jepler/pico-mac
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
pico-mac/src/main.c
Jeff Epler 1c71dd765a
Some checks failed
Build pico-mac / bins (push) Has been cancelled
Details
Automute 1/2s after audio finishes playing
2025-03-28 11:48:47 -05:00

770 lines
23 KiB
C
Raw Blame History

/* pico-umac
*
* Main loop to initialise umac, and run main event loop (piping
* keyboard/mouse events in).
*
* Copyright 2024 Matt Evans
*
* Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation files
* (the "Software"), to deal in the Software without restriction,
* including without limitation the rights to use, copy, modify, merge,
* publish, distribute, sublicense, and/or sell copies of the Software,
* and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <stdio.h>
#include <unistd.h>
#include <string.h>
#include "hardware/clocks.h"
#include "hardware/gpio.h"
#include "hardware/pio.h"
#include "hardware/sync.h"
#include "pico/multicore.h"
#include "pico/stdlib.h"
#include "pico/time.h"
#include "hw.h"
#include "video.h"
#include "kbd.h"
#include "pio_usb_configuration.h"
#include "bsp/rp2040/boards/adafruit_fruit_jam/board.h"
#include "tusb.h"
#include "umac.h"
#include "clocking.h"
#if USE_SD
#include "f_util.h"
#include "ff.h"
#include "rtc.h"
#include "hw_config.h"
#endif
#if USE_PSRAM
#include "hardware/structs/qmi.h"
#include "hardware/structs/xip.h"
#endif
#if ENABLE_AUDIO
#include "pico/audio_i2s.h"
#include "hardware/i2c.h"
uint8_t *audio_base;
static void audio_setup();
static bool audio_poll();
static void set_mute_state(bool new_state);
static absolute_time_t automute_time;
#endif
////////////////////////////////////////////////////////////////////////////////
// Imports and data
extern void hid_app_task(void);
extern int cursor_x;
extern int cursor_y;
extern int cursor_button;
// Mac binary data: disc and ROM images
static const uint8_t umac_disc[] = {
#include "umac-disc.h"
};
static const uint8_t umac_rom[] = {
#include "umac-rom.h"
};
#if USE_PSRAM
#define umac_ram ((uint8_t*)0x11000000)
#else
static uint8_t umac_ram[RAM_SIZE];
#endif
#define MIRROR_FRAMEBUFFER (USE_PSRAM || DISP_WIDTH != 640)
#if MIRROR_FRAMEBUFFER
static uint32_t umac_framebuffer_mirror[640*480/32];
#endif
////////////////////////////////////////////////////////////////////////////////
static void io_init()
{
gpio_init(GPIO_LED_PIN);
gpio_set_dir(GPIO_LED_PIN, GPIO_OUT);
}
static void poll_led_etc()
{
static absolute_time_t last = 0;
absolute_time_t now = get_absolute_time();
if (absolute_time_diff_us(last, now) > 500*1000) {
last = now;
}
}
static int umac_cursor_x = 0;
static int umac_cursor_y = 0;
static int umac_cursor_button = 0;
#define umac_get_audio_offset() (RAM_SIZE - 768)
#if MIRROR_FRAMEBUFFER
static void copy_framebuffer() {
uint32_t *src = (uint32_t*)(umac_ram + umac_get_fb_offset());
#if DISP_WIDTH==640 && DISP_HEIGHT==480
uint32_t *dest = umac_framebuffer_mirror;
for(int i=0; i<640*480/32; i++) {
*dest++ = *src++;
}
#elif DISP_WIDTH==512 && DISP_HEIGHT==342
#define DISP_XOFFSET ((640 - DISP_WIDTH) / 32 / 2)
#define DISP_YOFFSET ((480 - DISP_HEIGHT) / 2)
#define LONGS_PER_INPUT_ROW (DISP_WIDTH / 32)
#define LONGS_PER_OUTPUT_ROW (640 / 32)
for(int i=0; i<DISP_HEIGHT; i++) {
uint32_t *dest = umac_framebuffer_mirror + (DISP_YOFFSET * LONGS_PER_OUTPUT_ROW + DISP_XOFFSET) + LONGS_PER_OUTPUT_ROW * i;
for(int j=0; j<LONGS_PER_INPUT_ROW; j++) {
*dest++ = *src++ ^ 0xffffffff;
}
}
#else
#error Unsupported display geometry for framebuffer mirroring
#endif
}
#endif
static void poll_umac()
{
