.github/workflows/pre-commit.yml

@@ -13,7 +13,7 @@ jobs:
     runs-on: ubuntu-20.04
     steps:
     - uses: actions/checkout@v1
-    - uses: actions/setup-python@v2
+    - uses: actions/setup-python@v1
     - name: set PY
       run: echo >>$GITHUB_ENV "PY=$(python -c 'import hashlib, sys;print(hashlib.sha256(sys.version.encode()+sys.executable.encode()).hexdigest())')"
     - uses: actions/cache@v1

.github/workflows/test.yml

@@ -8,27 +8,16 @@ on: [pull_request, push]
 
 jobs:
   test:
-    strategy:
+    runs-on: ubuntu-latest
-      matrix:
-        python-version:
-        - '3.7'
-        - '3.x'
-
-        os-version:
-        - ubuntu-latest
-        - windows-latest
-        - macos-latest
-
-    runs-on: ${{ matrix.os-version }}
     steps:
     - name: Dump GitHub context
       env:
         GITHUB_CONTEXT: ${{ toJson(github) }}
       run: echo "$GITHUB_CONTEXT"
-    - name: Set up Python
+    - name: Set up Python 3.6
-      uses: actions/setup-python@v2
+      uses: actions/setup-python@v1
       with:
-        python-version: ${{ matrix.python-version }}
+        python-version: 3.6
     - name: Versions
       run: |
         python3 --version
@@ -39,7 +28,7 @@ jobs:
     - name: Install deps
       run: |
         pip install --upgrade pip
-        pip install -r tests_requirements.txt
+        pip install -r $GITHUB_WORKSPACE/tests_requirements.txt
     - name: Run cookiecutter tests
       run: |
         pytest -v

.gitignore

@@ -1,31 +1,16 @@
-# SPDX-FileCopyrightText: 2022 Kattni Rembor, written for Adafruit Industries
+# SPDX-FileCopyrightText: 2017 Scott Shawcroft, written for Adafruit Industries
 #
-# SPDX-License-Identifier: MIT
+# SPDX-License-Identifier: Unlicense
 
-# cookiecutter-specific files
+.venv
-.cookie_test/
+.env
-.pytest*
+.python-version
 
-# CircuitPython-specific files
-*.mpy
-
-# Python-specific files
-__pycache__
 *.pyc
 
-# Sphinx build-specific files
+.pytest*
-_build
+__pycache__
 
-# This file results from running `pip -e install .` in a local repository
+.cookie_test/
-*.egg-info
 
-# Virtual environment-specific files
+.vscode/
-.env
-
-# MacOS-specific files
-*.DS_Store
-
-# IDE-specific files
-.idea
-.vscode
-*~

.pre-commit-config.yaml

@@ -3,13 +3,13 @@
 # SPDX-License-Identifier: Unlicense
 
 repos:
-- repo: https://github.com/fsfe/reuse-tool
+-   repo: https://github.com/fsfe/reuse-tool
-  rev: v0.14.0
+    rev: v0.12.1
-  hooks:
+    hooks:
-  - id: reuse
+    - id: reuse
-- repo: https://github.com/pre-commit/pre-commit-hooks
+-   repo: https://github.com/pre-commit/pre-commit-hooks
-  rev: v4.2.0
+    rev: v2.3.0
-  hooks:
+    hooks:
-  - id: check-yaml
+    -   id: check-yaml
-  - id: end-of-file-fixer
+    -   id: end-of-file-fixer
-  - id: trailing-whitespace
+    -   id: trailing-whitespace

.reuse/dep5

@@ -1,12 +0,0 @@
-Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
-Upstream-Name: cookiecutter-adafruit-circuitpython
-Upstream-Contact: support@adafruit.com
-Source: https://github.com/adafruit/cookiecutter-adafruit-circuitpython/
-
-Files: {{ cookiecutter.__dirname }}/docs
-Copyright: 2017 Scott Shawcroft, written for Adafruit Industries
-License: MIT
-
-Files: {{ cookiecutter.__dirname }}/docs/_static
-Copyright: 2018 Phillip Torrone for Adafruit Industries
-License: MIT

CODE_OF_CONDUCT.md

@@ -82,7 +82,8 @@ In any situation, you may send an email to <support@adafruit.com>.
 On the Adafruit Discord, you may send an open message from any channel
 to all Community Moderators by tagging @community moderators. You may
 also send an open message from any channel, or a direct message to
-any Community Moderator.
+@kattni#1507, @tannewt#4653, @danh#1614, @cater#2442,
+@sommersoft#0222, @Mr. Certainly#0472 or @Andon#8175.
 
 Email and direct message reports will be kept confidential.
 
@@ -93,18 +94,18 @@ you should also report the message directly to Discord.
 These are the steps for upholding our community’s standards of conduct.
 
 1. Any member of the community may report any situation that violates the
-   Adafruit Community Code of Conduct. All reports will be reviewed and
+Adafruit Community Code of Conduct. All reports will be reviewed and
-   investigated.
+investigated.
 2. If the behavior is an egregious violation, the community member who
-   committed the violation may be banned immediately, without warning.
+committed the violation may be banned immediately, without warning.
 3. Otherwise, moderators will first respond to such behavior with a warning.
 4. Moderators follow a soft "three strikes" policy - the community member may
-   be given another chance, if they are receptive to the warning and change their
+be given another chance, if they are receptive to the warning and change their
-   behavior.
+behavior.
 5. If the community member is unreceptive or unreasonable when warned by a
-   moderator, or the warning goes unheeded, they may be banned for a first or
+moderator, or the warning goes unheeded, they may be banned for a first or
-   second offense. Repeated offenses will result in the community member being
+second offense. Repeated offenses will result in the community member being
-   banned.
+banned.
 
