adafruit-mirror/Adafruit_Wippersnapper_Arduino
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
Adafruit_Wippersnapper_Arduino/README.md
tyeth 45da7d327d Mention RP2350
2025-04-29 16:57:57 +01:00

2.6 KiB
Raw Permalink Blame History

Adafruit WipperSnapper

Build CIDocumentation

Adafruit.io WipperSnapper is a firmware designed to turn any Wi-Fi capable board into an Internet-of-Things (IoT) device. No code required!

WipperSnapper works with multiple microcontroller architectures and development boards. It is designed to be easily extensible to support new sensors, inputs, and outputs.

A free Adafruit IO account is required to use WipperSnapper.

Get Started

Learn how to install and use WipperSnapper by following this guide on the Adafruit Learning System - QuickStart: Adafruit IO WipperSnapper.

Get WipperSnapper

Pre-compiled binaries and UF2 files for supported hardware are provided on the releases page of this repository.

Supported Platforms

Platform MCU(s)
ESP32-x ESP32, ESP32-S2, ESP32-S3, ESP32-C3, ESP32-C6
ESP8266 ESP8266
RP2 RP2040/RP2350 MCU w/WiFi (i.e: Pico W)
ATSAMD SAMD51 MCU w/separate WiFi Co-Processor (i.e: Adafruit "AirLift")

Contributing to Adafruit.io and WipperSnapper

If you have a sensor, input, or output you'd like to add Adafruit IO support for it - we have a guide for contributing a new sensor to Adafruit.io and WipperSnapper here.

If you have a WiFi-enabled development board with a compatible microcontroller (see: "Supported Hardware" section above) and would like to add Adafruit IO support for it - we have a guide for adding a new board to Adafruit.io and WipperSnapper here.

Building WipperSnapper