static absolute_time_t last_1hz = 0;
static absolute_time_t last_vsync = 0;
absolute_time_t now = get_absolute_time();
umac_loop();
int64_t p_1hz = absolute_time_diff_us(last_1hz, now);
int64_t p_vsync = absolute_time_diff_us(last_vsync, now);
bool pending_vsync = p_vsync > 16667;
#if ENABLE_AUDIO
if (automute_time < now) {
automute_time = at_the_end_of_time;
set_mute_state(false);
}
#endif
#if ENABLE_AUDIO
pending_vsync |= audio_poll();
#endif
if (pending_vsync) {
#if MIRROR_FRAMEBUFFER
copy_framebuffer();
#endif
/* FIXME: Trigger this off actual vsync */
umac_vsync_event();
last_vsync = now;
}
if (p_1hz >= 1000000) {
umac_1hz_event();
last_1hz = now;
}
int update = 0;
int dx = 0;
int dy = 0;
int b = umac_cursor_button;
if (cursor_x != umac_cursor_x) {
dx = cursor_x - umac_cursor_x;
umac_cursor_x = cursor_x;
update = 1;
}
if (cursor_y != umac_cursor_y) {
dy = cursor_y - umac_cursor_y;
umac_cursor_y = cursor_y;
update = 1;
}
if (cursor_button != umac_cursor_button) {
b = cursor_button;
umac_cursor_button = cursor_button;
update = 1;
}
if (update) {
umac_mouse(dx, -dy, b);
}
if (!kbd_queue_empty()) {
uint16_t k = kbd_queue_pop();
umac_kbd_event(k & 0xff, !!(k & 0x8000));
}
}
#if USE_SD
static int disc_do_read(void *ctx, uint8_t *data, unsigned int offset, unsigned int len)
{
gpio_put(GPIO_LED_PIN, 1);
FIL *fp = (FIL *)ctx;
f_lseek(fp, offset);
unsigned int did_read = 0;
FRESULT fr = f_read(fp, data, len, &did_read);
gpio_put(GPIO_LED_PIN, 0);
if (fr != FR_OK || len != did_read) {
printf("disc: f_read returned %d, read %u (of %u)\n", fr, did_read, len);
return -1;
}
return 0;
}
static int disc_do_write(void *ctx, uint8_t *data, unsigned int offset, unsigned int len)
{
gpio_put(GPIO_LED_PIN, 1);
FIL *fp = (FIL *)ctx;
f_lseek(fp, offset);
unsigned int did_write = 0;
FRESULT fr = f_write(fp, data, len, &did_write);
gpio_put(GPIO_LED_PIN, 0);
if (fr != FR_OK || len != did_write) {
printf("disc: f_write returned %d, read %u (of %u)\n", fr, did_write, len);
return -1;
}
return 0;
}
static FIL discfp;
#endif
static void disc_setup(disc_descr_t discs[DISC_NUM_DRIVES])
{
#if USE_SD
char *disc0_name;
const char *disc0_ro_name = "umac0ro.img";
const char *disc0_pattern = "umac0*.img";
/* Mount SD filesystem */
printf("Starting SPI/FatFS:\n");
set_spi_dma_irq_channel(true, false);
sd_card_t *pSD = sd_get_by_num(0);
FRESULT fr = f_mount(&pSD->fatfs, pSD->pcName, 1);
printf(" mount: %d\n", fr);
if (fr != FR_OK) {
printf(" error mounting disc: %s (%d)\n", FRESULT_str(fr), fr);
goto no_sd;
}
/* Look for a disc image */
DIR di = {0};
FILINFO fi = {0};
fr = f_findfirst(&di, &fi, "/", disc0_pattern);
if (fr != FR_OK) {
printf(" Can't find images %s: %s (%d)\n", disc0_pattern, FRESULT_str(fr), fr);
goto no_sd;
}
disc0_name = fi.fname;
f_closedir(&di);
int read_only = !strcmp(disc0_name, disc0_ro_name);
printf(" Opening %s (R%c)\n", disc0_name, read_only ? 'O' : 'W');
/* Open image, set up disc info: */
fr = f_open(&discfp, disc0_name, FA_OPEN_EXISTING | FA_READ | FA_WRITE);
if (fr != FR_OK && fr != FR_EXIST) {
printf(" *** Can't open %s: %s (%d)!\n", disc0_name, FRESULT_str(fr), fr);
goto no_sd;
} else {
printf(" Opened, size %d (0x%x)\n", (unsigned)f_size(&discfp), (unsigned)f_size(&discfp));
if (read_only)
printf(" (disc is read-only)\n");
discs[0].base = 0; // Means use R/W ops
discs[0].read_only = read_only;
discs[0].size = f_size(&discfp);
discs[0].op_ctx = &discfp;
discs[0].op_read = disc_do_read;
discs[0].op_write = disc_do_write;
}
/* FIXME: Other files can be stored on SD too, such as logging
* and NVRAM storage.
