Add sample which clearly and thorougly shows how to use RTIO with
I2C controllers, both synchronously and async, comparing it with
the "standard" I2C API, in an controlled environment. Both the I2C
controller and I2C target are managed by the sample, using loopback
to monitor and control the I2C transfers.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Convert vendor specific **_WIFI_BUILD_ONLY_MODE symbol as global
in order to provide common build flag to enable CI with no blobs.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Add a new option to control usage of DT nodelabel board_power. This
option also allows to select GPIO when needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add options to control the behavior of sw0/sw1. These options also allow
to select GPIO when needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new option to control the behavior of sw0. This option also allows
to select GPIO when needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new option to control led0 behavior. If enabled, led0 will be used
for blinking. This option also allows to select GPIO when needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new Kconfig option to control the behavior of sw0. If enabled, sw0
button will be used for provisioning. This option also allows to select
GPIO.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new Kconfig option to control the behavior of led0. This option
also allows to select GPIO only when needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fixes an issue introduced with commit
c6ad4a7927 which wrong restarts
advertising after a device connects when it should only restart
advertising if a device fails to connect
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
It reports Advanced Pedometer and Event Detection features,
such as Pedometer, Tilt detection, Wake on Motion and
Significant Motion Detector. Device tree options.
Signed-off-by: Aurelie Fontaine <aurelie.fontaine@tdk.com>
Update central multilink sample to get version info to
verify actual data transmissions will succeed, and there is
no disconnect with reason connection fail to be established.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update central multilink sample to use continuous scanning
to speed up connection setup.
Update peripheral identity sample to be configurable for
bsim testing as multiple devices with configurable count
of supported connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
With changes introduced in commit 6a3602a306
("net: buf: Clear `user_data` on allocation")
our memset() calls are redundant.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The Bluetooth HCI USB transport layer implementation is provided by
"subsys/usb/device/class/bluetooth.c". The USB H4 Bluetooth function
implements a non-standard transport layer. There is no known host-side
equivalent that uses this protocol.
Note that the H4 protocol functionality is also provided by the
"subsys/usb/device/class/bluetooth.c".
Since that there are no real USB H4 Bluetooth users, remove the
implementation and sample without deprecation.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add Devicetree overlay for sample drivers/led/pwm and fix the one in
basic/blinky_pwm for nucleo_l4r5zi board to set appropriate to enable
pwdleds and set appropriate timer prescaler.
Signed-off-by: Yishai Jaffe <yishai1999@gmail.com>
The Adafruit QT Py ESP32-S3 needs to have GPIO hogs enabled in order to
use the onboard RBG LED with the led_strip sample code.
Signed-off-by: Ian Wakely <raveious.irw@gmail.com>
For the latest upstream, if MBEDTLS_ENABLE_HEAP is not enabled, it will
default select MBEDTLS_PSA_STATIC_KEY_SLOTS, and consume extra SRAM for
about 35KB. Therefore, default enable MBEDTLS_ENABLE_HEAP.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Remove CONFIG_HEAP_MEM_POOL_SIZE for RW612, it will use
HEAP_MEM_POOL_ADD_SIZE_ way to add all module's heap size
together, to better control heap size for different case.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
uart_irq_update() should always be called in IRQ processing callback.
From API documentation:
"This function should be called the first thing in the ISR. Calling
uart_irq_rx_ready(), uart_irq_tx_ready(), uart_irq_tx_complete()
allowed only after this."
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Do hflipping at camera level to avoid using PxP which impacts camera
framerates on RT10xx. Moreover, on RT11xx, PxP is already reserved
for 90 CCW image rotation.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Add an option to mirror the video image horizontally. This helps
to avoid doing so at the post-processing step by using additional
HW such as PxP on i.MX RT platforms.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Make APP_CPU board name auto generated and remove the related config.
Remove the boards overlay and replace with a socs overlays.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Separate wifi example user config file to wifi network configurations
and hostap configurations.
User can set EXTRA_CONF_FILE as overlay-hostap.conf file to get
external hostap support.
Without overlay-hostap.conf, we will have embedded hostap.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Testcase uses certificates from the sample application at
samples/net/sockets/http_server. These were modified and moved into a
different folder by a previous commit, causing a build failure in the
test.
Testcase updated to:
- use new path to certificates
- update available cipher suites, since certificates now use ECDSA
- update expected hostname in certificate
The CA certificate in the sample app is also converted to .der format
for inclusion in the test (the content is exactly the same as the PEM
version, just converted to DER).