 ## Scope
 

README.rst

@@ -1,93 +1,95 @@
-Introduction
+Introduction
-============
+============
-
+
-.. image :: https://img.shields.io/discord/327254708534116352.svg
+.. image :: https://img.shields.io/discord/327254708534116352.svg
-    :target: https://adafru.it/discord
+    :target: https://adafru.it/discord
-    :alt: Discord
+    :alt: Discord
-
+
-This cookiecutter creates a project structure for an Adafruit CircuitPython library.
+This cookiecutter creates a project structure for a Adafruit CircuitPython
-
+library.
-See this Adafruit Learn Guide for an explanation of creating a CircuitPython library: `Creating and sharing a CircuitPython library <https://learn.adafruit.com/creating-and-sharing-a-circuitpython-library/overview>`_ The section for using cookiecutter is `here <https://learn.adafruit.com/creating-and-sharing-a-circuitpython-library/creating-a-library#cookie-cutter>`_.
+
-
+See this Adafruit Learn Guide for an explanation of creating a CircuitPython library: `Creating and sharing a CircuitPython library <https://learn.adafruit.com/creating-and-sharing-a-circuitpython-library/overview>`_ The section for using cookiecutter is `here <https://learn.adafruit.com/creating-and-sharing-a-circuitpython-library/creating-a-library#cookie-cutter>`_.
-.. note::
+
-
+.. note::
-    The above Learn Guide is directed towards creating a library for the Community Bundle. For libraries meant for the Adafruit Bundle, contact the CircuitPython Helpers (@circuitpython helpers) on Discord or put in a new issue on the Adafruit_CircuitPython_Bundle GitHub repository.
+
-
+    The above Learn Guide is directed towards creating a library for the Community Bundle. For libraries meant for the Adafruit Bundle, contact the CircuitPython Helpers (@circuitpython helpers) on Discord or put in a new issue on the Adafruit_CircuitPython_Bundle GitHub repository.
-Cookiecutter Usage
+
-===================
+Cookiecutter Usage
-
+===================
-.. code-block:: bash
+
-
+.. code-block:: bash
-  # The first time
+
-  pip install cookiecutter@https://github.com/cookiecutter/cookiecutter/archive/2.0.2.zip
+  # The first time
-
+  pip install cookiecutter
-  cookiecutter gh:adafruit/cookiecutter-adafruit-circuitpython
+
-
+  cookiecutter gh:adafruit/cookiecutter-adafruit-circuitpython
-Then, fill in the prompts and accomplish some post generation cleanup:
+
-
+Then, fill in the prompts and accomplish some post generation cleanup:
-Prompts
+
---------
+Prompts
-
+--------
-* ``target_bundle`` - Adafruit bundle or Community library bundle
+
-* ``github_user`` - GitHub user or organization which will host this repo. For example, Adafruit funded libraries should say "adafruit" here.
+* ``target_bundle`` - Adafruit bundle or Community library bundle
-* ``author_name`` - Who you are! Sets the copyright to you.
+* ``github_user`` - GitHub user or organization which will host this repo. For example, Adafruit funded libraries should say "adafruit" here.
-* ``company`` - Used to give Copyright credit to the company funding the library. For example, Adafruit funded libraries should say "Adafruit Industries" here.
+* ``author_name`` - Who you are! Sets the copyright to you.
-* ``library_name`` - Shortest name for the library. Usually a chip name such as LIS3DH.
+* ``company`` - Used to give Copyright credit to the company funding the library. For example, Adafruit funded libraries should say "Adafruit Industries" here.
-* ``library_description`` - Write a sentence describing the purpose of this library (e.g. ``CircuitPython helper library for the DC & Stepper Motor FeatherWing, Shield and Pi Hat kits.``).
+* ``library_name`` - Shortest name for the library. Usually a chip name such as LIS3DH.
-* ``library_keywords`` - Used to populate keywords for PyPi. Enter a string of keywords (e.g ``dht temp humidity``) NOTE: The following are included by default: ``adafruit``, ``blinka``, ``circuitpython``, ``micropython``, and the ``library_name`` you enter.
+* ``library_description`` - Write a sentence describing the purpose of this library (e.g. ``CircuitPython helper library for the DC & Stepper Motor FeatherWing, Shield and Pi Hat kits.``).
-* ``library_prefix`` - Used to prefix the code to the organization creating the library. For example, Adafruit supported libraries should say "adafruit" here. Do not add a - or _.
+* ``library_keywords`` - Used to populate keywords for PyPi. Enter a string of keywords (e.g ``dht temp humidity``) NOTE: The following are included by default: ``adafruit``, ``blinka``, ``circuitpython``, ``micropython``, and the ``library_name`` you enter.
-* ``adafruit_product_id`` -  The product ID for the Adafruit product includes a link to the product in the README. Only applies to Adafruit Bundle.
+* ``library_prefix`` - Used to prefix the code to the organization creating the library. For example, Adafruit supported libraries should say "adafruit" here. Do not add a - or _.
-* ``requires_bus_device`` - Determines whether to add comments about a dependency on `BusDevice <https://github.com/adafruit/Adafruit_CircuitPython_BusDevice>`_.
+* ``adafruit_pid`` -  The product ID for the Adafruit product includes a link to the product in the README. Only applies to Adafruit Bundle.
-  If the library uses BusDevice, enter ``y`` or ``yes`` to include. If the library doesn't use BusDevice, all other entries including empty, will not include BusDevice.
+* ``requires_bus_device`` - Determines whether to add comments about a dependency on `BusDevice <https://github.com/adafruit/Adafruit_CircuitPython_BusDevice>`_.
-* ``requires_register`` - Determines whether to add comments about a dependency on `Register <https://github.com/adafruit/Adafruit_CircuitPython_Register>`_.
+  If the library uses BusDevice, enter ``y`` or ``yes`` to include. If the library doesn't use BusDevice, all other entries including empty, will not include BusDevice.
-  If the library uses Register, enter ``y`` or ``yes`` to include. If the library doesn't use Register, all other entries including empty, will not include Register.
+* ``requires_register`` - Determines whether to add comments about a dependency on `Register <https://github.com/adafruit/Adafruit_CircuitPython_Register>`_.
-* ``other_requirements`` - Adds any other module dependencies for PyPi. Enter a comma separated string of modules
+  If the library uses Register, enter ``y`` or ``yes`` to include. If the library doesn't use Register, all other entries including empty, will not include Register.
-  (e.g. ``adafruit-circuitpython-pca9685, adafruit-circuitpython-motor``). NOTE: ``Adafruit-Blinka`` is always included, so no need to include it here.
+* ``other_requirements`` - Adds any other module dependencies for PyPi. Enter a comma separated string of modules
-* ``pypi_release`` - Will this library be releaased on PyPI? If so, enter ``y`` or ``yes`` to include the setup.py. For Adafruit libraries this defaults to Yes.
+  (e.g. ``adafruit-circuitpython-pca9685, adafruit-circuitpython-motor``). NOTE: ``Adafruit-Blinka`` is always included, so no need to include it here.
-* ``sphinx_docs`` - Should the Sphinx based documentation be included in your repo? If so, enter ``y`` or ``yes`` to include the setup.py. For Adafruit libraries this defaults to Yes.
+* ``pypi_release`` - Will this library be releaased on PyPI? If so, enter ``y`` or ``yes`` to include the setup.py. For Adafruit libraries this defaults to Yes.
-
+* ``sphinx_docs`` - Should the Sphinx based documentation be included in your repo? If so, enter ``y`` or ``yes`` to include the setup.py. For Adafruit libraries this defaults to Yes.
-
+* ``default_branch`` - What is the default branch used in your Githiub repos? Choice of Master or Main. For Adafruit libraries this defaults to Master.
-Post Generation Cleanup
+
-------------------------
+
-
+Post Generation Cleanup
-After generation, make sure to glance over the files to make sure they
+------------------------
-autogenerated as you expect (such as capitalization). There are a few places
+
-with ``.. todo::`` that should also be taken care of. After adding or updating
+After generation, make sure to glance over the files to make sure they
-the information requested, make sure the ``.. todo::`` text is removed. Like this:
+autogenerated as you expect (such as capitalization). There are a few places
-
+with ``.. todo::`` that should also be taken care of. After adding or updating
-.. code::
+the information requested, make sure the ``.. todo::`` text is removed. Like this:
-
+
-    # Before Cleanup
+.. code::
-    .. todo:: Describe what the module does
+
-
+    # Before Cleanup
-.. code::
+    .. todo:: Describe what the module does
-
+
-    # After Cleanup
+.. code::
-    This library talks to the AM4Z-1NG sensor. Typical use is for robot friends.
+
-
+    # After Cleanup
-Windows Users
+    This library talks to the AM4Z-1NG sensor. Typical use is for robot friends.
-==============
+
-
+Windows Users
-Due to the development nature of cookiecutter, there are some limitations when using with Windows.
+==============
-
+
-Cookiecutter Installation
+Due to the development nature of cookiecutter, there are some limitations when using with Windows.
---------------------------
+
-
+Cookiecutter Installation
-The Python enviornment can be tricky sometimes in Windows. Use this documentation page for steps and tips on Windows installation: `Cookiecutter Installation - Windows <https://cookiecutter.readthedocs.io/en/latest/installation.html#windows>`_
+--------------------------
-
+
-
+The Python enviornment can be tricky sometimes in Windows. Use this documentation page for steps and tips on Windows installation: `Cookiecutter Installation - Windows <https://cookiecutter.readthedocs.io/en/latest/installation.html#windows>`_
-<library>.py & /examples/<library>_simpletest.py File Generation
+
-------------------------------------------------------------------
+
-
+<library>.py & /examples/<library>_simpletest.py File Generation
-Cookiecutter was developed for use in \*\nix/OSX enviornments. When implementing prompt based configuration for things like filenames, special characters were used for programmatic detection and formatting.
+------------------------------------------------------------------
-
+
-.. code-block::
+Cookiecutter was developed for use in \*\nix/OSX enviornments. When implementing prompt based configuration for things like filenames, special characters were used for programmatic detection and formatting.
-
+
-    {% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | lower }}_{% endif %}{{ cookiecutter.library_name | lower }}.py
+.. code-block::
-
+
-As such, Windows will block the use of these special characters in filenames. So when cookiecutter pulls the Adafruit CircuitPython template, the <library>.py and /examples/<library>_simpletest.py files are not created. This adds an extra step. Simply copy an existing library's .py files (and structure if  making a "package"), and change the prompted values (e.g. author name, library name, documentation information, etc).
+    {% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | lower }}_{% endif %}{{ cookiecutter.library_name | lower }}.py
-
+
-.. note::
+As such, Windows will block the use of these special characters in filenames. So when cookiecutter pulls the Adafruit CircuitPython template, the <library>.py and /examples/<library>_simpletest.py files are not created. This adds an extra step. Simply copy an existing library's .py files (and structure if  making a "package"), and change the prompted values (e.g. author name, library name, documentation information, etc).
-    The above is from experience with using cookiecutter within a Windows native setup. This may not be applicable when using Windows Subsystem for Linux (WSL) or any *nix-For-Windows utilities.
+
-
+.. note::
-    We are always exploring ways to make things easier, so this workflow may change. Also, ideas and solutions are always welcome!
+    The above is from experience with using cookiecutter within a Windows native setup. This may not be applicable when using Windows Subsystem for Linux (WSL) or any *nix-For-Windows utilities.
+
+    We are always exploring ways to make things easier, so this workflow may change. Also, ideas and solutions are always welcome!

