This is code makes sure that time functions work properly on a
reasonable date range, on all platforms, regardless of the epoch.
The suggested minimum range is 1970 to 2099.
In order to reduce code footprint, code to support far away dates
is only enabled specified by the port.
New types are defined to identify timestamps.
The implementation with the smallest code footprint is when
support timerange is limited to 1970-2099 and Epoch is 1970.
This makes it possible to use 32 bit unsigned integers for
all timestamps.
On ARM4F, adding support for dates up to year 3000 adds
460 bytes of code. Supporting dates back to 1600 adds
another 44 bytes of code.
Signed-off-by: Yoctopuce dev <dev@yoctopuce.com>
This commit provides helpers to retrieve integer values from
mp_obj_t when the content does not fit in a 32 bits integer,
without risking an implicit wrap due to an int overflow.
Signed-off-by: Yoctopuce dev <dev@yoctopuce.com>
Eg on PYBV10 with THREAD variant, the firmware has both the `_thread` and
`socket` modules but no NIC.
Signed-off-by: Damien George <damien@micropython.org>
This tests that the RXIDLE callback is called correctly after a second lot
of bytes are received.
Signed-off-by: Damien George <damien@micropython.org>
On stm32, the hardware generates an RXIDLE IRQ after enabling the UART,
because the RX line is technically idle.
Signed-off-by: Damien George <damien@micropython.org>
The additional overhead of the settrace profiler means that the
`aes_stress.py` test was running too slowly on GitHub CI. Double the
timeout to 60 seconds.
Signed-off-by: Jeff Epler <jepler@gmail.com>
The unix coverage variant should have all features enabled, so they can be
tested for coverage. Therefore, enabled `MICROPY_PY_SYS_SETTRACE`.
Signed-off-by: Jeff Epler <jepler@gmail.com>
JavaScript code uses "Symbol in object" to brand check its own proxies, and
such checks should also work on the Python side.
Signed-off-by: Andrea Giammarchi <andrea.giammarchi@gmail.com>
This commit introduces a mechanism to customise the code that is
injected to the board when performing a test file upload and execution.
A new argument, --begin", is added so regular Python code can be
inserted in the injected fragment between the module file creation and
the effective file import. This is needed for running larger tests
(usually ones that have been pre-compiled with
"--via-mpy --emit native") on ESP8266, as that board does not have
enough memory to fit certain blocks of code unless additional
configuration is performed.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
This commit reworks the Viper pointer boundary tests in order to make
them more accurate and easier to extend.
The tests are now easier to reason about in their output, using easier
to read values, and bit thresholds are now more configurable. If a new
conditional code sequence is introduced, adding a new bit threshold is
just a matter of adding a value into a tuple at the beginning of the
relevant test file.
Load tests have also been made more accurate, with better function
templates to test register-indexed operations.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
Add check to prevent calling recv on a socket in the listening state. This
prevents a crash/hard fault when user code mistakenly tries to recv on the
listening socket instead of on the accepted connection.
Add corresponding test case to demonstrate the bug.
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
CPython math.nan is positive with regards to copysign. The signaling bit
(aka sign flag) was incorrectly set.
In addition, REPR_C and REPR_D should only use the _true_ nan to prevent
system crash in case of hand-crafted floats. For instance, with REPR_C,
any nan-like float following the pattern
`01111111 1xxxxxxx xxxxxxxx xxxxx1xx` would be switched to an immediate
object or a qstr string. When the qstr index is too large, this would
cause a crash.
This commit fixes the issue, and adds the relevant test cases.
Signed-off-by: Yoctopuce dev <dev@yoctopuce.com>
When the symbol `__all__` is defined in a module, `mp_import_all()` should
import all listed symbols into the global environment, rather than relying
on the underscore-is-private default. This is the standard in CPython.
Each item is loaded in the same way as if it would be an explicit import
statement, and will invoke the module's `__getattr__` function if needed.
This provides a straightforward solution for fixing star import of modules
using a dynamic loader, such as `extmod/asyncio` (see issue #7266).