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
MONOLITHIC_NXP_NBU cannot be used in CI as it relies on firmware blobs
to be fetched.
Disabling the feature so the CI can pass.
Also tagging this test as build_only.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This PR fixes a blocking call to video_buffer_alloc in case of memory
shortage by addign a timeout parameter to the API.
Signed-off-by: Armin Kessler <ake@espros.com>
MONOLITHIC_NXP_NBU cannot be used in CI as it relies on firmware blobs
to be fetched.
Disabling the feature so the CI can pass.
Also tagging this test as build_only.
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
Using HTTP/2 to communicate with the sample application using a web
browser requires some additional steps. Add documentation describing
this to the sample README file.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Add application level Kconfig option to enable ALPN usage for
negotiating HTTP/2 connection with web browsers.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Existing cipher suites and certificates used by HTTP server sample are
included in RFC9113 Appendix A: Prohibited TLS 1.2 Cipher Suites. The
RFC specifies that when using HTTP/2, these cipher suites may be treated
as an error of type INADEQUATE_SECURITY, and in practice it seems that
Chrome and Firefox do implement this.
The certificates have been updated to use ECDSA-P265 signatures, and
supported cipher suites updated to include ECDH key exchange and AES GCM
and CCM modes.
Some scripts are included to allow users to generate their own
certificates if desired.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Remove the CONFIG_NET_SAMPLE_CERTS_WITH_SC option and make the CA-signed
certificate the only option - there is no real downside to this over
using the unsigned certificate.
Remove adding of CA certificate as a TLS credential on the server, since
this credential is not used by the server. It may be useful to include
in any client code used to communicate with the server, so the
certificate itself is retained.
After this, some TLS tag enumerations are unused so have been removed.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Several tests were using K_FOREVER when allocating the
buffer for TX in the system workqueue, which is illegal behavior.
The solution chosen was to create a TX thread to handle TX,
similar to the solution used in the audio shell and some
sample applications.
This way we can continue to use K_FOREVER when allocting buffers
and it will always be done in a round-robin fashion while
TXing as much as possible, by always enqueuing all the buffers
with mock data.
Since this works for all streams (both broadcast and unicast),
it was obvious to use the same implementation for all tests,
and thus cleaning up the tests a bit and more them more similar.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Combine BLE and 802.15.4 monolithic build under a single config to make
it less error prone.
The choice between a BLE/802.15.4 combo firmware and a BLE only firmware
is done depending on the Soc (like RW610 vs RW612).
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
Commit 55d9d1c6ba
("samples: led: consolidate LED samples under same directory")
moved the led_strip sample from samples/drivers to samples/drivers/led.
But commit f54a53b4b3
("drivers: ws2812_gpio: Make timing configurable and less hardware
dependend") was merged at the same time and added the bbc_microbit.conf
file to the old location.
This patch moves bbc_microbit.conf to its correct location.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
If/when "zephry,entropy" is enabled CONFIG_ENTROPY_GENRATOR is
automatically enabled, therefore enabling the corresponding
platform entropy driver. On some platform this is a problem
because the entropy driver is not used directly as random
source, but only to seed the ctr-drbg algorithm provided
by Mbed TLS. Unfortunately CONFIG_MBEDTLS_CIPHER_MODE_CTR_ENABLED
cannot be directly enabled because CONFIG_MBEDTLS_CFG_FILE used
in mcuboot is different from the "config-tls-generic.h" which
is required to use Kconfig symbols defined in
"zephyr/modules/mbedtls/Kconfig.tls-generic".
Moreover entropy and random number generators are not required
in mcuboot because signature verification is a
deterministic operation.
In conclusion this commit disables "zephyr,entropy" in
mcuboot DTS overlay file.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
ENTROPY_GENERATOR is now automatically enabled if the board
has "zephyr,entropy" chosen property set, so there is no need
to manually select it.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Refactor the function to use net_buf_pull_mem instead of the
offset variable when decoding.
Since the offset value was always 0 before, this fixes the
incorrect decoding.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
It is no longer needed to enable a specific flash driver in the sample
configuration. An appropriate driver (together with its dependecies,
like the SPI bus) for a given target will be enabled automatically
based on what is enabled in DTS.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
It is no longer needed to enable a specific flash driver in the sample
configuration. An appropriate driver (together with its dependencies,
like the SPI bus) for a given target will be enabled automatically
based on what is enabled in DTS.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Correct "zephyr,sram" property under /chosen node to make board and samples
compatible with new SoC memory description.
Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>
Use the broadcast sink callbacks to set the semaphores
rather than the stream callbacks, as the broadcast sink callbacks
are better for that as they are called when all streams are ready.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use the broadcast source callbacks to set the semaphores
rather than the stream callbacks, as the broadcast source callbacks
are better for that as they are called when all streams are ready.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add set the parameter `type` to value
`BT_SDP_DISCOVER_SERVICE_SEARCH_ATTR`.
Update the SDP discovery callback function by adding a third parameter
`const struct bt_sdp_discover_params *params`. Make it align with
`bt_sdp_discover_func_t`.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Deprecate mode which is using TIMER+(D)PPI for reliable byte counting.
Recently a new approach is added (CONFIG_UART_NRFX_UARTE_ENHANCED_RX)
which supports reliable byte counting without additional HW resource.
This mode is planned to be the only supported RX path mode.
Enhanced RX has slightly different behavior. There are no partial RX
packets (events with non-zero offset). There is UART_RX_BUF_RELEASED
after each UART_RX_RDY event.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
This sample enables and configures the MCO1/2 output
for stm32 target boards.
MCO_PRE_DIV_n is defined by the stm32XX_clock.h
Signed-off-by: Francois Ramu <francois.ramu@st.com>
When publish message, the dup_flag is not intialize
causing it to have random value and making the AWS MQTT
broker to reject the message
Add initialize dup_flag as 0
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
Signal-to-noise ratio is a unitless quantity, so its unit is dB, not
dBm (dBm is the power relative to 1 milliwatt). At the same time output
the received payload using `LOG_HEXDUMP_INF`, instead of limiting the
sample solely to string payloads.
Fixes#82414
Signed-off-by: Jordan Yates <jordan@embeint.com>
Convert them to native YAML lists. Support for space-separated
lists was deprecated in Twister a long time ago.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Concurrent HTTP POST requests on different HTTP2 concurrent streams
require that the client's header_capture_context is re-used to capture
headers on a second stream before all of the body data has been received
(and sent to the application) on the first stream.
As a result, any captured headers must be sent to the application
callback before any headers can be received on a different stream. In
practice this means that for HTTP2 the application callback is called
for the first time on receiving a headers frame, before any data frames
are received. All subsequent application callbacks will not include the
request header data.
While this mechanism is not necessary for HTTP1, it is also updated to
only send headers in the first application callback for consistency.
Fixes#82273
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Implement a sample app to perform basic GPIO tracing.
Signed-off-by: Alexander Lay <alexanderlay@tenstorrent.com>
Signed-off-by: Yang Xu <yangxu@tenstorrent.com>
If GPIO tracing is enabled, then the system will track
various GPIO pin events.
Signed-off-by: Alexander Lay <alexanderlay@tenstorrent.com>
Signed-off-by: Yang Xu <yangxu@tenstorrent.com>
Default the Minimum encryption key size to 16.
Key with reduced size is easier to brut force.
Disable LE legacy pairing by default since it's not secure.
These defaults should suite majority of newly developed applications.
It's better to use sensible more secure defaults,
so applications that really need less secure option consciously change it,
not the other way around.
This may help to prevent downgrade attacks.
Signed-off-by: Sergey Korotkov <sergey.korotkov@nordicsemi.no>
Deprecate BT_CTLR, and add a new HAS_BT_CTLR as a virtual option which
specific users (like BT_LL_SW_SPLIT) select. This also means that we can
remove all places that were forcefully enabling the BT_CTLR option, and
instead we now depend on devicetree to get some local LL HCI driver
enabled which in turn also enables the HAS_BT_CTLR option.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Rename "nxp,kinetis-wdog32" compatible to "nxp,wdog32" to remove the
device family from its name.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Removed implying of NVS by the NET_L2_OPENTHREAD, and from now a
platform can choose between ZMS and NVS as a settings backend.
NET_L2_OPENTHREAD still requires NVS or ZMS backend so the config
depends on one of those.
Signed-off-by: Arkadiusz Balys <arkadiusz.balys@nordicsemi.no>
Gap filling in hex files are now disabled per default, and therefore
there is no reason to explicitly disable gap filling.
It has never been possible to disable gap filling in binary files.
Disabling gap filling would just result in the binary file to be gap
filled with the tool's default value, objcopy=0x00.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Change `GPIO39` to `GPIO38` in overlay.
The esp32s3_devkitc rgb led is connected to GPIO38, not 39.
Tested change on board and verified to function as intended.
