This parameter is already used for PC-based tests (eg unix and webassembly
ports), and it makes sense for it to be used for bare-metal ports as well.
That way the timeout is configurable for all targets.
Because this increases the default timeout from 10s to 30s, this fixes some
long-running tests that would previously fail due to a timeout such as
`thread/stress_aes.py` on ESP32.
Signed-off-by: Damien George <damien@micropython.org>
The native emitter will not release/bounce the GIL when running code, so
if it runs tight loops then no other threads get a chance to run (if the
GIL is enabled). So for the thread tests, explicitly include a call to
`time.sleep(0)` (or equivalent) to bounce the GIL and give other threads a
chance to run.
For some tests (eg `thread_coop.py`) the whole point of the test is to test
that the GIL is correctly bounced. So for those cases force the use of the
bytecode emitter for the busy functions.
Signed-off-by: Damien George <damien@micropython.org>
When detecting the target platform, also check if it has threading and
whether the GIL is enabled or not (using the new attribute
`sys.implementation._thread`). If threading is available, add the thread
tests to the set of tests to run (unless the set of tests is explicitly
given).
With this change, the unix port no longer needs to explicitly run the set
of thread tests, so that line has been removed from the Makefile.
This change will make sure thread tests are run with other testing
combinations. In particular, thread tests are now run:
- on the unix port with the native emitter
- on macOS builds
- on unix qemu, the architectures MIPS, ARM and RISCV-64
Signed-off-by: Damien George <damien@micropython.org>
This thread stress test is quite intensive and can run for a long time on
certain targets. For example, builds with stackless enabled are slower
than non-stackless, and this test in stackless mode takes around 2 minutes
on the unix port of MicroPython with the existing parameters of
`n_thread=20` and `n_loop=5`.
It's not really necessary to test 20 threads at once, that's not really
going to test anything more than 10 at once. So reduce the parameters to
keep the running time reasonable.
Signed-off-by: Damien George <damien@micropython.org>
This is a workaround for the case where threading is enabled without a GIL.
In such a configuration, creating a new global variable is not atomic and
threads have race conditions resizing/accessing the global dict.
Signed-off-by: Damien George <damien@micropython.org>
Long long big integer support now raises an exception on overflow rather
than returning an undefined result.
Also adds an error when shifting by a negative value.
The new arithmetic checks are added in the misc.h header.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
The other performance tests run and pass with only 64-bit big integer
support.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Relies on arbitrary precision math, so won't run on a port which
has threads & limited bigint support.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
These tests cover the use of mp_obj_new_int_from_str_len when
mp_parse_num_integer overflows the SMALLINT limit, and also the case where
the value may not be null terminated.
Placed in a separate test file so that extmod/json test doesn't rely on
bigint support.
Signed-off-by: Yoctopuce dev <dev@yoctopuce.com>
Signed-off-by: Angus Gratton <angus@redyak.com.au>
These will run on all ports which support them, but importantly
they'll also run on ports that don't support arbitrary precision
but do support 64-bit long ints.
Includes some test workarounds to account for things which will overflow
once "long long" big integers overflow (added in follow-up commit):
- uctypes_array_load_store test was failing already, now won't parse.
- all the ffi_int tests contain 64-bit unsigned values, that won't parse
as long long.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This commit improves get handling by guarding against implicit unknown
symbols accessed directly by specific JS native APIs.
Fixes issue #17657.
Signed-off-by: Andrea Giammarchi <andrea.giammarchi@gmail.com>
Test 'l' and 'll' sized objects. When the platform's `mp_int_t` is not 64
bits, dummy values are printed instead so the test result can match across
all platforms.
Ensure hex test values have a letter so 'x' vs 'X' is tested.
And test 'p' and 'P' pointer printing.
Signed-off-by: Jeff Epler <jepler@gmail.com>
This commit adds a fast-path optimisation for when a BUILD_SLICE is
immediately followed by a LOAD/STORE_SUBSCR for a native type, to avoid
needing to allocate the slice on the heap.