This improvement has been enabled at BASIC_FEATURES level, to avoid
impacting devices with limited ressources, for which star import is of
little use anyway.
Additionally, detailled reporting of errors during `__all__` import has
been implemented to match CPython, but this is only enabled when
ERROR_REPORTING is set to MICROPY_ERROR_REPORTING_DETAILED.
Signed-off-by: Yoctopuce dev <dev@yoctopuce.com>
Any '_' variables/functions in frozen modules are currently printed, when
they shouldn't be. That's due to underscore names possibly existing
between the start and end qstrs which are used to print the auto-complete
matches. The underscore names should be skipped when iterating between the
two boundary qstrs.
The underscore attributes are removed from the extra coverage exp file
because tab completing "import <tab>" no longer lists modules beginning
with an underscore.
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
This allows having {\xDD} in tests, which will be expanded to the given
hex character.
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
Previously, there was no test coverage of the "write failed" path. In
fact, the assertion would fire instead of gracefully raising a Python
exception.
Slightly re-organize the code to place the assertion later. Add a test
case which exercises all paths, and update the expected output.
Signed-off-by: Jeff Epler <jepler@gmail.com>
In #17384 it was decided that fixing this difference was not worth the code
size increase. So document it instead.
Signed-off-by: Jeff Epler <jepler@gmail.com>
In the case where an mpz number is zero, its `len` is 0 and its `dig` is
NULL. In that case, decrementing NULL via `d--` is undefined behavior
according to the C specification.
Restructuring the loops in this way avoids undefined behavior.
Also, ensure that these cases are tested in the coverage test. This
doesn't make much difference now, but would otherwise cause errors later
when the undefined behavior sanitizer is employed in CI.
Signed-off-by: Jeff Epler <jepler@gmail.com>
Reuse the `create_test_report()` function from `run-tests.py` to generate a
`_result.json` file summarising the test run.
Signed-off-by: Damien George <damien@micropython.org>
Reuse the `create_test_report()` function from `run-tests.py` to generate a
`_result.json` file summarising the test run.
Signed-off-by: Damien George <damien@micropython.org>
Reuse the `create_test_report()` function from `run-tests.py` to generate a
`_result.json` file summarising the test run. If there's more than one
permutation of the test run, only the last result is saved.
Signed-off-by: Damien George <damien@micropython.org>
This commit factors existing code in `run-tests.py` into a new helper
function `create_test_report()`. That function prints out a summary of the
test run (eg number of tests passed, number failed, number skipped) and
creates the corresponding `_results.json` file.
This is done so `create_test_report()` can be reused by the other test
runners.
The `test_count` counter is now gone, and instead the number of passed plus
number of failed tests is used as an equivalent count.
For consistency this commit makes a minor change to the printed output of
`run-tests.py`: instead of printing a shorthand name for tests that failed
or skipped, it now prints the full name. Eg what was previously printed as
`attrtuple2` is now printed as `basics/attrtuple2.py`. This makes the
output a little longer (when there are failed/skipped tests) but helps to
disambiguate the test name, eg which directory it's in.
Signed-off-by: Damien George <damien@micropython.org>
This test was factored out from `random_extra.py` back in commit
6572029dc0, and the skip logic copied from
that file. But the skip logic needs to test that the `random` and
`uniform` functions exist, not `randint`.
This commit fixes that skip logic.
Signed-off-by: Damien George <damien@micropython.org>
If a complex literal had a negative real part and a positive imaginary
part, it was not parsed properly because the imaginary part also came out
negative.
Includes a test of complex parsing, which fails without this fix.
Co-authored-by: ComplexSymbol <141301057+ComplexSymbol@users.noreply.github.com>
Signed-off-by: Jeff Epler <jepler@gmail.com>
As suggested by @dpgeorge, factor out part of array_construct to allow it
to be used for construction & extension.
Note that extending with a known-length list (or tuple) goes through the
slow path of calling array_extend once per element.
Fixes issue #7408.
Signed-off-by: Jeff Epler <jepler@gmail.com>
This commit lets the test runner enumerate and run native tests if the
feature check fails but native tests were explicitly requested from the
command line.
