If there is a filesystem available, this change makes sure there is a "lib"
in `sys.path`, eg so that "mip install" works correctly.
Signed-off-by: Damien George <damien@micropython.org>
Changes here make the zephyr port act the same as other ports for the
start up and shut down sequence:
- `boot.py` is executed if it exists, and can force a soft reset
- `main.py` is only executed if in friendly REPL and if `boot.py` executed
successfully; and it can also force a soft reset
- print "MPY: " before "soft reboot" on soft reset
Signed-off-by: Damien George <damien@micropython.org>
This commit renames the NORETURN macro, indicating to the compiler
that a function does not return, into MP_NORETURN to maintain the same
naming convention of other similar macros.
To maintain compaitiblity with existing code NORETURN is aliased to
MP_NORETURN, but it is also deprecated for MicroPython v2.
This changeset was created using a similar process to
decf8e6a8b ("all: Remove the "STATIC"
macro and just use "static" instead."), with no documentation or python
scripts to change to reflect the new macro name.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
This enables using the newer USB stack and its CDC ACM for the REPL.
To switch to it, board file must contain `CONFIG_USB_DEVICE_STACK_NEXT=y`
and `CONFIG_USBD_CDC_ACM_CLASS=y`. In the case of a board that is a
platform that supports the older device stack, `CONFIG_USB_DEVICE_STACK=n`
may be necessary.
Signed-off-by: Vdragon <mail@massdriver.space>
Commit 07a8e3253a2d8a2076c9c83c4ed4158fa3fbb2a2 removes
CONFIG_MMC_VOLUME_NAME from the Kconfig space. Instead we need to use
the device tree to find the "disk-name" property of "zephyr,mmc-disk"
devices.
Signed-off-by: Detlev Zundel <dzu@member.fsf.org>
Zephyr v3.2.0 deprecated include/zephyr/zephyr.h in favor of
include/zephyr/kernel.h since it only included that header.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
This commit implements the `_thread` module on the zephyr port.
Due to the fact that we are still using a rather old version of Zephyr,
`CONFIG_DYNAMIC_THREAD` is not available and therefore the stack for
threads cannot be allocated dynamically, only at compile time. So for the
time being and for the purpose of this commit, a maximum of 4 Zephyr
threads (besides the main thread) can be created. Once we manage to update
to the latest version of Zephyr this won't be a problem anymore.
Configuration for the nrf52840dk is added as part of this change, because
this board was used to test the threading support.
The Zephyr option `CONFIG_THREAD_CUSTOM_DATA` is used to enable threading
on a per board basis. The `thread.conf` file is added as a convenient way
to enable threading.
Signed-off-by: danicampora <danicampora@gmail.com>
Commit f573e73bae rewored the zephyr port to
build MicroPython as a cmake target, and since that commit the
`make-bin-testsuite` helper script no longer works (it requires a Makefile)
and hence the tinytest test framework can no longer be run.
Instead of fixing this, remove the option to use tinytest. Boards running
zephyr can use the standard `tests/run-tests.py` script to run tests in the
usual way.
Signed-off-by: Damien George <damien@micropython.org>
Use new function mp_obj_new_str_from_cstr() where appropriate. It
simplifies the code, and makes it smaller too.
Signed-off-by: Jon Foster <jon@jon-foster.co.uk>
The STATIC macro was introduced a very long time ago in commit
d5df6cd44a. The original reason for this was
to have the option to define it to nothing so that all static functions
become global functions and therefore visible to certain debug tools, so
one could do function size comparison and other things.
This STATIC feature is rarely (if ever) used. And with the use of LTO and
heavy inline optimisation, analysing the size of individual functions when
they are not static is not a good representation of the size of code when
fully optimised.
So the macro does not have much use and it's simpler to just remove it.
Then you know exactly what it's doing. For example, newcomers don't have
to learn what the STATIC macro is and why it exists. Reading the code is
also less "loud" with a lowercase static.
One other minor point in favour of removing it, is that it stops bugs with
`STATIC inline`, which should always be `static inline`.
Methodology for this commit was:
1) git ls-files | egrep '\.[ch]$' | \
xargs sed -Ei "s/(^| )STATIC($| )/\1static\2/"
2) Do some manual cleanup in the diff by searching for the word STATIC in
comments and changing those back.
3) "git-grep STATIC docs/", manually fixed those cases.
4) "rg -t python STATIC", manually fixed codegen lines that used STATIC.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
If a non-string buffer was passed to execfile, then it would be passed
as a non-null-terminated char* to mp_lexer_new_from_file.
This changes mp_lexer_new_from_file to take a qstr instead (as in almost
all cases a qstr will be created from this input anyway to set the
`__file__` attribute on the module).
This now makes execfile require a string (not generic buffer) argument,
which is probably a good fix to make anyway.
Fixes issue #12522.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Instead of being an explicit field, it's now a slot like all the other
methods.
