Currently, if asyncio.wait_for() timeout expires, it cancels
inner future and then always raises TimeoutError. In case
those future is task, it can handle cancelation mannually,
and those process can lead to some other exception. Current
implementation silently loses thoses exception.
To resolve this, wait_for will check was the cancelation
successfull or not. In case there was exception, wait_for
will reraise it.
Co-authored-by: Roman Skurikhin <roman.skurikhin@cruxlab.com>
Motivation for this PR (comment from @vstinner in bpo issue):
```
Warning seen o AMD64 Ubuntu Shared 3.x buildbot:
https://buildbot.python.org/all/#/builders/141/builds/2593
test_devnull_output (test.test_a=syncio.test_subprocess.SubprocessThreadedWatcherTests) ...
Warning -- threading_cleanup() failed to cleanup 1 threads (count: 1, dangling: 2)
```
The following implementation details for the new method are TBD:
1) Public vs private
2) Inclusion in `close()`
3) Name
4) Coroutine vs subroutine method
5) *timeout* parameter
If it's a private method, 3, 4, and 5 are significantly less important.
I started with the most minimal implementation that fixes the dangling threads without modifying the regression tests, which I think is particularly important. I typically try to avoid directly modifying existing tests as much as possible unless it's necessary to do so. However, I am open to changing any part of this.
https://bugs.python.org/issue38356
If waitpid() is called elsewhere, waitpid() call fails with
ChildProcessError: use return code 255 in this case, and log a
warning. It ensure that the pidfd file descriptor is closed if this
error occurs.
Capturing exceptions into names can lead to reference cycles though the __traceback__ attribute of the exceptions in some obscure cases that have been reported previously and fixed individually. As these variables are not used anyway, we can remove the binding to reduce the chances of creating reference cycles.
See for example GH-13135
* This just copies the docs from `StreamWriter` and `StreamReader`.
* Add docstring for asyncio functions.
https://bugs.python.org/issue36889
Automerge-Triggered-By: @asvetlov
This PR deprecate explicit loop parameters in all public asyncio APIs
This issues is split to be easier to review.
fourth step: queue.py
https://bugs.python.org/issue36373
This PR deprecate explicit loop parameters in all public asyncio APIs
This issues is split to be easier to review.
Third step: locks.py
https://bugs.python.org/issue36373
This PR deprecate explicit loop parameters in all public asyncio APIs
This issues is split to be easier to review.
Second step: streams.py
https://bugs.python.org/issue36373
Add BaseEventLoop.wait_executor_on_close attribute: true by default.
loop.close() now waits for the default executor to finish by default.
Set loop.wait_executor_on_close attribute to False to not wait for
the executor.
This will address the common mistake many asyncio users make:
an "except Exception" clause breaking Tasks cancellation.
In addition to this change, we stop inheriting asyncio.TimeoutError
and asyncio.InvalidStateError from their concurrent.futures.*
counterparts. There's no point for these exceptions to share the
inheritance chain.
In 3.9 we'll focus on implementing supervisors and cancel scopes,
which should allow better handling of all exceptions, including
SystemExit and KeyboardInterrupt
This PR proposes a solution to [bpo-35545](https://bugs.python.org/issue35545) by adding an optional `flowinfo` and `scopeid` to `asyncio.base_events._ipaddr_info` to carry the full address information into `_ipaddr_info` and avoid discarding IPv6 specific information.
Changelog entry & regression tests to come.
https://bugs.python.org/issue35545
When the future returned by shield is cancelled, its completion callback of the
inner future is not removed. This makes the callback list of inner inner future
grow each time a shield is created and cancelled.
This change unregisters the callback from the inner future when the outer
future is cancelled.
https://bugs.python.org/issue35125
*Moved from python/asyncio#493.*
This PR fixes issue python/asyncio#480, as explained in [this comment](https://github.com/python/asyncio/issues/480#issuecomment-278703828).
The `_SelectorDatagramTransport.sendto` method has to be modified ~~so `_sock.sendto` is used in all cases (because it is tricky to reliably tell if the socket is connected or not). Could that be an issue for connected sockets?~~ *EDIT* ... so `_sock.send` is used only if `_sock` is connected.
