* Update to Pico-SDK v1.5
* Hook in pico_rand, use ioctl to set ipv6 allmulti
* Move into PicoSDK LWIP mutex, hack timer sizes
* Utilize much of the PicoSDK infrastructure for WiFi
* Add WiFi::begin(ssid, pass, bssid)
* WiFiMulti to use BSSID, make more robust
WiFiMulti will now be more aggressive and try all matching SSIDs, in order
of RSSI, using the BSSID to identify individual APs in a mesh.
Before, if the highest RSSI AP didn't connect, it would fail immediately.
Now, it will go down the list, ordered by RSSI, to attempt to get a link.
* Add Bluetooth support from Pico-SDK
Able to build and run the HID Keyboard Demo from the Arduino IDE, almost
as-is.
Will probably need to make BT configurable. Enabling BT on a plain WiFi
sketch uses 50KB of flash and 16KB of RAM even if no BT is used.
* Separate picow libs, BT through menus, example
Build normal Pico.a and 4 different options for PicoW IP/BT configuration.
Use IP=>IP/Bluetooth menu to select between options.
* CMakefile rationalization
* Move BT TLV(pairing) out of last 2 flash sectors
The pairing keys for BT are stored at the end of flash by default, but
we use the last sector of flash for EPROM and the penultimate one for
the filesystem. Overwriting those in BT could cause some real exciting
crashes down the line.
Move the store to an app-build specific address using a dummy const
array to allocate space in the application image itself.
* PicoBluetoothHID with BT Mouse, Joystick, Keyboard
Add simple Bluetooth Classic HID helper function and port the existing
USB HID devices to it. Port their examples.
* Protect BT key storage from multicore
* Add short-n-sweet Bluetooth documents
* Add Bluetooth Serial port library
* Turn off BT when the BT libraries exit
The USB VID was always being set to the Raspberry Pi foundation code,
causing other brand boards to show up incorrectly.
Remove redundant values from the boards.txt and define a consistent
USB VID/PID and use it in the setup code.
See #1129 for more info
Instead of listing each board three times (normal upload, picoprobe,
and pico-debug uploads), list each board once and use a menu to select
the actual upload method.
Also add in picotool as an upload method for those folks who have trouble
with automounting.
Fix#1111
* add rough for scorpio
* Add SCORPIO items from ladyada
* Change PID in makeboards.py instead of boards.txt
* Fix PID in scorpio JSON
* README: Add Feather SCORPIO to supported boards
* Fix PIDs using values from MBAdafruitBoards
Still unsure about pid.[1-7] but let's see what happens
* boards.txt fixed by running makeboards.py
Co-authored-by: lady ada <limor@ladyada.net>
A new flexible and powerful "pluggable discovery" system was added to the Arduino boards platform framework. This system
makes it easy for Arduino boards platform authors to use any arbitrary communication channel between the board and
development tools.
Boards platform configurations that use the old property syntax are automatically translated to the new syntax by
Arduino CLI:
https://arduino.github.io/arduino-cli/latest/platform-specification/#sketch-upload-configuration
> For backward compatibility with IDE 1.8.15 and older the previous syntax is still supported
This translation is only done in platforms that use the old syntax exclusively. If `pluggable_discovery` properties are
defined for the platform then the new pluggable discovery-style `upload.tool.<protocol_name>` properties must be defined
for each board as well.
This platform includes a "UF2 Devices" discovery tool for `uf2conv` protocol ports. This tool now uses the modern
Arduino pluggable discovery system. `pluggable_discovery` properties were added to `platform.txt` in order to configure
the Arduino development tools to use this pluggable discovery tool. The `upload.tool.<protocol_name>` properties in
`boards.txt` were not updated at that time.