The old behaviour would disable native tests anyway if the feature check
failed, however this hid a bug in the x86 native emitter that would be
triggered even during the feature check. That meant the test suite
would pass on x86 even with a broken emitter, as those tests would have
been skipped anyway.
Now, if the user asks for native code it will get native code out of the
runner no matter what.
Co-authored-by: Damien George <damien@micropython.org>
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
Some tests are just too big for targets that don't have much heap memory,
eg `tests/extmod/vfs_rom.py`. Other tests are too large because the target
doesn't have enough IRAM for native code, eg esp8266 running
`tests/micropython/viper_args.py`.
Previously, such tests were explicitly skipped on targets known to have
little memory, eg esp8266. But this doesn't scale to multiple targets, nor
to more and more tests which are too large.
This commit addresses that by adding logic to the test runner so it can
automatically skip tests when they don't fit in the target's memory. It
does this by prepending a `print('START TEST')` to every test, and if a
`MemoryError` occurs before that line is printed then the test was too big.
This works for standard tests, tests that go via .mpy files, and tests that
run in native emitter mode via .mpy files.
For tests that are too big, it prints `lrge <test name>` on the output,
and at the end prints them on a separate line of skipped tests so they can
be distinguished. They are also distinguished in the `_result.json` file
as a skipped test with reason "too large".
Signed-off-by: Damien George <damien@micropython.org>
This commit introduces a mechanism to customise the code that is
injected to the board when performing a native module import.
A new argument, "-b"/"--begin", is added so regular Python code can be
inserted in the injected fragment between the module file creation and
the effective module import. This is needed for running natmod tests on
ESP8266 as that board does not have enough memory to fit certain modules
unless additional configuration is performed.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
Test modified to reschedule itself based on a flag setting. Without the
change in the parent commit, this test executes the callback indefinitely
and hangs but with the change it runs only once each time
mp_handle_pending() is called.
Modified-by: Angus Gratton <angus@redyak.com.au>
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
Currently the `FrameBuffer.blit(buf, x, y)` method requires the `buf`
argument to be another `FrameBuffer`, which is quite restrictive because it
doesn't allow blit'ing read-only memory/data.
This commit extends `blit()` to allow the `buf` argument to be a tuple or
list of the form:
(buffer, width, height, format[, stride])
where `buffer` can be anything with the buffer protocol and may be
read-only, eg `bytes`.
Also, the palette argument to `blit()` may be of the same form.
The form of this tuple/list was chosen to be the same as the signature of
the `FrameBuffer` constructor (that saves quite a bit of code size doing it
that way).
Signed-off-by: Damien George <damien@micropython.org>
The `_results.json` output of `run-tests.py` was recently changed in
7a55cb6b36 to add a list of passed and
skipped tests.
The way this was done turned out to be not general enough, because we want
to add another type of result, namely tests that are skipped because they
are too large.
Instead of having separate lists in `_results.json` for each kind of result
(pass, fail, skip, skip too large, etc), this commit changes the output
form of `_results.json` so that it stores a single list of 3-tuples of all
tests that were run:
[(test_name, result, reason), ...]
That's more general and allows adding a reason for skipped and failed
tests. At the moment this reason is just an empty string, but can be
improved in the future.
Signed-off-by: Damien George <damien@micropython.org>
This commit expands the Xtensa inline assembler to support most if not
all opcodes available on the ESP8266 and LX3 Xtensa cores.
This is meant as a stepping stone to add inline assembler support for
the ESP32 and its LX6 core, along to windowed-specific opcodes and
additional opcodes that are present only on the LX7 core (ESP32-S3 and
later).
New opcodes being added are covered by tests, and the provided tests
were expanded to also include opcodes available in the existing
implementation. Given that the ESP8266 space requirements are tighter
than ESP32's, certain opcodes that won't be commonly used have been put
behind a define to save some space in the general use case.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
The existing test for `math.e` and `math.pi` constants can fail on certain
targets if the functions `math.exp()` and/or `math.cos()` are not accurate
enough (eg out by an LSB of float precision). For example this test
currently fails on PYBD_SF6 which uses double precision floats (and that's
due to the `lib/libm_dbl/exp.c` implementation not being exact).