It also protects `socket.getsockname` against `OSError` in `_SelectorTransport`. This might happen on Windows if the socket is not connected (e.g. for UDP broadcasting).
https://bugs.python.org/issue31922
Added two keyword arguments, `delay` and `interleave`, to
`BaseEventLoop.create_connection`. Happy eyeballs is activated if
`delay` is specified.
We now have documentation for the new arguments. `staggered_race()` is in its own module, but not exported to the main asyncio package.
https://bugs.python.org/issue33530
asyncio.ProactorEventLoop now catchs and logs send errors when the
self-pipe is full: BaseProactorEventLoop._write_to_self() now catchs
and logs OSError exceptions, as done by
BaseSelectorEventLoop._write_to_self().
IocpProactor.close() now uses time to decide when to log: wait 1
second before the first log, then log every second. Log also the
number of seconds since close() was called.
* asyncio: __del__() keep reference to warnings.warn
The __del__() methods of asyncio classes now keep a strong reference
to the warnings.warn() to be able to display the ResourceWarning
warning in more cases. Ensure that the function remains available if
instances are destroyed late during Python shutdown (while module
symbols are cleared).
* Rename warn parameter to _warn
"_warn" name is a hint that it's not the regular warnings.warn()
function.
* _wait_for_handle(), _register() and _unregister() methods of
IocpProactor now raise an exception if closed
* Add "closed" to IocpProactor.__repr__()
* Simplify IocpProactor.close()
bpo-32622, bpo-35682: Fix asyncio.ProactorEventLoop.sendfile(): don't
attempt to set the result of an internal future if it's already done.
Fix asyncio _ProactorBasePipeTransport._force_close(): don't set the
result of _empty_waiter if it's already done.
The call to `_untrack_reader` is performed too soon, causing the protocol
to forget about the reader before `connection_lost` can run and feed the
EOF to the reader. See bpo-35065.
The waiting is pretty normal for any asyncio program, logging its time just adds
a noise to logs without any useful information provided.
https://bugs.python.org/issue34849
* Insert the warn in the asyncio.sleep when the loop argument is used
* Insert the warn in the asyncio.wait and asyncio.wait_for when the loop argument is used
* Better format of the code
* Add news file
* change calls for get_event_loop() to calls for get_running_loop()
* Change message to be more clear in News
* Improve the comments in test_tasks
Store a weak reference to stream readerfor breaking strong references
It breaks the strong reference loop between reader and protocol and allows to detect and close the socket if the stream is deleted (garbage collected)
Various asyncio internals expect that the default executor is a
`ThreadPoolExecutor`, so deprecate passing anything else to
`loop.set_default_executor()`.
The cancellation of an overlapped WSARecv() has a race condition
which causes data loss because of the current implementation of
proactor in asyncio.
No longer cancel overlapped WSARecv() in _ProactorReadPipeTransport
to work around the race condition.
Remove the optimized recv_into() implementation to get simple
implementation of pause_reading() using the single _pending_data
attribute.
Move _feed_data_to_bufferred_proto() to protocols.py.
Remove set_protocol() method which became useless.
* Fix AttributeError (not all SSL exceptions have 'errno' attribute)
* Increase default handshake timeout from 10 to 60 seconds
* Make sure start_tls can be cancelled correctly
* Make sure any error in SSLProtocol gets propagated (instead of just being logged)
Future.set_result and Future.set_exception now raise InvalidStateError
if the futures are not pending or running. This mirrors the behavior
of asyncio.Future, and prevents AssertionErrors in asyncio.wrap_future
when set_result is called multiple times.
Currently, asyncio.wait_for(fut), upon reaching the timeout deadline,
cancels the future and returns immediately. This is problematic for
when *fut* is a Task, because it will be left running for an arbitrary
amount of time. This behavior is iself surprising and may lead to
related bugs such as the one described in bpo-33638:
condition = asyncio.Condition()
async with condition:
await asyncio.wait_for(condition.wait(), timeout=0.5)
Currently, instead of raising a TimeoutError, the above code will fail
with `RuntimeError: cannot wait on un-acquired lock`, because
`__aexit__` is reached _before_ `condition.wait()` finishes its
cancellation and re-acquires the condition lock.
To resolve this, make `wait_for` await for the task cancellation.
The tradeoff here is that the `timeout` promise may be broken if the
task decides to handle its cancellation in a slow way. This represents
a behavior change and should probably not be back-patched to 3.6 and
earlier.
