* Add support for the extra 16 GPIO pins in the menus and core.
* Clean up Generic RP2350 PSRAM ("none" is valid) and flash (other than 16MB) options.
* Add extra GPIO<->peripheral connections
* Add Pimoroni PGA2350 RP2350B-based board
* Pins 32-47 can be used for PIOPrograms
* Avoid hang when PSRAM fails to initialize
* Move libpico to an RP2350B board for SDK (otherwise the SDK drops all GPIOHI support)
SWSerial wasn't even building due to a typo in the header, and SerialPIO
needs to set the OE-invert flag after PIO initialization for transmit.
Fixes#2419
Use real GPIO pad inversion to allow inverted RX, TX, and controls for
the hardware UART and software PIO-emulated serial ports.
Adds ``setInvertTX(bool)`` and ``setInvertRX(bool)`` calls to both ports,
with ``setInvertControl(bool)`` for the HW UARTS.
* Fix Pio MHZ for RP2350, fix RP2350 generic menus
* Clean up platform.txt IPV4 default
Was never used, but should at least exist for sanity's sake
Fixes#2365
* Migrate RP2040-specific bits to separate dirs
* Add chip to boards.txt, isolate RP2040-specifics
* Add RP2350 boot2, bearssl, and libraries
* Platform.IO adjust to new paths
* Add RPIPICO2 JSON for P.IO
* Add RP2350 to Platform.io
* Update Picotool and OpenOCD for all hosts
* Use picotool to generate UF2s
* Build separate libpico blobs serially
Thanks for the review, @aarturo182 !
* Add RP2350 to CI
* Allow Ethernet/WiFi building for RP2350
* Update Adafruit TinyUSB to latest
* Test skip fix
* Make RP2350 Picotool work. update USB ID
* Fix EEPROM/FS flash locations
RP2350 adds a 4K header sector to the UF2, meaning we have 4K less total
flash to work with. Adjust all constants appropriately on the RP2350.
* Adds ilabs board and PSRAM support. (#2342)
* Adds iLabs boards and basic PSRAM support.
* Make PSRAM come up as part of chip init
Uses SparkFun psram.cpp to set timings on clocks which are defined in the
variant file. Prefix things with RP2350_PSRAM_xxx for sanity.
Users don't need to call anything, PSRAM "just appears". Still need to
add in malloc-type allocation.
* Add board SparkFun ProMicro RP2350
Same pinout as the SparkFun ProMicro RP2040 with 8MB PSRAM and RP2350
* Add TLSF library for use w/PSRAM
Fork of upstream to include add'l C++ warning fixes.
* Add pmalloc/pcalloc to use PSRAM memory
free() and realloc() all look at the pointer passed in and jump to the
appropriate handler. Also takes care of stopping IRQs and taking the
malloc mutex to support multicore and FreeRTOS (when that workd)
* Fix BOOTSEL for RP2350
* Add simple rp2040.idleOtherCore test
* Add Generic RP2350 and clean up PSRAM menus
Commercial boards now only have 1 size PSRAM, no need to have menu for them.
* Add Solder Party RP2350 Stamp boards (#2352)
* Add PSRAM heap info helpers, mutex lock mallinfo
* Add RP2350 docs
* FreeRTOS and OTA unsupported warnings for RP2350
* Update to 2.0.0 SDK
* Board type needs to be set before earliest SDK setup
* Platform includes update
* Boot2 files
* Simple compilation issues
* Build and link
* PIO rebuild with version
* Newlib wrapper update
* Force inclusion of runtime_init_* fcns
The linker was dropping all references to the library's included
runtime_init_xxx functions and hence things like the IRQ vector
table and mutexes and alarms weren't properly set up leading to
instant crashes on start up..
Explicitly call out one function from the object file stored in
the .A to force the inclusion of all the functions. May be a better
way, heppy to hear any ideas.
* Fix SPI GPIO calls
* Fix Ethernet GPIO
* Remove SDK warnings
Remove the skipped error messages once the following PR merged:
https://github.com/raspberrypi/pico-sdk/pull/1786
* BTStack moved SBC encode/decode paths
* Platform.IO fixes
* BT No longer has special absolute mouse
* Rebuild and update OTA
* Rebuild BearSSL, too
* Update liker file to latest SDK
* Clean up libpicocmake
* Clean up LWIP/BT library names
* Add VFS to enable POSIX file I/O operations
Enables use of FILE * operations on internal and external storage. fopen,
fclose, fseek, fprintf, fscanf, etc. supported.
* Add FS/File::stat and support POSIX stat/fstat
Removed FS::info64, and updates FS::info with the 64-bit version since in
2024 it's almost impossible to get a SD card smaller than 4GB.
Most code can simply replace info64 with info and continue operation, if they
were updated to be 64-bit in the first place.
RP2040::memcpyDMA implements a DMA-controlled memory copy call identical in
function to standard memcpy, but using an onboard DMA engine. For large
memory transfers this can be significantly faster than using the CPU-based
memcpy. Only 4-byte aligned source, destination, and counts are allowed.
If any inputs are not 4-byte aligned, then standard memcpy will occur so
it will behave correctly for any inputs.