Global properties of that name were added to platform.txt, but this approach is not provided for by the Arduino Platform
specification:
https://arduino.github.io/arduino-cli/latest/platform-specification/#sketch-upload-configuration
> A specific upload.tool.<protocol_name> property should be defined for every board in boards.txt:
Those missing properties caused uploads to fail for users of the recent versions of Arduino IDE and Arduino CLI with an
error of the form:
Error during Upload: Property 'upload.tool.<protocol_name>' is undefined
(where `<protocol_name>` is the protocol of the selected port, if any)
It is also important to provide compatibility with versions of Arduino development tools from before the introduction of
the modern pluggable discovery system. For this reason, the old style `<board ID>.upload.tool` properties are retained.
Old versions of the development tools will treat the `<board ID>.upload.tool.<protocol_name>` properties as an unused
arbitrary user defined property with no special significance and the new versions of the development tools will do the
same for the `upload.tool` properties.
* Adds support for Challenger RP2040 WiFi boards
* Added Challenger board to makeboards build script
* Adds new challenger board with LTE modem.
* Updated after getting approved PID from Raspberry Pi
* Add support for reverse numbering of analog pins.
* Added minimal HW support for onboard WiFi modem.
* Added challenger-nb-rp2040-wifi and RPICO32 module.
* Updated PID for RPICO32
* Added a simple support class for challenger LTE boards
* Update ChallengerLTE.cpp
Fixed spelling error
* Adds option for setting USB max power in makeboards.py
* Added new board Challenger RP2040 LoRa
* Added new lora board to readme.
* Added missing SERIAL2 and LoRa module GIO pins.
* Added support for enabling UART CTS and RTS pins.
* Updated boards.txt after merge conflict of makeboards.py
* Fixed incorrect indention
* Fixed PR comments
* Add new Challenger RP2040 WiFi/BLE board (https://ilabs.se/challenger-rp2040-wifi-ble-datasheet)
* * Updated PID for WiFi/BLE board
* Added abstraction pins for both versions of wifi modules
* Added support for replacing support class serial port.
* Added support for retrieving support class serial port.
* Fixed spelling errors.
* Updated helper class for Challenger NB board.
* Added Challenger sdrtc and subghz boards.
* Updated readme.
* Re ran makeboards to generate new index.
* Added to possibility to have extra compiler directives for a board.
* Added extra compiler options to JSON generation.
* Allows having a list of extra macros to define
* Fixed incorrect USB PID for Challenger NB board.
* Added board initialization for all wifi boards.
Co-authored-by: Earle F. Philhower, III <earlephilhower@yahoo.com>
IPv4-only mode saves 20KB+ of flash memory.
Add some backwards compatibility with the global Arduino Ethernet
class when running in IPv4 only mode.
Fixes#687
* Speed P.IO build by not cloning 2GB of sources
* Document P.IO new option
* Add support for the WiFi chip on the Pico W board.
* USB interrupt now no longer hard coded (conflicted with the WiFi IRQ).
* Add in Pico W board to makeboards.py
* Add in GPIO and variant support
* Initialize WiFi in the Variant
* Use manual LWIP, fix size accounting
* Remove the SDK WiFi overrides
* Pulling in work done in the ESP8266 core.
* Make IPAddress support IPv6
* Build LWIP with IPv4 and IPv6 support
* Use proper MAC
* Avoid cyw_warn crash. Make macro to a comment while building
* Add WiFiServer
* Add WiFiUdp
* Move LWIP-specific support files to LWIP_Ethernet
* Add WiFi::ping (ICMP ping)
* Move ICMP echo (ping) to LWIPIntfDev
* Move hostByName to LwipIntfDev
* Add AP mode with simple DHCP server
* Add some examples and basic ESP8266 compat hacks
* Update Adafruit TinyUSB to fix crash
* Set DHCP hostname
* Make Wifi.begin() return CONNECTED with link + IP
* Return connected() on WiFi::begin
* Fix spurious TCP retransmission
* Protect LWIP from reentrancy
The Pico SDK calls "sys_check_timeouts() from inside a periodic interrupt.