In some cases (e.g. `a[1:3] = x`) this can result in no allocations at all.
We can't do this for instance types because the get/set/delattr
implementation may keep a reference to the slice.
Adds more tests to the basic slice tests to ensure that a stack-allocated
slice never makes it to Python, and also a heapalloc test that verifies
(when using bytecode) that assigning to a slice is no-alloc.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
This adds call to release UDP port in a timely manner, so they can be
reused in subsequent tests. Otherwise, one could face issue like #17623.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
The test `micropython/ringio_async.py` is a test that requires async
keyword support, and will fail with SyntaxError on targets that don't
support async/await. Really it should be skipped on such targets, and this
commit makes sure that's the case.
Signed-off-by: Damien George <damien@micropython.org>
The test runner expects `print("SKIP")` to be followed by
`raise SystemExit`. Otherwise it waits for 10 seconds for the target to
do a soft reset before timing out and continuing.
Signed-off-by: Damien George <damien@micropython.org>
Some targets don't have f-strings enabled, so try not to use them in tests.
Rather, use `str.format`, which is more portable.
Signed-off-by: Damien George <damien@micropython.org>
This is code makes sure that time functions work properly on a
reasonable date range, on all platforms, regardless of the epoch.
The suggested minimum range is 1970 to 2099.
In order to reduce code footprint, code to support far away dates
is only enabled specified by the port.
New types are defined to identify timestamps.
The implementation with the smallest code footprint is when
support timerange is limited to 1970-2099 and Epoch is 1970.
This makes it possible to use 32 bit unsigned integers for
all timestamps.
On ARM4F, adding support for dates up to year 3000 adds
460 bytes of code. Supporting dates back to 1600 adds
another 44 bytes of code.
Signed-off-by: Yoctopuce dev <dev@yoctopuce.com>
This commit provides helpers to retrieve integer values from
mp_obj_t when the content does not fit in a 32 bits integer,
without risking an implicit wrap due to an int overflow.
Signed-off-by: Yoctopuce dev <dev@yoctopuce.com>
Eg on PYBV10 with THREAD variant, the firmware has both the `_thread` and
`socket` modules but no NIC.
Signed-off-by: Damien George <damien@micropython.org>
This tests that the RXIDLE callback is called correctly after a second lot
of bytes are received.
Signed-off-by: Damien George <damien@micropython.org>
On stm32, the hardware generates an RXIDLE IRQ after enabling the UART,
because the RX line is technically idle.
Signed-off-by: Damien George <damien@micropython.org>
The additional overhead of the settrace profiler means that the
`aes_stress.py` test was running too slowly on GitHub CI. Double the
timeout to 60 seconds.
Signed-off-by: Jeff Epler <jepler@gmail.com>
The unix coverage variant should have all features enabled, so they can be
tested for coverage. Therefore, enabled `MICROPY_PY_SYS_SETTRACE`.
Signed-off-by: Jeff Epler <jepler@gmail.com>
JavaScript code uses "Symbol in object" to brand check its own proxies, and
such checks should also work on the Python side.
Signed-off-by: Andrea Giammarchi <andrea.giammarchi@gmail.com>
This commit introduces a mechanism to customise the code that is
injected to the board when performing a test file upload and execution.
A new argument, --begin", is added so regular Python code can be
inserted in the injected fragment between the module file creation and
the effective file import. This is needed for running larger tests
(usually ones that have been pre-compiled with
"--via-mpy --emit native") on ESP8266, as that board does not have
enough memory to fit certain blocks of code unless additional
configuration is performed.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
This commit reworks the Viper pointer boundary tests in order to make
them more accurate and easier to extend.
The tests are now easier to reason about in their output, using easier
to read values, and bit thresholds are now more configurable. If a new
conditional code sequence is introduced, adding a new bit threshold is
just a matter of adding a value into a tuple at the beginning of the
relevant test file.
