| .. |
|
adc
|
drivers: adc: nrf: Update adc driver to support nRF9280
|
2024-08-22 14:24:38 -04:00 |
|
audio
|
everywhere: replace double words
|
2024-06-25 06:05:35 -04:00 |
|
auxdisplay
|
build: namespace the generated headers with zephyr/
|
2024-05-28 22:03:55 +02:00 |
|
bbram
|
driver: bbram: npcx: fix the way to clear bbram status
|
2024-06-21 10:07:41 +02:00 |
|
bluetooth
|
drivers: bluetooth: hci: Remove prompt on non user selectable symbols
|
2024-08-26 11:04:45 -04:00 |
|
cache
|
drivers: cache: nrf: enable CACHE_NRF_PATCH_LINEADDR for nRF92
|
2024-08-22 14:24:38 -04:00 |
|
can
|
drivers: esp32: Interrupts flags configuration
|
2024-08-22 14:25:25 -04:00 |
|
charger
|
build: namespace the generated headers with zephyr/
|
2024-05-28 22:03:55 +02:00 |
|
clock_control
|
drivers: clock_control: esp32c6: Fix for USB/JTAG port
|
2024-08-26 11:05:19 -04:00 |
|
console
|
drivers: console: rtt_console: use Segger recommended write API
|
2024-08-12 10:14:34 +02:00 |
|
coredump
|
|
|
|
counter
|
drivers: esp32: Interrupts flags configuration
|
2024-08-22 14:25:25 -04:00 |
|
crypto
|
drivers: crypto: use reset api for crypto peripheral reset
|
2024-07-28 07:31:25 +03:00 |
|
dac
|
drivers: dac: dac_ad569x: Add bit shift for 14/12-bit variants
|
2024-07-11 09:37:12 +02:00 |
|
dai
|
drivers: dai: esai: don't reset ESAI on init
|
2024-08-22 09:10:18 +02:00 |
|
disk
|
disk: sdmmc: power off card in DISK_IOCTL_CTRL_DEINIT
|
2024-08-20 19:42:37 -04:00 |
|
display
|
drivers: display: use zephyr reset api for diyplay
|
2024-08-20 14:50:57 -04:00 |
|
dma
|
drivers: dma: dma_nxp_sof_host_dma: do cache WB after HOST_TO_MEMORY copy
|
2024-08-26 17:06:20 +02:00 |
|
dp
|
driver: swdp_bitbang: hardcode request lut
|
2024-06-14 11:14:17 +02:00 |
|
edac
|
arch: define struct arch_esf and deprecate z_arch_esf_t
|
2024-06-04 14:02:51 -05:00 |
|
eeprom
|
drivers/eeprom/eeprom_simulator: Remove reference to native_posix
|
2024-08-16 09:20:58 +01:00 |
|
entropy
|
drivers: entropy: Initial support for trng driver of RA8
|
2024-08-22 14:24:57 -04:00 |
|
espi
|
style: drivers: comply with MISRA C:2012 Rule 15.6
|
2024-08-20 10:33:51 +02:00 |
|
ethernet
|
drivers: esp32: Interrupts flags configuration
|
2024-08-22 14:25:25 -04:00 |
|
firmware
|
firmware: scmi: add support for pinctrl protocol
|
2024-08-19 10:05:16 -04:00 |
|
flash
|
soc: nxp: Move flexspi log level change to driver
|
2024-08-22 09:14:24 +02:00 |
|
fpga
|
drivers: fpga: add driver for renesas slg471X5
|
2024-08-26 17:06:14 +02:00 |
|
fuel_gauge
|
Drivers: max17048: updated voltage parameter output
|
2024-07-10 11:36:28 +02:00 |
|
gnss
|
drivers: gnss: Handle malloc returning NULL pointer
|
2024-08-02 03:29:18 -04:00 |
|
gpio
|
drivers: esp32: Interrupts flags configuration
|
2024-08-22 14:25:25 -04:00 |
|
haptics
|
drivers: haptics: drv2605: Hard codes open loop mode for LRA mode
|
2024-08-20 14:52:32 -04:00 |
|
hwinfo
|
drivers: hwinfo: esp32c2: Add support
|
2024-08-16 14:08:22 -04:00 |
|
hwspinlock
|
style: drivers: comply with MISRA C:2012 Rule 15.6
|
2024-08-20 10:33:51 +02:00 |
|
i2c
|
i2c: nrfx_twi: fix RTIO utility functions
|
2024-08-23 08:02:45 -04:00 |
|
i2s
|
style: drivers: comply with MISRA C:2012 Rule 15.6
|
2024-08-20 10:33:51 +02:00 |
|
i3c
|
i3c: drivers: check for reserved addresses for i2c scan
|
2024-08-07 07:13:42 -04:00 |
|
ieee802154
|
kconfig: replace known integer constants with variables
|
2024-07-27 20:49:15 +03:00 |
|
input
|
drivers: esp32: Interrupts flags configuration
|
2024-08-22 14:25:25 -04:00 |
|
interrupt_controller
|
drivers: interrupt_controller: nuclei_eclic: always use clic common entry
|
2024-08-26 17:05:53 +02:00 |
|
ipm
|
drivers: esp32: Interrupts flags configuration
|
2024-08-22 14:25:25 -04:00 |
|
kscan
|
input: add a user_data pointer to the callback
|
2024-07-31 12:55:11 +02:00 |
|
led
|
drivers: led: lp5569: run clang-format
|
