The LLEXT Extension Development Kit, mostly implemented in
'cmake/llext-edk.cmake', is already part of the 'llext' area of the
MAINTAINERS file, but its test is currently unowned.
Add the missing directory to the 'llext' area.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Recently, the "Generated zephyr.dts" message started being shown twice,
because of some now redundant code that was left behind by commit
fe3287a9ac.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Marked the irq-gpios property as "required: true" in the yaml file.
This ensures that the property is always defined in the device tree,
preventing the driver from crashing when irq-gpios is missing.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Currently the timer_behavior test uses fabs.
Since the C library functions being used in the kernel
is restricted in Rule A.4 in the Coding Standard
We should probably not use these functions in tests either.
Signed-off-by: Robin Kastberg <robin.kastberg@iar.com>
What is the change?
- Fixes#83660 allowing device to now enter suspend mode even if
CONFIG_DEBUG_THREAD_INFO is enabled.
Why is this needed?
- z_sys_post_kernel was cleared as part of #d778d5c
to "allow debuggers to display the correct thread state after
the first 3 instructions have run".
This is not required while resuming from suspend and
it prevents the device from entering suspend so,
move it out of resume path.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
The DMA-based path of the lpspi driver is basically
almost a driver of it's own, move it to it's own file.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
There is (almost) a whole separate driver for RTIO,
move this code to its own file and move shared code
and definitions to a common file.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Move this driver to its own subfolder to organize it
since there will be new files added for this hardware.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Fixup payload_index to be uint16_t to avoid index overflow.
Do not remember why ptc is 4 bits, where as it must be 5 bit
value similar to nse; added an assertion check until it is
fixed.
Fix ISO Broadcaster and ISO Sync Receiver for PTO > 1 and
use of Pre-Transmission Group Counts.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add back the implementation in the Controller that tries to
enable pre-transmissions to improve time diversity to aid a
remote ISO Sync Receiver role device.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
For pre-transmission groups > 1, the broadcaster link layer would fetch
incorrect payloads from the TX node queue.
Update payload index calculation to reference correct TX payload. Fix
PTO FIXMEs and range checks.
Signed-off-by: Morten Priess <mtpr@oticon.com>
MESH PTS tests require different number of keys, as an example; only
one netkey requires 8 key slots and there are test cases that use at
least two netkeys which consume the default 16 slots, so it is better
to have enough slots all times. Setting slot count to 32.
Signed-off-by: alperen sener <alperen.sener@nordicsemi.no>
* Move all KConfig configuration from CMake to `nrfx_kconfig.h`
* Move macro utils from `nrfx_kconfig.h` to `nrfx_zephyr_utils.h`
* Move GRTC channels allocation from `nrfx_kconfig.h` to
`nrfx_reserved_resources.h`
Signed-off-by: Marcin Szymczyk <marcin.szymczyk@nordicsemi.no>
There is no reason to duplicate `nrfx_config_*.h` files.
Use configuration files from `hal_nordic/nrfx/templates`.
Signed-off-by: Marcin Szymczyk <marcin.szymczyk@nordicsemi.no>
Add SPIRAM noinit output sections on related targets so the user can
allocate variables with macros EXT_RAM_BSS_ATTR and EXT_RAM_NOINIT_ATTR.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Without this fix I get an MPU fault in samples/net/openthread/shell/
with CONFIG_IEEE802154_DRIVER_LOG_LEVEL_DBG=y.
Related commit: a7224830ce
Signed-off-by: Martin Jäger <martin@libre.solar>
Add hwinfo driver for Silicon Labs Series 2 devices. The driver
is separate from the Series 0/1 Gecko driver because the available
reset causes are completely different.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Relocate the `power-states` node from under the `soc` node to
the `cpus` node, making it consistent with other STM32 SoC series.
This resolves the device-tree warning:
(simple_bus_reg): /soc/power-states: missing or empty reg/ranges property.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This PR fixes the issue that building the driver with either
CONFIG_RTC_CALIBRATION=y or CONFIG_RTC_ALARM=y and without
'int-gpios' used will cause
'undefined reference to `rv8803_write_reg8'' error.
Signed-off-by: Marcin Lyda <elektromarcin@gmail.com>
Rename the primary_source, secondary_source,
filter_count and filter_period property to
primary-source, secondary-source, filter-count
and filter-period in the devicetree and bindings
of the counter subsystem.
