Do NOT use `mp_hal_delay_us()` for short delays. This was initially done
to make short delays precise, but it does not allow for scheduling. Leave
using `mp_hal_delay_us()` to user code if needed.
Signed-off-by: robert-hh <robert@hammelrath.com>
These docs now match the code in `extmod/machine_uart.c`. IRQ trigger
support still need to be updated for each port (to be done in a follow-up
commit).
Signed-off-by: Damien George <damien@micropython.org>
By default, the peripheral clock for UART and SPI is set to 48 MHz and will
not be affected by the MCU clock change. This can be changed by a second
argument to `machine.freq(freq, peripheral_freq)`. The second argument
must be either 48 MHz or identical with the first argument.
Note that UART and SPI baud rates may have to be re-configured after
changing the MCU clock.
Signed-off-by: robert-hh <robert@hammelrath.com>
Introduce SRC_USERMOD_LIB_ASM to allow users to include assembly files as
part of their user modules. It could be used to include optimized
functions or outputs of other programming languages.
Signed-off-by: George Hopkins <george-hopkins@null.net>
A lot of existing code (i.e. micropython-lib lps22h, lcd160cr sensor
drivers, lora sync_modem driver, usb-device-hid) calls machine.idle()
inside a tight loop that is polling some condition. This reduces the power
usage compared to constantly looping, but can be faster than calling a
sleep function. However on a tickless port there's not always an interrupt
before the condition they are polling for, so it's difficult to restructure
this code if machine.idle() doesn't have any upper limit on execution time.
This commit specifies an upper limit of 1ms before machine.idle() resumes
execution. This is already the case for all ports except rp2.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Fixes and improvements to `int.to_bytes()` are:
- No longer overflows if byte size is 0 (closes#13041).
- Raises OverflowError in any case where number won't fit into byte length
(now matches CPython, previously MicroPython would return a truncated
bytes object).
- Document that `micropython int.to_bytes()` doesn't implement the optional
signed kwarg, but will behave as if `signed=True` when the integer is
negative (this is the current behaviour). Add tests for this also.
Requires changes for small ints, MPZ large ints, and "long long" large
ints.
Adds a new set of unit tests for ints between 32 and 64 bits to increase
coverage of "long long" large ints, which are otherwise untested.
Tested on unix port (64 bit small ints, MPZ long ints) and Zephyr STM32WB
board (32 bit small ints, long long large ints).
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
MPY files can now hold generated RV32IMC native code. This can be
accomplished by passing the `-march=rv32imc` flag to mpy-cross.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
For ESP32C3/S2/S3 IDFv5 exposes new internal temperature API which is
different to the base ESP32, IDFv4.
Thanks to @robert-hh for cleaner code and testing sensor capability in
these devices.
See discussion #10443.
Signed-off-by: Rick Sorensen <rick.sorensen@gmail.com>
In the case where an OUT control transfer triggers with wLength==0 (i.e.
all data sent in the SETUP phase, and no additional data phase) the
callbacks were previously implemented to return b"" (i.e. an empty buffer
for the data phase).
However this didn't actually work as intended because b"" can't provide a
RW buffer (needed for OUT transfers with a data phase to write data into),
so actually the endpoint would stall.
The symptom was often that the device process the request (if processing
it in the SETUP phase when all information was already available), but the
host sees the endpoint stall and eventually returns an error.
This commit changes the behaviour so returning True from the SETUP phase of
a control transfer queues a zero length status response.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This commit implements the 'e' half-float format: 10-bit mantissa, 5-bit
exponent. It uses native _Float16 if supported by the compiler, otherwise
uses custom bitshifting encoding/decoding routines.
Signed-off-by: Matthias Urlichs <matthias@urlichs.de>
Signed-off-by: Damien George <damien@micropython.org>
This new machine-module driver provides a "USBDevice" singleton object and
a shim TinyUSB "runtime" driver that delegates the descriptors and all of
the TinyUSB callbacks to Python functions. This allows writing arbitrary
USB devices in pure Python. It's also possible to have a base built-in
USB device implemented in C (eg CDC, or CDC+MSC) and a Python USB device
added on top of that.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Prior to this commit, the pin defined for power would be used by the
esp_idf driver to reset the PHY. That worked, but sometimes the MDIO
configuration started before the power was fully settled, leading to an
error.
With the change in this commit, the power for the PHY is independently
enabled in network_lan.c with a 100ms delay to allow the power to settle.