Signed-off-by: david burke <david@aheng.io>
This reverts commit 184c0f9e9d.
Reducing system heap memory to 1024 caused runtime failures on some
platforms. This commit revert that change and return to the previous
size.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Moving from TinyCrypt to PSA Crypto API caused failures in the cpu_net
build due to RAM being overflowed. It turned out that 8192 bytes were
allocated for system heap memory, but Mbed TLS is the only user
of that memory (I found this though puncover) for AES purposes.
We reduce that to 1024 bytes because this should be enough for
this purpose.
Note: albeit this is also a standalone example, it's used extensively
in other samples/tests and babblesim, so a failure in building it
propagates in a lot of other failures.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Moving from TinyCrypt to PSA Crypto API caused an entropy source
to be always required, so this commit adds it in tests where
necessary.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
As part of the work of deprecating TinyCrypt in favor of
PSA crypto API, this commit fixes some kconfigs in order to
reduce the RAM footprint. In all involved samples RAM usage
was extremely high even with TinyCrypt (usually > 98%) and
of course it got overflowed once TinyCrypt got replaced by
Mbed TLS's PSA Crypto API.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This commit sets PSA Crypto API as the default library to perform
ECC-DH in HCI, replacing TinyCrypt (which is being deprecated).
Therefore the symbol BT_TINYCRYPT_ECC is renamed as BT_SEND_ECC_EMULATION.
References in samples/tests are also fixed.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
CONFIG_BT_USE_PSA_API was used in BT crypto/host modules to select
PSA crypto API over TinyCrypt (which was the default until now).
Since TinyCrypt is being deprecated and PSA crypto API is the new
standard library for crypto operations, CONFIG_BT_USE_PSA_API is
no more needed.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This uses Linux V4L2 controls as a reference to give names to the
CIDs. Apply the renaming down to the drivers that use them.
Signed-off-by: Josuah Demangeon <me@josuah.net>
Unless the PHY is managed by LE power control, the CS procedure phy
needs to match the ACL phy.
Disabling the auto phy updates keeps the ACL on 1M.
The alternative would be to read the current phy by enabling
BT_USER_PHY_UPDATE but this still doesn't work if the phy is changed
after being read.
Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>
Handling the security changed callback was missing, so it could happen
that the sample would try to read remote capabilities before the link
was encrypted, which is not allowed.
Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>
Because the number of ACL RX buffers must be at least the number of
maximum connections plus one, increasing `CONFIG_BT_MAX_CONN` could
inadvertently lead to a build failure if the number of ACL RX buffers is
not also increased. This dependency may not be obvious to users.
To address this issue, this commit deprecates the
`CONFIG_BT_BUF_RX_COUNT` Kconfig symbol and computes the value in
`buf.h` using the new `BT_BUF_RX_COUNT` define. Note that the default
value and the minimum range value have been changed to 0 to "disable"
the option.
Additionally, to allow users to increase the number of ACL RX buffers,
this commit introduces the new `CONFIG_BT_BUF_RX_COUNT_EXTRA` Kconfig
symbol. The value of this symbol will be added to the computed value of
`BT_BUF_RX_COUNT`.
The configurations of tests and samples have been updated to reflect
these changes.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
The README files of these samples already indicate that they use the
Zephyr-specific HCI vendor extensions, but this may still not be clear
enough to some users, as evidenced in #81779. Add build asserts to make
sure the samples only build when Zephyr VS extensions have been enabled.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
This sample requires Zephyr HCI vendor extension support by the used
Bluetooth controller. In the case of qemu this needs to be explicitly
indicated by enabling the corresponding devicetree property.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
add display type for fixtures to avoid conflcts
in NXP platform
1. add required regex for console harness.
2. add message after processing, ensure the flow is OK
3. reduce the test time in TEST mode
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Add collector parameter to metric creation macros so that it
is possible to bind the metric to collector already at built
time.
Also add optional user_data to metric macro calls so that user
can add optional data there. This will be used by network statistics
Prometheus support in subsequent commits.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Embed "struct prometheus_metric" to individual metric like
counter, gauge, histogram and summary. This way we avoid having
a separate base pointer in specific metrict struct. We also do
not need to search the specific metric from base metric as
we can simply use CONTAINER_OF() macro to get the base metric.
This embedding means that the counter, gauge, histogram and summary
metric define macros are changed as user does not need to create a
separate "struct prometheus_metric".
Convert the tests and sample to use the new macros.
Remove also the static from metric creation macros so that user
can decide whether it needs collector to be static or not.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add a simple demonstration of the led_write_channels api on the lp5569
driver sample.