This commit changes this constant test so that it tests the actual constant
value, not the evaluation of `exp()` and `cos()` functions.
Signed-off-by: Damien George <damien@micropython.org>
This commit adds a series of test cases to exercise the Viper code
generator load/store emitting capabilities on certain boundary
conditions.
The new test cases check whether the emitted load/store code performs
correctly when dealing with specific memory offsets, which trigger
specific code generation sequences on different architectures.
Right now the cases are for unsigned offsets whose bitmasks span up to
5, 8, and 12 bits (respectively Arm/Thumb, Xtensa, RV32).
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
This commit makes the JSON parser raise an exception when handling
objects or arrays whose declaration is incomplete, as in missing the
closing marker (brace or bracket) and if the missing marker would have
been the last non-whitespace character in the incoming string.
Since CPython's JSON parser would raise an exception in such a case,
unlike MicroPython's, this commit aligns MicroPython's behaviour with
CPython.
This commit fixes issue #17141.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
The output `_result.json` file generated by `run-tests.py` currently
contains a list of failed tests. This commit adds to the output a list of
passed and skipped tests, and so now provides full information about which
tests were run and what their results were.
Signed-off-by: Damien George <damien@micropython.org>
This groups non-decimal values by fours, such as bbb_bbbb_bbbb. It also
supports `{:_d}` to use underscore for decimal numbers (grouped in threes).
Use of incorrect ":,b" is not diagnosed.
Thanks to @dpgeorge for the suggestion to reduce code size.
Signed-off-by: Jeff Epler <jepler@gmail.com>
There's no specified behaviour for what should happen if both CPUs call
`lightsleep()` together, but the latest changes could cause a permanent
hang due to a race in the timer cleanup code. Add a flag to prevent hangs
if two threads accidentally lightsleep, at least.
This allows the new lightsleep test to pass on RPI_PICO and RPI_PICO2, and
even have much tighter time deltas. However, the test still fails on
wireless boards where the lwIP tick wakes them up too frequently.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This commit adds a new network multi-test which sends a burst of UDP
packets from the client, and the server doesn't recv them until they have
all been sent.
Signed-off-by: Damien George <damien@micropython.org>
Otherwise if the target has certain files/directories (such as "test") in
its filesystem then these interfere with the unit tests.
Signed-off-by: Damien George <damien@micropython.org>
The Let's Encrypt root certificate has changed so needs updating in these
tests.
Also use `bytes.fromhex()` instead of `binascii.unhexlify()`, to eliminate
the need for the `binascii` module. Both of these features are controlled
by `MICROPY_PY_BUILTINS_BYTES_HEX`, so the test will still work on the same
targets that it previously did.
Signed-off-by: Damien George <damien@micropython.org>
Going above the root directory (/../foo) now gives an error. This is an
intentional change made by LittleFS. It required a update of the testsuite
and is a (minor) compatibility break.
Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
This commit fixes three open issues related to the asyncio scheduler
exiting prematurely when the main task queue is empty, in cases where
CPython would not exit (for example, because the main task is not done
because it's on a different queue).
In the first case, the scheduler exits because running a task via
`run_until_complete` did not schedule any dependent tasks.
In the other two cases, the scheduler exits because the tasks are queued in
an event queue.
Tests have been added which reproduce the original issues. These test
cases document the unauthorized use of `Event.set()` from a soft IRQ, and
are skipped in unsupported environments (webassembly and native emitter).
Fixes issues #16759, #16569 and #16318.
Signed-off-by: Yoctopuce dev <dev@yoctopuce.com>
Fixes thread safety issue that could cause memory corruption on ports
with (MICROPY_PY_THREAD && !MICROPY_PY_THREAD_GIL) - currently only rp2 and
unix have this configuration.
Adds unit test for TLS sockets that exercises this code path. I wasn't
able to make this fail on rp2, the race condition window is pretty narrow
and may not have a direct impact on a quiet system.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Changes in this commit:
- Allow the DMA instance to be any instance, not just DMA(0); eg WLAN may
be using DMA(0).