Load tests have also been made more accurate, with better function
templates to test register-indexed operations.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
Add check to prevent calling recv on a socket in the listening state. This
prevents a crash/hard fault when user code mistakenly tries to recv on the
listening socket instead of on the accepted connection.
Add corresponding test case to demonstrate the bug.
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
CPython math.nan is positive with regards to copysign. The signaling bit
(aka sign flag) was incorrectly set.
In addition, REPR_C and REPR_D should only use the _true_ nan to prevent
system crash in case of hand-crafted floats. For instance, with REPR_C,
any nan-like float following the pattern
`01111111 1xxxxxxx xxxxxxxx xxxxx1xx` would be switched to an immediate
object or a qstr string. When the qstr index is too large, this would
cause a crash.
This commit fixes the issue, and adds the relevant test cases.
Signed-off-by: Yoctopuce dev <dev@yoctopuce.com>
When the symbol `__all__` is defined in a module, `mp_import_all()` should
import all listed symbols into the global environment, rather than relying
on the underscore-is-private default. This is the standard in CPython.
Each item is loaded in the same way as if it would be an explicit import
statement, and will invoke the module's `__getattr__` function if needed.
This provides a straightforward solution for fixing star import of modules
using a dynamic loader, such as `extmod/asyncio` (see issue #7266).
This improvement has been enabled at BASIC_FEATURES level, to avoid
impacting devices with limited ressources, for which star import is of
little use anyway.
Additionally, detailled reporting of errors during `__all__` import has
been implemented to match CPython, but this is only enabled when
ERROR_REPORTING is set to MICROPY_ERROR_REPORTING_DETAILED.
Signed-off-by: Yoctopuce dev <dev@yoctopuce.com>
Any '_' variables/functions in frozen modules are currently printed, when
they shouldn't be. That's due to underscore names possibly existing
between the start and end qstrs which are used to print the auto-complete
matches. The underscore names should be skipped when iterating between the
two boundary qstrs.
The underscore attributes are removed from the extra coverage exp file
because tab completing "import <tab>" no longer lists modules beginning
with an underscore.
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
This allows having {\xDD} in tests, which will be expanded to the given
hex character.
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
Previously, there was no test coverage of the "write failed" path. In
fact, the assertion would fire instead of gracefully raising a Python
exception.
Slightly re-organize the code to place the assertion later. Add a test
case which exercises all paths, and update the expected output.
Signed-off-by: Jeff Epler <jepler@gmail.com>
In #17384 it was decided that fixing this difference was not worth the code
size increase. So document it instead.
Signed-off-by: Jeff Epler <jepler@gmail.com>
In the case where an mpz number is zero, its `len` is 0 and its `dig` is
NULL. In that case, decrementing NULL via `d--` is undefined behavior
according to the C specification.
Restructuring the loops in this way avoids undefined behavior.
Also, ensure that these cases are tested in the coverage test. This
doesn't make much difference now, but would otherwise cause errors later
when the undefined behavior sanitizer is employed in CI.
Signed-off-by: Jeff Epler <jepler@gmail.com>
Reuse the `create_test_report()` function from `run-tests.py` to generate a
`_result.json` file summarising the test run.
Signed-off-by: Damien George <damien@micropython.org>
Reuse the `create_test_report()` function from `run-tests.py` to generate a
`_result.json` file summarising the test run.
Signed-off-by: Damien George <damien@micropython.org>
Reuse the `create_test_report()` function from `run-tests.py` to generate a
`_result.json` file summarising the test run. If there's more than one
permutation of the test run, only the last result is saved.
Signed-off-by: Damien George <damien@micropython.org>
This commit factors existing code in `run-tests.py` into a new helper
function `create_test_report()`. That function prints out a summary of the
test run (eg number of tests passed, number failed, number skipped) and
creates the corresponding `_results.json` file.
This is done so `create_test_report()` can be reused by the other test
runners.
The `test_count` counter is now gone, and instead the number of passed plus
number of failed tests is used as an equivalent count.