A separate define for a reset pin is provided, even if the PHY reset
pin is rarely connected.
Fixes issue #14013.
Signed-off-by: robert-hh <robert@hammelrath.com>
The STATIC macro was introduced a very long time ago in commit
d5df6cd44a. The original reason for this was
to have the option to define it to nothing so that all static functions
become global functions and therefore visible to certain debug tools, so
one could do function size comparison and other things.
This STATIC feature is rarely (if ever) used. And with the use of LTO and
heavy inline optimisation, analysing the size of individual functions when
they are not static is not a good representation of the size of code when
fully optimised.
So the macro does not have much use and it's simpler to just remove it.
Then you know exactly what it's doing. For example, newcomers don't have
to learn what the STATIC macro is and why it exists. Reading the code is
also less "loud" with a lowercase static.
One other minor point in favour of removing it, is that it stops bugs with
`STATIC inline`, which should always be `static inline`.
Methodology for this commit was:
1) git ls-files | egrep '\.[ch]$' | \
xargs sed -Ei "s/(^| )STATIC($| )/\1static\2/"
2) Do some manual cleanup in the diff by searching for the word STATIC in
comments and changing those back.
3) "git-grep STATIC docs/", manually fixed those cases.
4) "rg -t python STATIC", manually fixed codegen lines that used STATIC.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Allows bytecode itself to be used instead of an mp_raw_code_t in the simple
and common cases of a bytecode function without any children.
This can be used to further reduce frozen code size, and has the potential
to optimise other areas like importing.
Signed-off-by: Damien George <damien@micropython.org>
This commit changes how library packages are searched for when a manifest
file is loaded: there is now simply a list of library paths that is
searched in order for the given package. This list defaults to the
main directories in micropython-lib, but can be added to -- either appended
or prepended -- by using `add_library()`.
In particular the way unix-ffi library packages are searched has changed,
because the `unix_ffi` argument to `require()` is now removed. Instead, if
a build wants to include packages from micropython-lib/unix-ffi, then it
must explicitly add this to the list of paths to search using:
add_library("unix-ffi", "$(MPY_LIB_DIR)/unix-ffi")
Work done in collaboration with Jim Mussared.
Signed-off-by: Damien George <damien@micropython.org>
Required modifying the gen-cpydiff.py code to allow a "preamble" section to
be inserted at the top of any of the generated files.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Codespell doesn't pick up "re-used" or "re-uses", and ignores the tests/
directory, so fix these manually.
Signed-off-by: Damien George <damien@micropython.org>
Fixes a wrong assignment for Sparkfun SAMD51 Thing Plus, and updates the
sample script for printing the pin info table.
Signed-off-by: robert-hh <robert@hammelrath.com>
Add `load_cert_chain`, `load_verify_locations`, `get_ciphers` and
`set_ciphers` SSLContext methods in ssl library, and update asyncio
`open_connection` and `start_server` methods with ssl support.
Signed-off-by: Carlos Gil <carlosgilglez@gmail.com>
The behaviour described in the docs was not correct for either port.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
If you have a variable frequency and pulse width, and you want to optimize
pulse resolution, then you must do a calculation beforehand to ensure you
normalize the array to keep all list values within bound. That calculation
requires RMT.source_freq(), RMT.clock_div(), and this 32767 constant.
Signed-off-by: Mark Blakeney <mark.blakeney@bullet-systems.net>
To create an esp32.RMT() instance with an optimum (i.e. highest resolution)
clock_div is currently awkward because you need to know the source clock
frequency to calculate the best clock_div, but unfortunately that is only
currently available as an source_freq() method on the instance after you
have already created it. So RMT.source_freq() should really be a class
method, not an instance method. This change is backwards compatible for
existing code because you can still reference that function from an
instance, or now also, from the class.
Signed-off-by: Mark Blakeney <mark.blakeney@bullet-systems.net>
This is a code factoring to have the Python bindings in one location, and
all the ports use those same bindings. At this stage only esp32 implements
this class, so the code for the bindings comes from that port.
The documentation is also updated to reflect the esp32's behaviour of
ADCBlock.connect().
Signed-off-by: Damien George <damien@micropython.org>
This updates a small number of files that change with ruff-format's (vs
black's) rules.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This is just scaffolding for now, but the idea is that there should be an
addition to this file for every commit that uses the
`MICROPY_PREVIEW_VERSION_2` macro.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
See https://github.com/micropython/micropython/issues/12127 for details.