*
* We could also implement a menu here to select an image,
* writing text to the framebuffer and checking kbd_queue_*()
* for user input.
*/
return;
no_sd:
#endif
/* If we don't find (or look for) an SD-based image, attempt
* to use in-flash disc image:
*/
discs[0].base = (void *)umac_disc;
discs[0].read_only = 1;
discs[0].size = sizeof(umac_disc);
}
static void core1_main()
{
disc_descr_t discs[DISC_NUM_DRIVES] = {0};
printf("Core 1 started\n");
disc_setup(discs);
umac_init(umac_ram, (void *)umac_rom, discs);
/* Video runs on core 1, i.e. IRQs/DMA are unaffected by
* core 0's USB activity.
*/
#if MIRROR_FRAMEBUFFER
video_init((uint32_t *)(umac_framebuffer_mirror));
#else
video_init((uint32_t *)(umac_ram + umac_get_fb_offset()));
#endif
#if ENABLE_AUDIO
audio_base = (uint8_t*)umac_ram + umac_get_audio_offset();
#endif
printf("Enjoyable Mac times now begin:\n\n");
while (true) {
poll_umac();
}
}
size_t psram_size;
size_t _psram_size;
static void __no_inline_not_in_flash_func(setup_psram)(void) {
_psram_size = 0;
#if USE_PSRAM
gpio_set_function(PIN_PSRAM_CS, GPIO_FUNC_XIP_CS1);
uint32_t save = save_and_disable_interrupts();
// Try and read the PSRAM ID via direct_csr.
qmi_hw->direct_csr = 30 << QMI_DIRECT_CSR_CLKDIV_LSB |
QMI_DIRECT_CSR_EN_BITS;
// Need to poll for the cooldown on the last XIP transfer to expire
// (via direct-mode BUSY flag) before it is safe to perform the first
// direct-mode operation
while ((qmi_hw->direct_csr & QMI_DIRECT_CSR_BUSY_BITS) != 0) {
}
// Exit out of QMI in case we've inited already
qmi_hw->direct_csr |= QMI_DIRECT_CSR_ASSERT_CS1N_BITS;
// Transmit as quad.
qmi_hw->direct_tx = QMI_DIRECT_TX_OE_BITS |
QMI_DIRECT_TX_IWIDTH_VALUE_Q << QMI_DIRECT_TX_IWIDTH_LSB |
0xf5;
while ((qmi_hw->direct_csr & QMI_DIRECT_CSR_BUSY_BITS) != 0) {
}
(void)qmi_hw->direct_rx;
qmi_hw->direct_csr &= ~(QMI_DIRECT_CSR_ASSERT_CS1N_BITS);
// Read the id
qmi_hw->direct_csr |= QMI_DIRECT_CSR_ASSERT_CS1N_BITS;
uint8_t kgd = 0;
uint8_t eid = 0;
for (size_t i = 0; i < 7; i++) {
if (i == 0) {
qmi_hw->direct_tx = 0x9f;
} else {
qmi_hw->direct_tx = 0xff;
}
while ((qmi_hw->direct_csr & QMI_DIRECT_CSR_TXEMPTY_BITS) == 0) {
}
while ((qmi_hw->direct_csr & QMI_DIRECT_CSR_BUSY_BITS) != 0) {
}
if (i == 5) {
kgd = qmi_hw->direct_rx;
} else if (i == 6) {
eid = qmi_hw->direct_rx;
} else {
(void)qmi_hw->direct_rx;
}
}
// Disable direct csr.