Use transport.set_write_buffer_limits() in sendfile tests of
test_asyncio to make sure that the protocol is paused after sending
4 KiB. Previously,
test_sendfile_fallback_close_peer_in_the_middle_of_receiving() failed
on FreeBSD if the DATA was smaller than the default limit of 64 KiB.
Fix a race condition in SSLProtocol.connection_made() of
asyncio.sslproto: start immediately the handshake instead of using
call_soon(). Previously, data_received() could be called before the
handshake started, causing the handshake to hang or fail.
In this commit:
* Support BufferedProtocol in set_protocol() and start_tls()
* Fix proactor to cancel readers reliably
* Update tests to be compatible with OpenSSL 1.1.1
* Clarify BufferedProtocol docs
* Bump TLS tests timeouts to 60 seconds; eliminate possible race from start_serving
* Rewrite test_start_tls_server_1
* bpo-33263 Fix FD leak in _SelectorSocketTransport. (GH-6450)
Under particular circumstances _SelectorSocketTransport can try to add a reader
even the transport is already being closed. This can lead to FD leak and
invalid stated of the following connections. Fixed the SelectorSocketTransport
to add the reader only if the trasport is still active.
Fix typo from commit 6370f345e1
Signed-off-by: Christian Heimes <christian@python.org>
<!--
Thanks for your contribution!
Please read this comment in its entirety. It's quite important.
# Pull Request title
It should be in the following format:
```
bpo-NNNN: Summary of the changes made
```
Where: bpo-NNNN refers to the issue number in the https://bugs.python.org.
Most PRs will require an issue number. Trivial changes, like fixing a typo, do not need an issue.
# Backport Pull Request title
If this is a backport PR (PR made against branches other than `master`),
please ensure that the PR title is in the following format:
```
[X.Y] <title from the original PR> (GH-NNNN)
```
Where: [X.Y] is the branch name, e.g. [3.6].
GH-NNNN refers to the PR number from `master`.
-->
<!-- issue-number: bpo-32262 -->
https://bugs.python.org/issue32262
<!-- /issue-number -->
Fix the following bugs in the C implementation:
* get_future_loop() silenced all exceptions raised when look up the get_loop
attribute, not just an AttributeError.
* enter_task() silenced all exceptions raised when look up the current task,
not just a KeyError.
* repr() was called for a borrowed link in enter_task() and task_step_impl().
* str() was used instead of repr() in formatting one error message (in
Python implementation too).
* There where few reference leaks in error cases.
The proactor event loop has a race condition when reading with
pausing/resuming. `resume_reading()` unconditionally schedules the read
function to read from the current future. If `resume_reading()` was
called before the previously scheduled done callback fires, this results
in two attempts to get the data from the most recent read and an
assertion failure. This commit tracks whether or not `resume_reading`
needs to reschedule the callback to restart the loop, preventing a
second attempt to read the data.
bpo-31399: Let OpenSSL verify hostname and IP
The ssl module now uses OpenSSL's X509_VERIFY_PARAM_set1_host() and
X509_VERIFY_PARAM_set1_ip() API to verify hostname and IP addresses.
* Remove match_hostname calls
* Check for libssl with set1_host, libssl must provide X509_VERIFY_PARAM_set1_host()
* Add documentation for OpenSSL 1.0.2 requirement
* Don't support OpenSSL special mode with a leading dot, e.g. ".example.org" matches "www.example.org". It's not standard conform.
* Add hostname_checks_common_name
Signed-off-by: Christian Heimes <christian@python.org>
* bpo-32662: Implement Server.start_serving() and Server.serve_forever()
New methods:
* Server.start_serving(),
* Server.serve_forever(), and
* Server.is_serving().
Add 'start_serving' keyword parameter to loop.create_server() and
loop.create_unix_server().
Specifically, it's not possible to subclass Task/Future classes
and override the following methods:
* Future._schedule_callbacks
* Task._step
* Task._wakeup
* Add coro.cr_origin and sys.set_coroutine_origin_tracking_depth
* Use coroutine origin information in the unawaited coroutine warning
* Stop using set_coroutine_wrapper in asyncio debug mode
* In BaseEventLoop.set_debug, enable debugging in the correct thread
* Make ssh_handshake_timeout None by default.
