisi urutan kosong"
@@ -2631,6 +2626,10 @@ msgstr "tidak dapat menetapkan ke ekspresi"
 msgid "can't convert %q to %q"
 msgstr ""
 
+#: py/runtime.c
+msgid "can't convert %q to int"
+msgstr ""
+
 #: py/objstr.c
 msgid "can't convert '%q' object to %q implicitly"
 msgstr ""
@@ -2639,6 +2638,10 @@ msgstr ""
 msgid "can't convert to %q"
 msgstr ""
 
+#: py/runtime.c
+msgid "can't convert to int"
+msgstr ""
+
 #: py/objstr.c
 msgid "can't convert to str implicitly"
 msgstr ""
@@ -3042,8 +3045,8 @@ msgid "full"
 msgstr ""
 
 #: py/argcheck.c
-msgid "function does not take keyword arguments"
-msgstr "fungsi tidak dapat mengambil argumen keyword"
+msgid "function doesn't take keyword arguments"
+msgstr ""
 
 #: py/argcheck.c
 #, c-format
@@ -3097,6 +3100,10 @@ msgstr ""
 msgid "generator ignored GeneratorExit"
 msgstr ""
 
+#: py/objgenerator.c
+msgid "generator raised StopIteration"
+msgstr ""
+
 #: shared-bindings/_stage/Layer.c
 msgid "graphic must be 2048 bytes long"
 msgstr ""
@@ -3476,6 +3483,10 @@ msgstr ""
 msgid "need more than %d values to unpack"
 msgstr ""
 
+#: py/modmath.c
+msgid "negative factorial"
+msgstr ""
+
 #: py/objint_longlong.c py/objint_mpz.c py/runtime.c
 msgid "negative power with no float support"
 msgstr ""
@@ -3706,10 +3717,6 @@ msgstr ""
 msgid "palette_index should be an int"
 msgstr ""
 
-#: py/compile.c
-msgid "parameter annotation must be an identifier"
-msgstr "anotasi parameter haruse sebuah identifier"
-
 #: py/emitinlinextensa.c
 msgid "parameters must be registers in sequence a2 to a5"
 msgstr ""
@@ -3765,6 +3772,7 @@ msgstr ""
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/artisense_rd00/mpconfigboard.h
+#: ports/esp32s2/boards/atmegazero_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -4148,7 +4156,7 @@ msgstr ""
 msgid "unknown type"
 msgstr "tipe tidak diketahui"
 
-#: py/emitnative.c
+#: py/compile.c
 msgid "unknown type '%q'"
 msgstr ""
 
@@ -4287,6 +4295,18 @@ msgstr "zi harus berjenis float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "Viper functions don't currently support more than 4 arguments"
+#~ msgstr "Fungsi Viper saat ini tidak mendukung lebih dari 4 argumen"
+
+#~ msgid "address %08x is not aligned to %d bytes"
+#~ msgstr "alamat %08x tidak selaras dengan %d bytes"
+
+#~ msgid "function does not take keyword arguments"
+#~ msgstr "fungsi tidak dapat mengambil argumen keyword"
+
+#~ msgid "parameter annotation must be an identifier"
+#~ msgstr "anotasi parameter haruse sebuah identifier"
+
 #~ msgid "Total data to write is larger than outgoing_packet_length"
 #~ msgstr ""
 #~ "Total data yang akan ditulis lebih besar daripada outgoing_packet_length"
diff --git a/locale/cs.po b/locale/cs.po
index 7309631648..874f0bf329 100644
--- a/locale/cs.po
+++ b/locale/cs.po
@@ -2307,10 +2307,6 @@ msgstr ""
 msgid "Version was invalid"
 msgstr ""
 
-#: py/emitnative.c
-msgid "Viper functions don't currently support more than 4 arguments"
-msgstr ""
-
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Voltage read timed out"
 msgstr ""
@@ -2390,11 +2386,6 @@ msgstr ""
 msgid "abort() called"
 msgstr ""
 
-#: extmod/machine_mem.c
-#, c-format
-msgid "address %08x is not aligned to %d bytes"
-msgstr ""
-
 #: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr ""
@@ -2403,6 +2394,10 @@ msgstr ""
 msgid "addresses is empty"
 msgstr ""
 
+#: py/compile.c
+msgid "annotation must be an identifier"
+msgstr ""
+
 #: py/modbuiltins.c
 msgid "arg is an empty sequence"
 msgstr ""
@@ -2585,6 +2580,10 @@ msgstr ""
 msgid "can't convert %q to %q"
 msgstr ""
 
+#: py/runtime.c
+msgid "can't convert %q to int"
+msgstr ""
+
 #: py/objstr.c
 msgid "can't convert '%q' object to %q implicitly"
 msgstr ""
@@ -2593,6 +2592,10 @@ msgstr ""
 msgid "can't convert to %q"
 msgstr ""
 
+#: py/runtime.c
+msgid "can't convert to int"
+msgstr ""
+
 #: py/objstr.c
 msgid "can't convert to str implicitly"
 msgstr ""
@@ -2996,7 +2999,7 @@ msgid "full"
 msgstr ""
 
 #: py/argcheck.c
-msgid "function does not take keyword arguments"
+msgid "function doesn't take keyword arguments"
 msgstr ""
 
 #: py/argcheck.c
@@ -3051,6 +3054,10 @@ msgstr ""
 msgid "generator ignored GeneratorExit"
 msgstr ""
 
+#: py/objgenerator.c
+msgid "generator raised StopIteration"
+msgstr ""
+
 #: shared-bindings/_stage/Layer.c
 msgid "graphic must be 2048 bytes long"
 msgstr ""
@@ -3430,6 +3437,10 @@ msgstr ""
 msgid "need more than %d values to unpack"
 msgstr ""
 
+#: py/modmath.c
+msgid "negative factorial"
+msgstr ""
+
 #: py/objint_longlong.c py/objint_mpz.c py/runtime.c
 msgid "negative power with no float support"
 msgstr ""
@@ -3659,10 +3670,6 @@ msgstr ""
 msgid "palette_index should be an int"
 msgstr ""
 
-#: py/compile.c
-msgid "parameter annotation must be an identifier"
-msgstr ""
-
 #: py/emitinlinextensa.c
 msgid "parameters must be registers in sequence a2 to a5"
 msgstr ""
@@ -3718,6 +3725,7 @@ msgstr ""
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/artisense_rd00/mpconfigboard.h
+#: ports/esp32s2/boards/atmegazero_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -4101,7 +4109,7 @@ msgstr ""
 msgid "unknown type"
 msgstr ""
 
-#: py/emitnative.c
+#: py/compile.c
 msgid "unknown type '%q'"
 msgstr ""
 
diff --git a/locale/de_DE.po b/locale/de_DE.po
index 1b82d6fe63..d59651ef3e 100644
--- a/locale/de_DE.po
+++ b/locale/de_DE.po
@@ -2355,10 +2355,6 @@ msgstr "Länge des Wertes > max_length"
 msgid "Version was invalid"
 msgstr ""
 
-#: py/emitnative.c
-msgid "Viper functions don't currently support more than 4 arguments"
-msgstr "Viper-Funktionen unterstützen derzeit nicht mehr als 4 Argumente"
-
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Voltage read timed out"
 msgstr "Zeitüberschreitung beim Lesen der Spannung"
@@ -2449,11 +2445,6 @@ msgstr "ein Byte-ähnliches Objekt ist erforderlich"
 msgid "abort() called"
 msgstr "abort() wurde aufgerufen"
 
-#: extmod/machine_mem.c
-#, c-format
-msgid "address %08x is not aligned to %d bytes"
-msgstr "Addresse %08x ist nicht an %d bytes ausgerichtet"
-
 #: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr "Adresse außerhalb der Grenzen"
@@ -2462,6 +2453,10 @@ msgstr "Adresse außerhalb der Grenzen"
 msgid "addresses is empty"
 msgstr "adresses ist leer"
 
+#: py/compile.c
+msgid "annotation must be an identifier"
+msgstr ""
+
 #: py/modbuiltins.c
 msgid "arg is an empty sequence"
 msgstr "arg ist eine leere Sequenz"
@@ -2646,6 +2641,10 @@ msgstr "kann keinem Ausdruck zuweisen"
 msgid "can't convert %q to %q"
 msgstr "kann %q nicht zu %q konvertieren"
 
+#: py/runtime.c
+msgid "can't convert %q to int"
+msgstr ""
+
 #: py/objstr.c
 msgid "can't convert '%q' object to %q implicitly"
 msgstr "Kann '%q' Objekt nicht implizit nach %q konvertieren"
@@ -2654,6 +2653,10 @@ msgstr "Kann '%q' Objekt nicht implizit nach %q konvertieren"
 msgid "can't convert to %q"
 msgstr "kann nicht zu %q konvertieren"
 
+#: py/runtime.c
+msgid "can't convert to int"
+msgstr "kann nicht nach int konvertieren"
+
 #: py/objstr.c
 msgid "can't convert to str implicitly"
 msgstr "Kann nicht implizit nach str konvertieren"
@@ -3067,8 +3070,8 @@ msgid "full"
 msgstr "voll"
 
 #: py/argcheck.c
-msgid "function does not take keyword arguments"
-msgstr "Funktion akzeptiert keine Schlüsselwort-Argumente"
+msgid "function doesn't take keyword arguments"
+msgstr ""
 
 #: py/argcheck.c
 #, c-format
@@ -3124,6 +3127,10 @@ msgstr "Generator läuft bereits"
 msgid "generator ignored GeneratorExit"
 msgstr "Generator ignoriert GeneratorExit"
 
+#: py/objgenerator.c
+msgid "generator raised StopIteration"
+msgstr ""
+
 #: shared-bindings/_stage/Layer.c
 msgid "graphic must be 2048 bytes long"
 msgstr "graphic muss 2048 Byte lang sein"
@@ -3509,6 +3516,10 @@ msgstr "native Ausbeute (yield)"
 msgid "need more than %d values to unpack"
 msgstr "Zum Entpacken sind mehr als %d Werte erforderlich"
 
+#: py/modmath.c
+msgid "negative factorial"
+msgstr ""
+
 #: py/objint_longlong.c py/objint_mpz.c py/runtime.c
 msgid "negative power with no float support"
 msgstr "negative Potenz ohne Gleitkomma (float) Unterstützung"
@@ -3742,10 +3753,6 @@ msgstr "Die Palette muss 32 Byte lang sein"
 msgid "palette_index should be an int"
 msgstr "palette_index sollte ein int sein"
 
-#: py/compile.c
-msgid "parameter annotation must be an identifier"
-msgstr "parameter annotation muss ein identifier sein"
-
 #: py/emitinlinextensa.c
 msgid "parameters must be registers in sequence a2 to a5"
 msgstr "Die Parameter müssen Register der Reihenfolge a2 bis a5 sein"
@@ -3801,6 +3808,7 @@ msgstr "pow () mit 3 Argumenten erfordert Integer"
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/artisense_rd00/mpconfigboard.h
+#: ports/esp32s2/boards/atmegazero_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -4191,7 +4199,7 @@ msgstr "Unbekannter Formatcode '%c' für Objekt vom Typ '%q'"
 msgid "unknown type"
 msgstr "unbekannter Typ"
 