qmi_hw->direct_csr &= ~(QMI_DIRECT_CSR_ASSERT_CS1N_BITS | QMI_DIRECT_CSR_EN_BITS);
if (kgd != 0x5D) {
restore_interrupts(save);
return;
}
// Enable quad mode.
qmi_hw->direct_csr = 30 << QMI_DIRECT_CSR_CLKDIV_LSB |
QMI_DIRECT_CSR_EN_BITS;
// Need to poll for the cooldown on the last XIP transfer to expire
// (via direct-mode BUSY flag) before it is safe to perform the first
// direct-mode operation
while ((qmi_hw->direct_csr & QMI_DIRECT_CSR_BUSY_BITS) != 0) {
}
// RESETEN, RESET and quad enable
for (uint8_t i = 0; i < 3; i++) {
qmi_hw->direct_csr |= QMI_DIRECT_CSR_ASSERT_CS1N_BITS;
if (i == 0) {
qmi_hw->direct_tx = 0x66;
} else if (i == 1) {
qmi_hw->direct_tx = 0x99;
} else {
qmi_hw->direct_tx = 0x35;
}
while ((qmi_hw->direct_csr & QMI_DIRECT_CSR_BUSY_BITS) != 0) {
}
qmi_hw->direct_csr &= ~(QMI_DIRECT_CSR_ASSERT_CS1N_BITS);
for (size_t j = 0; j < 20; j++) {
asm ("nop");
}
(void)qmi_hw->direct_rx;
}
// Disable direct csr.
qmi_hw->direct_csr &= ~(QMI_DIRECT_CSR_ASSERT_CS1N_BITS | QMI_DIRECT_CSR_EN_BITS);
qmi_hw->m[1].timing =
QMI_M0_TIMING_PAGEBREAK_VALUE_1024 << QMI_M0_TIMING_PAGEBREAK_LSB | // Break between pages.
3 << QMI_M0_TIMING_SELECT_HOLD_LSB | // Delay releasing CS for 3 extra system cycles.
1 << QMI_M0_TIMING_COOLDOWN_LSB |
1 << QMI_M0_TIMING_RXDELAY_LSB |
16 << QMI_M0_TIMING_MAX_SELECT_LSB | // In units of 64 system clock cycles. PSRAM says 8us max. 8 / 0.00752 / 64 = 16.62
7 << QMI_M0_TIMING_MIN_DESELECT_LSB | // In units of system clock cycles. PSRAM says 50ns.50 / 7.52 = 6.64
2 << QMI_M0_TIMING_CLKDIV_LSB;
qmi_hw->m[1].rfmt = (QMI_M0_RFMT_PREFIX_WIDTH_VALUE_Q << QMI_M0_RFMT_PREFIX_WIDTH_LSB |
QMI_M0_RFMT_ADDR_WIDTH_VALUE_Q << QMI_M0_RFMT_ADDR_WIDTH_LSB |
QMI_M0_RFMT_SUFFIX_WIDTH_VALUE_Q << QMI_M0_RFMT_SUFFIX_WIDTH_LSB |
QMI_M0_RFMT_DUMMY_WIDTH_VALUE_Q << QMI_M0_RFMT_DUMMY_WIDTH_LSB |
QMI_M0_RFMT_DUMMY_LEN_VALUE_24 << QMI_M0_RFMT_DUMMY_LEN_LSB |
QMI_M0_RFMT_DATA_WIDTH_VALUE_Q << QMI_M0_RFMT_DATA_WIDTH_LSB |
QMI_M0_RFMT_PREFIX_LEN_VALUE_8 << QMI_M0_RFMT_PREFIX_LEN_LSB |
QMI_M0_RFMT_SUFFIX_LEN_VALUE_NONE << QMI_M0_RFMT_SUFFIX_LEN_LSB);
qmi_hw->m[1].rcmd = 0xeb << QMI_M0_RCMD_PREFIX_LSB |
0 << QMI_M0_RCMD_SUFFIX_LSB;
qmi_hw->m[1].wfmt = (QMI_M0_WFMT_PREFIX_WIDTH_VALUE_Q << QMI_M0_WFMT_PREFIX_WIDTH_LSB |
QMI_M0_WFMT_ADDR_WIDTH_VALUE_Q << QMI_M0_WFMT_ADDR_WIDTH_LSB |
QMI_M0_WFMT_SUFFIX_WIDTH_VALUE_Q << QMI_M0_WFMT_SUFFIX_WIDTH_LSB |
QMI_M0_WFMT_DUMMY_WIDTH_VALUE_Q << QMI_M0_WFMT_DUMMY_WIDTH_LSB |
QMI_M0_WFMT_DUMMY_LEN_VALUE_NONE << QMI_M0_WFMT_DUMMY_LEN_LSB |
QMI_M0_WFMT_DATA_WIDTH_VALUE_Q << QMI_M0_WFMT_DATA_WIDTH_LSB |
QMI_M0_WFMT_PREFIX_LEN_VALUE_8 << QMI_M0_WFMT_PREFIX_LEN_LSB |