conf.py

@@ -356,5 +356,5 @@ texinfo_documents = [
 #
 # texinfo_no_detailmenu = False
 
-intersphinx_mapping = {'python': ('https://docs.python.org/3', None),
+intersphinx_mapping = {'python': ('https://docs.python.org/3.4', None),
-                       'CircuitPython': ('https://docs.circuitpython.org/en/latest/', None)}
+                       'CircuitPython': ('https://circuitpython.readthedocs.io/en/latest/', None)}

cookiecutter.json

@@ -1,26 +1,22 @@
 {
     "target_bundle": [
         "Adafruit",
-        "Community",
+        "Community"
-        "CircuitPython Org",
-        "test"
     ],
-    "github_user": "{%- if cookiecutter.target_bundle == 'Adafruit' -%} adafruit {%- elif cookiecutter.target_bundle == 'CircuitPython Org' -%} circuitpython {%- endif -%}",
+    "github_user": "{%- if cookiecutter.target_bundle == 'Adafruit' -%} adafruit {%- endif -%}",
     "author_name": null,
-    "company": "{%- if cookiecutter.target_bundle == 'Adafruit' -%} Adafruit Industries {%- elif cookiecutter.target_bundle == 'CircuitPython Org' -%} CircuitPython Organization{%- endif -%}",
+    "company": "{%- if cookiecutter.target_bundle == 'Adafruit' -%} Adafruit Industries {%- endif -%}",
     "library_name": null,
     "library_description": "",
     "library_keywords": "",
     "library_prefix": "{%- if cookiecutter.target_bundle == 'Adafruit' -%} adafruit {%- endif -%}",
-    "adafruit_product_id": "",
+    "adafruit_pid": "",
     "requires_bus_device": "",
     "requires_register": "",
     "other_requirements": "",
-    "pypi_release": "{%- if cookiecutter.target_bundle == 'Adafruit' or cookiecutter.target_bundle == 'CircuitPython Org' -%} yes {%- else -%} no {%- endif -%}",
+    "pypi_release": "{%- if cookiecutter.target_bundle == 'Adafruit' -%} yes {%- else -%} no {%- endif -%}",
-    "sphinx_docs":  "{%- if cookiecutter.target_bundle == 'Adafruit' or cookiecutter.target_bundle == 'CircuitPython Org' -%} yes {%- else -%} no {%- endif -%}",
+    "sphinx_docs":  "{%- if cookiecutter.target_bundle == 'Adafruit' -%} yes {%- else -%} no {%- endif -%}",
+    "default_branch": ["master", "main"],
     "_extensions": ["jinja2.ext.do"],
-    "_copy_without_render": ["*.github/*"],
+    "_copy_without_render": ["*.github/*"]
-    "__dirname": "{% if cookiecutter.target_bundle != 'CircuitPython Org' %}{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }}_CircuitPython{% else %}CircuitPython{% endif %}_{{ cookiecutter.library_name|replace(' ', '_')}}{% else %}CircuitPython_Org_{{ cookiecutter.library_name|replace(' ', '_')}}{% endif %}",
-    "__libname": "{{ cookiecutter.library_name | lower | replace(' ', '_') }}",
-    "__libprefix": "{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | lower | replace(' ', '_') }}_{% endif %}"
 }

hooks/post_gen_project.py

@@ -0,0 +1,24 @@
+# SPDX-FileCopyrightText: 2021 Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
+"""
+Hooks that run before the template is rendered.
+"""
+import pathlib
+import shutil
+import sys
+
+
+base_folder = pathlib.PosixPath().resolve()
+docs_dir = base_folder / "docs"
+sphinx_docs = "{{cookiecutter.sphinx_docs}}"
+
+if sphinx_docs.lower() in ["n", "no"]:
+    """
+        Remove the Docs folder if the user doesn't want docs.
+    """
+    try:
+        shutil.rmtree(docs_dir)
+    except OSError as e:
+        print("Error: %s : %s" % (docs_dir, e.strerror))

hooks/pre_gen_project.py

@@ -0,0 +1,16 @@
+# SPDX-FileCopyrightText: 2021 Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
+"""
+Hooks that run before the template is rendered.
+"""
+
+import sys
+
+github_user = '{{cookiecutter.github_user}}'
+
+if github_user in ["", None]:
+    print("ERROR: github_user is a required field.")
+    # exits with status 1 to indicate failure
+    sys.exit(1)

tests/test_make_cookies.py

@@ -3,7 +3,6 @@
 # SPDX-License-Identifier: MIT
 
 import json
-import os
 import pathlib
 import shutil
 import sys
@@ -11,6 +10,10 @@ import sys
 from cookiecutter.main import cookiecutter
 
 
+# only verified on linux and MacOS
+if not (sys.platform.startswith('linux') or sys.platform.startswith('darwin')):
+    raise RuntimeError('These tests are only verified to run on Linux and MacOS systems.')
+
 working_dir = pathlib.Path()
 output_dir = working_dir / '.cookie_test'
 
@@ -41,7 +44,7 @@ def compare_template_dirs(*, library_name='test', library_prefix=None):
                                          `library_prefix` prompt. Default: None
     """
 
-    cookie_template_path = working_dir / "{{ cookiecutter.__dirname }}"
+    cookie_template_path = working_dir / '{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }}_{% endif %}CircuitPython_{{ cookiecutter.library_name}}'
     if library_prefix:
         generated_folder_name = "{}_CircuitPython_{}".format(library_prefix, library_name)
     else:
@@ -83,9 +86,10 @@ def test_new_cookiecutter_only_required_entries():
 
     test_context = {}
     for key, value in cookie_json.items():
-        if not key.startswith('_'):
+        if value == None:
-            if value == None:
+            test_context[key] = 'test'
-                test_context[key] = 'test'
+        if key.startswith('_'):
+            test_context[key] = value
 
     new_cookie = cookiecutter(
         str(working_dir.resolve()),
@@ -95,7 +99,7 @@ def test_new_cookiecutter_only_required_entries():
         extra_context=test_context
     )
 
-    assert os.listdir(output_dir)[0] == 'Adafruit_CircuitPython_test'
+    assert new_cookie == '{}/Adafruit_CircuitPython_test'.format(output_dir.resolve())
     assert compare_template_dirs(library_prefix="Adafruit")
 
 def test_new_cookiecutter_all_entries():
@@ -111,11 +115,15 @@ def test_new_cookiecutter_all_entries():
     for key, value in cookie_json.items():
         if not key.startswith('_'):
             if key == "target_bundle":
-                test_context[key] = 'Community'
+                test_context[key] = 'community'
-            elif key == "pypi_release":
+            if key == "pypi_release":
                 test_context[key] = 'yes'
+            if key == "default_branch":
+                test_context[key] = 'master'
             else:
                 test_context[key] = 'test'
+        else:
+            test_context[key] = value
 
     new_cookie = cookiecutter(
         str(working_dir.resolve()),
@@ -125,5 +133,5 @@ def test_new_cookiecutter_all_entries():
         extra_context=test_context
     )
 
-    assert os.listdir(output_dir)[0] == 'Test_CircuitPython_test'
+    assert new_cookie == '{}/Test_CircuitPython_test'.format(output_dir.resolve())
     assert compare_template_dirs(library_prefix='Test')

tests_requirements.txt

@@ -2,5 +2,5 @@
 #
 # SPDX-License-Identifier: Unlicense
 
-cookiecutter >= 2.1.0
+cookiecutter
 pytest

{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }}_{% endif %}CircuitPython_{{ cookiecutter.library_name}}/.github/workflows/build.yml

@@ -22,10 +22,10 @@ jobs:
         awk -F '\/' '{ print tolower($2) }' |
         tr '_' '-'
         )
-    - name: Set up Python 3.x
+    - name: Set up Python 3.6
-      uses: actions/setup-python@v2
+      uses: actions/setup-python@v1
       with:
-        python-version: "3.x"
+        python-version: 3.6
     - name: Versions
       run: |
         python3 --version
@@ -42,9 +42,9 @@ jobs:
       # (e.g. - apt-get: gettext, etc; pip: circuitpython-build-tools, requirements.txt; etc.)
       run: |
         source actions-ci/install.sh
-    - name: Pip install Sphinx, pre-commit
+    - name: Pip install pylint, Sphinx, pre-commit
       run: |
-        pip install --force-reinstall Sphinx sphinx-rtd-theme pre-commit
+        pip install --force-reinstall pylint Sphinx sphinx-rtd-theme pre-commit
     - name: Library version
       run: git describe --dirty --always --tags
     - name: Setup problem matchers
@@ -59,7 +59,7 @@ jobs:
       with:
         name: bundles
         path: ${{ github.workspace }}/bundles/
-    - name: Check for docs folder
+    - name: Check For docs folder
       id: need-docs
       run: |
         echo ::set-output name=docs::$( find . -wholename './docs' )

{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }}_{% endif %}CircuitPython_{{ cookiecutter.library_name}}/.github/workflows/release.yml