For consistency this commit makes a minor change to the printed output of
`run-tests.py`: instead of printing a shorthand name for tests that failed
or skipped, it now prints the full name. Eg what was previously printed as
`attrtuple2` is now printed as `basics/attrtuple2.py`. This makes the
output a little longer (when there are failed/skipped tests) but helps to
disambiguate the test name, eg which directory it's in.
Signed-off-by: Damien George <damien@micropython.org>
This test was factored out from `random_extra.py` back in commit
6572029dc0, and the skip logic copied from
that file. But the skip logic needs to test that the `random` and
`uniform` functions exist, not `randint`.
This commit fixes that skip logic.
Signed-off-by: Damien George <damien@micropython.org>
If a complex literal had a negative real part and a positive imaginary
part, it was not parsed properly because the imaginary part also came out
negative.
Includes a test of complex parsing, which fails without this fix.
Co-authored-by: ComplexSymbol <141301057+ComplexSymbol@users.noreply.github.com>
Signed-off-by: Jeff Epler <jepler@gmail.com>
As suggested by @dpgeorge, factor out part of array_construct to allow it
to be used for construction & extension.
Note that extending with a known-length list (or tuple) goes through the
slow path of calling array_extend once per element.
Fixes issue #7408.
Signed-off-by: Jeff Epler <jepler@gmail.com>
This commit lets the test runner enumerate and run native tests if the
feature check fails but native tests were explicitly requested from the
command line.
The old behaviour would disable native tests anyway if the feature check
failed, however this hid a bug in the x86 native emitter that would be
triggered even during the feature check. That meant the test suite
would pass on x86 even with a broken emitter, as those tests would have
been skipped anyway.
Now, if the user asks for native code it will get native code out of the
runner no matter what.
Co-authored-by: Damien George <damien@micropython.org>
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
Some tests are just too big for targets that don't have much heap memory,
eg `tests/extmod/vfs_rom.py`. Other tests are too large because the target
doesn't have enough IRAM for native code, eg esp8266 running
`tests/micropython/viper_args.py`.
Previously, such tests were explicitly skipped on targets known to have
little memory, eg esp8266. But this doesn't scale to multiple targets, nor
to more and more tests which are too large.
This commit addresses that by adding logic to the test runner so it can
automatically skip tests when they don't fit in the target's memory. It
does this by prepending a `print('START TEST')` to every test, and if a
`MemoryError` occurs before that line is printed then the test was too big.
This works for standard tests, tests that go via .mpy files, and tests that
run in native emitter mode via .mpy files.
For tests that are too big, it prints `lrge <test name>` on the output,
and at the end prints them on a separate line of skipped tests so they can
be distinguished. They are also distinguished in the `_result.json` file
as a skipped test with reason "too large".
Signed-off-by: Damien George <damien@micropython.org>
This commit introduces a mechanism to customise the code that is
injected to the board when performing a native module import.
A new argument, "-b"/"--begin", is added so regular Python code can be
inserted in the injected fragment between the module file creation and
the effective module import. This is needed for running natmod tests on
ESP8266 as that board does not have enough memory to fit certain modules
unless additional configuration is performed.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
Test modified to reschedule itself based on a flag setting. Without the
change in the parent commit, this test executes the callback indefinitely
and hangs but with the change it runs only once each time
mp_handle_pending() is called.
Modified-by: Angus Gratton <angus@redyak.com.au>
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
Currently the `FrameBuffer.blit(buf, x, y)` method requires the `buf`
argument to be another `FrameBuffer`, which is quite restrictive because it
doesn't allow blit'ing read-only memory/data.
This commit extends `blit()` to allow the `buf` argument to be a tuple or
list of the form:
(buffer, width, height, format[, stride])
where `buffer` can be anything with the buffer protocol and may be
read-only, eg `bytes`.
Also, the palette argument to `blit()` may be of the same form.
The form of this tuple/list was chosen to be the same as the signature of
the `FrameBuffer` constructor (that saves quite a bit of code size doing it
that way).
Signed-off-by: Damien George <damien@micropython.org>
The `_results.json` output of `run-tests.py` was recently changed in
7a55cb6b36 to add a list of passed and
skipped tests.