-#: py/emitnative.c
+#: py/compile.c
 msgid "unknown type '%q'"
 msgstr "unbekannter Typ '%q'"
 
@@ -4330,6 +4338,18 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "Viper functions don't currently support more than 4 arguments"
+#~ msgstr "Viper-Funktionen unterstützen derzeit nicht mehr als 4 Argumente"
+
+#~ msgid "address %08x is not aligned to %d bytes"
+#~ msgstr "Addresse %08x ist nicht an %d bytes ausgerichtet"
+
+#~ msgid "function does not take keyword arguments"
+#~ msgstr "Funktion akzeptiert keine Schlüsselwort-Argumente"
+
+#~ msgid "parameter annotation must be an identifier"
+#~ msgstr "parameter annotation muss ein identifier sein"
+
 #~ msgid "Total data to write is larger than outgoing_packet_length"
 #~ msgstr ""
 #~ "Die Gesamtzahl der zu schreibenden Daten ist größer als "
@@ -4563,9 +4583,6 @@ msgstr ""
 #~ msgid "can't convert to float"
 #~ msgstr "kann nicht nach float konvertieren"
 
-#~ msgid "can't convert to int"
-#~ msgstr "kann nicht nach int konvertieren"
-
 #~ msgid "object '%s' is not a tuple or list"
 #~ msgstr "Objekt '%s' ist weder tupel noch list"
 
diff --git a/locale/el.po b/locale/el.po
index 6756eff864..93d1c14efe 100644
--- a/locale/el.po
+++ b/locale/el.po
@@ -2304,10 +2304,6 @@ msgstr ""
 msgid "Version was invalid"
 msgstr ""
 
-#: py/emitnative.c
-msgid "Viper functions don't currently support more than 4 arguments"
-msgstr ""
-
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Voltage read timed out"
 msgstr ""
@@ -2387,11 +2383,6 @@ msgstr ""
 msgid "abort() called"
 msgstr ""
 
-#: extmod/machine_mem.c
-#, c-format
-msgid "address %08x is not aligned to %d bytes"
-msgstr ""
-
 #: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr ""
@@ -2400,6 +2391,10 @@ msgstr ""
 msgid "addresses is empty"
 msgstr ""
 
+#: py/compile.c
+msgid "annotation must be an identifier"
+msgstr ""
+
 #: py/modbuiltins.c
 msgid "arg is an empty sequence"
 msgstr ""
@@ -2582,6 +2577,10 @@ msgstr ""
 msgid "can't convert %q to %q"
 msgstr ""
 
+#: py/runtime.c
+msgid "can't convert %q to int"
+msgstr ""
+
 #: py/objstr.c
 msgid "can't convert '%q' object to %q implicitly"
 msgstr ""
@@ -2590,6 +2589,10 @@ msgstr ""
 msgid "can't convert to %q"
 msgstr ""
 
+#: py/runtime.c
+msgid "can't convert to int"
+msgstr ""
+
 #: py/objstr.c
 msgid "can't convert to str implicitly"
 msgstr ""
@@ -2993,7 +2996,7 @@ msgid "full"
 msgstr ""
 
 #: py/argcheck.c
-msgid "function does not take keyword arguments"
+msgid "function doesn't take keyword arguments"
 msgstr ""
 
 #: py/argcheck.c
@@ -3048,6 +3051,10 @@ msgstr ""
 msgid "generator ignored GeneratorExit"
 msgstr ""
 
+#: py/objgenerator.c
+msgid "generator raised StopIteration"
+msgstr ""
+
 #: shared-bindings/_stage/Layer.c
 msgid "graphic must be 2048 bytes long"
 msgstr ""
@@ -3427,6 +3434,10 @@ msgstr ""
 msgid "need more than %d values to unpack"
 msgstr ""
 
+#: py/modmath.c
+msgid "negative factorial"
+msgstr ""
+
 #: py/objint_longlong.c py/objint_mpz.c py/runtime.c
 msgid "negative power with no float support"
 msgstr ""
@@ -3656,10 +3667,6 @@ msgstr ""
 msgid "palette_index should be an int"
 msgstr ""
 
-#: py/compile.c
-msgid "parameter annotation must be an identifier"
-msgstr ""
-
 #: py/emitinlinextensa.c
 msgid "parameters must be registers in sequence a2 to a5"
 msgstr ""
@@ -3715,6 +3722,7 @@ msgstr ""
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/artisense_rd00/mpconfigboard.h
+#: ports/esp32s2/boards/atmegazero_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -4098,7 +4106,7 @@ msgstr ""
 msgid "unknown type"
 msgstr ""
 
-#: py/emitnative.c
+#: py/compile.c
 msgid "unknown type '%q'"
 msgstr ""
 
diff --git a/locale/en_GB.po b/locale/en_GB.po
index 7cc439d3ed..f3fd1e71ad 100644
--- a/locale/en_GB.po
+++ b/locale/en_GB.po
@@ -2343,10 +2343,6 @@ msgstr "Value length > max_length"
 msgid "Version was invalid"
 msgstr "Version was invalid"
 
-#: py/emitnative.c
-msgid "Viper functions don't currently support more than 4 arguments"
-msgstr "Viper functions don't currently support more than 4 arguments"
-
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Voltage read timed out"
 msgstr "Voltage read timed out"
@@ -2431,11 +2427,6 @@ msgstr "a bytes-like object is required"
 msgid "abort() called"
 msgstr "abort() called"
 
-#: extmod/machine_mem.c
-#, c-format
-msgid "address %08x is not aligned to %d bytes"
-msgstr "address %08x is not aligned to %d bytes"
-
 #: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr "address out of bounds"
@@ -2444,6 +2435,10 @@ msgstr "address out of bounds"
 msgid "addresses is empty"
 msgstr "addresses is empty"
 
+#: py/compile.c
+msgid "annotation must be an identifier"
+msgstr ""
+
 #: py/modbuiltins.c
 msgid "arg is an empty sequence"
 msgstr "arg is an empty sequence"
@@ -2626,6 +2621,10 @@ msgstr "Can't assign to expression"
 msgid "can't convert %q to %q"
 msgstr "Can't convert %q to %q"
 
+#: py/runtime.c
+msgid "can't convert %q to int"
+msgstr ""
+
 #: py/objstr.c
 msgid "can't convert '%q' object to %q implicitly"
 msgstr "Can't convert '%q' object to %q implicitly"
@@ -2634,6 +2633,10 @@ msgstr "Can't convert '%q' object to %q implicitly"
 msgid "can't convert to %q"
 msgstr "Can't convert to %q"
 
+#: py/runtime.c
+msgid "can't convert to int"
+msgstr ""
+
 #: py/objstr.c
 msgid "can't convert to str implicitly"
 msgstr "Can't convert to str implicitly"
@@ -3040,8 +3043,8 @@ msgid "full"
 msgstr "full"
 
 #: py/argcheck.c
-msgid "function does not take keyword arguments"
-msgstr "function does not take keyword arguments"
+msgid "function doesn't take keyword arguments"
+msgstr ""
 
 #: py/argcheck.c
 #, c-format
@@ -3095,6 +3098,10 @@ msgstr "generator already executing"
 msgid "generator ignored GeneratorExit"
 msgstr "generator ignored GeneratorExit"
 
+#: py/objgenerator.c
+msgid "generator raised StopIteration"
+msgstr ""
+
 #: shared-bindings/_stage/Layer.c
 msgid "graphic must be 2048 bytes long"
 msgstr "graphic must be 2048 bytes long"
@@ -3475,6 +3482,10 @@ msgstr "native yield"
 msgid "need more than %d values to unpack"
 msgstr "need more than %d values to unpack"
 
+#: py/modmath.c
+msgid "negative factorial"
+msgstr ""
+
 #: py/objint_longlong.c py/objint_mpz.c py/runtime.c
 msgid "negative power with no float support"
 msgstr "negative power with no float support"
@@ -3704,10 +3715,6 @@ msgstr "palette must be 32 bytes long"
 msgid "palette_index should be an int"
 msgstr "palette_index should be an int"
 
-#: py/compile.c
-msgid "parameter annotation must be an identifier"
-msgstr "parameter annotation must be an identifier"
-
 #: py/emitinlinextensa.c
 msgid "parameters must be registers in sequence a2 to a5"
 msgstr "parameters must be registers in sequence a2 to a5"
@@ -3763,6 +3770,7 @@ msgstr "pow() with 3 arguments requires integers"
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/artisense_rd00/mpconfigboard.h
+#: ports/esp32s2/boards/atmegazero_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -4148,7 +4156,7 @@ msgstr "unknown format code '%c' for object of type '%q'"
 msgid "unknown type"
 msgstr "unknown type"
 
-#: py/emitnative.c
+#: py/compile.c
 msgid "unknown type '%q'"
 msgstr "unknown type '%q'"
 
@@ -4287,6 +4295,18 @@ msgstr "zi must be of float type"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi must be of shape (n_section, 2)"
 
+#~ msgid "Viper functions don't currently support more than 4 arguments"
+#~ msgstr "Viper functions don't currently support more than 4 arguments"
+
+#~ msgid "address %08x is not aligned to %d bytes"
+#~ msgstr "address %08x is not aligned to %d bytes"
+
+#~ msgid "function does not take keyword arguments"
+#~ msgstr "function does not take keyword arguments"
+
+#~ msgid "parameter annotation must be an identifier"
+#~ msgstr "parameter annotation must be an identifier"
+
 #~ msgid "Total data to write is larger than outgoing_packet_length"
 #~ msgstr "Total data to write is larger than outgoing_packet_length"
 
diff --git a/locale/es.po b/locale/es.po
index 7cc4fa9397..2b0538e8b3 100644
--- a/locale/es.po
+++ b/locale/es.po
@@ -8,15 +8,15 @@ msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2021-04-15 14:26+0000\n"
-"Last-Translator: Alvaro Figueroa <alvaro@greencore.co.cr>\n"
+"PO-Revision-Date: 2021-04-22 17:16+0000\n"
+"Last-Translator: Jose David M <jquintana202020@gmail.com>\n"
 "Language-Team: \n"
 "Language: es\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=n != 1;\n"
-"X-Generator: Weblate 4.6-dev\n"
+"X-Generator: Weblate 4.7-dev\n"
 
 #: main.c
 msgid ""
@@ -2199,7 +2199,7 @@ msgstr "Muchos displays"
 
 #: ports/nrf/common-hal/_bleio/PacketBuffer.c
 msgid "Total data to write is larger than %q"
-msgstr ""
+msgstr "La cantidad total de datos es mas grande que %q"
 