@@ -24,10 +24,10 @@ jobs:
         awk -F '\/' '{ print tolower($2) }' |
         tr '_' '-'
         )
-    - name: Set up Python 3.x
+    - name: Set up Python 3.6
-      uses: actions/setup-python@v2
+      uses: actions/setup-python@v1
       with:
-        python-version: "3.x"
+        python-version: 3.6
     - name: Versions
       run: |
         python3 --version
@@ -67,7 +67,7 @@ jobs:
         echo ::set-output name=setup-py::$( find . -wholename './setup.py' )
     - name: Set up Python
       if: contains(steps.need-pypi.outputs.setup-py, 'setup.py')
-      uses: actions/setup-python@v2
+      uses: actions/setup-python@v1
       with:
         python-version: '3.x'
     - name: Install dependencies
@@ -81,8 +81,5 @@ jobs:
         TWINE_USERNAME: ${{ secrets.pypi_username }}
         TWINE_PASSWORD: ${{ secrets.pypi_password }}
       run: |
-        for file in $(find -not -path "./.*" -not -path "./docs*" -name "*.py"); do
-            sed -i -e "s/0.0.0-auto.0/${{github.event.release.tag_name}}/" $file;
-        done;
         python setup.py sdist
         twine upload dist/*

{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }}_{% endif %}CircuitPython_{{ cookiecutter.library_name}}/.gitignore

@@ -0,0 +1,18 @@
+# SPDX-FileCopyrightText: 2017 Scott Shawcroft, written for Adafruit Industries
+#
+# SPDX-License-Identifier: Unlicense
+
+*.mpy
+.idea
+__pycache__
+_build
+*.pyc
+.env
+.python-version
+build*/
+bundles
+*.DS_Store
+.eggs
+dist
+**/*.egg-info
+.vscode

{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }}_{% endif %}CircuitPython_{{ cookiecutter.library_name}}/.pre-commit-config.yaml

@@ -0,0 +1,40 @@
+# SPDX-FileCopyrightText: 2020 Diego Elio Pettenò
+#
+# SPDX-License-Identifier: Unlicense
+
+repos:
+-   repo: https://github.com/python/black
+    rev: 20.8b1
+    hooks:
+    - id: black
+-   repo: https://github.com/fsfe/reuse-tool
+    rev: v0.12.1
+    hooks:
+    - id: reuse
+-   repo: https://github.com/pre-commit/pre-commit-hooks
+    rev: v2.3.0
+    hooks:
+    -   id: check-yaml
+    -   id: end-of-file-fixer
+    -   id: trailing-whitespace
+-   repo: https://github.com/pycqa/pylint
+    rev: pylint-2.7.1
+    hooks:
+    -   id: pylint
+        name: pylint (library code)
+        types: [python]
+        exclude: "^(docs/|examples/|tests/|setup.py$)"
+-   repo: local
+    hooks:
+    -   id: pylint_examples
+        name: pylint (examples code)
+        description: Run pylint rules on "examples/*.py" files
+        entry: /usr/bin/env bash -c
+        args: ['([[ ! -d "examples" ]] || for example in $(find . -path "./examples/*.py"); do pylint --disable=missing-docstring,invalid-name $example; done)']
+        language: system
+    -   id: pylint_tests
+        name: pylint (tests code)
+        description: Run pylint rules on "tests/*.py" files
+        entry: /usr/bin/env bash -c
+        args: ['([[ ! -d "tests" ]] || for test in $(find . -path "./tests/*.py"); do pylint --disable=missing-docstring $test; done)']
+        language: system

{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }}_{% endif %}CircuitPython_{{ cookiecutter.library_name}}/.pylintrc

@@ -55,7 +55,7 @@ confidence=
 # no Warning level messages displayed, use"--disable=all --enable=classes
 # --disable=W"
 # disable=import-error,print-statement,parameter-unpacking,unpacking-in-except,old-raise-syntax,backtick,long-suffix,old-ne-operator,old-octal-literal,import-star-module-level,raw-checker-failed,bad-inline-option,locally-disabled,locally-enabled,file-ignored,suppressed-message,useless-suppression,deprecated-pragma,apply-builtin,basestring-builtin,buffer-builtin,cmp-builtin,coerce-builtin,execfile-builtin,file-builtin,long-builtin,raw_input-builtin,reduce-builtin,standarderror-builtin,unicode-builtin,xrange-builtin,coerce-method,delslice-method,getslice-method,setslice-method,no-absolute-import,old-division,dict-iter-method,dict-view-method,next-method-called,metaclass-assignment,indexing-exception,raising-string,reload-builtin,oct-method,hex-method,nonzero-method,cmp-method,input-builtin,round-builtin,intern-builtin,unichr-builtin,map-builtin-not-iterating,zip-builtin-not-iterating,range-builtin-not-iterating,filter-builtin-not-iterating,using-cmp-argument,eq-without-hash,div-method,idiv-method,rdiv-method,exception-message-attribute,invalid-str-codec,sys-max-int,bad-python3-import,deprecated-string-function,deprecated-str-translate-call
-disable=print-statement,parameter-unpacking,unpacking-in-except,old-raise-syntax,backtick,long-suffix,old-ne-operator,old-octal-literal,import-star-module-level,raw-checker-failed,bad-inline-option,locally-disabled,locally-enabled,file-ignored,suppressed-message,useless-suppression,deprecated-pragma,apply-builtin,basestring-builtin,buffer-builtin,cmp-builtin,coerce-builtin,execfile-builtin,file-builtin,long-builtin,raw_input-builtin,reduce-builtin,standarderror-builtin,unicode-builtin,xrange-builtin,coerce-method,delslice-method,getslice-method,setslice-method,no-absolute-import,old-division,dict-iter-method,dict-view-method,next-method-called,metaclass-assignment,indexing-exception,raising-string,reload-builtin,oct-method,hex-method,nonzero-method,cmp-method,input-builtin,round-builtin,intern-builtin,unichr-builtin,map-builtin-not-iterating,zip-builtin-not-iterating,range-builtin-not-iterating,filter-builtin-not-iterating,using-cmp-argument,eq-without-hash,div-method,idiv-method,rdiv-method,exception-message-attribute,invalid-str-codec,sys-max-int,bad-python3-import,deprecated-string-function,deprecated-str-translate-call,import-error,bad-continuation,pointless-string-statement,unspecified-encoding
+disable=print-statement,parameter-unpacking,unpacking-in-except,old-raise-syntax,backtick,long-suffix,old-ne-operator,old-octal-literal,import-star-module-level,raw-checker-failed,bad-inline-option,locally-disabled,locally-enabled,file-ignored,suppressed-message,useless-suppression,deprecated-pragma,apply-builtin,basestring-builtin,buffer-builtin,cmp-builtin,coerce-builtin,execfile-builtin,file-builtin,long-builtin,raw_input-builtin,reduce-builtin,standarderror-builtin,unicode-builtin,xrange-builtin,coerce-method,delslice-method,getslice-method,setslice-method,no-absolute-import,old-division,dict-iter-method,dict-view-method,next-method-called,metaclass-assignment,indexing-exception,raising-string,reload-builtin,oct-method,hex-method,nonzero-method,cmp-method,input-builtin,round-builtin,intern-builtin,unichr-builtin,map-builtin-not-iterating,zip-builtin-not-iterating,range-builtin-not-iterating,filter-builtin-not-iterating,using-cmp-argument,eq-without-hash,div-method,idiv-method,rdiv-method,exception-message-attribute,invalid-str-codec,sys-max-int,bad-python3-import,deprecated-string-function,deprecated-str-translate-call,import-error,bad-continuation,pointless-string-statement
 
 # Enable the message, report, category or checker with the given id(s). You can
 # either give multiple identifier separated by comma (,) or put this option

{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }}_{% endif %}CircuitPython_{{ cookiecutter.library_name}}/CODE_OF_CONDUCT.md

@@ -1,6 +1,6 @@
 <!--
 SPDX-FileCopyrightText: 2014 Coraline Ada Ehmke
-SPDX-FileCopyrightText: 2019-2021 Kattni Rembor for Adafruit Industries
+SPDX-FileCopyrightText: 2019 Kattni Rembor for Adafruit Industries
 
 SPDX-License-Identifier: CC-BY-4.0
 -->
@@ -39,8 +39,6 @@ Examples of unacceptable behavior by participants include:
 * Any spamming, flaming, baiting or other attention-stealing behavior
 * Excessive or unwelcome helping; answering outside the scope of the question
   asked
-* Discussion or promotion of activities or projects that intend or pose a risk of
-  significant harm
 * Trolling, insulting/derogatory comments, and personal or political attacks
 * Promoting or spreading disinformation, lies, or conspiracy theories against
   a person, group, organisation, project, or community
@@ -79,40 +77,35 @@ involving other community members.
 
 You may report in the following ways:
 
-In any situation, you may email <support@adafruit.com>.
+In any situation, you may send an email to <support@adafruit.com>.
 