Signed-off-by: James Roy <rruuaanng@outlook.com>
Rename the following properties in binding and overlay:
-- primary_source => primary-source
-- secondary_source => secondary-source
-- filter_count => filter-count
-- filter_period => filter-period
Signed-off-by: James Roy <rruuaanng@outlook.com>
Commit:
- adds dependency of the mbedtls psa usage on secure storage
- removes PSA ITS emulator and enables usage of
the secure storage in ble mesh bsim tests
- enables secure storage in all ble mesh and related samples
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Some time ago a new shim for nRF UARTE was added (uart_nrfx_uarte2.c)
which used nrfx_uarte.c driver underneath. It was supposed to support
nrf54x platforms. However, later on legacy driver (uart_nrfx_uarte.c)
was extended to support nrf54x platforms and it takes less code size,
has better performance and more features. Shim uart_nrfx_uarte2 will
no longer be supported. As new shim is the default and there is a
Kconfig to pick the legacy shim (CONFIG_UART_NRFX_UARTE_LEGACY_SHIM=y)
it cannot be deprecated in the normal way. Additional Kconfig option
is created (DEPRECATED_UART_NRFX_UARTE_LEGACY_SHIM) which is enabled
if CONFIG_UART_NRFX_UARTE_LEGACY_SHIM=n and it selects DEPRECATED.
A warning was also added to the CMakeLists.txt.
Patch removes use CONFIG_UART_NRFX_UARTE_LEGACY_SHIM in tests.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
This commit removes the `ctx_shell` declaration from the Bluetooth shell,
marking a milestone in eliminating this dependency.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This change aims to eliminate the dependency on `ctx_shell` in
the Bluetooth `classic/shell/*`, making the code more maintainable.
Replaced `shell_*` functions that depended on `ctx_shell` with
the appropriate `bt_shell_*` functions.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This change aims to eliminate the dependency on `ctx_shell` in
the Bluetooth `mesh/shell/*`, making the code more maintainable.
Replaced `shell_*` functions that depended on `ctx_shell` with
the appropriate `bt_shell_*` functions.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This change aims to eliminate the dependency on `ctx_shell` in
the Bluetooth `audio/shell/*`, making the code more maintainable.
Replaced `shell_*` functions that depended on `ctx_shell` with
the appropriate `bt_shell_*` functions.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Relocated `bt_shell_private.c` to the `common` folder to enable
independent use between `BT_SHELL` and `BT_MESH_SHELL`.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Pass the report buffer originally provided in hid_device_submit_report()
as a parameter to input_report_done() callback. Example use case is to
enable HID report multi buffering which is easiest achieved by
allocating report buffer before submitting it and then releasing the
buffer after it has been sent.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
'wifi status' CMD shows wrong security information when STA connects to
Ext-AP with WIFI_SECURITY_TYPE_SAE_HNP, after connection using
WIFI_SECURITY_TYPE_SAE_AUTO. Setting sae_pwe for all the WPA3 SAE types
can fix this issue.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
In order to ensure that watchdog channels are freed in proper
driver state, synchronization in form of simple loop needs
to be added after stopping. In no irq variant, it is already done
on nrfx level. NRFY function can be replaced by NRFX one in
the future.
Signed-off-by: Michał Stasiak <michal.stasiak@nordicsemi.no>
Simplifies GPIO reset logic in `phy_mc_ksz8081_reset()` by introducing
a dedicated function, `phy_ksz8081_reset_gpio`. If this function returns
`-ENODEV`, it will fall back to using a command-based reset instead.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Simplifies error handling in `phy_mc_ksz8081_get_link()` by
centralizing mutex unlocking with a `done` label.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Link layer needs some fixing before hci driver can be minimally configured
and hence must revert conditional inclusion of core functionalities untill
new link layer is available.
Signed-off-by: Petri Pitkanen <petri.pitkanen@silabs.com>
Several driver setting were as defines in driver file which made hard to
change by application programmers. Fixed by adding
silicon labs specific Kconfig file for bluetooth driver configurations.
Also some cleaning for handling Kconfig conditional to conform
preferred style.
Signed-off-by: Petri Pitkanen <petri.pitkanen@silabs.com>
This sample is designed specifically for the STM32 family.
With this filter, tests on other vendors' platforms will
be skipped.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Add new fields to the `esp_image_load_header_t`
* provide IROM and DROM fields to fix debugging features
* extend the header to up to 96 Bytes for future use
Signed-off-by: Marek Matej <marek.matej@espressif.com>