Previously at the point when a release is made, we update mpconfig.h
and set a git tag. i.e. the version increments at the release.
Now the version increments immediately after the release. The workflow is:
1. Final commit in the cycle updates mpconfig.h to set (X, Y, 0, 0) (i.e.
clear the pre-release state).
2. This commit is tagged "vX.Y.0".
3. First commit for the new cycle updates mpconfig.h to set (X, Y+1, 0, 1)
(i.e. increment the minor version, set the pre-release state).
4. This commit is tagged "vX.Y+1.0-preview".
The idea is that a nightly build is actually a "preview" of the _next_
release. i.e. any documentation describing the current release may not
actually match the nightly build. So we use "preview" as our semver
pre-release identifier.
Changes in this commit:
- Add MICROPY_VERSION_PRERELEASE to mpconfig.h to allow indicating that
this is not a release version.
- Remove unused MICROPY_VERSION integer.
- Append "-preview" to MICROPY_VERSION_STRING when the pre-release state
is set.
- Update py/makeversionhdr.py to no longer generate MICROPY_GIT_HASH.
- Remove the one place MICROPY_GIT_HASH was used (it can use
MICROPY_GIT_TAG instead).
- Update py/makeversionhdr.py to also understand
MICROPY_VERSION_PRERELEASE in mpconfig.h.
- Update py/makeversionhdr.py to convert the git-describe output into
semver-compatible "X.Y.Z-preview.N.gHASH".
- Update autobuild.sh to generate filenames using the new scheme.
- Update remove_old_firmware.py to match new scheme.
- Update mpremote's pyproject.toml to handle the "-preview" suffix in the
tag. setuptools_scm maps to this "rc0" to match PEP440.
- Fix docs heading where it incorrectly said "vvX.Y.Z" for release docs.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This changes from the previous limit of 15 characters. Although DHCP and
mDNS allow for up to 63, ESP32 and ESP8266 only allow 32, so this seems
like a reasonable limit to enforce across all ports (and avoids wasting the
additional memory).
Also clarifies that `MICROPY_PY_NETWORK_HOSTNAME_MAX_LEN` does not include
the null terminator (which was unclear before).
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
sdkconfig.base: Add CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP=y.
This reduces time to boot from deepsleep by at least 200ms and can
provide significant power savings for deepsleep-based battery
applications.
docs/library/esp32.rst: Add note cautioning not to enter deepsleep after
changing the boot partition, without first performing a hard reset.
Signed-off-by: Glenn Moloney <glenn.moloney@gmail.com>
The primary purpose of this commit is to make decompress default to
wbits=15 when the format is gzip (or auto format with gzip detected). The
idea is that someone decompressing a gzip stream should be able to use the
default `deflate.DeflateIO(f)` and it will "just work" for any input
stream, even though it uses a lot of memory.
This is done by making uzlib report gzip files as having wbits set to 15
in their header (where it previously only set the wbits out parameter for
zlib files), and then fixing up the logic in `deflateio_init_read`.
Updates the documentation to match.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This is the minimum C interface to allow a modem driver to be built in
Python. Interface is simple, with the intention that the micropython-lib
driver is the main (only) consumer of it.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Via MICROPY_GC_SPLIT_HEAP_AUTO feature flag added in previous commit.
Tested on ESP32 GENERIC_SPIRAM and GENERIC_S3 configurations, with some
worst-case allocation patterns and the standard test suite.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
When building for a specific board this must be specified in make
submodules. I.e. make BOARD=STM32F769DISC submodules.
Signed-off-by: Rene Straub <rene@see5.ch>
Also update zlib & gzip docs to describe the micropython-lib modules.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
- Update guide for extending built-in modules.
- Remove any last trace of umodule in other docs.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
In order to keep "import umodule" working, the existing mechanism is
replaced with a simple fallback to drop the "u".
This makes importing of built-ins no longer touch the filesystem, which
makes a typical built-in import take ~0.15ms rather than 3-5ms.
(Weak links were added in c14a81662c)
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
For SAMD21 devices, the board flash signals must be named in pins.csv as
FLASH_MOSI, FLASH_MISO, FLASH_SCK, FLASH_CS for creating the SPI object.
And rename the QSPI pins to QSPI_xxxx instead of FLASH_xxx.