 On the Adafruit Discord, you may send an open message from any channel
 to all Community Moderators by tagging @community moderators. You may
 also send an open message from any channel, or a direct message to
-any Community Moderator.
+@kattni#1507, @tannewt#4653, @danh#1614, @cater#2442,
+@sommersoft#0222, @Mr. Certainly#0472 or @Andon#8175.
 
 Email and direct message reports will be kept confidential.
 
-In situations on Discord where the issue is particularly offensive, possibly
+In situations on Discord where the issue is particularly egregious, possibly
 illegal, requires immediate action, or violates the Discord terms of service,
-you should also report the message directly to [Discord](https://discord.com/safety).
+you should also report the message directly to Discord.
 
 These are the steps for upholding our community’s standards of conduct.
 
 1. Any member of the community may report any situation that violates the
-   CircuitPython Community Code of Conduct. All reports will be reviewed and
+Adafruit Community Code of Conduct. All reports will be reviewed and
-   investigated.
+investigated.
-2. If the behavior is a severe violation, the community member who
+2. If the behavior is an egregious violation, the community member who
-   committed the violation may be banned immediately, without warning.
+committed the violation may be banned immediately, without warning.
 3. Otherwise, moderators will first respond to such behavior with a warning.
 4. Moderators follow a soft "three strikes" policy - the community member may
-   be given another chance, if they are receptive to the warning and change their
+be given another chance, if they are receptive to the warning and change their
-   behavior.
+behavior.
 5. If the community member is unreceptive or unreasonable when warned by a
-   moderator, or the warning goes unheeded, they may be banned for a first or
+moderator, or the warning goes unheeded, they may be banned for a first or
-   second offense. Repeated offenses will result in the community member being
+second offense. Repeated offenses will result in the community member being
-   banned.
+banned.
-6. Disciplinary actions (warnings, bans, etc) for Code of Conduct violations apply
-   to the platform where the violation occurred. However, depending on the severity
-   of the violation, the disciplinary action may be applied across Adafruit's other
-   community platforms. For example, a severe violation on the Adafruit Discord
-   server may result in a ban on not only the Adafruit Discord server, but also on
-   the Adafruit GitHub organisation, Adafruit Forums, Adafruit Twitter, etc.
 
 ## Scope
 
@@ -130,8 +123,9 @@ accordingly.
 
 ## Attribution
 
-This Code of Conduct is adapted from the [Contributor Covenant](https://www.contributor-covenant.org/),
+This Code of Conduct is adapted from the [Contributor Covenant],
-version 1.4, available on [contributor-covenant.org](https://www.contributor-covenant.org/version/1/4/code-of-conduct.html),
+version 1.4, available at
+<https://www.contributor-covenant.org/version/1/4/code-of-conduct.html>,
 and the [Rust Code of Conduct](https://www.rust-lang.org/en-US/conduct.html).
 
 For other projects adopting the Adafruit Community Code of
@@ -139,3 +133,5 @@ Conduct, please contact the maintainers of those projects for enforcement.
 If you wish to use this code of conduct for your own project, consider
 explicitly mentioning your moderation policy or making a copy with your
 own moderation policy so as to avoid confusion.
+
+[Contributor Covenant]: https://www.contributor-covenant.org

{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }}_{% endif %}CircuitPython_{{ cookiecutter.library_name}}/README.rst

@@ -1,39 +1,25 @@
-{%- if cookiecutter.target_bundle != 'CircuitPython Org' -%}
+{% if cookiecutter.library_prefix -%}
-    {%- if cookiecutter.library_prefix -%}
+    {% set prefix = cookiecutter.library_prefix | capitalize + "_" -%}
-        {%- set repo_name = (cookiecutter.library_prefix | capitalize) -%}
+{% else -%}
-        {%- set repo_name = repo_name + '_CircuitPython_' -%}
+    {% set prefix = '' -%}
-    {%- else -%}
+{% endif -%}
-        {%- set repo_name = 'CircuitPython_' -%}
+{% set repo_name = prefix + "CircuitPython_" + cookiecutter.library_name -%}
-    {%- endif -%}
+{% set full_repo_name = cookiecutter.github_user + "/" + repo_name -%}
-    {%- set repo_name = repo_name + cookiecutter.library_name | replace(" ", "_") -%}
+{%- set pypi_name = cookiecutter.library_name|lower|replace("_", "-") -%}
-{%- else -%}
-    {%- set repo_name = 'CircuitPython_Org_' + cookiecutter.library_name | replace(" ", "_") -%}
-{%- endif -%}
-{%- set full_repo_name = cookiecutter.github_user + "/" + repo_name -%}
-{%- set pypi_name = cookiecutter.library_name|lower|replace("_", "-")|replace(" ", "-") -%}
-{%- if cookiecutter.target_bundle == 'Adafruit' -%}
-    {%- set docs_url = 'https://docs.circuitpython.org/projects/' + cookiecutter.library_name | lower | replace(" ", "-") + '/en/latest/' -%}
-{%- else -%}
-    {%- set docs_url = 'https://circuitpython-' + cookiecutter.library_name | lower | replace(" ", "-") | replace("_", "-") + '.readthedocs.io/' -%}
-{%- endif -%}
 Introduction
 ============
 
 {% if cookiecutter.sphinx_docs | lower in ["yes", "y"] %}
-.. image:: https://readthedocs.org/projects/{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | lower | replace("_", "-")}}-{% endif %}circuitpython-{{ cookiecutter.library_name | lower | replace(" ", "-") | replace("_", "-") }}/badge/?version=latest
+.. image:: https://readthedocs.org/projects/{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | lower | replace("_", "-")}}-{% endif %}circuitpython-{{ cookiecutter.library_name | lower }}/badge/?version=latest
 {%- if cookiecutter.target_bundle == 'Adafruit' %}
-    :target: {{ docs_url }}
+    :target: https://circuitpython.readthedocs.io/projects/{{ cookiecutter.library_name | lower }}/en/latest/
 {%- else %}
-    :target: {{ docs_url }}
+    :target: https://circuitpython-{{ cookiecutter.library_name | lower }}.readthedocs.io/
 {%- endif %}
     :alt: Documentation Status
 {% endif %}
 
-{% if cookiecutter.target_bundle == 'Adafruit' -%}
-.. image:: https://github.com/adafruit/Adafruit_CircuitPython_Bundle/blob/main/badges/adafruit_discord.svg
-{%- else %}
 .. image:: https://img.shields.io/discord/327254708534116352.svg
-{%- endif %}
     :target: https://adafru.it/discord
     :alt: Discord
 
@@ -76,10 +62,12 @@ or individual libraries can be installed using
 .. todo:: Describe the Adafruit product this library works with. For PCBs, you can also add the
 image from the assets folder in the PCB's GitHub repo.
 
-`Purchase one from the Adafruit shop <http://www.adafruit.com/products/{{cookiecutter.adafruit_product_id}}>`_
+`Purchase one from the Adafruit shop <http://www.adafruit.com/products/{{cookiecutter.adafruit_pid}}>`_
+
+
 {% endif -%}
 
-{%- if cookiecutter.pypi_release in  ["y", "yes"] %}
+{%- if cookiecutter.pypi_release in  ["y", "yes"] -%}
 
 Installing from PyPI
 =====================
@@ -89,18 +77,18 @@ Installing from PyPI
 .. todo:: Remove the above note if PyPI version is/will be available at time of release.
 
 On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally `from
-PyPI <https://pypi.org/project/{%- if cookiecutter.library_prefix -%}{{ cookiecutter.library_prefix }}-{%- endif -%}circuitpython-{{ pypi_name }}/>`_.
+PyPI <https://pypi.org/project/adafruit-circuitpython-{{ cookiecutter.library_name|lower }}/>`_.
 To install for current user:
 
 .. code-block:: shell
 
-    pip3 install {% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix }}-{% endif %}circuitpython-{{ pypi_name }}
+    pip3 install adafruit-circuitpython-{{ pypi_name }}
 
 To install system-wide (this may be required in some cases):
 
 .. code-block:: shell
 
-    sudo pip3 install {% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix }}-{% endif %}circuitpython-{{ pypi_name }}
+    sudo pip3 install adafruit-circuitpython-{{ pypi_name }}
 
 To install in a virtual environment in your current project:
 
@@ -109,49 +97,25 @@ To install in a virtual environment in your current project:
     mkdir project-name && cd project-name
     python3 -m venv .env
     source .env/bin/activate
-    pip3 install {% if cookiecutter.library_prefix -%}{{ cookiecutter.library_prefix }}-{% endif -%}circuitpython-{{ pypi_name }}
+    pip3 install adafruit-circuitpython-{{ pypi_name }}
 
 {% endif %}
 
-Installing to a Connected CircuitPython Device with Circup
-==========================================================
-
-Make sure that you have ``circup`` installed in your Python environment.
-Install it with the following command if necessary:
-
-.. code-block:: shell
-
-    pip3 install circup
-
-With ``circup`` installed and your CircuitPython device connected use the
-following command to install:
-
-.. code-block:: shell
-
-    circup install {{ cookiecutter.library_name | lower | replace(" ", "-") }}
-
-Or the following command to update an existing version:
-
-.. code-block:: shell
-
-    circup update
-
 Usage Example
 =============
 
 .. todo:: Add a quick, simple example. It and other examples should live in the
 examples folder and be included in docs/examples.rst.
 