The way this was done turned out to be not general enough, because we want
to add another type of result, namely tests that are skipped because they
are too large.
Instead of having separate lists in `_results.json` for each kind of result
(pass, fail, skip, skip too large, etc), this commit changes the output
form of `_results.json` so that it stores a single list of 3-tuples of all
tests that were run:
[(test_name, result, reason), ...]
That's more general and allows adding a reason for skipped and failed
tests. At the moment this reason is just an empty string, but can be
improved in the future.
Signed-off-by: Damien George <damien@micropython.org>
This commit expands the Xtensa inline assembler to support most if not
all opcodes available on the ESP8266 and LX3 Xtensa cores.
This is meant as a stepping stone to add inline assembler support for
the ESP32 and its LX6 core, along to windowed-specific opcodes and
additional opcodes that are present only on the LX7 core (ESP32-S3 and
later).
New opcodes being added are covered by tests, and the provided tests
were expanded to also include opcodes available in the existing
implementation. Given that the ESP8266 space requirements are tighter
than ESP32's, certain opcodes that won't be commonly used have been put
behind a define to save some space in the general use case.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
The existing test for `math.e` and `math.pi` constants can fail on certain
targets if the functions `math.exp()` and/or `math.cos()` are not accurate
enough (eg out by an LSB of float precision). For example this test
currently fails on PYBD_SF6 which uses double precision floats (and that's
due to the `lib/libm_dbl/exp.c` implementation not being exact).
This commit changes this constant test so that it tests the actual constant
value, not the evaluation of `exp()` and `cos()` functions.
Signed-off-by: Damien George <damien@micropython.org>
This commit adds a series of test cases to exercise the Viper code
generator load/store emitting capabilities on certain boundary
conditions.
The new test cases check whether the emitted load/store code performs
correctly when dealing with specific memory offsets, which trigger
specific code generation sequences on different architectures.
Right now the cases are for unsigned offsets whose bitmasks span up to
5, 8, and 12 bits (respectively Arm/Thumb, Xtensa, RV32).
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
This commit makes the JSON parser raise an exception when handling
objects or arrays whose declaration is incomplete, as in missing the
closing marker (brace or bracket) and if the missing marker would have
been the last non-whitespace character in the incoming string.
Since CPython's JSON parser would raise an exception in such a case,
unlike MicroPython's, this commit aligns MicroPython's behaviour with
CPython.
This commit fixes issue #17141.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
The output `_result.json` file generated by `run-tests.py` currently
contains a list of failed tests. This commit adds to the output a list of
passed and skipped tests, and so now provides full information about which
tests were run and what their results were.
Signed-off-by: Damien George <damien@micropython.org>
This groups non-decimal values by fours, such as bbb_bbbb_bbbb. It also
supports `{:_d}` to use underscore for decimal numbers (grouped in threes).
Use of incorrect ":,b" is not diagnosed.
Thanks to @dpgeorge for the suggestion to reduce code size.
Signed-off-by: Jeff Epler <jepler@gmail.com>
There's no specified behaviour for what should happen if both CPUs call
`lightsleep()` together, but the latest changes could cause a permanent
hang due to a race in the timer cleanup code. Add a flag to prevent hangs
if two threads accidentally lightsleep, at least.
This allows the new lightsleep test to pass on RPI_PICO and RPI_PICO2, and
even have much tighter time deltas. However, the test still fails on
wireless boards where the lwIP tick wakes them up too frequently.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This commit adds a new network multi-test which sends a burst of UDP
packets from the client, and the server doesn't recv them until they have
all been sent.
Signed-off-by: Damien George <damien@micropython.org>
Otherwise if the target has certain files/directories (such as "test") in
its filesystem then these interfere with the unit tests.
Signed-off-by: Damien George <damien@micropython.org>
The Let's Encrypt root certificate has changed so needs updating in these
tests.