 #: py/obj.c
 msgid "Traceback (most recent call last):\n"
@@ -2372,10 +2372,6 @@ msgstr "Tamaño de valor > max_length"
 msgid "Version was invalid"
 msgstr "La versión era invalida"
 
-#: py/emitnative.c
-msgid "Viper functions don't currently support more than 4 arguments"
-msgstr "funciones Viper no soportan por el momento, más de 4 argumentos"
-
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Voltage read timed out"
 msgstr "Tiempo de espera agotado para lectura de voltaje"
@@ -2464,11 +2460,6 @@ msgstr "se requiere un objeto bytes-like"
 msgid "abort() called"
 msgstr "se llamó abort()"
 
-#: extmod/machine_mem.c
-#, c-format
-msgid "address %08x is not aligned to %d bytes"
-msgstr "la dirección %08x no esta alineada a %d bytes"
-
 #: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr "address fuera de límites"
@@ -2477,6 +2468,10 @@ msgstr "address fuera de límites"
 msgid "addresses is empty"
 msgstr "addresses esta vacío"
 
+#: py/compile.c
+msgid "annotation must be an identifier"
+msgstr ""
+
 #: py/modbuiltins.c
 msgid "arg is an empty sequence"
 msgstr "argumento es una secuencia vacía"
@@ -2659,6 +2654,10 @@ msgstr "no se puede asignar a la expresión"
 msgid "can't convert %q to %q"
 msgstr "no puede convertir %q a %q"
 
+#: py/runtime.c
+msgid "can't convert %q to int"
+msgstr ""
+
 #: py/objstr.c
 msgid "can't convert '%q' object to %q implicitly"
 msgstr "no se puede convertir el objeto '%q' a %q implícitamente"
@@ -2667,6 +2666,10 @@ msgstr "no se puede convertir el objeto '%q' a %q implícitamente"
 msgid "can't convert to %q"
 msgstr "no puede convertir a %q"
 
+#: py/runtime.c
+msgid "can't convert to int"
+msgstr "no se puede convertir a int"
+
 #: py/objstr.c
 msgid "can't convert to str implicitly"
 msgstr "no se puede convertir a str implícitamente"
@@ -3077,8 +3080,8 @@ msgid "full"
 msgstr "lleno"
 
 #: py/argcheck.c
-msgid "function does not take keyword arguments"
-msgstr "la función no tiene argumentos por palabra clave"
+msgid "function doesn't take keyword arguments"
+msgstr ""
 
 #: py/argcheck.c
 #, c-format
@@ -3132,6 +3135,10 @@ msgstr "generador ya se esta ejecutando"
 msgid "generator ignored GeneratorExit"
 msgstr "generador ignorado GeneratorExit"
 
+#: py/objgenerator.c
+msgid "generator raised StopIteration"
+msgstr ""
+
 #: shared-bindings/_stage/Layer.c
 msgid "graphic must be 2048 bytes long"
 msgstr "graphic debe ser 2048 bytes de largo"
@@ -3515,6 +3522,10 @@ msgstr "yield nativo"
 msgid "need more than %d values to unpack"
 msgstr "necesita más de %d valores para descomprimir"
 
+#: py/modmath.c
+msgid "negative factorial"
+msgstr ""
+
 #: py/objint_longlong.c py/objint_mpz.c py/runtime.c
 msgid "negative power with no float support"
 msgstr "potencia negativa sin float support"
@@ -3747,10 +3758,6 @@ msgstr "palette debe ser 32 bytes de largo"
 msgid "palette_index should be an int"
 msgstr "palette_index deberia ser un int"
 
-#: py/compile.c
-msgid "parameter annotation must be an identifier"
-msgstr "parámetro de anotación debe ser un identificador"
-
 #: py/emitinlinextensa.c
 msgid "parameters must be registers in sequence a2 to a5"
 msgstr "los parámetros deben ser registros en secuencia de a2 a a5"
@@ -3806,6 +3813,7 @@ msgstr "pow() con 3 argumentos requiere enteros"
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/artisense_rd00/mpconfigboard.h
+#: ports/esp32s2/boards/atmegazero_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -3833,7 +3841,7 @@ msgstr "presionando ambos botones al inicio.\n"
 
 #: ports/nrf/boards/aramcon2_badge/mpconfigboard.h
 msgid "pressing the left button at start up\n"
-msgstr ""
+msgstr "presione el botón izquierdo al arranque\n"
 
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 msgid "pull masks conflict with direction masks"
@@ -4192,7 +4200,7 @@ msgstr "formato de código desconocicdo '%c' para objeto de tipo '%q'"
 msgid "unknown type"
 msgstr "tipo desconocido"
 
-#: py/emitnative.c
+#: py/compile.c
 msgid "unknown type '%q'"
 msgstr "tipo desconocido '%q'"
 
@@ -4331,6 +4339,18 @@ msgstr "zi debe ser de tipo flotante"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi debe ser una forma (n_section,2)"
 
+#~ msgid "Viper functions don't currently support more than 4 arguments"
+#~ msgstr "funciones Viper no soportan por el momento, más de 4 argumentos"
+
+#~ msgid "address %08x is not aligned to %d bytes"
+#~ msgstr "la dirección %08x no esta alineada a %d bytes"
+
+#~ msgid "function does not take keyword arguments"
+#~ msgstr "la función no tiene argumentos por palabra clave"
+
+#~ msgid "parameter annotation must be an identifier"
+#~ msgstr "parámetro de anotación debe ser un identificador"
+
 #~ msgid "Total data to write is larger than outgoing_packet_length"
 #~ msgstr ""
 #~ "Los datos totales a escribir son más grandes que outgoing_packet_length"
@@ -4626,9 +4646,6 @@ msgstr "zi debe ser una forma (n_section,2)"
 #~ msgid "can't convert to float"
 #~ msgstr "no se puede convertir a float"
 
-#~ msgid "can't convert to int"
-#~ msgstr "no se puede convertir a int"
-
 #~ msgid "object '%s' is not a tuple or list"
 #~ msgstr "el objeto '%s' no es una tupla o lista"
 
diff --git a/locale/fil.po b/locale/fil.po
index 10b98f22a0..aa1badbfaf 100644
--- a/locale/fil.po
+++ b/locale/fil.po
@@ -2326,12 +2326,6 @@ msgstr ""
 msgid "Version was invalid"
 msgstr ""
 
-#: py/emitnative.c
-msgid "Viper functions don't currently support more than 4 arguments"
-msgstr ""
-"Ang mga function ng Viper ay kasalukuyang hindi sumusuporta sa higit sa 4 na "
-"argumento"
-
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Voltage read timed out"
 msgstr ""
@@ -2417,11 +2411,6 @@ msgstr "a bytes-like object ay kailangan"
 msgid "abort() called"
 msgstr "abort() tinawag"
 
-#: extmod/machine_mem.c
-#, c-format
-msgid "address %08x is not aligned to %d bytes"
-msgstr "address %08x ay hindi pantay sa %d bytes"
-
 #: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr "wala sa sakop ang address"
@@ -2430,6 +2419,10 @@ msgstr "wala sa sakop ang address"
 msgid "addresses is empty"
 msgstr "walang laman ang address"
 
+#: py/compile.c
+msgid "annotation must be an identifier"
+msgstr ""
+
 #: py/modbuiltins.c
 msgid "arg is an empty sequence"
 msgstr "arg ay walang laman na sequence"
@@ -2614,6 +2607,10 @@ msgstr "hindi ma i-assign sa expression"
 msgid "can't convert %q to %q"
 msgstr ""
 
+#: py/runtime.c
+msgid "can't convert %q to int"
+msgstr ""
+
 #: py/objstr.c
 msgid "can't convert '%q' object to %q implicitly"
 msgstr "hindi maaaring i-convert ang '%q' na bagay sa %q nang walang pahiwatig"
@@ -2622,6 +2619,10 @@ msgstr "hindi maaaring i-convert ang '%q' na bagay sa %q nang walang pahiwatig"
 msgid "can't convert to %q"
 msgstr ""
 
+#: py/runtime.c
+msgid "can't convert to int"
+msgstr "hindi ma-convert sa int"
+
 #: py/objstr.c
 msgid "can't convert to str implicitly"
 msgstr "hindi ma i-convert sa string ng walang pahiwatig"
@@ -3035,8 +3036,8 @@ msgid "full"
 msgstr "puno"
 
 #: py/argcheck.c
-msgid "function does not take keyword arguments"
-msgstr "ang function ay hindi kumukuha ng mga argumento ng keyword"
+msgid "function doesn't take keyword arguments"
+msgstr ""
 
 #: py/argcheck.c
 #, c-format
@@ -3091,6 +3092,10 @@ msgstr "insinasagawa na ng generator"
 msgid "generator ignored GeneratorExit"
 msgstr "hindi pinansin ng generator ang GeneratorExit"
 
+#: py/objgenerator.c
+msgid "generator raised StopIteration"
+msgstr ""
+
 #: shared-bindings/_stage/Layer.c
 msgid "graphic must be 2048 bytes long"
 msgstr "graphic ay dapat 2048 bytes ang haba"
@@ -3474,6 +3479,10 @@ msgstr "native yield"
 msgid "need more than %d values to unpack"
 msgstr "kailangan ng higit sa %d na halaga upang i-unpack"
 
+#: py/modmath.c
+msgid "negative factorial"
+msgstr ""
+
 #: py/objint_longlong.c py/objint_mpz.c py/runtime.c
 msgid "negative power with no float support"
 msgstr "negatibong power na walang float support"
@@ -3704,10 +3713,6 @@ msgstr "ang palette ay dapat 32 bytes ang haba"
 msgid "palette_index should be an int"
 msgstr "palette_index ay dapat na int"
 
-#: py/compile.c
-msgid "parameter annotation must be an identifier"
-msgstr "parameter annotation ay dapat na identifier"
-
 #: py/emitinlinextensa.c
 msgid "parameters must be registers in sequence a2 to a5"
 msgstr "ang mga parameter ay dapat na nagrerehistro sa sequence a2 hanggang a5"
@@ -3764,6 +3769,7 @@ msgstr "pow() na may 3 argumento kailangan ng integers"
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/artisense_rd00/mpconfigboard.h
+#: ports/esp32s2/boards/atmegazero_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -4151,7 +4157,7 @@ msgstr ""
 msgid "unknown type"
 msgstr "hindi malaman ang type (unknown type)"
 
-#: py/emitnative.c
+#: py/compile.c
 msgid "unknown type '%q'"
 msgstr "hindi malaman ang type '%q'"
 