The demonstration simply turns on all of the channels with a single call to
led_write_channels. Then the same is done for turning off the channels.
Thus, it doesn't add much visually, but it shows the usage of the api.
Signed-off-by: Emil Dahl Juhl <emdj@bang-olufsen.dk>
Reducing the heap requirement for the hci_ipc sample from
8KiB to 4KiB. It has been tested in various configurations to
work with 2300, but 4KiB was used to provide some leeway for
future updates.
The heap requirement is not documented, and it is unclear why
values lower than 2300 (not exact number) won't boot, and should
be investigated further.
Memory has become a very scarce resource for especially the ISO
builds for the nRF5340, which is why this is getting reduced.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This PR adds arduino giga r1 overlay in the dac sample.
Arduino Giga R1 has a 3.5mm audio jack connected to the
dac.
Signed-off-by: Mario Paja <mariopaja@hotmail.com>
This is a follow-up to 21475774fc,
extending the number of tests and samples that use the new L05 and L10.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update the connection and advertising intervals of the
broadcast and connected ISO samples (including benchmark
samples) to work better with the selected SDU intervals
and the resulting ISO intervals.
For the ISO connected benchmark the order of CIG and ACl
has changed, so that we create the CIG before connecting
the ACL for the purpose of providing as much information
as possible to the controller.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add EAP-TLS, EAP-PEAP-MSCHAPv2, EAP-PEAP-GTC, EAP-TTLS-MSCHAPv2,
EAP-PEAP-TLS, EAP-TLS-SHA256 enterprise wpa2 and wpa3 suiteb
support for sap.
Signed-off-by: Rex Chen <rex.chen_1@nxp.com>
The required ISO Tx buffers have to match the Read Buffer
Size values, otherwise the difference in the value cause a
similar amount of buffers to be stalled in the IPC driver.
Use reduced HEAP size to make room for increase in RAM
usage.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation for Extended Advertising Auxiliary PDUs
to use ticks slot window feature.
This will allow the periodic scheduling of AUX_ADV_IND PDUs
to drift upto 10 ms advertising delay minus the ticks_slot
time reservation of the AUX_ADV_IND PDU when overlapping
with other states/roles that cannot be moved around, to
avoid skipping them.
Having an active Extended Advertising simultaneously with
an ISO Synchronized Receiver or Connected ISO connection
will now have less ISO SDU loss when using 10 ms ISO
intervals.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Exclude stm32 platforms with accel0 or magn0
for running the samples/sensor for trigger
as their sensor driver does not have trigger set.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This addresses the following warning building with `CONFIG_64BIT=y`:
error: field precision specifier '.*' expects argument of type 'int',
but argument X has type 'size_t' {aka 'long unsigned int'}
Signed-off-by: Chen Xingyu <hi@xingrz.me>
Move "bluetooth" tag and harness from the common section
of the smp_svr sample.yaml file to "bluetooth" specific test cases.
Signed-off-by: Andrej Butok <Andrey.Butok@nxp.com>
The nRF54L05 and nRF54L10 are identical to the nRF54L15 except for their
memory sizes. Add support for emulating those ICs on the nRF54L15DK.
This commit only adds support for the main application core. Support for
the FLPR core may be added later.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Change the select to a depends on for the Kconfig options
for HAS and HAS_CLIENT.
This is an effort to reduce the number of selects used by
LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change the select of BT_PER_ADV_SYNC and BT_EXT_ADV to
depends on. This is an effort to reduce the use of
select for Kconfig options.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify ASCS and BAP Broadcast sink to depend on the PAC options
instead of selecting them.
Since Kconfig does not support "depends on X if Y",
a select for PAC_{SRC,SNK} is used depending on
ASCS_ASE_{SRC,SNK}.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The BAP Kconfigs option now depends on
BT_ISO_BROADCASTER instead of selecting it.
This is an effort to reduce the use of select in LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The BAP_BROADCAST_SOURCE Kconfig option now depends on
BT_ISO_BROADCASTER instead of selecting it.
This is an effort to reduce the use of select in LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify the Kconfig options to depend on the GATT
features rather than selecting them.
This is part of an effort to reduce the amount of
selects we use in LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
A valid device tree configuration is provided for the ADCs of the 8 input
channels and the sample adc_dt works out of the box. Obviously this is
not the only possible configuration but it provides a good template for
further customization without the need to lookup the ADC GPIOs and
connections in the schematics.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
