Make kscan init priority higher, since it is lower than some buses like
I2C, making some devices to fail initialization if not tuning
priorities.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Allow caller to specify microsecond accuracy and not convert
to milliseconds.
Fixes#36072
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make zsock_select() a syscall so that the following commit
can call the internal poll implementation directly. This is
needed as zsock_select() will not call zsock_poll() directly
in order to allow select to use microsecond timeout accuracy.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
GPIOTE1 on the nRF5340 SoC is always accessible as a non-secure
peripheral. However, it is only defined in the non-secure DTSI file.
This is therefore a missing node in the secure DTSI file, since
non-secure addresses are accessible by secure software.
Move the node definition to a common include file and pull it into the
app core DTSI as well. To keep things clean, adjust the node labels so
that:
- 'gpiote0' and 'gpiote1' are defined in the secure DTSI
- 'gpiote0' is not defined in the non-secure DTSI
- 'gpiote' is defined in both secure and non-secure DTSIs
- 'gpiote' refers to the same node as 'gpiote0' in the secure DTSI
- 'gpiote' refers to the same node as 'gpiote1' in the non-secure DTSI
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The sram1 node in nrf5340_cpuapp.dtsi represents the SRAM accessible
to the network core on the SoC.
However, while the network core can access the app core's SRAM, the
app core cannot access the net core's SRAM. Therefore, the sram1 node
should only appear in DTSI files for the net core, and not the app
core.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Because it is not always possible to determine whether
a request is for Audio class or not, all requests are passed
to it. This can lead to the requests, to e.g. HID interface,
being hijacked by Audio class.
Ignore return value of Audio custom handler as it is not relevant here.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Since the settings are stored in the core now,
we can remove REQ_GET_INTERFACE part from custom handler
and simplify the code. Return value is no longer relevant
since custom callback does not need to interfere with the
request handling process.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Store alternate interface settings and
return alternate on GetInterface request.
Fixes: #24200
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This option is deciding whether bootutil_public library supports
multi-image procedures. MCUboot have its own definition which is
unavailable zephyr application. Introduced option declares similar
option for the application.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add boot_write_confirm_multi() and boot_request_upgrade_multi() APIs so
that the user can set the image with given index as pending, confirmed.
This is needed for enabling the mcuboot multi-mage boot feature by
the zephyr.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Change Highlights:
- Fix error check after `k_work_reschedule_for_queue`. A value of 1
means job was scheduled which was resulting in a ton of "<err>
wifi_eswifi: Rescheduling socket read error" logs getting printed
due to the erroneous check
- When using the B-L475E-IOT01A, attempts to use a TLS socket result
in a hang when socket offload is enabled so I'd like to have a way
to disable the option. To accomplish this, I I switched the
`CONFIG_NET_SOCKETS_OFFLOAD=n` Kconfig option from `select` to
`imply`.
- There was a missing `net_context_set_state()` call when
`CONFIG_NET_SOCKETS_OFFLOAD=n`. I applied the same fix from #30664
for this case to fix the issue.
Signed-off-by: Chris Coleman <chris@memfault.com>
This commit adds the flash driver for nucleo_f207zg platform.
This has been tested with flash test application.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit enables flash support for nucleo-f207zg in device tree.
The last sector of 128KB is used as storage partition.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This is a follow-up to commit 60d9988401.
Add a third option for the HFXO capacitance that keeps the default
value of the XOSC32MCAPS register untouched. The message in the above
commit incorrectly claimed that external load capacitors for HFXO
(the reset value of the XOSC32MCAPS register) was the configuration
in effect before. In fact, the register value was modified during
the device trimming in the SystemInit() function to use the internal
capacitors, and that is the configuration required for proper RADIO
operation on nRF5340 DK, for instance.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Sphinx provides a way to persist data across builds: the
BuildEnvironment. The build environment is automatically managed by
Sphinx, so there is no need to take care of loading/dumping cache files.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use file hashes instead of paths and modification times. This method is
fits better on systems using cache mechanisms. Note that hash is
computed using content obtained in UTF-8 text mode for portability
reasons.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Document that calling settings_load is required when the application is
not creating and managing the identities of the stack itself.
The application will not be able to use all features of the stack before
the identities have been loaded.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
We do not need the return value of k_sem_take() so ignore it.
Coverity-CID: 236602
Fixes#36313
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We were testing modified_tags.args before we called get_twister_opt.py
so it would never have been created and thus twister_exclude_tag_opt
would never get set correctly. Move the check to after we call
get_twister_opt.py
Also we need to remove modified_tags.args once we are done with it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
CONFIG_DEBUG_OPTIMIZATIONS should not be enabled by default in
prj.conf for tests or samples. Remove it from a few places that it
is.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When the host toolchain is used, `-nostdlib` option is not specified
and therefore all default libraries, including the libgcc and its
components, are automatically linked -- so it is not necessary to
manually link them here.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The host toolchain makes use of the host toolchain libraries (i.e.
`-nostdlib` is not specified), so it is not necessary to detect the
toolchain libgcc path and specify one manually.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the build system to always detect the libgcc path
for the host platforms regardless of the target architecture.
The native_posix_64 target previously used the x32 ABI (`-mx32`) and
the multilib for this ABI was not commonly available in the x86-64 host
toolchains.
That is no longer the case because native_posix_64 had been updated to
use the x86-64 ABI (`-m64`).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit removes the `NOT no_libgcc` condition for the automatic
libgcc path detection.
The `no_libgcc` variable was previously set in this file to exclude
libgcc detection for the x86-64 targets because the x86-64 arch used
x32 ABI (`-mx32`) and the multilib for this ABI was not commonly
available. This is no longer the case (x86-64 targets now use `-m64`)
and libgcc must always be available.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
It is necessary to put the device in standby to change the contents of
CTRL_REG1. This register is used to change the sampling frequency.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add C++ area, which covers the C++ language support subsystem and the
relevant tests and samples, with myself as a maintainer.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add "CMSIS-DSP integration" area, which covers the module configs and
tests for the CMSIS-DSP library, with myself as a maintainer.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Adding myself as a maintainer for the "C library" area covering both
the minimal libc and newlib, and updating the list of the relevant
files.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Include the lpcxpresso55s69_ns board to the list of platforms
that support running the sample for the TF-M regression tests.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This will let us get compiler warnings whenever the return value of
specific functions stays unused. I called this __must_check since that's
the name Linux uses as well.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fixes: #36185
CMake >=3.20 now supports relative paths in Ninja depfiles.
As Zephyr still supports the use of CMake 3.13, and the current use of
DEPFILE in linker/ld/target.cmake is already absolute path, then the
safest choice is to use old behavior.
This can be changed when Zephyr increases minimum required CMake to be
3.20 or newer.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
If all connections were refused, we haven't reached part of
le_ecred_conn_req with connecting channels - thus i was never
incremented. PDU shall be created always with the length containing
full size of scid array - we always respond with all of the CIDs filled,
they just will be all zeros when all connections were refused.
This was affecting L2CAP/ECFC/BV-26-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