- Make the DMA timing test run a little faster by preloading `dma.active`.
- Run the DMA timing test 10 times and take the average time taken as the
test result, to eliminate any big effects of caching.
- Change the expected time to `range(30, 80)` to cover RP2040, RP2350,
RISC-V variants, and both bytecode and native emitter.
- Add a `sleep_ms(1)` after waiting for the IRQ to fire, so that any
scheduled code gets a chance to run when the test is compiled with the
native emitter.
With these changes this test passes reliably on RPI_PICO, RPI_PICO_W,
RPI_PICO2, RPI_PICO2_W, RPI_PICO2-RISCV and RPI_PICO2_W-RISCV, in both
bytecode and native emitter mode, with and without WLAN enabled.
Signed-off-by: Damien George <damien@micropython.org>
Only a few ports have TCP/IP loopback enabled in their network stack, and
this test will only pass on those ports. There's not really any good way
to do a feature check for loopback mode without actually running the test
and seeing if it passes/fails, so add an explicit check that the test is
running on a port known to support loopback.
(Enabling loopback on lwIP, eg RPI_PICO_W, costs +568 code and +272 bss and
is a rarely used feature, so not worth unconditionally enabling.)
Signed-off-by: Damien George <damien@micropython.org>
This commit makes a slight change to the vfs_posix test suite to let it
pass on Android.
On Android, non-root processes can perform most filesystem operations
only on a restricted set of directories. The vfs_posix test suite
attempted to enumerate the filesystem root directory, and said directory
happens to be restricted for non-root processes. This would raise
an EACCES OSError and terminate the test with a unexpected failure.
To fix this, rather than enumerating the filesystem root directory the
enumeration target is the internal shared storage area root - which
doesn't have enumeration restrictions for non-root processes. The path
is hardcoded because it is guaranteed to be there on pretty much any
recent-ish device for now (it stayed the same for more than a decade for
compatibility reasons). The proper way would be to query the storage
subsystem via a JNI round-trip call, but this introduces too much
complexity for something that is unlikely to break going forward.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
This fix handles attrtuple as well, eg. os.uname(). A test case has been
added in basics/attrtuple2.py.
Fixes issue #16969.
Signed-off-by: Yoctopuce dev <dev@yoctopuce.com>
MicroPython support for this behaviour was added in eb45d97898.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Since 7c1584aef1 MicroPython matches CPython in most cases, aside from
nested comprehensions.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This is needed if you chdir to a ROMFS and want to query your current
directory.
Prior to this change, using `os.getcwd()` when in a ROMFS would raise:
AttributeError: 'VfsRom' object has no attribute 'getcwd'
Signed-off-by: Damien George <damien@micropython.org>
Allocation of a large compression window may fail, and in that case keep
the `DeflateIO` state consistent so its other methods (such as `close()`)
still work. Consistency is kept by only updating the `self->write` member
if the window allocation succeeds.
Thanks to @jimmo for finding the bug.
Signed-off-by: Damien George <damien@micropython.org>
Currently only classic CAN, but tests run on both the stm32 classic CAN
controller and the FD-CAN controller with the same results.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
For a given MicroPython firmware/executable it can be sometimes important
to know how it was built, which variant/board configuration it came from.
This commit adds a new field `sys.implementation._build` that can help
identify the configuration that MicroPython was built with.
For now it's either:
* <VARIANT> for unix, webassembly and windows ports
* <BOARD>-<VARIANT> for microcontroller ports (the variant is optional)
In the future additional elements may be added to this string, separated by
a hyphen.
Resolves issue #16498.
Signed-off-by: Damien George <damien@micropython.org>
This won't be generated normally, but a failed run (for example, from a
unittest with an error or which doesn't call unittest.main()) will
generate one.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This change allows tuples to be passed as the prefix/suffix argument to the
`str.startswith()` and `str.endswith()` methods. The methods will return
`True` if the string starts/ends with any of the prefixes/suffixes in the
tuple.