-Documentation
-=============
-API documentation for this library can be found on `Read the Docs <{{ docs_url }}>`_.
-
-For information on building library documentation, please check out
-`this guide <https://learn.adafruit.com/creating-and-sharing-a-circuitpython-library/sharing-our-docs-on-readthedocs#sphinx-5-1>`_.
-
 Contributing
 ============
 
 Contributions are welcome! Please read our `Code of Conduct
-<https://github.com/{{ full_repo_name }}/blob/HEAD/CODE_OF_CONDUCT.md>`_
+<https://github.com/{{ full_repo_name }}/blob/{{cookiecutter.default_branch}}/CODE_OF_CONDUCT.md>`_
 before contributing to help this project stay welcoming.
+
+Documentation
+=============
+
+For information on building library documentation, please check out
+`this guide <https://learn.adafruit.com/creating-and-sharing-a-circuitpython-library/sharing-our-docs-on-readthedocs#sphinx-5-1>`_.

{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }}_{% endif %}CircuitPython_{{ cookiecutter.library_name}}/docs/api.rst

@@ -4,5 +4,5 @@
 .. If your library file(s) are nested in a directory (e.g. /adafruit_foo/foo.py)
 .. use this format as the module name: "adafruit_foo.foo"
 
-.. automodule:: {% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | lower }}_{% endif %}{{ cookiecutter.library_name | lower | replace(" ", "_") }}
+.. automodule:: {% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | lower }}_{% endif %}{{ cookiecutter.library_name | lower }}
     :members:

{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }}_{% endif %}CircuitPython_{{ cookiecutter.library_name}}/docs/conf.py

@@ -29,14 +29,14 @@ extensions = [
 
 
 intersphinx_mapping = {
-    "python": ("https://docs.python.org/3", None),
+    "python": ("https://docs.python.org/3.4", None),
     {%- if cookiecutter.requires_bus_device in ["y", "yes"] -%}
-    "BusDevice": ("https://docs.circuitpython.org/projects/busdevice/en/latest/", None),
+    "BusDevice": ("https://circuitpython.readthedocs.io/projects/busdevice/en/latest/", None),
     {% endif %}
     {%- if cookiecutter.requires_register in ["y", "yes"] -%}
-    "Register": ("https://docs.circuitpython.org/projects/register/en/latest/", None),
+    "Register": ("https://circuitpython.readthedocs.io/projects/register/en/latest/", None),
     {%- endif %}
-    "CircuitPython": ("https://docs.circuitpython.org/en/latest/", None),
+    "CircuitPython": ("https://circuitpython.readthedocs.io/en/latest/", None),
 }
 
 # Show the docstring from both the class and its __init__() method.
@@ -51,7 +51,7 @@ source_suffix = ".rst"
 master_doc = "index"
 
 # General information about the project.
-project = "{% if cookiecutter.target_bundle != 'CircuitPython Org' %}{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }} {% endif %}{% endif %}CircuitPython {{ cookiecutter.library_name }} Library"
+project = "{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }} {% endif %} CircuitPython {{ cookiecutter.library_name }} Library"
 copyright = "{% now 'utc', '%Y' %} {{ cookiecutter.author_name }}"
 author = "{{ cookiecutter.author_name }}"
 
@@ -69,7 +69,7 @@ release = "1.0"
 #
 # This is also used if you do content translation via gettext catalogs.
 # Usually you set "language" from the command line for these cases.
-language = "en"
+language = None
 
 # List of patterns, relative to source directory, that match files and
 # directories to ignore when looking for source files.
@@ -133,7 +133,7 @@ html_static_path = ["_static"]
 html_favicon = "_static/favicon.ico"
 
 # Output file base name for HTML help builder.
-htmlhelp_basename = "{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }}_{% endif %}CircuitPython_{{ cookiecutter.library_name | capitalize | replace(' ', '_')}}_Librarydoc"
+htmlhelp_basename = "{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }}_{% endif %}CircuitPython_{{ cookiecutter.library_name | capitalize }}Librarydoc"
 
 # -- Options for LaTeX output ---------------------------------------------
 
@@ -154,7 +154,7 @@ latex_elements = {
 latex_documents = [
     (
         master_doc,
-        "{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }}_{% endif %}CircuitPython_{{ cookiecutter.library_name | replace(' ', '_')}}_Library.tex",
+        "{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }}_{% endif %}CircuitPython_{{ cookiecutter.library_name }}Library.tex",
         "{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }} {% endif %}CircuitPython {{ cookiecutter.library_name }} Library Documentation",
         author,
         "manual",
@@ -168,7 +168,7 @@ latex_documents = [
 man_pages = [
     (
         master_doc,
-        "{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }}_{% endif %}CircuitPython_{{ cookiecutter.library_name | replace(' ', '_')}}_Library",
+        "{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }}_{% endif %}CircuitPython_{{ cookiecutter.library_name }}Library",
         "{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }} {% endif %}CircuitPython {{ cookiecutter.library_name }} Library Documentation",
         [author],
         1,
@@ -183,10 +183,10 @@ man_pages = [
 texinfo_documents = [
     (
         master_doc,
-        "{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }}_{% endif %}CircuitPython_{{ cookiecutter.library_name | replace(' ', '_') }}_Library",
+        "{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }}_{% endif %}CircuitPython_{{ cookiecutter.library_name }}Library",
         "{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }} {% endif %}CircuitPython {{ cookiecutter.library_name }} Library Documentation",
         author,
-        "{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }}_{% endif %}CircuitPython_{{ cookiecutter.library_name | replace(' ', '_')}}_Library",
+        "{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }}_{% endif %}CircuitPython_{{ cookiecutter.library_name }}Library",
         "One line description of project.",
         "Miscellaneous",
     ),

{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }}_{% endif %}CircuitPython_{{ cookiecutter.library_name}}/docs/examples.rst

@@ -3,6 +3,6 @@ Simple test
 
 Ensure your device works with this simple test.
 
-.. literalinclude:: ../examples/{{ cookiecutter.library_name | lower | replace(" ", "_") }}_simpletest.py
+.. literalinclude:: ../examples/{{ cookiecutter.library_name | lower }}_simpletest.py
-    :caption: examples/{{ cookiecutter.library_name | lower | replace(" ", "_") }}_simpletest.py
+    :caption: examples/{{ cookiecutter.library_name | lower }}_simpletest.py
     :linenos:

{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }}_{% endif %}CircuitPython_{{ cookiecutter.library_name}}/docs/index.rst

@@ -36,9 +36,8 @@ Table of Contents
 .. toctree::
     :caption: Other Links
 
-    Download from GitHub <https://github.com/{{ cookiecutter.github_user }}/{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize}}_{% endif %}CircuitPython_{{ cookiecutter.library_name | replace(" ", "_") }}/releases/latest>
+    Download <https://github.com/{{ cookiecutter.github_user }}/{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize}}_{% endif %}CircuitPython_{{ cookiecutter.library_name }}/releases/latest>
-    Download Library Bundle <https://circuitpython.org/libraries>
+    CircuitPython Reference Documentation <https://circuitpython.readthedocs.io>
-    CircuitPython Reference Documentation <https://docs.circuitpython.org>
     CircuitPython Support Forum <https://forums.adafruit.com/viewforum.php?f=60>
     Discord Chat <https://adafru.it/discord>
     Adafruit Learning System <https://learn.adafruit.com>

{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }}_{% endif %}CircuitPython_{{ cookiecutter.library_name}}/{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | lower }}_{% endif %}{{ cookiecutter.library_name | lower }}.py

@@ -3,7 +3,7 @@
 #
 # SPDX-License-Identifier: MIT
 """
-`{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | lower | replace(" ", "_") }}_{% endif %}{{ cookiecutter.library_name | lower | replace(" ", "_") }}`
+`{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | lower }}_{% endif %}{{ cookiecutter.library_name | lower }}`
 ================================================================================
 
 {% if cookiecutter.library_description != "" %}
@@ -25,7 +25,7 @@ Implementation Notes
 **Software and Dependencies:**
 
 * Adafruit CircuitPython firmware for the supported boards:
-  https://circuitpython.org/downloads
+  https://github.com/adafruit/circuitpython/releases
 
 .. todo:: Uncomment or remove the Bus Device and/or the Register library dependencies
   based on the library's use of either.
@@ -36,18 +36,5 @@ Implementation Notes
 
