Trust that the protocol type is set correctly by functions
called before this one. We should not set the protocol type
blindly in this generic function.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The ARP code has set the protocol type of the packet to
0x806, so do not change it when preparing to send to 0x800
which is the IP protocol type. Lets trust the previously
called functions to set the ptype correctly and do not set
it here.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
It was incorrectly introduced earlier and not really needed
because the test will pass without it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Print more data / debug information for ARP messages.
Also remove unnecessary "&" when printing IPv4 address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The work in Ethernet send in commit 2f10d7d816
("net: ethernet: Set the ptype by the caller in send")
introduced a bug because we could try to do ARP resolving
for ARP packets too. This is clearly a wrong thing to do.
So before trying to do ARP resolving, make sure the the
packet type is IP packet.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Fix reset of drift_skip count when an anchor point sync was
missed so that drift compensation is applied on the next
successful anchor point sync. This will improve connection
stability for short overlapping radio event intervals.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In order to allow a custom disk name same as with the standard
sdmmc driver an additional device-tree property was introduced.
Signed-off-by: Carlo Kirchmeier <carlo.kirchmeier@zuehlke.com>
Split the USART driver into separate implementations for Silabs Series 2
and Series 0/1 boards. This change improves maintainability (especially
with the support of pin-ctrl and clock-ctrl on series 2 boards).
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
Add the nucleo_wba55cg board, which implements continuous transfer
with GPDMA and a linked list.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Currently, when disabling CONFIG_MODBUS_FP_EXTENSIONS,return variable
'err' is not initialized (at least not for debug builds) but later on
checked.
Signed-off-by: Stephan Gatzka <stephan.gatzka@gmail.com>
uart_irq_callback_user_data_set return non-zero if the callback function
can't be set. This might happen if you forgot to enable
CONFIG_UART_INTERRUPT_DRIVEN.
Signed-off-by: Stephan Gatzka <stephan.gatzka@gmail.com>
Updated the README for the LoRaWAN Class A example to explain limitations
when running multiple times. Provided guidance to resolve the issue.
Signed-off-by: Flavio Felder <felf@zhaw.ch>
Sets LinkServer as the default runner for the mimxrt1180-evk board,
as the board is configured for CMSIS-DAP by default.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
DMA transfers are supposed to write to buffer tail. Use the proper
pointer to make multipart DMA transfers actually write the data to the
intended location.
The issue was observed on control write transfers where the OUT Data
Stage was at least 128 bytes (because endpoint 0 transfer width is
limited to 7 bits).
The issue is unlikely to happen on non-control transfers because the
transfer size width is at least 11 bits (at most 19 bits) and packet
size counter is at least 4 bits (at most: 10 bits) which means that
at least 2048 byte transfer spanning at least 15 packets (or at least
524288 byte spanning 1023 packets for 19 bits transfer size counter
and 10 bits packet counter) is required to necessitate multipart DMA.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Prepare buffer to receive SETUP data on OUT endpoint 0 after endpoint
halt. This solves the issue where the device would no longer process any
control transfers after the first failed transfer with too large OUT
Data Stage (when processing failed due to data stage buffer allocation
failure).
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
The DOEPTSIZ0 XferSize field is 7 bits long, meaning that maximum single
transfer can be 127 bytes long. Configure the control write (OUT)
transfers considering the XferSize field size to support transfers with
data stage larger than 127 bytes.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Since some platforms may have some lpuart that are wrapped in lpflexcomm
and some that are not, then change the init code to determine how to
connect the interrupt on an instance basis.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Determine if lpflexcomm wrapped lpi2c by instance and connect
irq differently dependending on that to support platforms with
both flexcomm wrapped and unwrapped lpi2c's.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Determine proper irq setup depending whether the spi is wrapped in an
lpflexcomm or not on an instance basis since some platforms have some
wrapped and some not.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The tests for settings will not work properly with just provided config
file for mimxrt1020:
west build -p always -b mimxrt1020_evk samples/subsys/settings
as there the settings_save_one() would return -2 (-ENOENT) as by default
the CONFIG_SETTINGS_NONE is defined for mimxrt1020 configuration.
For proper operation (i.e. to have a memory medium to store settings
values) the NVS backend needs to be enabled.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Add the appropriate mass erase command for STM32 SoC families.
