- issue found with Ztest case of test_thread_timeout_remaining_expires
on Intel ISH platform when adjust CONFIG_SYS_CLOCK_TICKS_PER_SEC
to 10k.
- timeout_rem() return exact remaining ticks which is calibrated by
decrease elapsed(), while z_timeout_expires try to get expire ticks
to be timeout using current tick as base, so need get exact current
ticks by plus elasped().
Signed-off-by: Qipeng Zha <qipeng.zha@intel.com>
Configure the sw trigger just after calibration
So the conversion can start on regular channel on the
software control bit.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Fix two issues with sending ICMP Echo Reply for requests sent for
multicast address:
* Use the originator IP address instead of multicast when selecting
source address for the reply
* In case no address match is found, drop the packet, instead of
replying with unspecified address.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The CoAP request handler returns errno codes in the following cases:
* ENOENT if no handler found; respond with 4.04
* ENOTSUP if an unknown request code received; respond with 4.00
* EPERM no handler found for the method; respond with 4.05
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Remove ERROR_QUIET which is a bad idea 99.9% of the time. When any
program makes the effort of using stderr, we _really_ don't want to lose
those error messages.
Using ERROR_QUIET in XCC is even worse because of how high maintenance
XCC is; see another example in 4cba9e6d42 ("cmake: warn the user that
the toolchain cache hides errors")
No one expects error messages to be silently discarded and especially
not people not familiar with CMake (= most people); so hiding the
following error stalled progress for a couple days:
```
Error: there is no Xtensa core registered as the default.
You need to either specify the name of a registered Xtensa core (with
the --xtensa-core option or the XTENSA_CORE environment variable) or
specify a different registry of Xtensa cores (with the --xtensa-system
option or the XTENSA_SYSTEM environment variable).
Executing the below command failed. Are permissions set correctly?
```
Also capture stdout and print it on failure because you never know.
Indent the ` ${CMAKE_C_COMPILER} --version` line in the error message so
CMake does not split that line.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
c++2B standard is not supported for xt clang compiler so
exclude cpp2B testcase for xt-clang toolchain.
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Since the TCP context (and thus net_context) is not dereferenced
directly from the test thread anymore, add a small delay so that TCP
work queue have a chance to run, before checking net_context count or
reusing the port on new allocation.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fix the possible race between TCP work items already scheduled for
execution, and tcp_conn_unref(), by moving the actual TCP context
releasing to the workqueue itself. That way we can be certain, that when
the work items are cancelled, they won't execute. It could be the case,
that the work item was already being processed by the work queue, so
clearing the context could lead to a crash.
Remove the comments around the mutex lock in the work handlers regarding
the race, as it's not the case anymore. I've kept the locks however, as
they do make sense in those places.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If there is any element on filter list it is used for advertising.
This allows to test all scenarios involving allow list (empty, peer
on list, peer not on list).
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
EATT is the only user of `bt_l2cap_chan_send_cb`, and not necessary. We
can maintain the same functionality without it.
Instead of passing and storing the callback into l2cap, we can store it
in a callback queue in the ATT bearer struct.
This will allow us to remove that internal API later, in order to
streamline the l2cap API.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Replace hardcoded value `8` with `CONFIG_BT_CONN_TX_USER_DATA_SIZE`,
that is `8` but is going to change.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
The formatting of the nested list in the I3C header somehow confuses
Doxygen. Explicitly terminate each of the nested lists to avoid this.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Remove stray list item bullets as they confuse Doxygen. Also fix wrong
Doxygen comment block intro.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
If the rdclient is suspended or deregistered any network errors caused
by lwm2m_engine and forwarded by socket_fault handler should not change
the rd client state.
Signed-off-by: Andreas Chmielewski <andreas.chmielewski@grandcentrix.net>
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
If some specific option is not enabled, then add missing
ARG_UNUSED() calls in relevant functions.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Set separate option setters for bool, uint8_t and uint16_t
values. Use those generic setters when storing the desired
option value.
The uint16_t option setter stores the value to uint16_t variable
and expects that user supplies int value.
For uint8_t value, it is expected that uint8_t value is supplied
instead of int.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Set separate option getters for bool, uint8_t and uint16_t
values. Use those generic getters when fetching the desired
option value.