QMI_M0_WFMT_SUFFIX_LEN_VALUE_NONE << QMI_M0_WFMT_SUFFIX_LEN_LSB);
qmi_hw->m[1].wcmd = 0x38 << QMI_M0_WCMD_PREFIX_LSB |
0 << QMI_M0_WCMD_SUFFIX_LSB;
restore_interrupts(save);
_psram_size = 1024 * 1024; // 1 MiB
uint8_t size_id = eid >> 5;
if (eid == 0x26 || size_id == 2) {
_psram_size *= 8;
} else if (size_id == 0) {
_psram_size *= 2;
} else if (size_id == 1) {
_psram_size *= 4;
}
// Mark that we can write to PSRAM.
xip_ctrl_hw->ctrl |= XIP_CTRL_WRITABLE_M1_BITS;
// Test write to the PSRAM.
volatile uint32_t *psram_nocache = (volatile uint32_t *)0x15000000;
psram_nocache[0] = 0x12345678;
volatile uint32_t readback = psram_nocache[0];
if (readback != 0x12345678) {
_psram_size = 0;
return;
}
#endif
}
int main()
{
#if defined(OVERCLOCK) && OVERCLOCK+0
overclock(CLK_SYS_264MHZ, 252000);
#endif
// set_sys_clock_khz(250*1000, true);
setup_psram();
stdio_init_all();
io_init();
#define SHOW_CLK(i) printf("clk_get_hz(%s) -> %u\n", #i, clock_get_hz(i));
SHOW_CLK(clk_gpout0);
SHOW_CLK(clk_gpout1);
SHOW_CLK(clk_gpout2);
SHOW_CLK(clk_gpout3);
SHOW_CLK(clk_ref);
SHOW_CLK(clk_sys);
SHOW_CLK(clk_peri);
SHOW_CLK(clk_hstx);
SHOW_CLK(clk_usb);
SHOW_CLK(clk_adc);
#if ENABLE_AUDIO
audio_setup();
#endif
multicore_launch_core1(core1_main);
printf("Starting, init usb\n");
pio_usb_configuration_t pio_cfg = PIO_USB_DEFAULT_CONFIG;
pio_cfg.tx_ch = 2;
pio_cfg.pin_dp = PICO_DEFAULT_PIO_USB_DP_PIN;
_Static_assert(PIN_USB_HOST_DP + 1 == PIN_USB_HOST_DM || PIN_USB_HOST_DP - 1 == PIN_USB_HOST_DM, "Permitted USB D+/D- configuration");
pio_cfg.pinout = PIN_USB_HOST_DP + 1 == PIN_USB_HOST_DM ? PIO_USB_PINOUT_DPDM : PIO_USB_PINOUT_DMDP;
#ifdef PICO_DEFAULT_PIO_USB_VBUSEN_PIN
gpio_init(PICO_DEFAULT_PIO_USB_VBUSEN_PIN);
gpio_set_dir(PICO_DEFAULT_PIO_USB_VBUSEN_PIN, GPIO_OUT);
gpio_put(PICO_DEFAULT_PIO_USB_VBUSEN_PIN, PICO_DEFAULT_PIO_USB_VBUSEN_STATE);
#endif
tuh_configure(BOARD_TUH_RHPORT, TUH_CFGID_RPI_PIO_USB_CONFIGURATION, &pio_cfg);
tuh_init(BOARD_TUH_RHPORT);
/* This happens on core 0: */
while (true) {
tuh_task();
hid_app_task();
poll_led_etc();
}
return 0;
}
#if ENABLE_AUDIO
#define I2C_ADDR 0x18
void writeRegister(uint8_t reg, uint8_t value) {
char buf[2];
buf[0] = reg;
buf[1] = value;
int res = i2c_write_timeout_us(i2c0, I2C_ADDR, buf, sizeof(buf), /* nostop */ false, 1000);
if (res != 2) {
printf("res=%d\n", res);
panic("i2c_write_timeout failed: res=%d\n", res);
}
}
uint8_t readRegister(uint8_t reg) {
char buf[1];
buf[0] = reg;
int res = i2c_write_timeout_us(i2c0, I2C_ADDR, buf, sizeof(buf), /* nostop */ true, 1000);
if (res != 1) {
