Jeff Epler c86e552d7f Allow a jumper to enable booting directly to passthrough mode ... Connect the SDA/SCL pins with a jumper or low value (e.g., 1K) resistor to enable passthrough mode. Disconnect the jumper to return to normal mode. These are pins 7/8 on the 10-pin connector, so they are convenient to short with a standard .100 jumper block.		2018-07-06 20:36:44 -05:00
..
RFout1MHzV1_05.ino	Allow a jumper to enable booting directly to passthrough mode	2018-07-06 20:36:44 -05:00