Noticed mixed usage (bool vs int) for txtime option. Changed
the code to use int type like in other options.
The uint16_t option getter gets the value from uint16_t variable
but returns int value to the caller, and also expects that user
supplies int value.
For uint8_t value, it is expected that uint8_t value is supplied
instead of int.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The Transfer Complete flag (TC) is used to check if a transfer is
complete. This mechanism is used before suspending the UART module to
make sure that all data are sent before the suspend procedure.
The UART ISR clears this flag after completion of a async transfer which
causes a hang during UART device suspend setup.
There is just no need to clear this flag in ISR, it is cleared every
time we start a new async transfer.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
One can not even replace sucessfully pytest basic sample `pytest-args`
with command line "--pytest-args", as all it does is to append a single
string to current list of commands, making it impossible to send several
arguments.
This patch fixes that by allowing several instances of `--pytest-args`
to compose the whole list of arguments to be passed to pytest.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
If a platform is fitlered, do not add it to keyed test map, otherwise we
will end up skipping all platforms from the same class without any
coverage.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add boot_partition and slot1_partition for
mimxrt1010_evk and mimxrt1015_evk.
Enable MCUBoot & Flash support for them.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
In case of boards where REF_CLK signal is not connected
to the GPIO0 by default add the possibility to use
the optional GPIO16/GPIO17 as a REF CLK source.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
slab_buff size is calculated based on size of osdp_ephemeral_data union
so it is safer to use same structure for slab init.
Changes in osdp_event or osd_cmd structures can cause crashes without this.
Signed-off-by: Arkadiusz Wadowski <wadowski.arkadiusz@gmail.com>
Simplify and clarify spi_stm32_shift_m by splitting it in
3 smaller functions with clear names.
Signed-off-by: Daniel Gaston Ochoa <dgastonochoa@gmail.com>
In H7, TXP indicates when its FIFO has room for, at least, one
packet. Thus, rename ll_func_tx_is_empty as ll_func_tx_is_not_full,
to be consistent in all platforms.
Signed-off-by: Daniel Gaston Ochoa <dgastonochoa@gmail.com>
Avoind calling startMasterTransfer multiple times in a
transaction by moving it to the transceive() function.
Signed-off-by: Daniel Gaston Ochoa <dgastonochoa@gmail.com>
the FIFO Rx need to have a Minimum memory to works
distributed the rest of the ram_size memory between
the different TX FIFOs except the first which is
a control endtype with max data payload of 64 bytes
Signed-off-by: Marc Desvaux <marc.desvaux-ext@st.com>
Rename the experimental driver overlay to be the same
for all the platforms, and document about it in the boards'
index.rst.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add tests for line splitting in console echo and console_getline()
Signed-off-by: Jakub Michalski <jmichalski@internships.antmicro.com>
Signed-off-by: Mateusz Sierszulski <msierszulski@antmicro.com>
Receiving uart messages like: "\r*\n*\n" ('*' is a wildcard here) resulted
in invalid echo and invalid console_getline() output.
For example after receiving "\rabc\nd\n" uart_console_isr() echoes
"\r\nabcd\r\n" (note that "\r\n" before 'd' is missing) and after calling
console_getline() twice we received "" and "abcd".
uart_console_isr() changes single occurences of '\n' and '\r' to "\r\n" and
to avoid outputting "\r\n\r\n" after receiving "\r\n" it keeps track of the
last character. But it was tracking only the control characters not all
characters so in case of inputs like "\r*\n" the '\n' was omitted because
the last tracked character was '\r'.
Its fixed by tracking last character no matter of its type
Signed-off-by: Jakub Michalski <jmichalski@internships.antmicro.com>
Signed-off-by: Mateusz Sierszulski <msierszulski@antmicro.com>
Add test case to ensure that NET_EVENT_IF_HOSTNAME_CHANGED event is
triggered properly when the hostname changes.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
The zbus_chan_read with K_NO_WAIT was generating a fail in the
qemu_riscv32_smp board. This fix replaces the K_NO_WAIT with a K_FOREVER
on the test, which would not affect the test execution for other
platforms/boards.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