panic("i2c_write_timeout failed: res=%d\n", res);
}
res = i2c_read_timeout_us(i2c0, I2C_ADDR, buf, sizeof(buf), /* nostop */ false, 1000);
if (res != 1) {
panic("i2c_read_timeout failed: res=%d\n", res);
}
uint8_t value = buf[0];
return value;
}
void modifyRegister(uint8_t reg, uint8_t mask, uint8_t value) {
uint8_t current = readRegister(reg);
uint8_t new_value = (current & ~mask) | (value & mask);
writeRegister(reg, new_value);
}
void setPage(uint8_t page) {
writeRegister(0x00, page);
}
void Wire_begin() {
i2c_init(i2c0, 100000);
gpio_set_function(20, GPIO_FUNC_I2C);
gpio_set_function(21, GPIO_FUNC_I2C);
}
static void setup_i2s_dac() {
gpio_init(22);
gpio_set_dir(22, true);
gpio_put(22, true); // allow i2s to come out of reset
Wire_begin();
sleep_ms(1000);
printf("initialize codec\n");
// Reset codec
writeRegister(0x01, 0x01);
sleep_ms(10);
// Interface Control
modifyRegister(0x1B, 0xC0, 0x00);
modifyRegister(0x1B, 0x30, 0x00);
// Clock MUX and PLL settings
modifyRegister(0x04, 0x03, 0x03);
modifyRegister(0x04, 0x0C, 0x04);
writeRegister(0x06, 0x20); // PLL J
writeRegister(0x08, 0x00); // PLL D LSB
writeRegister(0x07, 0x00); // PLL D MSB
modifyRegister(0x05, 0x0F, 0x02); // PLL P/R
modifyRegister(0x05, 0x70, 0x10);
// DAC/ADC Config
modifyRegister(0x0B, 0x7F, 0x08); // NDAC
modifyRegister(0x0B, 0x80, 0x80);
modifyRegister(0x0C, 0x7F, 0x02); // MDAC
modifyRegister(0x0C, 0x80, 0x80);
modifyRegister(0x12, 0x7F, 0x08); // NADC
modifyRegister(0x12, 0x80, 0x80);
modifyRegister(0x13, 0x7F, 0x02); // MADC
modifyRegister(0x13, 0x80, 0x80);
// PLL Power Up
modifyRegister(0x05, 0x80, 0x80);
// Headset and GPIO Config
setPage(1);
modifyRegister(0x2e, 0xFF, 0x0b);
setPage(0);
modifyRegister(0x43, 0x80, 0x80); // Headset Detect
modifyRegister(0x30, 0x80, 0x80); // INT1 Control
modifyRegister(0x33, 0x3C, 0x14); // GPIO1
// DAC Setup
modifyRegister(0x3F, 0xC0, 0xC0);
// DAC Routing
setPage(1);
modifyRegister(0x23, 0xC0, 0x40);
modifyRegister(0x23, 0x0C, 0x04);
// DAC Volume Control
setPage(0);
modifyRegister(0x40, 0x0C, 0x00);
writeRegister(0x41, 0x0); // Left DAC Vol, 0dB
writeRegister(0x42, 0x0); // Right DAC Vol, 0dB
// Headphone and Speaker Setup
setPage(1);
modifyRegister(0x1F, 0xC0, 0xC0); // HP Driver Powered
modifyRegister(0x28, 0x04, 0x04); // HP Left not muted
modifyRegister(0x29, 0x04, 0x04); // HP Right not muted
writeRegister(0x24, 50); // Left Analog HP, -26 dB
writeRegister(0x25, 50); // Right Analog HP, -26 dB
modifyRegister(0x28, 0x78, 0x00); // HP Left Gain, 0 db
modifyRegister(0x29, 0x78, 0x00); // HP Right Gain, 0 db
// Speaker Amp
modifyRegister(0x20, 0x80, 0x80); // Amp enabled (0x80) disable with (0x00)