 # imports
 
-{% if cookiecutter.target_bundle != 'CircuitPython Org' -%}
-    {%- if cookiecutter.library_prefix -%}
-        {%- set repo_name = (cookiecutter.library_prefix | capitalize) -%}
-        {%- set repo_name = repo_name + '_CircuitPython_' -%}
-        {%- set repo_name = repo_name + cookiecutter.library_name | replace(" ", "_") -%}
-    {%- else -%}
-        {%- set repo_name = 'CircuitPython_' -%}
-        {%- set repo_name = repo_name + cookiecutter.library_name | replace(" ", "_") -%}
-    {%- endif -%}
-{% else -%}
-    {%- set repo_name = 'CircuitPython_Org_' + cookiecutter.library_name | replace(" ", "_") -%}
-{% endif -%}
-
 __version__ = "0.0.0-auto.0"
-__repo__ = "https://github.com/{{ cookiecutter.github_user }}/{{ repo_name }}.git"
+__repo__ = "https://github.com/{{ cookiecutter.github_user }}/{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize}}_{% endif %}CircuitPython_{{ cookiecutter.library_name }}.git"

{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }}_{% endif %}CircuitPython_{{ cookiecutter.library_name}}/{% if cookiecutter.pypi_release in ['y', 'yes'] %}setup.py{% endif %}

@@ -17,24 +17,19 @@
 {%- endif -%}
 {# put keywords into an iterable list, based on word wrapping #}
 {%- set kw_list = namespace(kw_list=[], default=["adafruit", "blinka", "circuitpython", "micropython"]) -%}
-{%- do kw_list.default.append(cookiecutter.library_name|lower|replace(" ", "-")) -%}
+{%- do kw_list.default.append(cookiecutter.library_name|lower) -%}
 {%- do kw_list.default.extend(cookiecutter.library_keywords.split(" ")) -%}
 {%- set wrapped = kw_list.default|unique|join(" ")|wordwrap(break_long_words=False) -%}
 {%- do kw_list.kw_list.extend(wrapped.split("\n")) -%}
 {# create repo and pypi names #}
-{%- if cookiecutter.target_bundle != 'CircuitPython Org' -%}
+{%- if cookiecutter.library_prefix -%}
-    {%- if cookiecutter.library_prefix -%}
+    {%- set repo_name = (cookiecutter.library_prefix | capitalize) -%}
-        {%- set repo_name = (cookiecutter.library_prefix | capitalize) -%}
+    {%- set repo_name = repo_name + '_CircuitPython_' -%}
-        {%- set repo_name = repo_name + '_CircuitPython_' -%}
+    {%- set repo_name = repo_name + cookiecutter.library_name -%}
-        {%- set repo_name = repo_name + cookiecutter.library_name | replace(" ", "_") -%}
-    {%- else -%}
-        {%- set repo_name = 'CircuitPython_' -%}
-        {%- set repo_name = repo_name + cookiecutter.library_name | replace(" ", "_") -%}
-    {%- endif -%}
 {%- else -%}
-    {%- set repo_name = 'CircuitPython_Org_' + cookiecutter.library_name | replace(" ", "_") -%}
+    {%- set repo_name = 'CircuitPython_' + cookiecutter.library_name -%}
 {%- endif -%}
-{%- set pypi_name = repo_name|lower|replace("_", "-")|replace(" ", "-")|replace("circuitpython-org-", "circuitpython-") -%}
+{%- set pypi_name = repo_name|lower|replace("_", "-") -%}
 """A setuptools based setup module.
 
 See:
@@ -55,13 +50,10 @@ with open(path.join(here, "README.rst"), encoding="utf-8") as f:
     long_description = f.read()
 
 setup(
-    # {{ cookiecutter.target_bundle }} Bundle Information
+    {% if cookiecutter.target_bundle == 'Adafruit' -%}
+    # Adafruit Bundle Information
     name="{{ pypi_name }}",
-    use_scm_version={
+    use_scm_version=True,
-        # This is needed for the PyPI version munging in the Github Actions release.yml
-        "git_describe_command": "git describe --tags --long",
-        "local_scheme": "no-local-version",
-    },
     setup_requires=["setuptools_scm"],
     description="{{ cookiecutter.library_description }}",
     long_description=long_description,
@@ -69,12 +61,21 @@ setup(
     # The project's main homepage.
     url="https://github.com/{{ cookiecutter.github_user }}/{{ repo_name }}.git",
     # Author details
-    {% if cookiecutter.target_bundle == 'Adafruit' -%}
     author="Adafruit Industries",
     author_email="circuitpython@adafruit.com",
     {%- else -%}
+    # Community Bundle Information
+    name="{{ pypi_name }}",
+    use_scm_version=True,
+    setup_requires=["setuptools_scm"],
+    description="{{ cookiecutter.library_description }}",
+    long_description=long_description,
+    long_description_content_type="text/x-rst",
+    # The project's main homepage.
+    url="https://github.com/{{ cookiecutter.github_user }}/{{ repo_name }}.git",
+    # Author details
     author="{{ cookiecutter.author_name }}",
-    author_email="",  # TODO: Add your email here
+    author_email="",
     {%- endif %}
     install_requires=[
         "{{ req_list.items|sort|unique|join('",\n"')|indent(width=8) }}",
@@ -89,13 +90,14 @@ setup(
         "Topic :: System :: Hardware",
         "License :: OSI Approved :: MIT License",
         "Programming Language :: Python :: 3",
+        "Programming Language :: Python :: 3.4",
+        "Programming Language :: Python :: 3.5",
     ],
     # What does your project relate to?
     keywords="{{ kw_list.kw_list|sort|unique|join(' "\n"')|indent(width=13) }}",
-
     # You can just specify the packages manually here if your project is
     # simple. Or you can use find_packages().
     # TODO: IF LIBRARY FILES ARE A PACKAGE FOLDER,
     #       CHANGE `py_modules=['...']` TO `packages=['...']`
-    py_modules=["{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | lower | replace(" ", "_") }}_{% endif %}{{ cookiecutter.library_name | lower | replace(" ", "_") }}"],
+    py_modules=["{%- if cookiecutter.library_prefix != '' -%}{{ cookiecutter.library_prefix|lower }}_{%- endif -%}{{- cookiecutter.library_name|lower -}}"],
 )

{% if cookiecutter.library_prefix %}{{ cookiecutter.library_prefix | capitalize }}_{% endif %}CircuitPython_{{ cookiecutter.library_name}}/{% if cookiecutter.sphinx_docs in ['y', 'yes'] %}.readthedocs.yml{% endif %}

@@ -0,0 +1,7 @@
+# SPDX-FileCopyrightText: 2017 Scott Shawcroft, written for Adafruit Industries
+#
+# SPDX-License-Identifier: Unlicense
+
+python:
+    version: 3
+requirements_file: requirements.txt

{{ cookiecutter.__dirname }}/.github/PULL_REQUEST_TEMPLATE/adafruit_circuitpython_pr.md

@@ -1,13 +0,0 @@
-# SPDX-FileCopyrightText: 2021 Adafruit Industries
-#
-# SPDX-License-Identifier: MIT
-
-Thank you for contributing! Before you submit a pull request, please read the following.
-
-Make sure any changes you're submitting are in line with the CircuitPython Design Guide, available here: https://docs.circuitpython.org/en/latest/docs/design_guide.html
-
-If your changes are to documentation, please verify that the documentation builds locally by following the steps found here: https://adafru.it/build-docs
-
-Before submitting the pull request, make sure you've run Pylint and Black locally on your code. You can do this manually or using pre-commit. Instructions are available here: https://adafru.it/check-your-code
-
-Please remove all of this text before submitting. Include an explanation or list of changes included in your PR, as well as, if applicable, a link to any related issues.