* Raise ValueError if ssl_handshake_timeout is used without ssl.
* Raise ValueError if ssl_handshake_timeout is not positive.
asyncio.get_event_loop(), and, subsequently asyncio._get_running_loop()
are one of the most frequently executed functions in asyncio. They also
can't be sped up by third-party event loops like uvloop.
When implemented in C they become 4x faster.
* Convert asyncio/tasks.py to async/await
* Convert asyncio/queues.py to async/await
* Convert asyncio/test_utils.py to async/await
* Convert asyncio/base_subprocess.py to async/await
* Convert asyncio/subprocess.py to async/await
* Convert asyncio/streams.py to async/await
* Fix comments
* Convert asyncio/locks.py to async/await
* Convert asyncio.sleep to async def
* Add a comment
* Add missing news
* Convert stubs from AbstrctEventLoop to async functions
* Convert subprocess_shell/subprocess_exec
* Convert connect_read_pipe/connect_write_pip to async/await syntax
* Convert create_datagram_endpoint
* Convert create_unix_server/create_unix_connection
* Get rid of old style coroutines in unix_events.py
* Convert selector_events.py to async/await
* Convert wait_closed and create_connection
* Drop redundant line
* Convert base_events.py
* Code cleanup
* Drop redundant comments
* Fix indentation
* Add explicit tests for compatibility between old and new coroutines
* Convert windows event loop to use async/await
* Fix double awaiting of async function
* Convert asyncio/locks.py
* Improve docstring
* Convert tests to async/await
* Convert more tests
* Convert more tests
* Convert more tests
* Convert tests
* Improve test
* bpo-32101: Add sys.flags.dev_mode flag
Rename also the "Developer mode" to the "Development mode".
* bpo-32101: Add PYTHONDEVMODE environment variable
Mention it in the development chapiter.
* Remove asyncio.selectors and asyncio._overlapped symbols from the
namespace of the asyncio module
* Replace "from asyncio import selectors" with "import selectors"
* Replace "from asyncio import _overlapped" with "import _overlapped"
asyncio.selectors was added to support Python 3.3, which doesn't have
selectors in its standard library, and Python 3.4 in the same code
base. Same rationale for asyncio._overlapped. Python 3.3 reached its
end of life, and asyncio is no more maintained as a third party
module on PyPI.
The asyncio/compat.py file was written to support Python < 3.5 and
Python < 3.5.2. But Python 3.5 doesn't accept bugfixes anymore, only
security fixes. There is no more need to backport bugfixes to Python
3.5, and so no need to have a single code base for Python 3.5, 3.6
and 3.7.
Say hello (again) to "async" and "await", who became real keywords in
Python 3.7 ;-)
* Explicitly call shutdown(wait=True) on executors to wait until all
threads complete to prevent side effects between tests.
* Fix test_loop_self_reading_exception(): don't mock loop.close().
Previously, the original close() method was called rather than the
mock, because how set_event_loop() registered loop.close().
* bpo-30280: asyncio now cleans up threads
asyncio base TestCase now uses threading_setup() and
threading_cleanup() of test.support to cleanup threads.
* asyncio: Fix TestBaseSelectorEventLoop cleanup
bpo-30280: TestBaseSelectorEventLoop of
test.test_asyncio.test_selector_events now correctly closes the event
loop: cleanup its executor to not leak threads.
Don't override the close() method of the event loop, only override
the_close_self_pipe() method.
when there are no more `await` or `yield (from)` before return in coroutine,
cancel was ignored.
example:
async def coro():
asyncio.Task.current_task().cancel()
return 42
...
res = await coro() # should raise CancelledError
Some built-in coroutine-like objects might not have __name__ or
__qualname__. A good example of such are 'asend', 'aclose' and
'athrow' coroutine methods of asynchronous generators.
This implementation provides additional 10-20% speed boost for
asyncio programs.
The patch also fixes _asynciomodule.c to use Arguments Clinic, and
makes '_schedule_callbacks' an overridable method (as it was in 3.5).
Issue #23749: With this change it's possible to implement starttls
as a separate package on PyPI, or even by copying/pasting a small
snipped of code in your project.
It's expected that we'll figure out the API design for starttls
during 3.6, so that we can add it in 3.7.