@@ -4292,6 +4298,20 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "Viper functions don't currently support more than 4 arguments"
+#~ msgstr ""
+#~ "Ang mga function ng Viper ay kasalukuyang hindi sumusuporta sa higit sa 4 "
+#~ "na argumento"
+
+#~ msgid "address %08x is not aligned to %d bytes"
+#~ msgstr "address %08x ay hindi pantay sa %d bytes"
+
+#~ msgid "function does not take keyword arguments"
+#~ msgstr "ang function ay hindi kumukuha ng mga argumento ng keyword"
+
+#~ msgid "parameter annotation must be an identifier"
+#~ msgstr "parameter annotation ay dapat na identifier"
+
 #~ msgid "buffer must be a bytes-like object"
 #~ msgstr "buffer ay dapat bytes-like object"
 
@@ -4369,9 +4389,6 @@ msgstr ""
 #~ msgid "can't convert to float"
 #~ msgstr "hindi ma-convert sa float"
 
-#~ msgid "can't convert to int"
-#~ msgstr "hindi ma-convert sa int"
-
 #~ msgid "object '%s' is not a tuple or list"
 #~ msgstr "object '%s' ay hindi tuple o list"
 
diff --git a/locale/fr.po b/locale/fr.po
index 90cbbb8798..941f877fe4 100644
--- a/locale/fr.po
+++ b/locale/fr.po
@@ -8,7 +8,7 @@ msgstr ""
 "Project-Id-Version: 0.1\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2021-04-20 16:02+0000\n"
+"PO-Revision-Date: 2021-04-22 17:16+0000\n"
 "Last-Translator: Hugo Dahl <hugo@code-jedi.com>\n"
 "Language: fr\n"
 "MIME-Version: 1.0\n"
@@ -2210,7 +2210,7 @@ msgstr "Trop d'affichages"
 
 #: ports/nrf/common-hal/_bleio/PacketBuffer.c
 msgid "Total data to write is larger than %q"
-msgstr ""
+msgstr "Quantité de données à écrire est plus que %q"
 
 #: py/obj.c
 msgid "Traceback (most recent call last):\n"
@@ -2387,11 +2387,6 @@ msgstr "Longueur de la valeur > max_length"
 msgid "Version was invalid"
 msgstr "Version est invalide"
 
-#: py/emitnative.c
-msgid "Viper functions don't currently support more than 4 arguments"
-msgstr ""
-"les fonctions de Viper ne supportent pas plus de 4 arguments actuellement"
-
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Voltage read timed out"
 msgstr "La lecture de la tension a expiré"
@@ -2480,11 +2475,6 @@ msgstr "un objet 'bytes-like' est requis"
 msgid "abort() called"
 msgstr "abort() appelé"
 
-#: extmod/machine_mem.c
-#, c-format
-msgid "address %08x is not aligned to %d bytes"
-msgstr "l'adresse %08x n'est pas alignée sur %d octets"
-
 #: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr "adresse hors limites"
@@ -2493,6 +2483,10 @@ msgstr "adresse hors limites"
 msgid "addresses is empty"
 msgstr "adresses vides"
 
+#: py/compile.c
+msgid "annotation must be an identifier"
+msgstr ""
+
 #: py/modbuiltins.c
 msgid "arg is an empty sequence"
 msgstr "l'argument est une séquence vide"
@@ -2676,6 +2670,10 @@ msgstr "ne peut pas assigner à une expression"
 msgid "can't convert %q to %q"
 msgstr "impossible de convertir %q en %q"
 
+#: py/runtime.c
+msgid "can't convert %q to int"
+msgstr ""
+
 #: py/objstr.c
 msgid "can't convert '%q' object to %q implicitly"
 msgstr "impossible de convertir l'objet '%q' en '%q' implicitement"
@@ -2684,6 +2682,10 @@ msgstr "impossible de convertir l'objet '%q' en '%q' implicitement"
 msgid "can't convert to %q"
 msgstr "impossible de convertir en %q"
 
+#: py/runtime.c
+msgid "can't convert to int"
+msgstr "ne peut convertir en entier 'int'"
+
 #: py/objstr.c
 msgid "can't convert to str implicitly"
 msgstr "impossible de convertir en chaine 'str' implicitement"
@@ -3101,8 +3103,8 @@ msgid "full"
 msgstr "plein"
 
 #: py/argcheck.c
-msgid "function does not take keyword arguments"
-msgstr "la fonction ne prend pas d'arguments nommés"
+msgid "function doesn't take keyword arguments"
+msgstr ""
 
 #: py/argcheck.c
 #, c-format
@@ -3156,6 +3158,10 @@ msgstr "générateur déjà en cours d'exécution"
 msgid "generator ignored GeneratorExit"
 msgstr "le générateur a ignoré GeneratorExit"
 
+#: py/objgenerator.c
+msgid "generator raised StopIteration"
+msgstr ""
+
 #: shared-bindings/_stage/Layer.c
 msgid "graphic must be 2048 bytes long"
 msgstr "graphic doit être long de 2048 octets"
@@ -3540,6 +3546,10 @@ msgstr "'yield' natif"
 msgid "need more than %d values to unpack"
 msgstr "nécessite plus de %d valeurs à dégrouper"
 
+#: py/modmath.c
+msgid "negative factorial"
+msgstr ""
+
 #: py/objint_longlong.c py/objint_mpz.c py/runtime.c
 msgid "negative power with no float support"
 msgstr "puissance négative sans support des nombres à virgule flottante"
@@ -3773,10 +3783,6 @@ msgstr "la palette doit être longue de 32 octets"
 msgid "palette_index should be an int"
 msgstr "palette_index devrait être un entier 'int'"
 
-#: py/compile.c
-msgid "parameter annotation must be an identifier"
-msgstr "l'annotation du paramètre doit être un identifiant"
-
 #: py/emitinlinextensa.c
 msgid "parameters must be registers in sequence a2 to a5"
 msgstr "les paramètres doivent être des registres dans la séquence a2 à a5"
@@ -3833,6 +3839,7 @@ msgstr "pow() avec 3 arguments nécessite des entiers"
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/artisense_rd00/mpconfigboard.h
+#: ports/esp32s2/boards/atmegazero_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -4219,7 +4226,7 @@ msgstr "code de formatage inconnu '%c' pour objet de type '%q'"
 msgid "unknown type"
 msgstr "type inconnu"
 
-#: py/emitnative.c
+#: py/compile.c
 msgid "unknown type '%q'"
 msgstr "type '%q' inconnu"
 
@@ -4358,6 +4365,19 @@ msgstr "zi doit être de type float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi doit être de forme (n_section, 2)"
 
+#~ msgid "Viper functions don't currently support more than 4 arguments"
+#~ msgstr ""
+#~ "les fonctions de Viper ne supportent pas plus de 4 arguments actuellement"
+
+#~ msgid "address %08x is not aligned to %d bytes"
+#~ msgstr "l'adresse %08x n'est pas alignée sur %d octets"
+
+#~ msgid "function does not take keyword arguments"
+#~ msgstr "la fonction ne prend pas d'arguments nommés"
+
+#~ msgid "parameter annotation must be an identifier"
+#~ msgstr "l'annotation du paramètre doit être un identifiant"
+
 #~ msgid "Total data to write is larger than outgoing_packet_length"
 #~ msgstr ""
 #~ "Le nombre total de données à écrire est supérieur à outgoing_packet_length"
@@ -4655,9 +4675,6 @@ msgstr "zi doit être de forme (n_section, 2)"
 #~ msgid "can't convert to float"
 #~ msgstr "ne peut convertir en nombre à virgule flottante 'float'"
 
-#~ msgid "can't convert to int"
-#~ msgstr "ne peut convertir en entier 'int'"
-
 #~ msgid "object '%s' is not a tuple or list"
 #~ msgstr "l'objet '%s' n'est pas un tuple ou une liste"
 
diff --git a/locale/hi.po b/locale/hi.po
index 949e830440..ff2a0530e5 100644
--- a/locale/hi.po
+++ b/locale/hi.po
@@ -2304,10 +2304,6 @@ msgstr ""
 msgid "Version was invalid"
 msgstr ""
 
-#: py/emitnative.c
-msgid "Viper functions don't currently support more than 4 arguments"
-msgstr ""
-
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Voltage read timed out"
 msgstr ""
@@ -2387,11 +2383,6 @@ msgstr ""
 msgid "abort() called"
 msgstr ""
 
-#: extmod/machine_mem.c
-#, c-format
-msgid "address %08x is not aligned to %d bytes"
-msgstr ""
-
 #: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr ""
@@ -2400,6 +2391,10 @@ msgstr ""
 msgid "addresses is empty"
 msgstr ""
 
+#: py/compile.c
+msgid "annotation must be an identifier"
+msgstr ""
+
 #: py/modbuiltins.c
 msgid "arg is an empty sequence"
 msgstr ""
@@ -2582,6 +2577,10 @@ msgstr ""
 msgid "can't convert %q to %q"
 msgstr ""
 
+#: py/runtime.c
+msgid "can't convert %q to int"
+msgstr ""
+
 #: py/objstr.c
 msgid "can't convert '%q' object to %q implicitly"
 msgstr ""
@@ -2590,6 +2589,10 @@ msgstr ""
 msgid "can't convert to %q"
 msgstr ""
 
+#: py/runtime.c
+msgid "can't convert to int"
+msgstr ""
+
 #: py/objstr.c
 msgid "can't convert to str implicitly"
 msgstr ""
@@ -2993,7 +2996,7 @@ msgid "full"
 msgstr ""
 
 #: py/argcheck.c
-msgid "function does not take keyword arguments"
+msgid "function doesn't take keyword arguments"
 msgstr ""
 
 #: py/argcheck.c
@@ -3048,6 +3051,10 @@ msgstr ""
 msgid "generator ignored GeneratorExit"
 msgstr ""
 
+#: py/objgenerator.c
+msgid "generator raised StopIteration"
+msgstr ""
+
 #: shared-bindings/_stage/Layer.c
 msgid "graphic must be 2048 bytes long"
 msgstr ""
@@ -3427,6 +3434,10 @@ msgstr ""
 msgid "need more than %d values to unpack"
 msgstr ""
 
+#: py/modmath.c
+msgid "negative factorial"
+msgstr ""
+
 #: py/objint_longlong.c py/objint_mpz.c py/runtime.c
 msgid "negative power with no float support"
 msgstr ""
@@ -3656,10 +3667,6 @@ msgstr ""
 msgid "palette_index should be an int"
 msgstr ""
 
-#: py/compile.c
-msgid "parameter annotation must be an identifier"
-msgstr ""
-
 #: py/emitinlinextensa.c
 msgid "parameters must be registers in sequence a2 to a5"
 msgstr ""
@@ -3715,6 +3722,7 @@ msgstr ""
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/artisense_rd00/mpconfigboard.h
+#: ports/esp32s2/boards/atmegazero_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -4098,7 +4106,7 @@ msgstr ""
 msgid "unknown type"
 msgstr ""
 
-#: py/emitnative.c
+#: py/compile.c
 msgid "unknown type '%q'"
 msgstr ""
 
diff --git a/locale/it_IT.po b/locale/it_IT.po
index 04c39d0d08..188e25d16f 100644
--- a/locale/it_IT.po
+++ b/locale/it_IT.po
@@ -2347,10 +2347,6 @@ msgstr ""
 msgid "Version was invalid"
 msgstr ""
 