Also adds full support for the `start` and `end` arguments to both methods
for compatibility with CPython.
Tests have been updated for the new behaviour.
Signed-off-by: Glenn Moloney <glenn.moloney@gmail.com>
The mantissa parsing code uses a floating point variable to accumulate
digits. Using an `mp_float_uint_t` variable instead and casting to
`mp_float_t` at the very end reduces code size. In some cases, it also
improves the rounding behaviour as extra digits are taken into account
by the int-to-float conversion code.
An extra test case handles the special case where mantissa overflow occurs
while processing deferred trailing zeros.
Signed-off-by: Yoctopuce dev <dev@yoctopuce.com>
Testing with ROMFS shows that it is relatively easy to end up with a
corrupt filesystem on the device -- eg due to the ROMFS deploy process
stopping half way through -- which could lead to hard crashes. Notably,
there can be boot loops trying to mount a corrupt filesystem, crashes when
importing modules like `os` that first scan the filesystem for `os.py`, and
crashing when deploying a new ROMFS in certain cases because the old one is
removed while still mounted.
The main problem is that `mp_decode_uint()` has an loop that keeps going as
long as it reads 0xff byte values, which can happen in the case of erased
and unwritten flash.
This commit adds full bounds checking in the new `mp_decode_uint_checked()`
function, and that makes all ROMFS filesystem accesses robust.
Signed-off-by: Damien George <damien@micropython.org>
This adds a multi-test for DTLS server and client behaviour. It works on
all ports that enable this feature (eg unix, esp32, rp2, stm32), but
bare-metal ports that use lwIP are not reliable as the DTLS server because
the lwIP bindings only support queuing one UDP packet at a time (that needs
to be fixed).
Also, to properly implement a DTLS server sockets need to support
`socket.recvfrom(n, MSG_PEEK)`. That can be implemented in the future.
Signed-off-by: Damien George <damien@micropython.org>
This commit enables support for DTLS, i.e. TLS over datagram transport
protocols like UDP. While support for DTLS is absent in CPython, it is
worth supporting it in MicroPython because it is the basis of the
ubiquitous CoAP protocol, used in many IoT projects.
To select DTLS, a new set of "protocols" are added to SSLContext:
- ssl.PROTOCOL_DTLS_CLIENT
- ssl.PROTOCOL_DTLS_SERVER
If one of these is set, the library assumes that the underlying socket is a
datagram-like socket (i.e. UDP or similar).
Our own timer callbacks are implemented because the out of the box
implementation relies on `gettimeofday()`.
This new DTLS feature is enabled on all ports that use mbedTLS.
This commit is an update to a previous PR #10062.
Addresses issue #5270 which requested DTLS support.
Signed-off-by: Keenan Johnson <keenan.johnson@gmail.com>
It's not necessary to support this, which allows an arbitrary memory
address to be specified and potentially allows invalid memory accesses.
Requiring an object with the buffer protocol is safer, and also means that
the length of the region is always specified.
Signed-off-by: Damien George <damien@micropython.org>
This commit implements a small subset of the CPython `marshal` module. It
implements `marshal.dumps()` and `marshal.loads()`, but only supports
(un)marshalling code objects at this stage. The semantics match CPython,
except that the actual marshalled bytes is not compatible with CPython's
marshalled bytes.
The module is enabled at the everything level (only on the unix coverage
build at this stage).
Signed-off-by: Damien George <damien@micropython.org>
This allows retrieving the code object of a function using
`function.__code__`, and then reconstructing a function from a code object
using `FunctionType(code_object)`.
This feature is controlled by `MICROPY_PY_FUNCTION_ATTRS_CODE` and is
enabled at the full-features level.
Signed-off-by: Damien George <damien@micropython.org>
This commit lets the natmod tests runner to automatically detect the
architecture of the test target. This allows to avoid to explicitly
pass the architecture name to the runner in test scripts.
However, the ability to manually specify a target was not removed but it
was made optional. This way the user is able to override the
architecture name if needed (like if one wants to test an armv6 MPY on
an armv7 board).
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
