* Update pins_arduino.h
Changed PIN_LED to match USERLED on PCB. Removed unavailable pins from SPI0 connection.
* Update pins_arduino.h
Uncommented SPI0 pins and reassigned them over GPIO 2,3,4,5.
* Convert to SDK RP2350A/B determination
Fixes#2878
The SDK uses `defined(PICO_RP2350) && !PICO_RP2350A` to indicate an RP2350B
chip, not the define PICO_RP2350B.
Match the SDK's usage by converting from `defined(PICO_RP2350B)` to
`defined(PICO_RP2350) && !PICO_RP2350A` and update the chip variants
accordingly.
* Need to explicitly override PICO_RP2350A for all
The *SDK*'s board definition file hardcodes a PICO_RP2350A value for
all boards, but we use the same board file for both A and B variants.
Override the SDK board definition in the variant definition file.
* Generic RP2350 needs 2-stage PICO_RP2350A setting
Also ensure SDK board definition included before pins_arduino.h for
clearing up redefinition errors.
* Factor out undef PICO_RP2350A
* Update Arduino.h
* Don't set SDFAT_FILE_TYPE, default is OK
Fixes#2772
No need to set SDFAT_FILE_TYPE=3 as that is the defaulr value with upstream
SdFat. Remove it from platform.txt and platform.io build.
* Codespell got all techy
* my attempt at adding plasma_2040 support.. cant seem to get it working to test yet though?
* Tracked+replaced files, this now works it seems!
* correct serial count
* Update pins_arduino.h
* Rudimentary Pimoroni Plasma2350 support.
* include correct files + changes needed for proper support.
also!! fixes pin definitions for the i2c on Pimoroni Plasma 2350 (tested, working) and (presumably, untested) on the Plasma RP2040 too by swapping the i2c numbers. i2c now works!!
* use correct USB PID for Plasma 2350
Adds a menu item to enable onboard profiling. This requires significant
RAM and really only makes sense on devices with PSRAM to store the state.
When the menu item is selected, allocates RAM and tracks function calls and
periodically samples the PC to generate a histogram of application usage.
The onboard gmon.out file can be written over Semihosting or
some other way to transfer to a PC for analysis.
Adds a profiling example with command lines.
Using pico-sdk develop branch, add in support for CYW43-based
WiFi/BT/BLE boards on the RP2350 such as the
SparkFun Thing Plus RP2350 or the Pimoroni Pico Plus 2W.
Fixes#2608
Rolls in dynamic SPI divider #2600
* Support LED digitalWrite on RP2350+CYW
Also move "special GPIO" to 64 since the Pimoroni Pico 2W uses the
RP2350B with 48 GPIOs.
* Enable CYW43_PIN_WL_DYNAMIC in IDE and P.IO
Allows calling `cyw43_set_pins_wl(cyw43_pin_array);` to redefine the
CYW43 hookup in the variant initialization.
* Add SparkFun Thing Plus RP2350
* Add Thing Plus RP2350 PSRAM definition
* Remove radio from Thing Plus RP2350
Will need to add back once full radio support is added, see #2605
* Adds a menu item for selecting type of ESP wifi type.
* Updated pin definitions to work with ESP hosted.
* Fixed residual debug modification.
* Added ESPHost support library.
* Removed local cloning of ESPHost and added to excluded from CI
* Updated boards.txt
---------
Co-authored-by: Pontus Oldberg <pontus.oldberg@non.se.com>
* Add support for the extra 16 GPIO pins in the menus and core.
* Clean up Generic RP2350 PSRAM ("none" is valid) and flash (other than 16MB) options.
* Add extra GPIO<->peripheral connections
* Add Pimoroni PGA2350 RP2350B-based board
* Pins 32-47 can be used for PIOPrograms
* Avoid hang when PSRAM fails to initialize
* Move libpico to an RP2350B board for SDK (otherwise the SDK drops all GPIOHI support)