-#: py/emitnative.c
-msgid "Viper functions don't currently support more than 4 arguments"
-msgstr "Le funzioni Viper non supportano più di 4 argomenti al momento"
-
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Voltage read timed out"
 msgstr ""
@@ -2430,11 +2426,6 @@ msgstr "un oggetto byte-like è richiesto"
 msgid "abort() called"
 msgstr "abort() chiamato"
 
-#: extmod/machine_mem.c
-#, c-format
-msgid "address %08x is not aligned to %d bytes"
-msgstr "l'indirizzo %08x non è allineato a %d bytes"
-
 #: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr "indirizzo fuori limite"
@@ -2443,6 +2434,10 @@ msgstr "indirizzo fuori limite"
 msgid "addresses is empty"
 msgstr "gli indirizzi sono vuoti"
 
+#: py/compile.c
+msgid "annotation must be an identifier"
+msgstr ""
+
 #: py/modbuiltins.c
 msgid "arg is an empty sequence"
 msgstr "l'argomento è una sequenza vuota"
@@ -2629,6 +2624,10 @@ msgstr "impossibile assegnare all'espressione"
 msgid "can't convert %q to %q"
 msgstr ""
 
+#: py/runtime.c
+msgid "can't convert %q to int"
+msgstr ""
+
 #: py/objstr.c
 msgid "can't convert '%q' object to %q implicitly"
 msgstr "impossibile convertire l'oggetto '%q' implicitamente in %q"
@@ -2637,6 +2636,10 @@ msgstr "impossibile convertire l'oggetto '%q' implicitamente in %q"
 msgid "can't convert to %q"
 msgstr ""
 
+#: py/runtime.c
+msgid "can't convert to int"
+msgstr "non è possibile convertire a int"
+
 #: py/objstr.c
 msgid "can't convert to str implicitly"
 msgstr "impossibile convertire a stringa implicitamente"
@@ -3046,8 +3049,8 @@ msgid "full"
 msgstr "pieno"
 
 #: py/argcheck.c
-msgid "function does not take keyword arguments"
-msgstr "la funzione non prende argomenti nominati"
+msgid "function doesn't take keyword arguments"
+msgstr ""
 
 #: py/argcheck.c
 #, c-format
@@ -3102,6 +3105,10 @@ msgstr ""
 msgid "generator ignored GeneratorExit"
 msgstr ""
 
+#: py/objgenerator.c
+msgid "generator raised StopIteration"
+msgstr ""
+
 #: shared-bindings/_stage/Layer.c
 msgid "graphic must be 2048 bytes long"
 msgstr "graphic deve essere lunga 2048 byte"
@@ -3486,6 +3493,10 @@ msgstr "yield nativo"
 msgid "need more than %d values to unpack"
 msgstr "necessari più di %d valori da scompattare"
 
+#: py/modmath.c
+msgid "negative factorial"
+msgstr ""
+
 #: py/objint_longlong.c py/objint_mpz.c py/runtime.c
 msgid "negative power with no float support"
 msgstr "potenza negativa senza supporto per float"
@@ -3720,10 +3731,6 @@ msgstr "la palette deve essere lunga 32 byte"
 msgid "palette_index should be an int"
 msgstr "palette_index deve essere un int"
 
-#: py/compile.c
-msgid "parameter annotation must be an identifier"
-msgstr ""
-
 #: py/emitinlinextensa.c
 msgid "parameters must be registers in sequence a2 to a5"
 msgstr "parametri devono essere i registri in sequenza da a2 a a5"
@@ -3781,6 +3788,7 @@ msgstr "pow() con 3 argomenti richiede interi"
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/artisense_rd00/mpconfigboard.h
+#: ports/esp32s2/boards/atmegazero_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -4168,7 +4176,7 @@ msgstr ""
 msgid "unknown type"
 msgstr "tipo sconosciuto"
 
-#: py/emitnative.c
+#: py/compile.c
 msgid "unknown type '%q'"
 msgstr "tipo '%q' sconosciuto"
 
@@ -4309,6 +4317,15 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "Viper functions don't currently support more than 4 arguments"
+#~ msgstr "Le funzioni Viper non supportano più di 4 argomenti al momento"
+
+#~ msgid "address %08x is not aligned to %d bytes"
+#~ msgstr "l'indirizzo %08x non è allineato a %d bytes"
+
+#~ msgid "function does not take keyword arguments"
+#~ msgstr "la funzione non prende argomenti nominati"
+
 #~ msgid "Attempted heap allocation when MicroPython VM not running."
 #~ msgstr "Provo l'allocazione quando MicroPython VM non è attivo."
 
@@ -4386,9 +4403,6 @@ msgstr ""
 #~ msgid "can't convert to float"
 #~ msgstr "non è possibile convertire a float"
 
-#~ msgid "can't convert to int"
-#~ msgstr "non è possibile convertire a int"
-
 #~ msgid "object '%s' is not a tuple or list"
 #~ msgstr "oggetto '%s' non è una tupla o una lista"
 
diff --git a/locale/ja.po b/locale/ja.po
index 315fcb34c3..0d3e93d1c2 100644
--- a/locale/ja.po
+++ b/locale/ja.po
@@ -2327,10 +2327,6 @@ msgstr ""
 msgid "Version was invalid"
 msgstr ""
 
-#: py/emitnative.c
-msgid "Viper functions don't currently support more than 4 arguments"
-msgstr ""
-
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Voltage read timed out"
 msgstr "電圧読み取りがタイムアウト"
@@ -2410,11 +2406,6 @@ msgstr "bytes-likeオブジェクトが必要"
 msgid "abort() called"
 msgstr "abort()が呼ばれました"
 
-#: extmod/machine_mem.c
-#, c-format
-msgid "address %08x is not aligned to %d bytes"
-msgstr ""
-
 #: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr "アドレスが範囲外"
@@ -2423,6 +2414,10 @@ msgstr "アドレスが範囲外"
 msgid "addresses is empty"
 msgstr ""
 
+#: py/compile.c
+msgid "annotation must be an identifier"
+msgstr ""
+
 #: py/modbuiltins.c
 msgid "arg is an empty sequence"
 msgstr ""
@@ -2605,6 +2600,10 @@ msgstr "式には代入できません"
 msgid "can't convert %q to %q"
 msgstr "%qを%qに変換できません"
 
+#: py/runtime.c
+msgid "can't convert %q to int"
+msgstr ""
+
 #: py/objstr.c
 msgid "can't convert '%q' object to %q implicitly"
 msgstr "オブジェクト '%q' を %q に暗黙に変換できません"
@@ -2613,6 +2612,10 @@ msgstr "オブジェクト '%q' を %q に暗黙に変換できません"
 msgid "can't convert to %q"
 msgstr "%q に変換できません"
 
+#: py/runtime.c
+msgid "can't convert to int"
+msgstr ""
+
 #: py/objstr.c
 msgid "can't convert to str implicitly"
 msgstr ""
@@ -3020,7 +3023,7 @@ msgid "full"
 msgstr ""
 
 #: py/argcheck.c
-msgid "function does not take keyword arguments"
+msgid "function doesn't take keyword arguments"
 msgstr ""
 
 #: py/argcheck.c
@@ -3075,6 +3078,10 @@ msgstr ""
 msgid "generator ignored GeneratorExit"
 msgstr ""
 
+#: py/objgenerator.c
+msgid "generator raised StopIteration"
+msgstr ""
+
 #: shared-bindings/_stage/Layer.c
 msgid "graphic must be 2048 bytes long"
 msgstr "graphicは2048バイトでなければなりません"
@@ -3455,6 +3462,10 @@ msgstr ""
 msgid "need more than %d values to unpack"
 msgstr "アンパックする値は%d個では足りません"
 
+#: py/modmath.c
+msgid "negative factorial"
+msgstr ""
+
 #: py/objint_longlong.c py/objint_mpz.c py/runtime.c
 msgid "negative power with no float support"
 msgstr ""
@@ -3684,10 +3695,6 @@ msgstr "パレットの長さは32バイトでなければなりません"
 msgid "palette_index should be an int"
 msgstr "palette_indexには整数が必要"
 
-#: py/compile.c
-msgid "parameter annotation must be an identifier"
-msgstr "引数アノテーションは識別子でなければなりません"
-
 #: py/emitinlinextensa.c
 msgid "parameters must be registers in sequence a2 to a5"
 msgstr ""
@@ -3745,6 +3752,7 @@ msgstr "pow()の第3引数には整数が必要"
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/artisense_rd00/mpconfigboard.h
+#: ports/esp32s2/boards/atmegazero_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -4129,7 +4137,7 @@ msgstr "型'%q'のオブジェクトに対する不明な書式コード'%c'"
 msgid "unknown type"
 msgstr "不明な型"
 
-#: py/emitnative.c
+#: py/compile.c
 msgid "unknown type '%q'"
 msgstr "不明な型 '%q'"
 
@@ -4268,6 +4276,9 @@ msgstr "ziはfloat値でなければなりません"
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "parameter annotation must be an identifier"
+#~ msgstr "引数アノテーションは識別子でなければなりません"
+
 #~ msgid "buffer must be a bytes-like object"
 #~ msgstr "バッファはbytes-likeオブジェクトでなければなりません"
 
diff --git a/locale/ko.po b/locale/ko.po
index ecb238b08b..7adda96b93 100644
--- a/locale/ko.po
+++ b/locale/ko.po
@@ -2308,10 +2308,6 @@ msgstr ""
 msgid "Version was invalid"
 msgstr ""
 
-#: py/emitnative.c
-msgid "Viper functions don't currently support more than 4 arguments"
-msgstr ""
-
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Voltage read timed out"
 msgstr ""
@@ -2391,11 +2387,6 @@ msgstr ""
 msgid "abort() called"
 msgstr ""
 
-#: extmod/machine_mem.c
-#, c-format
-msgid "address %08x is not aligned to %d bytes"
-msgstr ""
-
 #: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr ""
@@ -2404,6 +2395,10 @@ msgstr ""
 msgid "addresses is empty"
 msgstr ""
 
+#: py/compile.c
+msgid "annotation must be an identifier"
+msgstr ""
+
 #: py/modbuiltins.c
 msgid "arg is an empty sequence"
 msgstr ""
@@ -2586,6 +2581,10 @@ msgstr ""
 msgid "can't convert %q to %q"
 msgstr ""
 
+#: py/runtime.c
+msgid "can't convert %q to int"
+msgstr ""
+
 #: py/objstr.c
 msgid "can't convert '%q' object to %q implicitly"
 msgstr ""
@@ -2594,6 +2593,10 @@ msgstr ""
 msgid "can't convert to %q"
 msgstr ""
 