modifyRegister(0x2A, 0x04, 0x04); // Not muted (0x04) mute with (0x00)
modifyRegister(0x2A, 0x18, 0x08); // 0 dB gain
writeRegister(0x26, 40); // amp gain, -20.1 dB
// Return to page 0
setPage(0);
printf("Audio I2C Initialization complete!\n");
}
static int volscale;
#define SAMPLES_PER_BUFFER (370)
int16_t audio[SAMPLES_PER_BUFFER];
void umac_audio_trap() {
set_mute_state(volscale != 0);
if(volscale) {
automute_time = make_timeout_time_ms(500);
}
int32_t offset = 128;
uint16_t *audiodata = (uint16_t*)audio_base;
int scale = volscale;
if (!scale) {
memset(audio, 0, sizeof(audio));
return;
}
int16_t *stream = audio;
for(int i=0; i<SAMPLES_PER_BUFFER; i++) {
int32_t a = (*audiodata++ & 0xff) - offset;
a = (a * scale) >> 8;
*stream++ = a;
}
}
struct audio_buffer_pool *producer_pool;
static audio_format_t audio_format = {
.format = AUDIO_BUFFER_FORMAT_PCM_S16,
.sample_freq = 22256, // 60.15Hz*370, rounded up
.channel_count = 1,
};
const struct audio_i2s_config config =
{
.data_pin = PICO_AUDIO_I2S_DATA_PIN,
.clock_pin_base = PICO_AUDIO_I2S_CLOCK_PIN_BASE,
.pio_sm = 0,
.dma_channel = 3
};
static struct audio_buffer_format producer_format = {
.format = &audio_format,
.sample_stride = 2
};
static void audio_setup() {
setup_i2s_dac();
const struct audio_format *output_format = audio_i2s_setup(&audio_format, &config);
assert(output_format);
if (!output_format) {
panic("PicoAudio: Unable to open audio device.\n");
}
producer_pool = audio_new_producer_pool(&producer_format, 3, SAMPLES_PER_BUFFER);
assert(producer_pool);
bool ok = audio_i2s_connect(producer_pool);
assert(ok);
audio_i2s_set_enabled(true);
}
static bool audio_poll() {
audio_buffer_t *buffer = take_audio_buffer(producer_pool, false);
if (!buffer) return false;
memcpy(buffer->buffer->bytes, audio, sizeof(audio));
buffer->sample_count = SAMPLES_PER_BUFFER;
give_audio_buffer(producer_pool, buffer);
return true;
}
static bool mute_state = false;
static void set_mute_state(bool new_state) {
if(mute_state == new_state) return;
mute_state = new_state;
setPage(1);
if(mute_state) {
modifyRegister(0x28, 0x04, 0x04); // HP Left not muted
modifyRegister(0x29, 0x04, 0x04); // HP Right not muted
modifyRegister(0x2A, 0x04, 0x04); // Speaker not muted
} else {
modifyRegister(0x28, 0x04, 0x0); // HP Left muted
modifyRegister(0x29, 0x04, 0x0); // HP Right muted
modifyRegister(0x2A, 0x04, 0x0); // Speaker muted
}
}
void umac_audio_cfg(int volume, int sndres) {
volscale = sndres ? 0 : 65536 * volume / 7;
set_mute_state(volscale != 0);
}
#endif
Reference in a new issue View git blame Copy permalink