This is a marginal code size improvement because most types have a make_new
(100/138 on PYBV11), however it improves consistency in how types are
declared, removing the special case for make_new.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
For ports with MICROPY_VFS and MICROPY_PY_IO enabled their configuration
can now be simplified to use the defaults for mp_import_stat and
mp_builtin_open.
This commit makes no functional change, except for the following minor
points:
- the built-in "open" is removed from the minimal port (it previously did
nothing)
- the duplicate built-in "input" is removed from the esp32 port
- qemu-arm now delegates to VFS import/open
Signed-off-by: Damien George <damien@micropython.org>
The following changes are made:
- If MICROPY_VFS is enabled then mp_vfs_import_stat and mp_vfs_open are
automatically used for mp_import_stat and mp_builtin_open respectively.
- If MICROPY_PY_IO is enabled then "open" is automatically included in the
set of builtins, and points to mp_builtin_open_obj.
This helps to clean up and simplify the most common port configuration.
Signed-off-by: Damien George <damien@micropython.org>
CONFIG_USB was removed in Zephyr v2.7.0 after some Kconfig rework that
made it sufficient to use CONFIG_USB_DEVICE_STACK only.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
If MICROPY_PY_SYS_PATH_ARGV_DEFAULTS is enabled (which it is by default)
then sys.path and sys.argv will be initialised and populated with default
values. This keeps all bare-metal ports aligned.
Signed-off-by: Damien George <damien@micropython.org>
Currently only advertising and scanning are supported, using the ring
buffer for events (ie not synchronous events at this stage).
The ble_gap_advertise.py multi-test passes (tested on a nucleo_wb55rg
board).
Signed-off-by: Damien George <damien@micropython.org>
Zephyr's Kconfig symbols and defaults for SDHC/SDMMC disk drivers and
the disk access subsystem were reworked between Zephyr v2.5.0 and
v2.6.0. Update MicroPython accordingly.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
And ctrl-C can now interrupt a time.sleep call. This uses Zephyr's k_poll
API to wait efficiently for an event signal, and an optional semaphore.
Signed-off-by: Damien George <damien@micropython.org>
Include storage/flash_map.h unconditionally so we always have access to the
FLASH_AREA_LABEL_EXISTS macro, even if CONFIG_FLASH_MAP is not defined.
This fixes a build error for the qemu_x86 board:
main.c:108:63: error: missing binary operator before token "("
108 | #elif defined(CONFIG_FLASH_MAP) && FLASH_AREA_LABEL_EXISTS(storage)
| ^
../../py/mkrules.mk:88: recipe for target 'build/genhdr/qstr.i.last' failed
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Supports hard and soft interrupts. In the current implementation, soft
interrupt callbacks will only be called when the VM is executing, ie they
will not be called during a blocking kernel call like k_msleep. And the
behaviour of hard interrupt callbacks will depend on the underlying device,
as well as the amount of ISR stack space.
Soft and hard interrupts tested on frdm_k64f and nucleo_f767zi boards.
Signed-off-by: Damien George <damien@micropython.org>
Note: the uncrustify configuration is explicitly set to 'add' instead of
'force' in order not to alter the comments which use extra spaces after //
as a means of indenting text for clarity.
Adds support in the zephyr port to execute main.py if the file system is
enabled and the file exists. Existing support for executing a main.py
frozen module is preserved, since pyexec_file_if_exists() works just
like pyexec_frozen_module() if there's no vfs.
Enables the zephyr usb device stack and mass storage class on the
mimxrt1050_evk board. The mass storage class is backed by the sdhc disk
access driver, so it's now possible to browse and modify the contents of
the SD card from a USB host (your PC). This is in preparation to support
writing a main.py script to the SD card, and then executing it after the
next reset.
Adds support in the zephyr port to mount a file system if a block device
(sdhc disk access or flash area) is available. The mount point is either
"/sd" or "/flash" depending on the type of block device.
Tested with an sdhc disk access block device and fatfs on the
mimxrt1050_evk board.
Tested with a flash area block device and littlefs on the reel_board.
The MP_STATE_THREAD(stack_top) is always available so use it instead of
creating a separate variable. This also allows gc_collect() to be used as
an independent function, without real_main() being called.
If TEST is defined, file it refers to will be used as the testsuite
source (should be generated with tools/tinytest-codegen.py).
"make-bin-testsuite" script is introduce to build such a binary.
Ideally, these should be configurable from Python (using network module),
but as that doesn't exist, we better off using Zephyr's native bootstrap
configuration facility.
Header files that are considered internal to the py core and should not
normally be included directly are:
py/nlr.h - internal nlr configuration and declarations
py/bc0.h - contains bytecode macro definitions
py/runtime0.h - contains basic runtime enums
Instead, the top-level header files to include are one of:
py/obj.h - includes runtime0.h and defines everything to use the
mp_obj_t type
py/runtime.h - includes mpstate.h and hence nlr.h, obj.h, runtime0.h,
and defines everything to use the general runtime support functions
Additional, specific headers (eg py/objlist.h) can be included if needed.
This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.