+#: py/runtime.c
+msgid "can't convert to int"
+msgstr ""
+
 #: py/objstr.c
 msgid "can't convert to str implicitly"
 msgstr ""
@@ -2997,7 +3000,7 @@ msgid "full"
 msgstr "완전한(full)"
 
 #: py/argcheck.c
-msgid "function does not take keyword arguments"
+msgid "function doesn't take keyword arguments"
 msgstr ""
 
 #: py/argcheck.c
@@ -3052,6 +3055,10 @@ msgstr ""
 msgid "generator ignored GeneratorExit"
 msgstr ""
 
+#: py/objgenerator.c
+msgid "generator raised StopIteration"
+msgstr ""
+
 #: shared-bindings/_stage/Layer.c
 msgid "graphic must be 2048 bytes long"
 msgstr ""
@@ -3431,6 +3438,10 @@ msgstr ""
 msgid "need more than %d values to unpack"
 msgstr ""
 
+#: py/modmath.c
+msgid "negative factorial"
+msgstr ""
+
 #: py/objint_longlong.c py/objint_mpz.c py/runtime.c
 msgid "negative power with no float support"
 msgstr ""
@@ -3660,10 +3671,6 @@ msgstr ""
 msgid "palette_index should be an int"
 msgstr ""
 
-#: py/compile.c
-msgid "parameter annotation must be an identifier"
-msgstr ""
-
 #: py/emitinlinextensa.c
 msgid "parameters must be registers in sequence a2 to a5"
 msgstr ""
@@ -3719,6 +3726,7 @@ msgstr ""
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/artisense_rd00/mpconfigboard.h
+#: ports/esp32s2/boards/atmegazero_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -4102,7 +4110,7 @@ msgstr ""
 msgid "unknown type"
 msgstr ""
 
-#: py/emitnative.c
+#: py/compile.c
 msgid "unknown type '%q'"
 msgstr ""
 
diff --git a/locale/nl.po b/locale/nl.po
index 8db91bded8..abc7a00a57 100644
--- a/locale/nl.po
+++ b/locale/nl.po
@@ -2346,10 +2346,6 @@ msgstr "Waarde length > max_length"
 msgid "Version was invalid"
 msgstr ""
 
-#: py/emitnative.c
-msgid "Viper functions don't currently support more than 4 arguments"
-msgstr "Viper-functies ondersteunen momenteel niet meer dan 4 argumenten"
-
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Voltage read timed out"
 msgstr "Voltage lees time-out"
@@ -2438,11 +2434,6 @@ msgstr "een bytes-achtig object is vereist"
 msgid "abort() called"
 msgstr "abort() aangeroepen"
 
-#: extmod/machine_mem.c
-#, c-format
-msgid "address %08x is not aligned to %d bytes"
-msgstr "adres %08x is niet afgestemd op %d bytes"
-
 #: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr "adres buiten bereik"
@@ -2451,6 +2442,10 @@ msgstr "adres buiten bereik"
 msgid "addresses is empty"
 msgstr "adressen zijn leeg"
 
+#: py/compile.c
+msgid "annotation must be an identifier"
+msgstr ""
+
 #: py/modbuiltins.c
 msgid "arg is an empty sequence"
 msgstr "arg is een lege sequentie"
@@ -2634,6 +2629,10 @@ msgstr "kan niet toewijzen aan expressie"
 msgid "can't convert %q to %q"
 msgstr "kan %q niet naar %q converteren"
 
+#: py/runtime.c
+msgid "can't convert %q to int"
+msgstr ""
+
 #: py/objstr.c
 msgid "can't convert '%q' object to %q implicitly"
 msgstr "kan '%q' object niet omzetten naar %q impliciet"
@@ -2642,6 +2641,10 @@ msgstr "kan '%q' object niet omzetten naar %q impliciet"
 msgid "can't convert to %q"
 msgstr "kan niet naar %q converteren"
 
+#: py/runtime.c
+msgid "can't convert to int"
+msgstr "kan niet omzetten naar int"
+
 #: py/objstr.c
 msgid "can't convert to str implicitly"
 msgstr "kan niet omzetten naar str impliciet"
@@ -3048,8 +3051,8 @@ msgid "full"
 msgstr "vol"
 
 #: py/argcheck.c
-msgid "function does not take keyword arguments"
-msgstr "functie accepteert geen keyword argumenten"
+msgid "function doesn't take keyword arguments"
+msgstr ""
 
 #: py/argcheck.c
 #, c-format
@@ -3104,6 +3107,10 @@ msgstr "generator wordt al uitgevoerd"
 msgid "generator ignored GeneratorExit"
 msgstr "generator negeerde GeneratorExit"
 
+#: py/objgenerator.c
+msgid "generator raised StopIteration"
+msgstr ""
+
 #: shared-bindings/_stage/Layer.c
 msgid "graphic must be 2048 bytes long"
 msgstr "graphic moet 2048 bytes lang zijn"
@@ -3486,6 +3493,10 @@ msgstr "natuurlijke opbrengst (native yield)"
 msgid "need more than %d values to unpack"
 msgstr "Om uit te pakken zijn meer dan %d waarden vereist"
 
+#: py/modmath.c
+msgid "negative factorial"
+msgstr ""
+
 #: py/objint_longlong.c py/objint_mpz.c py/runtime.c
 msgid "negative power with no float support"
 msgstr "negatieve macht terwijl er geen ondersteuning is voor float"
@@ -3715,10 +3726,6 @@ msgstr "palette moet 32 bytes lang zijn"
 msgid "palette_index should be an int"
 msgstr "palette_index moet een int zijn"
 
-#: py/compile.c
-msgid "parameter annotation must be an identifier"
-msgstr "parameter annotatie moet een identifier zijn"
-
 #: py/emitinlinextensa.c
 msgid "parameters must be registers in sequence a2 to a5"
 msgstr "parameters moeten registers zijn in de volgorde a2 tot a5"
@@ -3775,6 +3782,7 @@ msgstr "pow() met 3 argumenten vereist integers"
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/artisense_rd00/mpconfigboard.h
+#: ports/esp32s2/boards/atmegazero_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -4160,7 +4168,7 @@ msgstr "onbekende formaatcode '%c' voor object van type '%q'"
 msgid "unknown type"
 msgstr "onbekend type"
 
-#: py/emitnative.c
+#: py/compile.c
 msgid "unknown type '%q'"
 msgstr "onbekend type '%q'"
 
@@ -4299,6 +4307,18 @@ msgstr "zi moet van type float zijn"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi moet vorm (n_section, 2) hebben"
 
+#~ msgid "Viper functions don't currently support more than 4 arguments"
+#~ msgstr "Viper-functies ondersteunen momenteel niet meer dan 4 argumenten"
+
+#~ msgid "address %08x is not aligned to %d bytes"
+#~ msgstr "adres %08x is niet afgestemd op %d bytes"
+
+#~ msgid "function does not take keyword arguments"
+#~ msgstr "functie accepteert geen keyword argumenten"
+
+#~ msgid "parameter annotation must be an identifier"
+#~ msgstr "parameter annotatie moet een identifier zijn"
+
 #~ msgid "Total data to write is larger than outgoing_packet_length"
 #~ msgstr "Totale data om te schrijven is groter dan outgoing_packet_length"
 
@@ -4569,9 +4589,6 @@ msgstr "zi moet vorm (n_section, 2) hebben"
 #~ msgid "can't convert to float"
 #~ msgstr "kan niet omzetten naar float"
 
-#~ msgid "can't convert to int"
-#~ msgstr "kan niet omzetten naar int"
-
 #~ msgid "object '%s' is not a tuple or list"
 #~ msgstr "object '%s' is geen tuple of lijst"
 
diff --git a/locale/pl.po b/locale/pl.po
index 9f01cd8a9e..1fbc6e4e34 100644
--- a/locale/pl.po
+++ b/locale/pl.po
@@ -2317,10 +2317,6 @@ msgstr ""
 msgid "Version was invalid"
 msgstr ""
 
-#: py/emitnative.c
-msgid "Viper functions don't currently support more than 4 arguments"
-msgstr "Funkcje Viper nie obsługują obecnie więcej niż 4 argumentów"
-
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Voltage read timed out"
 msgstr ""
@@ -2406,11 +2402,6 @@ msgstr "wymagany obiekt typu bytes"
 msgid "abort() called"
 msgstr "Wywołano abort()"
 
-#: extmod/machine_mem.c
-#, c-format
-msgid "address %08x is not aligned to %d bytes"
-msgstr "adres %08x nie jest wyrównany do %d bajtów"
-
 #: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr "adres poza zakresem"
@@ -2419,6 +2410,10 @@ msgstr "adres poza zakresem"
 msgid "addresses is empty"
 msgstr "adres jest pusty"
 
+#: py/compile.c
+msgid "annotation must be an identifier"
+msgstr ""
+
 #: py/modbuiltins.c
 msgid "arg is an empty sequence"
 msgstr "arg jest puste"
@@ -2601,6 +2596,10 @@ msgstr "przypisanie do wyrażenia"
 msgid "can't convert %q to %q"
 msgstr "nie można dokonać konwersji %q na %q"
 
+#: py/runtime.c
+msgid "can't convert %q to int"
+msgstr ""
+
 #: py/objstr.c
 msgid "can't convert '%q' object to %q implicitly"
 msgstr "nie można automatycznie skonwertować '%q' do '%q'"
@@ -2609,6 +2608,10 @@ msgstr "nie można automatycznie skonwertować '%q' do '%q'"
 msgid "can't convert to %q"
 msgstr ""
 
+#: py/runtime.c
+msgid "can't convert to int"
+msgstr "nie można skonwertować do int"
+
 #: py/objstr.c
 msgid "can't convert to str implicitly"
 msgstr "nie można automatycznie skonwertować do str"
@@ -3013,8 +3016,8 @@ msgid "full"
 msgstr "pełny"
 
 #: py/argcheck.c
-msgid "function does not take keyword arguments"
-msgstr "funkcja nie bierze argumentów nazwanych"
+msgid "function doesn't take keyword arguments"
+msgstr ""
 
 #: py/argcheck.c
 #, c-format
@@ -3068,6 +3071,10 @@ msgstr "generator już się wykonuje"
 msgid "generator ignored GeneratorExit"
 msgstr "generator zignorował GeneratorExit"
 
+#: py/objgenerator.c
+msgid "generator raised StopIteration"
+msgstr ""
+
 #: shared-bindings/_stage/Layer.c
 msgid "graphic must be 2048 bytes long"
 msgstr "graphic musi mieć 2048 bajtów długości"
@@ -3447,6 +3454,10 @@ msgstr "natywny yield"
 msgid "need more than %d values to unpack"
 msgstr "potrzeba więcej niż %d do rozpakowania"
 