2024-08-23 15:49:43 +01:00 |
|
led_strip
|
driver: led: add support for TI TLC59731 RGB STRIP controller
|
2024-05-21 16:50:24 -04:00 |
|
lora
|
lora: driver: sx12xx: fix driver recv func when RX error occurs
|
2024-08-05 18:37:11 -04:00 |
|
mbox
|
style: drivers: comply with MISRA C:2012 Rule 15.6
|
2024-08-20 10:33:51 +02:00 |
|
mdio
|
drivers: mdio: shell: add support for stm32 mdio
|
2024-08-21 08:58:29 +02:00 |
|
memc
|
soc: nxp: Move flexspi log level change to driver
|
2024-08-22 09:14:24 +02:00 |
|
mfd
|
drivers: mfd: add new driver "mfd_adp5585"
|
2024-05-08 16:09:08 -04:00 |
|
mipi_dbi
|
drivers: mpi_dbi: Fix wrong bit index for 3wire mode
|
2024-08-19 15:18:09 -04:00 |
|
mipi_dsi
|
everywhere: replace double words
|
2024-06-22 05:40:22 -04:00 |
|
misc
|
build: namespace the generated headers with zephyr/
|
2024-05-28 22:03:55 +02:00 |
|
mm
|
drivers: mm/intel_adsp: Add MMU support to MM driver
|
2024-06-04 13:40:04 +02:00 |
|
modem
|
drivers: modem: cellular: hl7800 fix enter cmux
|
2024-08-14 15:51:04 -05:00 |
|
mspi
|
drivers: update AMBIQ drivers to use proper base address
|
2024-08-11 19:18:09 -05:00 |
|
net
|
drivers: nsos: fix resource leak in nsos_adapt_accept() error path
|
2024-07-05 18:44:13 +02:00 |
|
pcie
|
kernel: mm: rename z_phys_un/map to k_mem_*_phys_bare
|
2024-06-12 21:13:26 -04:00 |
|
peci
|
build: namespace the generated headers with zephyr/
|
2024-05-28 22:03:55 +02:00 |
|
pinctrl
|
drivers: pinctrl_imx: support i.MX93 M33 core
|
2024-08-22 09:15:16 +02:00 |
|
pm_cpu_ops
|
|
|
|
power_domain
|
power_domain: intel_adsp: Use register definitions
|
2024-05-24 09:53:04 -05:00 |
|
ps2
|
style: drivers: comply with MISRA C:2012 Rule 15.6
|
2024-08-20 10:33:51 +02:00 |
|
ptp_clock
|
drivers: ptp_clock_nxp_enet: add module_dev to driver config
|
2024-07-09 17:20:12 -04:00 |
|
pwm
|
drivers: esp32: Interrupts flags configuration
|
2024-08-22 14:25:25 -04:00 |
|
regulator
|
style: drivers: comply with MISRA C:2012 Rule 15.6
|
2024-08-20 10:33:51 +02:00 |
|
reset
|
drivers: reset: Add NXP RSTCTL driver
|
2024-05-21 16:49:42 -04:00 |
|
retained_mem
|
drivers: retained_mem: nrf: implement using nrfx_ram_ctrl helper
|
2024-08-14 12:35:17 -04:00 |
|
rtc
|
drivers: rtc: off-by-one error in RV-8263-C8 driver
|
2024-08-22 14:21:41 -04:00 |
|
sdhc
|
drivers: esp32: Interrupts flags configuration
|
2024-08-22 14:25:25 -04:00 |
|
sensor
|
drivers: sensor: st: vl53l1x: add return to attr_set and attr_get
|
2024-08-23 08:02:23 -04:00 |
|
serial
|
drivers: esp32: Interrupts flags configuration
|
2024-08-22 14:25:25 -04:00 |
|
sip_svc
|
|
|
|
smbus
|
build: namespace the generated headers with zephyr/
|
2024-05-28 22:03:55 +02:00 |
|
spi
|
drivers: spi: esp32c2: esp8684: Add support
|
2024-08-26 17:06:02 +02:00 |
|
syscon
|
|
|
|
tee
|
kconfig: replace known integer constants with variables
|
2024-07-27 20:49:15 +03:00 |
|
timer
|
drivers: esp32: Interrupts flags configuration
|
2024-08-22 14:25:25 -04:00 |
|
usb
|
drivers: usb device: Remove MCUX controller type
|
2024-08-22 09:14:24 +02:00 |
|
usb_c
|
drivers: usb_c: numaker: support Nuvoton's M2L31 series
|
2024-08-01 12:38:53 +02:00 |
|
video
|
drivers: video: ov2640: Add 240x240 video format
|
2024-08-26 17:06:28 +02:00 |
|
virtualization
|
kernel: mm: rename z_phys_un/map to k_mem_*_phys_bare
|
2024-06-12 21:13:26 -04:00 |
|
w1
|
drivers: w1: Ensure DQ pin is both input and output.
|
2024-05-29 07:34:29 +02:00 |
|
watchdog
|
drivers: esp32: Interrupts flags configuration
|
2024-08-22 14:25:25 -04:00 |
|
wifi
|
mbedtls: rename CONFIG_MBEDTLS_ZEPHYR_ENTROPY and move it
|
2024-08-24 07:16:51 -04:00 |
|
xen
|
style: drivers: comply with MISRA C:2012 Rule 15.6
|
2024-08-20 10:33:51 +02:00 |
|
CMakeLists.txt
|
firmware: introduce SCMI core support
|
2024-08-19 10:05:16 -04:00 |
|
Kconfig
|
firmware: introduce SCMI core support
|
2024-08-19 10:05:16 -04:00 |
9938022eff