Family to command mapping taken from:
https://openocd.org/doc/html/Flash-Commands.html
Signed-off-by: Jordan Yates <jordan@embeint.com>
Add support for the `--erase` option on `west flash`, for boards that
specify at least one `--cmd-erase` option.
Signed-off-by: Jordan Yates <jordan@embeint.com>
CONFIG_UDC_BUF_FORCE_NOCACHE depend on NOCACHE_MEMORY && DCACHE in Kconfig,
so it can only be true when the platform supports cache.
The controller driver can imply the value of CONFIG_UDC_BUF_FORCE_NOCACHE,
like UDC_NXP_EHCI. If CONFIG_UDC_BUF_FORCE_NOCACHE is true, then all the
usb transfer buffer should be in noncache section.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
In order to show how to use OpenThread and CoAP, add an application.
This example could be build to run a client or server.
The server could expose LEDs and buttons and client could get their
state and set the LEDs state.
The network is created automatically using the network key predefined
in the config. The goal is to make the example simple by removing
the commisionning and joinning process.
If a client application has a button, it could use it to toggle the first
LED on any boards running the server application.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
- insert various additional information content
- use tabs to distinguish board versions
- west flash is now usable for flashing
- show steps for using USB-console
- move images to img subfolder
Signed-off-by: Bernhard Krämer <bdkrae@gmail.com>
The on-board S26HS512T 512M-bit HyperFlash memory is connected to
the QSPI controller port A1.
This board configuration selects it as the default flash controller.
Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
Add support HyperFlash memory devices on a NXP S32 QSPI bus.
This driver uses a fixed LUT configuration that defined in HAL RTD
HyperFlash driver.
Driver allows to read, write and erase HyperFlash devices.
Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
Create common source code to use for supporting HyperFlash.
Rename 'FLASH_NXP_S32_QSPI_NOR_SFDP_RUNTIME' to
'FLASH_NXP_S32_QSPI_SFDP_RUNTIME' as a common kconfig.
Add the 'max-program-buffer-size' property to use for
setting memory pageSize, instead of using
'CONFIG_FLASH_NXP_S32_QSPI_LAYOUT_PAGE_SIZE' for setting.
Add the 'write-block-size' propertyto use for setting
the number of bytes used in write operations, it also
uses to instead of the 'memory-alignment' property.
Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
Following the commit f98fde07b3, DT_REG_ADDR now expands with a 'U'
suffix as an unsigned value. However, for compatibility with IS_EQ,
a raw value without any suffix is required. Therefore, this update is
necessary.
Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
The TMP435 is a remote temperature sensor monitor
with a built-in local temperature sensor.
Signed-off-by: Jaakko Rautiainen <jaakko.rautiainen@bittium.com>
Set ctrl9_xl.device_conf bit to 1 in ism330dhcx_init_chip()
prior to start device configuration, as stated in paragraph
9.20 of the datasheet.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
cmake: Added "-" support to EXTRAVERSION.
Added to the regex and update the documentation.
Also updated the examples in the documentation.
Signed-off-by: Nick Brook <nrbrook@gmail.com>
cmake: Allow semver style EXTRAVERSION
Semver versions are commonly in the form X.X.X-a.1, X.X.X-beta.2, etc.
However, currently EXTRAVERSION cannot include ".". This change allows it.
Signed-off-by: Nick Brook <nrbrook@gmail.com>
The connection event at the connection update instant was
skipped due to previous ticker node in use that is being
stopped was registering a relative occupied time that
overlapped with the new ticker node being started for
scheduling the connection with new interval.
Added mock interface for ticker_stop_abs() hence needed by
the Controller unit testing.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a test validating that Zephyr can compile with the 3 underlying
filesystems enabled with only `CONFIG_FILE_SYSTEM_LIB_LINK` enabled.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Update the Kconfig configuration to allow enabling the underlying
filesystems (e.g. exFAT), with only `FILE_SYSTEM_LIB_LINK` enabled.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The compiler is unaware of the `block_size > 0` precondition, so it
outputs warnings of uninitialized `reclen`. Explicitly initialize the
variable to suppress this.
Signed-off-by: Jordan Yates <jordan@embeint.com>