+#: py/modmath.c
+msgid "negative factorial"
+msgstr ""
+
 #: py/objint_longlong.c py/objint_mpz.c py/runtime.c
 msgid "negative power with no float support"
 msgstr "ujemna potęga, ale brak obsługi liczb zmiennoprzecinkowych"
@@ -3676,10 +3687,6 @@ msgstr "paleta musi mieć 32 bajty długości"
 msgid "palette_index should be an int"
 msgstr "palette_index powinien być całkowity"
 
-#: py/compile.c
-msgid "parameter annotation must be an identifier"
-msgstr "anotacja parametru musi być identyfikatorem"
-
 #: py/emitinlinextensa.c
 msgid "parameters must be registers in sequence a2 to a5"
 msgstr "parametry muszą być rejestrami w kolejności a2 do a5"
@@ -3736,6 +3743,7 @@ msgstr "trzyargumentowe pow() wymaga liczb całkowitych"
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/artisense_rd00/mpconfigboard.h
+#: ports/esp32s2/boards/atmegazero_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -4120,7 +4128,7 @@ msgstr ""
 msgid "unknown type"
 msgstr "zły typ"
 
-#: py/emitnative.c
+#: py/compile.c
 msgid "unknown type '%q'"
 msgstr "zły typ '%q'"
 
@@ -4259,6 +4267,18 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "Viper functions don't currently support more than 4 arguments"
+#~ msgstr "Funkcje Viper nie obsługują obecnie więcej niż 4 argumentów"
+
+#~ msgid "address %08x is not aligned to %d bytes"
+#~ msgstr "adres %08x nie jest wyrównany do %d bajtów"
+
+#~ msgid "function does not take keyword arguments"
+#~ msgstr "funkcja nie bierze argumentów nazwanych"
+
+#~ msgid "parameter annotation must be an identifier"
+#~ msgstr "anotacja parametru musi być identyfikatorem"
+
 #~ msgid "buffer must be a bytes-like object"
 #~ msgstr "bufor mysi być typu bytes"
 
@@ -4400,9 +4420,6 @@ msgstr ""
 #~ msgid "can't convert to float"
 #~ msgstr "nie można skonwertować do float"
 
-#~ msgid "can't convert to int"
-#~ msgstr "nie można skonwertować do int"
-
 #~ msgid "object '%s' is not a tuple or list"
 #~ msgstr "obiekt '%s' nie jest krotką ani listą"
 
diff --git a/locale/pt_BR.po b/locale/pt_BR.po
index d1a6477e9a..e3a9e6675e 100644
--- a/locale/pt_BR.po
+++ b/locale/pt_BR.po
@@ -6,7 +6,7 @@ msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2021-04-19 21:50+0000\n"
+"PO-Revision-Date: 2021-04-22 17:16+0000\n"
 "Last-Translator: Wellington Terumi Uemura <wellingtonuemura@gmail.com>\n"
 "Language-Team: \n"
 "Language: pt_BR\n"
@@ -2205,7 +2205,7 @@ msgstr "Exibições demais"
 
 #: ports/nrf/common-hal/_bleio/PacketBuffer.c
 msgid "Total data to write is larger than %q"
-msgstr ""
+msgstr "O total dos dados que serão escritos é maior do que %q"
 
 #: py/obj.c
 msgid "Traceback (most recent call last):\n"
@@ -2378,10 +2378,6 @@ msgstr "O comprimento do valor é > max_length"
 msgid "Version was invalid"
 msgstr "A versão era inválida"
 
-#: py/emitnative.c
-msgid "Viper functions don't currently support more than 4 arguments"
-msgstr "Atualmente, as funções do Viper não suportam mais de 4 argumentos"
-
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Voltage read timed out"
 msgstr "O tempo limite de leitura da tensão expirou"
@@ -2471,11 +2467,6 @@ msgstr "é necessário objetos tipo bytes"
 msgid "abort() called"
 msgstr "abort() chamado"
 
-#: extmod/machine_mem.c
-#, c-format
-msgid "address %08x is not aligned to %d bytes"
-msgstr "endereço %08x não está alinhado com %d bytes"
-
 #: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr "endereço fora dos limites"
@@ -2484,6 +2475,10 @@ msgstr "endereço fora dos limites"
 msgid "addresses is empty"
 msgstr "os endereços estão vazios"
 
+#: py/compile.c
+msgid "annotation must be an identifier"
+msgstr ""
+
 #: py/modbuiltins.c
 msgid "arg is an empty sequence"
 msgstr "o arg é uma sequência vazia"
@@ -2666,6 +2661,10 @@ msgstr "a expressão não pode ser atribuída"
 msgid "can't convert %q to %q"
 msgstr "não é possível converter %q para %q"
 
+#: py/runtime.c
+msgid "can't convert %q to int"
+msgstr ""
+
 #: py/objstr.c
 msgid "can't convert '%q' object to %q implicitly"
 msgstr "não é possível converter implicitamente o objeto '%q' para %q"
@@ -2674,6 +2673,10 @@ msgstr "não é possível converter implicitamente o objeto '%q' para %q"
 msgid "can't convert to %q"
 msgstr "não é possível converter para %q"
 
+#: py/runtime.c
+msgid "can't convert to int"
+msgstr "não é possível converter para int"
+
 #: py/objstr.c
 msgid "can't convert to str implicitly"
 msgstr "não é possível converter implicitamente para str"
@@ -3086,8 +3089,8 @@ msgid "full"
 msgstr "cheio"
 
 #: py/argcheck.c
-msgid "function does not take keyword arguments"
-msgstr "função não aceita argumentos de palavras-chave"
+msgid "function doesn't take keyword arguments"
+msgstr ""
 
 #: py/argcheck.c
 #, c-format
@@ -3141,6 +3144,10 @@ msgstr "o gerador já está em execução"
 msgid "generator ignored GeneratorExit"
 msgstr "ignorando o gerador GeneratorExit"
 
+#: py/objgenerator.c
+msgid "generator raised StopIteration"
+msgstr ""
+
 #: shared-bindings/_stage/Layer.c
 msgid "graphic must be 2048 bytes long"
 msgstr "o gráfico deve ter 2048 bytes de comprimento"
@@ -3526,6 +3533,10 @@ msgstr "rendimento nativo"
 msgid "need more than %d values to unpack"
 msgstr "precisa de mais de %d valores para desempacotar"
 
+#: py/modmath.c
+msgid "negative factorial"
+msgstr ""
+
 #: py/objint_longlong.c py/objint_mpz.c py/runtime.c
 msgid "negative power with no float support"
 msgstr "potência negativa sem suporte de flutuação"
@@ -3760,10 +3771,6 @@ msgstr "a paleta deve ter 32 bytes de comprimento"
 msgid "palette_index should be an int"
 msgstr "palette_index deve ser um int"
 
-#: py/compile.c
-msgid "parameter annotation must be an identifier"
-msgstr "a anotação do parâmetro deve ser um identificador"
-
 #: py/emitinlinextensa.c
 msgid "parameters must be registers in sequence a2 to a5"
 msgstr "os parâmetros devem ser registradores na sequência a2 até a5"
@@ -3819,6 +3826,7 @@ msgstr "o pow() com 3 argumentos requer números inteiros"
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/artisense_rd00/mpconfigboard.h
+#: ports/esp32s2/boards/atmegazero_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -4204,7 +4212,7 @@ msgstr "o formato do código '%c' é desconhecido para o objeto do tipo '%q'"
 msgid "unknown type"
 msgstr "tipo desconhecido"
 
-#: py/emitnative.c
+#: py/compile.c
 msgid "unknown type '%q'"
 msgstr "tipo desconhecido '%q'"
 
@@ -4343,6 +4351,18 @@ msgstr "zi deve ser de um tipo float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi deve estar na forma (n_section, 2)"
 
+#~ msgid "Viper functions don't currently support more than 4 arguments"
+#~ msgstr "Atualmente, as funções do Viper não suportam mais de 4 argumentos"
+
+#~ msgid "address %08x is not aligned to %d bytes"
+#~ msgstr "endereço %08x não está alinhado com %d bytes"
+
+#~ msgid "function does not take keyword arguments"
+#~ msgstr "função não aceita argumentos de palavras-chave"
+
+#~ msgid "parameter annotation must be an identifier"
+#~ msgstr "a anotação do parâmetro deve ser um identificador"
+
 #~ msgid "Total data to write is larger than outgoing_packet_length"
 #~ msgstr ""
 #~ "O total dos dados que serão gravados é maior que outgoing_packet_length"
@@ -4665,9 +4685,6 @@ msgstr "zi deve estar na forma (n_section, 2)"
 #~ msgid "can't convert to float"
 #~ msgstr "não é possível converter para float"
 
-#~ msgid "can't convert to int"
-#~ msgstr "não é possível converter para int"
-
 #~ msgid "object '%s' is not a tuple or list"
 #~ msgstr "o objeto '%s' não é uma tupla ou uma lista"
 
diff --git a/locale/sv.po b/locale/sv.po
index b2fd92abb0..29d7e22ca2 100644
--- a/locale/sv.po
+++ b/locale/sv.po
@@ -6,7 +6,7 @@ msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2021-04-19 21:50+0000\n"
+"PO-Revision-Date: 2021-04-23 12:37+0000\n"
 "Last-Translator: Jonny Bergdahl <jonny@bergdahl.it>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
 "Language: sv\n"
@@ -2179,7 +2179,7 @@ msgstr "För många displayer"
 
 #: ports/nrf/common-hal/_bleio/PacketBuffer.c
 msgid "Total data to write is larger than %q"
-msgstr ""
+msgstr "Totala data att skriva är större än %q"
 
 #: py/obj.c
 msgid "Traceback (most recent call last):\n"
@@ -2352,10 +2352,6 @@ msgstr "Värdets längd > max_length"
 msgid "Version was invalid"
 msgstr "Versionen var ogiltig"
 
-#: py/emitnative.c
-msgid "Viper functions don't currently support more than 4 arguments"
-msgstr "Viper-funktioner stöder för närvarande inte mer än fyra argument"
-
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Voltage read timed out"
 msgstr "Avläsning av spänning tog för lång tid"
@@ -2441,11 +2437,6 @@ msgstr "ett bytesliknande objekt krävs"
 msgid "abort() called"
 msgstr "abort() anropad"
 
-#: extmod/machine_mem.c
-#, c-format
-msgid "address %08x is not aligned to %d bytes"
-msgstr "adressen %08x är inte justerad till %d byte"
-
 #: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr "adress utanför gränsen"
@@ -2454,6 +2445,10 @@ msgstr "adress utanför gränsen"
 msgid "addresses is empty"
 msgstr "adresserna är tomma"
 
+#: py/compile.c
+msgid "annotation must be an identifier"
+msgstr "Annoteringen måste vara en identifierare"
+
 #: py/modbuiltins.c
 msgid "arg is an empty sequence"
 msgstr "arg är en tom sekvens"
@@ -2636,6 +2631,10 @@ msgstr "kan inte tilldela uttryck"
 msgid "can't convert %q to %q"
 msgstr "kan inte konvertera %q till %q"
 