{{ cookiecutter.__dirname }}/.gitignore

@@ -1,47 +0,0 @@
-# SPDX-FileCopyrightText: 2022 Kattni Rembor, written for Adafruit Industries
-#
-# SPDX-License-Identifier: MIT
-
-# Do not include files and directories created by your personal work environment, such as the IDE
-# you use, except for those already listed here. Pull requests including changes to this file will
-# not be accepted.
-
-# This .gitignore file contains rules for files generated by working with CircuitPython libraries,
-# including building Sphinx, testing with pip, and creating a virual environment, as well as the
-# MacOS and IDE-specific files generated by using MacOS in general, or the PyCharm or VSCode IDEs.
-
-# If you find that there are files being generated on your machine that should not be included in
-# your git commit, you should create a .gitignore_global file on your computer to include the
-# files created by your personal setup. To do so, follow the two steps below.
-
-# First, create a file called .gitignore_global somewhere convenient for you, and add rules for
-# the files you want to exclude from git commits.
-
-# Second, configure Git to use the exclude file for all Git repositories by running the
-# following via commandline, replacing "path/to/your/" with the actual path to your newly created
-# .gitignore_global file:
-# git config --global core.excludesfile path/to/your/.gitignore_global
-
-# CircuitPython-specific files
-*.mpy
-
-# Python-specific files
-__pycache__
-*.pyc
-
-# Sphinx build-specific files
-_build
-
-# This file results from running `pip -e install .` in a local repository
-*.egg-info
-
-# Virtual environment-specific files
-.env
-
-# MacOS-specific files
-*.DS_Store
-
-# IDE-specific files
-.idea
-.vscode
-*~

{{ cookiecutter.__dirname }}/.pre-commit-config.yaml

@@ -1,42 +0,0 @@
-# SPDX-FileCopyrightText: 2020 Diego Elio Pettenò
-#
-# SPDX-License-Identifier: Unlicense
-
-repos:
-  - repo: https://github.com/python/black
-    rev: 22.3.0
-    hooks:
-      - id: black
-  - repo: https://github.com/fsfe/reuse-tool
-    rev: v0.14.0
-    hooks:
-      - id: reuse
-  - repo: https://github.com/pre-commit/pre-commit-hooks
-    rev: v4.2.0
-    hooks:
-      - id: check-yaml
-      - id: end-of-file-fixer
-      - id: trailing-whitespace
-  - repo: https://github.com/pycqa/pylint
-    rev: v2.11.1
-    hooks:
-      - id: pylint
-        name: pylint (library code)
-        types: [python]
-        args:
-          - --disable=consider-using-f-string,duplicate-code
-        exclude: "^(docs/|examples/|tests/|setup.py$)"
-      - id: pylint
-        name: pylint (example code)
-        description: Run pylint rules on "examples/*.py" files
-        types: [python]
-        files: "^examples/"
-        args:
-          - --disable=missing-docstring,invalid-name,consider-using-f-string,duplicate-code
-      - id: pylint
-        name: pylint (test code)
-        description: Run pylint rules on "tests/*.py" files
-        types: [python]
-        files: "^tests/"
-        args:
-          - --disable=missing-docstring,consider-using-f-string,duplicate-code

{{ cookiecutter.__dirname }}/docs/{% if cookiecutter.sphinx_docs in ['y', 'yes'] %}requirements.txt{% endif %}

@@ -1,5 +0,0 @@
-# SPDX-FileCopyrightText: 2021 Kattni Rembor for Adafruit Industries
-#
-# SPDX-License-Identifier: Unlicense
-
-sphinx>=4.0.0

{{ cookiecutter.__dirname }}/{% if cookiecutter.sphinx_docs in ['y', 'yes'] %}.readthedocs.yaml{% endif %}

@@ -1,19 +0,0 @@
-# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
-#
-# SPDX-License-Identifier: Unlicense
-
-# Read the Docs configuration file
-# See https://docs.readthedocs.io/en/stable/config-file/v2.html for details
-
-# Required
-version: 2
-
-build:
-  os: ubuntu-20.04
-  tools:
-    python: "3"
-
-python:
-  install:
-    - requirements: docs/requirements.txt
-    - requirements: requirements.txt

{{ cookiecutter.__dirname }}/{% if cookiecutter.target_bundle == 'Community' %}CODE_OF_CONDUCT.md{% endif %}

@@ -1,138 +0,0 @@
-<!--
-SPDX-FileCopyrightText: 2014 Coraline Ada Ehmke
-SPDX-FileCopyrightText: 2019-2021 Kattni Rembor
-
-SPDX-License-Identifier: CC-BY-4.0
--->
-# CircuitPython Community Code of Conduct
-
-## Our Pledge
-
-In the interest of fostering an open and welcoming environment, we as
-contributors and leaders pledge to making participation in our project and
-our community a harassment-free experience for everyone, regardless of age, body
-size, disability, ethnicity, gender identity and expression, level or type of
-experience, education, socio-economic status, nationality, personal appearance,
-race, religion, or sexual identity and orientation.
-
-## Our Standards
-
-We are committed to providing a friendly, safe and welcoming environment for
-all.
-
-Examples of behavior that contributes to creating a positive environment
-include:
-
-* Be kind and courteous to others
-* Using welcoming and inclusive language
-* Being respectful of differing viewpoints and experiences
-* Collaborating with other community members
-* Gracefully accepting constructive criticism
-* Focusing on what is best for the community
-* Showing empathy towards other community members
-
-Examples of unacceptable behavior by participants include:
-
-* The use of sexualized language or imagery and sexual attention or advances
-* The use of inappropriate images, including in a community member's avatar
-* The use of inappropriate language, including in a community member's nickname
-* Any spamming, flaming, baiting or other attention-stealing behavior
-* Excessive or unwelcome helping; answering outside the scope of the question
-  asked
-* Discussion or promotion of activities or projects that intend or pose a risk of
-  significant harm
-* Trolling, insulting/derogatory comments, and personal or political attacks
-* Promoting or spreading disinformation, lies, or conspiracy theories against
-  a person, group, organisation, project, or community
-* Public or private harassment
-* Publishing others' private information, such as a physical or electronic
-  address, without explicit permission
-* Other conduct which could reasonably be considered inappropriate
-
-The goal of the standards and moderation guidelines outlined here is to build
-and maintain a respectful community. We ask that you don’t just aim to be
-"technically unimpeachable", but rather try to be your best self.
-
-We value many things beyond technical expertise, including collaboration and
-supporting others within our community. Providing a positive experience for
-other community members can have a much more significant impact than simply
-providing the correct answer.
-
-## Our Responsibilities
-
-Project leaders are responsible for clarifying the standards of acceptable
-behavior and are expected to take appropriate and fair corrective action in
-response to any instances of unacceptable behavior.
-
-Project leaders have the right and responsibility to remove, edit, or
-reject messages, comments, commits, code, issues, and other contributions
-that are not aligned to this Code of Conduct, or to ban temporarily or
-permanently any community member for other behaviors that they deem
-inappropriate, threatening, offensive, or harmful.
-
-## Moderation
-
-Instances of behaviors that violate the CircuitPython Community Code of Conduct
-may be reported by any member of the community. Community members are
-encouraged to report these situations, including situations they witness
-involving other community members.
-
-You may report in the following ways:
-
-In any situation, you may email the project maintainer.
-
-Email reports will be kept confidential.
-
-In situations on GitHub where the issue is particularly offensive, possibly
-illegal, requires immediate action, or violates the GitHub terms of service,
-you should also report the message directly to GitHub via the comment, or via
-[GitHub Support](https://support.github.com/contact/report-abuse?category=report-abuse&report=other&report_type=unspecified).
-
-These are the steps for upholding our community’s standards of conduct.
-
-1. Any member of the community may report any situation that violates the
-   CircuitPython Community Code of Conduct. All reports will be reviewed and
-   investigated.
-2. If the behavior is a severe violation, the community member who
-   committed the violation may be banned immediately, without warning.
-3. Otherwise, moderators will first respond to such behavior with a warning.
-4. Moderators follow a soft "three strikes" policy - the community member may
-   be given another chance, if they are receptive to the warning and change their
-   behavior.
-5. If the community member is unreceptive or unreasonable when warned by a
-   moderator, or the warning goes unheeded, they may be banned for a first or
-   second offense. Repeated offenses will result in the community member being
-   banned.
-6. Disciplinary actions (warnings, bans, etc) for Code of Conduct violations apply
-   to the platform where the violation occurred. However, depending on the severity
-   of the violation, the disciplinary action may be applied across CircuitPython's
-   other community platforms. For example, a severe violation in one Community forum
-   may result in a ban on not only the CircuitPython GitHub organisation,
-   but also on the CircuitPython Twitter, live stream text chats, etc.
-
-## Scope
-
-This Code of Conduct and the enforcement policies listed above apply to all
-CircuitPython Community venues. This includes but is not limited to any community
-spaces (both public and private), and CircuitPython repositories. Examples of
-CircuitPython Community spaces include but are not limited to meet-ups, issue
-threads on GitHub, text chats during a live stream, or interaction at a conference.
-
-This Code of Conduct applies both within project spaces and in public spaces
-when an individual is representing the project or its community. As a community
-member, you are representing our community, and are expected to behave
-accordingly.
-
-## Attribution
-
-This Code of Conduct is adapted from the
-[Adafruit Community Code of Conduct](https://github.com/adafruit/Adafruit_Community_Code_of_Conduct),
-which is adapted from the [Contributor Covenant](https://www.contributor-covenant.org/),
-version 1.4, available on [contributor-covenant.org](https://www.contributor-covenant.org/version/1/4/code-of-conduct.html),
-and the [Rust Code of Conduct](https://www.rust-lang.org/en-US/conduct.html).
-
-For other projects adopting the CircuitPython Community Code of
-Conduct, please contact the maintainers of those projects for enforcement.
-If you wish to use this code of conduct for your own project, consider
-explicitly mentioning your moderation policy or making a copy with your
-own moderation policy so as to avoid confusion.