Signed-off-by: robert-hh <robert@hammelrath.com>
Changes in this commit:
- Add a extra detail to each of the commands.
- Add more about handling options and arguments.
- Include shortcut commands that behave like real commands to the command
list (e.g. bootloader, rtc).
- Add extra information and reword to address common misconceptions, in
particular how commands chain together.
- Add additional examples showing some more interesting combinations.
- Add descriptions to each of the examples.
- Add pipx installation instructions.
- Describe how user-configuration works.
This work was sponsored by Google Season of Docs.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
- Make the docs match the new behavior which only allows certain modules
to be extended.
- List the modules that currently have the u-prefix.
- Add a note about the sys.path method for forcing a built-in import.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
By specifying rts=pin(x) and/or cts=Pin(x) in the constructor. The pad
numbers for the UART pins are fix in this case: TX must be at pad 0, RX at
pad 1, RTS at pad 2 and CTS at pad 3.
repr(uart) shows the pin names for rts and cts, if set. In case of a RX
overflow, the rx interrupt will be disabled instead of just discarding the
data. That allows RTS to act.
If RTS is inactive, still 2 bytes can be buffered in the FIFO.
Signed-off-by: robert-hh <robert@hammelrath.com>
This commit adds the "--escape-non-printable" option to the repl command.
When specified the REPL console will escape non-printable characters,
printing them as their hex value in square brackets.
This escaping behaviour was previously the default and only behaviour, but
it is now opt-in.
As part of this change, the speed of echoing device data to the console is
improved by by reading and writing in chunks.
Signed-off-by: Damien George <damien@micropython.org>
This commit enables the ULP for the S2 and S3 chips.
Note this is the FSM (Finite State Machine) ULP.
Signed-off-by: Patrick Joy <patrick@joytech.com.au>
Update docs/library/espnow.rst to add:
- guidance on using WLAN.config(pm=WLAN.PM_NONE) for reliable
espnow performance while also connected to a wifi access point;
- guidance on receiving encrypted messages;
- correction for default value of "encrypt" parameter (add_peer());
- guidance on use of ESPNow.irq(): recommand users readout all messages
in the buffer each time the callback is called.
Signed-off-by: Glenn Moloney <glenn.moloney@gmail.com>
Currently rp2.StateMachine.exec(instr_in) requires that the instr_in
parameter be a string representing the PIO assembly language instruction
to be encoded by rp2.asm_pio_encode(). This commit allows the parameter
to also be of integral type. This is useful if the exec() method is
being called often where the use of pre-encoded machine code is
desireable.
This commit still supports calls like:
sm.exec("set(0, 1)")
It also now supports calls like:
# Performed once earlier, maybe in __init__()
assembled_instr = rp2.asm_pio_encode("out(y, 8)", 0)
# Performed multiple times later as the PIO state machine is
# configured for its next run.
sm.exec(assembled_instr)
The existing examples/rp2/pio_exec.py and examples/rp2/pio_pwm.py that
exercise the rp2.StateMachine.exec() method still work with this change.
Signed-off-by: Adam Green <adamgrym@yahoo.com>
This documents when MPY v6.1 was released.
Also add some clarification on how the version is encoded in the header.
Signed-off-by: David Lechner <david@pybricks.com>
For esp32 and esp8266 this commit adds:
- a 'pm' option to WLAN.config() to set/get the wifi power saving mode; and
- PM_NONE, PM_PERFORMANCE and PM_POWERSAVE constants to the WLAN class.
This API should be general enough to use with all WLAN drivers.
Documentation is also added.
This adds the freq and duty_u16 keyword settings to the constructor, and
sometimes other details in the PWM section.
For mimxrt a clarification regarding the PWM invert argument was added, and
for rp2 a few words were spent on PWM output pairs of a channel/slice.
The PWM.init() method has been added. Calling init() without arguments
restarts a PWM channel stopped with deinit(). Otherwise single parameters
except for "device=n" can be changed again. The device can only be
specified once, either in the constructor or the first init() call.
Also simplify get_pwm_config() and get_adc_config(), and shrink the PWM
object.
ESP-NOW is a proprietary wireless communication protocol which supports
connectionless communication between ESP32 and ESP8266 devices, using
vendor specific WiFi frames. This commit adds support for this protocol
through a new `espnow` module.
