Add test that checks reset cause reported by HWINFO.
Check that hwinfo_get_supported_reset_cause() returns
expected value.
Check that hwinfo_get_reset_cause() correctly detects:
- RESET_PIN,
- RESET_SOFTWARE,
- RESET_WATCHDOG.
Check that reset cause can be cleared
with hwinfo_clear_reset_cause().
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Recent kernel drivers for some devices have swapped the mailbox device
used for replies. It used to be that all commands in either direction
were sent on mbox0 and all replies on mbox1. Now mbox0 handles
commands and replies for "DSP to Host" communication, and mbox1 is for
"Host to DSP". Listen to both devices for our simple test.
Signed-off-by: Andy Ross <andyross@google.com>
Add ztests for nrf70 bus lib to help validate functional integrity
of the QPSI/SPI interface to nRF70 device via appropriate reads/writes
from host processor to relevant memory blocks of nrf70 device.
Note that this will NOT serve as a memory test for nrf70 device,
rather just a functional verification of the wiring between the host
processor and the nrf70 device.
Signed-off-by: Bansidhar P.M <bansidhar.mangalwedhekar@nordicsemi.no>
Convert them to native YAML lists. Support for space-separated
lists was deprecated in Twister a long time ago.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
These are very similar devices to mt8195, minimal changes needed
beyond boilerplate configuration.
In the process, this reworks the board/soc layout to be HWMv2
compliant, with "adsp" becoming a CPU cluster beneath the SOC. So the
name of the boards to west become e.g. "mt8195/mt8195/adsp" (which can
be shortened to "mt8195//adsp" if desired).
Note that the cpuclk driver is not yet ported, it works only with 8195
(the clocking/power architecture seems similar between the parts, but
the graph of wells and clocks is different and historically these have
been three separate drivers in SOF). The biggest changes are in the
image/loader scripts, which needed some rework for cross-device
portability.
Signed-off-by: Andy Ross <andyross@google.com>
This is a feature of the 8195 DSP only, which is used only vestigially
by SOF to store data that nothing reads. The Linux kernel on the
other side uses a shared driver for all 81xx devices, which does not
expose the feature. It seems to work, but it's not worth maintaining
a driver in tree for legacy hardware that will never use it.
Signed-off-by: Andy Ross <andyross@google.com>
The SSP driver has odd dependency to outside definition of
CONFIG_INTEL_NM. This is in practise tied to SSP hardware
version and always enabled for SSP block version 1.0.
Use the new SSP_IP_VER define to replace the CONFIG_INTEL_MN
preprocssor checks. Also modify the board test case to
remove the obsolete config setting.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Change pins that are used for qdec nrf54h20dk to align with shield
(loopbacks) used in internal CI. This change is needed to start
qdec driver power management testing.
Signed-off-by: Piotr Krzyzanowski <piotr.krzyzanowski@nordicsemi.no>
Test was failing because after re-enabling QDEC there is an interrupt
REPORTRDY coming after some time. Test had k_msleep(100) added to
accomodate for that but it was added after sensor_sample_fetch and
should be added before so that sample with data from REPORTRDY event
is fetched so that next read is empty as expected.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
A bunch of copy-paste mistakes when adding the nRF54L15 DK added stale
references to the Preview DK (PDK).
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Overflow errorcode is now correctly detected when expected.
Subsequent sensor_channel_get() yield the same values, so
the check can be no longer ignored.
Added a sensor_sample_fetch() where missing for correct
sensor_channel_get() calls.
Signed-off-by: Michał Stasiak <michal.stasiak@nordicsemi.no>
Change log level to fixed value coherent with macros used in the
test (LOG_INF). Use context struct to better organize global
variables and improve code readability.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
This test works both with native_posix and native_sim.
native_sim will eventually not set NATIVE_SIM_NATIVE_POSIX_COMPAT
(i.e. not pretend to be native_posix) so let's correct this ifdef
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This region is only required if certain fast peripherals make use of such
region for DMAing. It was now enabled on all builds, often resulting in:
```
[134/134] Linking C executable zephyr/zephyr.elf
Memory region Used Size Region Size %age Used
FLASH: 24372 B 248 KB 9.60%
RAM: 4448 B 256 KB 1.70%
DMA_RAM21: 0 GB 16 KB 0.00% <~~ Not used!
DMA_RAM3x_APP: 40 B 4 KB 0.98%
IDT_LIST: 0 GB 32 KB 0.00%
```
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Align all existing samples/tests/applications which
contains nrf54l15pdk/nrf54l15/* by adding
nrf54l15dk/nrf54l15/* to enable twister builds.
Signed-off-by: Katarzyna Giądła <katarzyna.giadla@nordicsemi.no>
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Current folder name is set to "espressif_esp32" and
might not reflect all kinds of SoCs as such as esp8684.
Rename the folder to "espressif" only.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Fixes bad usage of single backticks in lieu of double backticks for
rendering inline literals, or simple '*' for italics.
When appropriate, a better construct than double backticks has been
selected (ex. :file:, :kconfig:option:, :c:func:, ...), or proper :ref:
have been used if the original intention was to have a link.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Expand testing for QDEC at nrf platforms.
It uses general sensor API,
however there are also nrf driver specific assumptions.
Signed-off-by: Piotr Kosycarz <piotr.kosycarz@nordicsemi.no>
Getting the required alignment size for memory region node
and device node needs to be handled by a separate macro.
Otherwise alignment of single byte is reported for any region.
Add a test that checks for this particular issue.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
After changing dmm to not apply data cache line alignment for all
regions test needs to be aligned.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
`checkpatch.pl` requires that dts sources are indented with tabs,
fix all the spaces that slipped in while checkpatch wasn't watching.
Signed-off-by: Jordan Yates <jordan@embeint.com>
This commit refactors the Intel SSP DAI driver to support dynamic
management of SSP IP. This change additionally separates the management
of the DAI part from the management part of the SSP IP.
Key changes:
- Add new static functions to manage SSP IP power.
- Update the DAI SSP configuration functions to use the new management
approach.
- Update device tree bindings and instances to reflect the new SSP IP
management mechanism.
Signed-off-by: Damian Nikodem <damian.nikodem@intel.com>
Test defines a lopback between i2c driver master and nrfx TWIS slave
to verify their functional correctness.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