+#: py/runtime.c
+msgid "can't convert %q to int"
+msgstr "kan inte konvertera %q till int"
+
 #: py/objstr.c
 msgid "can't convert '%q' object to %q implicitly"
 msgstr "kan inte konvertera '%q' objekt implicit till %q"
@@ -2644,6 +2643,10 @@ msgstr "kan inte konvertera '%q' objekt implicit till %q"
 msgid "can't convert to %q"
 msgstr "kan inte konvertera till %q"
 
+#: py/runtime.c
+msgid "can't convert to int"
+msgstr "kan inte konvertera till int"
+
 #: py/objstr.c
 msgid "can't convert to str implicitly"
 msgstr "kan inte implicit konvertera till str"
@@ -3052,7 +3055,7 @@ msgid "full"
 msgstr "full"
 
 #: py/argcheck.c
-msgid "function does not take keyword arguments"
+msgid "function doesn't take keyword arguments"
 msgstr "funktionen tar inte nyckelordsargument"
 
 #: py/argcheck.c
@@ -3107,6 +3110,10 @@ msgstr "generatorn kör redan"
 msgid "generator ignored GeneratorExit"
 msgstr "generatorn ignorerade GeneratorExit"
 
+#: py/objgenerator.c
+msgid "generator raised StopIteration"
+msgstr "generator kastade StopIteration"
+
 #: shared-bindings/_stage/Layer.c
 msgid "graphic must be 2048 bytes long"
 msgstr "graphic måste vara 2048 byte lång"
@@ -3489,6 +3496,10 @@ msgstr "native yield"
 msgid "need more than %d values to unpack"
 msgstr "behöver mer än %d värden för att packa upp"
 
+#: py/modmath.c
+msgid "negative factorial"
+msgstr "negativ faktoriell"
+
 #: py/objint_longlong.c py/objint_mpz.c py/runtime.c
 msgid "negative power with no float support"
 msgstr "negativ exponent utan stöd för flyttal"
@@ -3718,10 +3729,6 @@ msgstr "palette måste vara 32 bytes lång"
 msgid "palette_index should be an int"
 msgstr "palette_index ska vara en int"
 
-#: py/compile.c
-msgid "parameter annotation must be an identifier"
-msgstr "parametern annotation måste vara en identifierare"
-
 #: py/emitinlinextensa.c
 msgid "parameters must be registers in sequence a2 to a5"
 msgstr "parametrarna måste registreras i följd a2-a5"
@@ -3778,6 +3785,7 @@ msgstr "pow() med 3 argument kräver heltal"
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/artisense_rd00/mpconfigboard.h
+#: ports/esp32s2/boards/atmegazero_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -4163,7 +4171,7 @@ msgstr "okänd formatkod '%c' för objekt av typ '%q'"
 msgid "unknown type"
 msgstr "okänd typ"
 
-#: py/emitnative.c
+#: py/compile.c
 msgid "unknown type '%q'"
 msgstr "okänd typ '%q'"
 
@@ -4302,6 +4310,18 @@ msgstr "zi måste vara av typ float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi måste vara i formen (n_section, 2)"
 
+#~ msgid "Viper functions don't currently support more than 4 arguments"
+#~ msgstr "Viper-funktioner stöder för närvarande inte mer än fyra argument"
+
+#~ msgid "address %08x is not aligned to %d bytes"
+#~ msgstr "adressen %08x är inte justerad till %d byte"
+
+#~ msgid "function does not take keyword arguments"
+#~ msgstr "funktionen tar inte nyckelordsargument"
+
+#~ msgid "parameter annotation must be an identifier"
+#~ msgstr "parametern annotation måste vara en identifierare"
+
 #~ msgid "Total data to write is larger than outgoing_packet_length"
 #~ msgstr "Total data som ska skrivas är större än outgoing_packet_length"
 
@@ -4604,9 +4624,6 @@ msgstr "zi måste vara i formen (n_section, 2)"
 #~ msgid "can't convert to float"
 #~ msgstr "kan inte konvertera till float"
 
-#~ msgid "can't convert to int"
-#~ msgstr "kan inte konvertera till int"
-
 #~ msgid "object '%s' is not a tuple or list"
 #~ msgstr "objektet '%s' är inte en tupel eller lista"
 
diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po
index 65b016d66a..8062dfe3ee 100644
--- a/locale/zh_Latn_pinyin.po
+++ b/locale/zh_Latn_pinyin.po
@@ -2349,10 +2349,6 @@ msgstr "Zhí chángdù > zuìdà chángdù"
 msgid "Version was invalid"
 msgstr "bǎn běn wú xiào"
 
-#: py/emitnative.c
-msgid "Viper functions don't currently support more than 4 arguments"
-msgstr "Viper hánshù mùqián bù zhīchí chāoguò 4 gè cānshù"
-
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Voltage read timed out"
 msgstr "Diànyā dòu qǔ chāoshí"
@@ -2439,11 +2435,6 @@ msgstr "xūyào yīgè zì jié lèi duìxiàng"
 msgid "abort() called"
 msgstr "zhōngzhǐ () diàoyòng"
 
-#: extmod/machine_mem.c
-#, c-format
-msgid "address %08x is not aligned to %d bytes"
-msgstr "wèi zhǐ %08x wèi yǔ %d wèi yuán zǔ duìqí"
-
 #: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr "dìzhǐ chāochū biānjiè"
@@ -2452,6 +2443,10 @@ msgstr "dìzhǐ chāochū biānjiè"
 msgid "addresses is empty"
 msgstr "dìzhǐ wèi kōng"
 
+#: py/compile.c
+msgid "annotation must be an identifier"
+msgstr ""
+
 #: py/modbuiltins.c
 msgid "arg is an empty sequence"
 msgstr "cānshù shì yīgè kōng de xùliè"
@@ -2634,6 +2629,10 @@ msgstr "bùnéng fēnpèi dào biǎodá shì"
 msgid "can't convert %q to %q"
 msgstr "Wúfǎ jiāng %q zhuǎnhuàn wèi %q"
 
+#: py/runtime.c
+msgid "can't convert %q to int"
+msgstr ""
+
 #: py/objstr.c
 msgid "can't convert '%q' object to %q implicitly"
 msgstr "wúfǎ jiāng '%q' duìxiàng zhuǎnhuàn wèi %q yǐn hán"
@@ -2642,6 +2641,10 @@ msgstr "wúfǎ jiāng '%q' duìxiàng zhuǎnhuàn wèi %q yǐn hán"
 msgid "can't convert to %q"
 msgstr "wúfǎ zhuǎnhuàn wèi %q"
 
+#: py/runtime.c
+msgid "can't convert to int"
+msgstr "bùnéng zhuǎnhuàn wèi int"
+
 #: py/objstr.c
 msgid "can't convert to str implicitly"
 msgstr "bùnéng mò shì zhuǎnhuàn wèi str"
@@ -3051,8 +3054,8 @@ msgid "full"
 msgstr "chōngfèn"
 
 #: py/argcheck.c
-msgid "function does not take keyword arguments"
-msgstr "hánshù méiyǒu guānjiàn cí cānshù"
+msgid "function doesn't take keyword arguments"
+msgstr ""
 
 #: py/argcheck.c
 #, c-format
@@ -3106,6 +3109,10 @@ msgstr "shēngchéng qì yǐjīng zhíxíng"
 msgid "generator ignored GeneratorExit"
 msgstr "shēngchéng qì hūlüè shēngchéng qì tuìchū"
 
+#: py/objgenerator.c
+msgid "generator raised StopIteration"
+msgstr ""
+
 #: shared-bindings/_stage/Layer.c
 msgid "graphic must be 2048 bytes long"
 msgstr "túxíng bìxū wèi 2048 zì jié"
@@ -3486,6 +3493,10 @@ msgstr "yuán chǎn"
 msgid "need more than %d values to unpack"
 msgstr "xūyào chāoguò%d de zhí cáinéng jiědú"
 
+#: py/modmath.c
+msgid "negative factorial"
+msgstr ""
+
 #: py/objint_longlong.c py/objint_mpz.c py/runtime.c
 msgid "negative power with no float support"
 msgstr "méiyǒu fú diǎn zhīchí de xiāojí gōnglǜ"
@@ -3715,10 +3726,6 @@ msgstr "yánsè bìxū shì 32 gè zì jié"
 msgid "palette_index should be an int"
 msgstr "yánsè suǒyǐn yīnggāi shì yīgè zhěngshù"
 
-#: py/compile.c
-msgid "parameter annotation must be an identifier"
-msgstr "cānshù zhùshì bìxū shì biāozhì fú"
-
 #: py/emitinlinextensa.c
 msgid "parameters must be registers in sequence a2 to a5"
 msgstr "cānshù bìxū shì xùliè a2 zhì a5 de dēngjì shù"
@@ -3774,6 +3781,7 @@ msgstr "pow() yǒu 3 cānshù xūyào zhěngshù"
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/artisense_rd00/mpconfigboard.h
+#: ports/esp32s2/boards/atmegazero_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
@@ -4159,7 +4167,7 @@ msgstr "lèixíng '%q' de duìxiàng de wèizhī géshì dàimǎ '%c'"
 msgid "unknown type"
 msgstr "wèizhī lèixíng"
 
-#: py/emitnative.c
+#: py/compile.c
 msgid "unknown type '%q'"
 msgstr "wèizhī lèixíng '%q'"
 
@@ -4298,6 +4306,18 @@ msgstr "zi bìxū wèi fú diǎn xíng"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi bìxū jùyǒu xíngzhuàng (n_section,2)"
 
+#~ msgid "Viper functions don't currently support more than 4 arguments"
+#~ msgstr "Viper hánshù mùqián bù zhīchí chāoguò 4 gè cānshù"
+
+#~ msgid "address %08x is not aligned to %d bytes"
+#~ msgstr "wèi zhǐ %08x wèi yǔ %d wèi yuán zǔ duìqí"
+
+#~ msgid "function does not take keyword arguments"
+#~ msgstr "hánshù méiyǒu guānjiàn cí cānshù"
+
+#~ msgid "parameter annotation must be an identifier"
+#~ msgstr "cānshù zhùshì bìxū shì biāozhì fú"
+
 #~ msgid "Total data to write is larger than outgoing_packet_length"
 #~ msgstr "Yào xiě rù de zǒng shùjù dàyú outgoing_packet_length"
 
@@ -4574,9 +4594,6 @@ msgstr "zi bìxū jùyǒu xíngzhuàng (n_section,2)"
 #~ msgid "can't convert to float"
 #~ msgstr "bùnéng zhuǎnhuàn wèi fú diǎn"
 
-#~ msgid "can't convert to int"
-#~ msgstr "bùnéng zhuǎnhuàn wèi int"
-
 #~ msgid "object '%s' is not a tuple or list"
 #~ msgstr "duìxiàng '%s' bùshì yuán zǔ huò lièbiǎo"