This commit builds on original work done by @nickzoic, @shawwwn and with
contributions from @zoland. Features include:
- Use of (extended) ring buffers in py/ringbuf.[ch] for robust IO.
- Signal strength (RSSI) monitoring.
- Core support in `_espnow` C module, extended by `espnow.py` module.
- Asyncio support via `aioespnow.py` module (separate to this commit).
- Docs provided at `docs/library/espnow.rst`.
Methods available in espnow.ESPNow class are:
- active(True/False)
- config(): set rx buffer size, read timeout and tx rate
- recv()/irecv()/recvinto() to read incoming messages from peers
- send() to send messages to peer devices
- any() to test if a message is ready to read
- irq() to set callback for received messages
- stats() returns transfer stats:
(tx_pkts, tx_pkt_responses, tx_failures, rx_pkts, lost_rx_pkts)
- add_peer(mac, ...) registers a peer before sending messages
- get_peer(mac) returns peer info: (mac, lmk, channel, ifidx, encrypt)
- mod_peer(mac, ...) changes peer info parameters
- get_peers() returns all peer info tuples
- peers_table supports RSSI signal monitoring for received messages:
{peer1: [rssi, time_ms], peer2: [rssi, time_ms], ...}
ESP8266 is a pared down version of the ESP32 ESPNow support due to code
size restrictions and differences in the low-level API. See docs for
details.
Also included is a test suite in tests/multi_espnow. This tests basic
espnow data transfer, multiple transfers, various message sizes, encrypted
messages (pmk and lmk), and asyncio support.
Initial work is from https://github.com/micropython/micropython/pull/4115.
Initial import of code is from:
https://github.com/nickzoic/micropython/tree/espnow-4115.
Changes in this commit:
- Change MICROPY_HW_BOARD_NAME definition to match the product name.
- Rename board folder's name to match the product name style.
- Change related files like Makefile, document descriptions, test cases, CI
and tools.
Signed-off-by: Takeo Takahashi <takeo.takahashi.xv@renesas.com>
This replaces the previous pending operation queue (that used to also be
shared with pending server notify/indicate ops) with a single pending
operation per connection. This allows the value handle to be correctly
passed to the Python-level events.
Also re-structure GATT client event handling to simplify the packet handler
functions.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Makes gatts_notify and gatts_indicate work in the same way: by default they
send the DB value, but you can manually override the payload.
In other words, makes gatts_indicate work the same as gatts_notify.
Note: This removes support for queuing notifications and indications on
btstack when the ACL buffer is full. This functionality will be
reimplemented in a future commit.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This commit adds support for the `timeout` keyword argument to machine.I2C
on the rp2 port, following how it's done on other ports.
The main motivation here is avoid the interpreter crashing due to infinite
loops when SDA is stuck low, which is quite common if the board gets reset
while reading from an I2C device.
A default timeout of 50ms is chosen because it's consistent with:
- Commit a707fe50b0 which used a timeout of
50,000us for zero-length writes on the rp2 port.
- The machine.SoftI2C class which uses 50,000us as the default timeout.
- The stm32 port's hardware I2C, which uses 50,000us for
I2C_POLL_DEFAULT_TIMEOUT_US.
This commit also fixes the default timeout on the esp32 port to be
consistent with the above, and updates the documentation for machine.I2C to
document this keyword argument.
This function seems to work fine in multi-core applications now.
The delay is now in units of microseconds instead of depending on the clock
speed, and is adjustable by board configuration headers.
Also added documentation.
By using the phase jitter between the DFLL48M clock and the FDPLL96M clock.
Even if both use the same reference source, they have a different jitter.
SysTick is driven by FDPLL96M, the us counter by DFLL48M. As a random
source, the us counter is read out on every SysTick and the value is used
to accumulate a simple multiply, add and xor register. According to tests
it creates about 30 bit random bit-flips per second. That mechanism will
pass quite a few RNG tests, has a suitable frequency distribution and
serves better than just the time after boot to seed the PRNG.
This ensures the same number of cycles are used for LED on and LED off in
the PIO 1Hz example. It's also possible to swap the first set() and the
irq() to avoid using an extra instruction, but this tutorial is a good
example of how to calculate the cycles.
Signed-off-by: Stig Bjørlykke <stig@bjorlykke.org>
This required to add two functions down the stack to uart.c and ra.sci.c.
- One for telling, whther the transmission is busy.
- One for reporting the size of the TX buffer.
Tested with a EK-RA6M2 board.