Also use `bytes.fromhex()` instead of `binascii.unhexlify()`, to eliminate
the need for the `binascii` module. Both of these features are controlled
by `MICROPY_PY_BUILTINS_BYTES_HEX`, so the test will still work on the same
targets that it previously did.
Signed-off-by: Damien George <damien@micropython.org>
Going above the root directory (/../foo) now gives an error. This is an
intentional change made by LittleFS. It required a update of the testsuite
and is a (minor) compatibility break.
Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
This commit fixes three open issues related to the asyncio scheduler
exiting prematurely when the main task queue is empty, in cases where
CPython would not exit (for example, because the main task is not done
because it's on a different queue).
In the first case, the scheduler exits because running a task via
`run_until_complete` did not schedule any dependent tasks.
In the other two cases, the scheduler exits because the tasks are queued in
an event queue.
Tests have been added which reproduce the original issues. These test
cases document the unauthorized use of `Event.set()` from a soft IRQ, and
are skipped in unsupported environments (webassembly and native emitter).
Fixes issues #16759, #16569 and #16318.
Signed-off-by: Yoctopuce dev <dev@yoctopuce.com>
Fixes thread safety issue that could cause memory corruption on ports
with (MICROPY_PY_THREAD && !MICROPY_PY_THREAD_GIL) - currently only rp2 and
unix have this configuration.
Adds unit test for TLS sockets that exercises this code path. I wasn't
able to make this fail on rp2, the race condition window is pretty narrow
and may not have a direct impact on a quiet system.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Changes in this commit:
- Allow the DMA instance to be any instance, not just DMA(0); eg WLAN may
be using DMA(0).
- Make the DMA timing test run a little faster by preloading `dma.active`.
- Run the DMA timing test 10 times and take the average time taken as the
test result, to eliminate any big effects of caching.
- Change the expected time to `range(30, 80)` to cover RP2040, RP2350,
RISC-V variants, and both bytecode and native emitter.
- Add a `sleep_ms(1)` after waiting for the IRQ to fire, so that any
scheduled code gets a chance to run when the test is compiled with the
native emitter.
With these changes this test passes reliably on RPI_PICO, RPI_PICO_W,
RPI_PICO2, RPI_PICO2_W, RPI_PICO2-RISCV and RPI_PICO2_W-RISCV, in both
bytecode and native emitter mode, with and without WLAN enabled.
Signed-off-by: Damien George <damien@micropython.org>
Only a few ports have TCP/IP loopback enabled in their network stack, and
this test will only pass on those ports. There's not really any good way
to do a feature check for loopback mode without actually running the test
and seeing if it passes/fails, so add an explicit check that the test is
running on a port known to support loopback.
(Enabling loopback on lwIP, eg RPI_PICO_W, costs +568 code and +272 bss and
is a rarely used feature, so not worth unconditionally enabling.)
Signed-off-by: Damien George <damien@micropython.org>
This commit makes a slight change to the vfs_posix test suite to let it
pass on Android.
On Android, non-root processes can perform most filesystem operations
only on a restricted set of directories. The vfs_posix test suite
attempted to enumerate the filesystem root directory, and said directory
happens to be restricted for non-root processes. This would raise
an EACCES OSError and terminate the test with a unexpected failure.
To fix this, rather than enumerating the filesystem root directory the
enumeration target is the internal shared storage area root - which
doesn't have enumeration restrictions for non-root processes. The path
is hardcoded because it is guaranteed to be there on pretty much any
recent-ish device for now (it stayed the same for more than a decade for
compatibility reasons). The proper way would be to query the storage
subsystem via a JNI round-trip call, but this introduces too much
complexity for something that is unlikely to break going forward.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
This fix handles attrtuple as well, eg. os.uname(). A test case has been
added in basics/attrtuple2.py.
Fixes issue #16969.
Signed-off-by: Yoctopuce dev <dev@yoctopuce.com>
MicroPython support for this behaviour was added in eb45d97898.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Since 7c1584aef1 MicroPython matches CPython in most cases, aside from
nested comprehensions.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