This appears unsafe, as the interrupt could happen while already in the
(non-reentrant) LWIP code.
Block the interrupt from calling sys_check_timeouts by using a global flag
manually set via an RAII recursive lock.
Add interrupt protection macros around critical sections inside LWIP via
the standard defines.
These two changes should make LWIP significantly more stable and long
running.
* Support disconnecting and reconnecting WiFi
* Add WiFiServer simple example
* Update documentation
Fixes#666Fixed#665
* Shift arduino attribute higher in JSON file
* Try out PlatformIO CI
* Trigger CI
* Clone recursively, actually use own repo
* Fix YAML
* Build Verbose
* Revert to checkout@v2 version, add TinyUSB to examples
* Try fix TInyUSB example
* Pull repo recursively
* Use v3 after all, correct path to example
* Only do CI on PR
* Update board generation, use renamed function
* Update documentation with new platform integration state
* Remove accidentally pushed file
* Use correct update command
* Use correct highlighting
* Use correct language
* Add section on debugging
* Add docs on filesystem, minor corrections
* Use -iprefix in compilation, but still expose all include paths to IDE
* Add exception and RTTI support, document them
* Fix typo
The chip supports 133MHz and the other Pico core already defaults to
the higher speed, so make 133 the default.
It can still be changed through the menus and will stay at 125 unless
pre-existing users change it so they will see no difference.
* Remove redundant/wrong second board.mcu in boards.txt
Fixes#380
Boards.txt had the setting board.mcu twice. The first one was correct,
while the second one wasn't and shouldn't have been there. Remove it.
* Include fix from @rei-vilo in #381
By default RTTI (Run-Time Type Information) is disabled because most apps
don't need run time type info enabled. However, certain libraries expect
to be able to query types of objects at runtime, so add a menu to enable it.
* Adds support for Challenger RP2040 WiFi boards
* Added Challenger board to makeboards build script
* Adds new challenger board with LTE modem.
* Updated after getting approved PID from Raspberry Pi
* update included tinyusb to 1.2.0
move tusb_config.h from core to library for more portability
* pump tinyusb
* update tinyusb to 1.3.0
* try to fix ci warning
* add two variant files
* add trinkey and stemma friend
* add fast SPI transfer using pico-sdk blocks
* update makeboards.py for new variants
- STEMMA Friend RP2040
- Trinkey RP2040 QT
* run astyle on SPI library
* fix auto -> ssize type
* astyled
* woops ssizet != sizet!
* a nice day for a new board definition! this is a macropad with 12 keys, oled and rotary encoder
Co-authored-by: hathach <thach@tinyusb.org>
* add missing character for debug level "Wire"
if Debug Level "Wire" is chosen, the compiler posts error
> arm-none-eabi-g++: error: DDEBUG_RP2040_WIRE: No such file or directory
Add the missing '-' to correct the issue.
* change must be made via makeboards.py
The generator script needs to be fixed and rerun. If we just update the boards.txt, changes will be lost on a rebuild.
* Update boards.txt
boards.txt as generated by revised makeboards.py
* correct spelling issue for CI tool
* initial tinyusb lib port
* add Adafruit_TinyUSB_Arduino as submodules
* add yield() to main loop
* sync with tinyusb lib latest
* add USB manufacturer and product
* fix typo in tinyusb lib
* sync with master
updating implementation
* Rationalize link stage command line
Make the build process less insane.
* clean up delay
* clean up platform and board
* update makeboards.py for generating usbstack menu
* update tinyusb lib to 1.0.0
Heise.de seems to have been confused by the menu options for the
filesystem/sketch selection. Explicitly list the Sketch and FS sizes in
each menu tem to avoid future confusion.
Build all 4 different boot_stage2 objects with SPI/2 and SPI/4 options.
Add a menu to the generic board to allow selecting between them.
Use the potato/4 boot2 for the Adafruit Feather until we have a better
version verified.
Fixes#42