ADC: The argument of vref=num is an integer. Values for num are:
SAMD21:
0 INT1V 1.0V voltage reference
1 INTVCC0 1/1.48 Analog voltage supply
2 INTVCC1 1/2 Analog voltage supply (only for VDDANA > 2.0V)
3 VREFA External reference
4 VREFB External reference
SAMD51:
0 INTREF internal bandgap reference
1 INTVCC1 Analog voltage supply
2 INTVCC0 1/2 Analog voltage supply (only for VDDANA > 2.0v)
3 AREFA External reference A
4 AREFB External reference B
5 AREFC External reference C (ADC1 only)
DAC: The argument of vref=num is an integer. Suitable values:
SAMD21:
0 INT1V Internal voltage reference
1 VDDANA Analog voltage supply
2 VREFA External reference
SAMD51:
0 INTREF Internal bandgap reference
1 VDDANA Analog voltage supply
2 VREFAU Unbuffered external voltage reference (not buffered in DAC)
4 VREFAB Buffered external voltage reference (buffered in DAC).
This change makes it so the compiler and persistent code loader take a
mp_compiled_module_t* as their last argument, instead of returning this
struct. This eliminates a duplicate context variable for all callers of
these functions (because the context is now stored in the
mp_compiled_module_t by the caller), and also eliminates any confusion
about which context to use after the mp_compile_to_raw_code or
mp_raw_code_load function returns (because there is now only one context,
that stored in mp_compiled_module_t.context).
Reduces code size by 16 bytes on ARM Cortex-based ports.
Signed-off-by: Damien George <damien@micropython.org>
On MacOS and Windows there are a few default serial devices that are
returned by `serial.tools.list_ports.comports()`. For example on MacOS:
```
{'description': 'n/a',
'device': '/dev/cu.Bluetooth-Incoming-Port',
'hwid': 'n/a',
'interface': None,
'location': None,
'manufacturer': None,
'name': 'cu.Bluetooth-Incoming-Port',
'pid': None,
'product': None,
'serial_number': None,
'vid': None}
{'description': 'n/a',
'device': '/dev/cu.wlan-debug',
'hwid': 'n/a',
'interface': None,
'location': None,
'manufacturer': None,
'name': 'cu.wlan-debug',
'pid': None,
'product': None,
'serial_number': None,
'vid': None}
```
Users of mpremote most likely do not want to connect to these ports. It
would be desirable if mpremote did not select this ports when using the
auto connect behavior. These serial ports do not have USB VID or PID
values and serial ports for Micropython boards with FTDI/serial-to-USB
adapter or native USB CDC/ACM support do.
Check for the presence of a USB VID / PID int value when selecting a
serial port to auto connect to. All serial ports will still be listed by
the `list` command and can still be selected by name when connecting.
Signed-off-by: Michael Mogenson <michael.mogenson@gmail.com>
This shows how ports can add their own custom types/classes.
It is part of the unix coverage build, so we can use it for tests too.
Signed-off-by: Laurens Valk <laurens@pybricks.com>
Prior to this commit, the actual I2C frequency can be faster than specified
one and it may exceed the I2C's specification for Fast Mode. The frequency
of SCL should be less than or equal to 400KHz in Fast Mode.
This commit fixes this issue for F4 MCUs by rounding up the division in the
frequency calculation.
Changes in this commit:
- Change file system size from 128KB to 64KB in ra6m1_ek.ld.
- Change EK-RA6M1's file system size in renesas-ra port document.
Signed-off-by: Takeo Takahashi <takeo.takahashi.xv@renesas.com>
When looking at latest (the default for docs.micropython.org), make it
clear that this isn't the release version.
- Changes the version in the top-left to "latest".
- Adds a message to the top of each page to explain.
For future release versions, add a short message to link to the latest
version.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Removes the need for the port to add anything to OBJS or SRC_QSTR.
Also makes it possible for user-C-modules to differentiate between code
that should be processed for QSTR vs other files (e.g. helpers and
libraries).
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This supports the same package sources as the new `mip` tool.
- micropython-lib (by name)
- http(s) & github packages with json description
- directly downloading a .py/.mpy file
The version is specified with an optional `@version` on the end of the
package name. The target dir, index, and mpy/no-mpy can be set through
command line args.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Updates all README.md and docs, and manifests to `require("mip")`.
Also extend and improve the documentation on freezing and packaging.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
