In the application, after the sysjump, the RX interrupt might remain
enabled. During initialization, once the IRQ is enabled, the RX
interrupt could be triggered if there is any traffic on the RX line,
potentially causing an interrupt storm.
This change disables the UART RX interrupt at the driver initialization
to prevent this issue from occurring.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
The MAX22017 is a two-channel industrial-grade software-configurable
analog output device that can be used in either voltage or current output
mode.
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Add comment to DTS file about SRAM partitions similar to the RTXXX
series has comments.
Add also a doc section to the frdm_rw612 about this.
Also fix the section hierarchy of the frdm_rw612 doc, the header levels
were wrong since the wifi and bluetooth, and reference sections were
under the debugging section.
Group all the wireless connectivity info together.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The broadcast assistant will now validate the content of the
received receive states.
Some modifications were done to the tests to properly
pass these new validations.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Main changes since v2.4:
* libRandv2: New API to fill buffers & Wextra warning fixes
* libCryptov1: Add new AES-ECB API
Note: Like before, bsim remains fully backwards compatible
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Write-back cache after copying VPR's code and data to the destination
memory. It allows VPRs to run from RAM regions cacheable by its host.
It allows to use FLPR in nRF54H20.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
This is a follow up to commit 770482a45a.
Add initialization of the `ok` variable to prevent the "may be
uninitialized" warning when `CONFIG_BOOTLOADER_MCUBOOT` is not
defined.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Have the application enable this feature explicitcly, so that
simple applications do not need to disable this to get the
expected behavior.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Otherwise with its default configuration (25-Hz, 32-level FIFO),
getting individual samples could be up to 1-second old.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
The following fixes have been applied to this decoder:
- The Q-scale factor was fixed, both for full-scale and non
full-scale modes.
- The data-type decoded is struct sensor_three_axis_data, as
it should for read/decode API.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
These tests are quite sensitive to the exact random sequence.
After a change of the native_sim entropy generation 2 of them
started failing. Let's set a random seed which avoids the failure.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix the native_posix fake entropy driver for more than 3 byte requests,
and specially for native_sim//64 builds.
The host random() provides a number between 0 and 2**31-1 (INT_MAX),
so bit 32 was always 0.
So when filling a buffer with more than 3 bytes we would be filling
each 4th byte with a byte which always had its MSbit as 0.
For LP64 native_sim//64 builds, this was even worse, as the driver had
another bug where we assumed random() returned the whole long filled,
and therefore all 4 upper bytes would be 0.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add support for the Antmicro's Myra SiP Baseboard. The board uses
Antmicro's Myra SiP which integrates STM32G491XX MCU and its SoC
configuration.
Signed-off-by: Jakub Wasilewski <jwasilewski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Fix so the compiler does not throw a warning thinking that those
buffers may be used unitialized inside k_pipe_write/read().
Note clang does not the array size being of a variable size and
initialized as it throws a
"error: variable length array folded to constant array as an extension"
The issue was discovered with with gcc 14.2
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix byteorder handling in csip sef crypto function.
On big-endian system we also need to convert the k array from
little-endian to big-endian. The Bluetooth protocol is always using
little-endian ordering.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
P1.7 used for led 0 was not passing gpio_api_1pin test (probably
shortened with another pin in the test setup. Use different pin
that passes the gpio_api_1pin test. At current stage this PDK is
'virtual' so this pin is not attached to any LED and it can be
changed.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
534916c2253 moved some defines from CMakeLists.txt to nrfx_kconfig.h
but those defines are used by MDK which does not include nrfx_kconfig.h
and that broke some nrf platforms (e.g. nrf54l20). Moving those
defines back to CMakeLists.txt.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
When RISCV_SOC_HAS_ISR_STACKING is used, it may
be needed to initialize custom hw stacked esf members.
Some initial values may need to be aligned with
hw stacking mechanism to avoid any side effects.
Signed-off-by: Łukasz Stępnicki <lukasz.stepnicki@nordicsemi.no>
When building with clang and -Wno-gnu it complains about the missing
equals:
tests/lib/smf/src/test_lib_hierarchical_5_ancestor_smf.c:415:8: error:
use of GNU 'missing =' extension in designator
[-Werror,-Wgnu-designator]
[P05] SMF_CREATE_STATE(p05_entry, p05_run, p05_exit, NULL, NULL),
^
=
tests/lib/smf/src/test_lib_hierarchical_5_ancestor_smf.c:416:8: error:
use of GNU 'missing =' extension in designator
[-Werror,-Wgnu-designator]
[P04] SMF_CREATE_STATE(p04_entry, p04_run, p04_exit, &test_states[P05],
^ NULL),
=
tests/lib/smf/src/test_lib_hierarchical_5_ancestor_smf.c:417:8: error:
use of GNU 'missing =' extension in designator
[-Werror,-Wgnu-designator]
[P03] SMF_CREATE_STATE(p03_entry, p03_run, p03_exit, &test_states[P04],
^ NULL),
=
tests/lib/smf/src/test_lib_hierarchical_5_ancestor_smf.c:418:8: error:
use of GNU 'missing =' extension in designator
[-Werror,-Wgnu-designator]
[P02] SMF_CREATE_STATE(p02_entry, p02_run, p02_exit, &test_states[P03],
^ NULL),
=
tests/lib/smf/src/test_lib_hierarchical_5_ancestor_smf.c:419:8: error:
use of GNU 'missing =' extension in designator
[-Werror,-Wgnu-designator]
[P01] SMF_CREATE_STATE(p01_entry, p01_run, p01_exit, &test_states[P02],
^ NULL),
=
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Instead of using rs=1,2,3 and 4 we make it 10, 20, 30, 40 as the
other values could cause some connection issues.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Most specs require the use of extended advertising, and most
tests used legacy advertising.
Implement a common function to create and start an extended
advertising set to reduce code duplication.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add Nordic platforms and rename the defines
to avoid redefining a nrf driver internal symbols
Signed-off-by: Piotr Krzyzanowski <piotr.krzyzanowski@nordicsemi.no>
Add a gh-fetch subcommand to the west patch extension to download a patch
file from Github and generate the patch meta data.
The patch info is appended to the patches.yml file.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This sample is expected to hit google.com so that the reply
(a redirect) is minimal and can easily be visualized. This is also
what sample.yaml expects to see (checks for "The document has
moved").
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
tfm_regression_test depends on the tf-m-tests
tfm_psa_test depends on the psa-arch-tests
This commit set module dependencies to correct values
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Add an array with the states names and use it while logging an error
messages.
Additionally unify the error message format. Do not add
"UART HOST CMD ERROR", because the LOG_ERR macro already informs that
it is an error message.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
- Adds a flash runner configuration for mimxrt1189,
used for sysbuild multi-image projects.
- Avoid unwanted multiple erases and resets.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
When defined both CONFIG_NET_BUF_POOL_USAGE and
CONFIG_MEM_SLAB_TRACE_MAX_UTILIZATION, support using 'net mem' cmd
to get the maximum count of used buffers and net packets.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Add support for the pinnacle_100_dvk and mg100.
With these boards, wait to get on the network before trying
to connect to AWS.
Signed-off-by: Ryan Erickson <ryan.erickson@ezurio.com>
